This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inerti...This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.展开更多
The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sens...The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.展开更多
A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The te...A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.展开更多
Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such lan...Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such language is spoken language in nature, thus it is worthwhile to analyze this special phaenomenon in lexical and grammatical level.展开更多
Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squ...Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squares support vector machine(LS-SVM) algorithm is an improved algorithm of SVM.But the common LS-SVM algorithm,used directly in safety predictions,has some problems.We have first studied gas prediction problems and the basic theory of LS-SVM.Given these problems,we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm,based on LS-SVM.Finally,given our observed data,we used the on-line algorithm to predict gas emissions and used other related algorithm to compare its performance.The simulation results have verified the validity of the new algorithm.展开更多
We demonstrate a simple scheme of 6.835 GHz microwave source based on the sub-sampling phase lock loop(PLL). A dielectric resonant oscillator of 6.8 GHz is directly phase locked to an ultra-low phase noise 100 MHz ove...We demonstrate a simple scheme of 6.835 GHz microwave source based on the sub-sampling phase lock loop(PLL). A dielectric resonant oscillator of 6.8 GHz is directly phase locked to an ultra-low phase noise 100 MHz oven controlled crystal oscillator(OCXO) utilizing the sub-sampling PLL. Then the 6.8 GHz is mixed with 35 MHz from an direct digital synthesizer(DDS) which is also referenced to the 100 MHZ OCXO to generate the final6.835 GHz signal. Benefiting from the sub-sampling PLL, the processes of frequency multiplication, which are usually necessary in the development of a microwave source, are greatly simplified. The architecture of the microwave source is pretty simple. Correspondingly, its power consumption and cost are low. The absolute phase noises of the 6.835 GHz output signal are-47 d Bc/Hz,-77 dBc/Hz,-104 dBc/Hz and-121 dBc/Hz at1 Hz, 10 Hz, 100 Hz and 1 kHz offset frequencies, respectively. The frequency stability limited by the phase noise through the Dick effect is theoretically estimated to be better than 5.0 × 10^-14τ^1/2 when it is used as the local oscillator of the Rb atomic clocks. This low phase noise microwave source can also be used in other experiments of precision measurement physics.展开更多
The energy contents of biogas could be significantly enhanced by upgrading it to vehicle fuel quality.A pilot-scale separation plant based on carbon hollow fiber membranes for upgrading biogas to vehicle fuel quality ...The energy contents of biogas could be significantly enhanced by upgrading it to vehicle fuel quality.A pilot-scale separation plant based on carbon hollow fiber membranes for upgrading biogas to vehicle fuel quality was constructed and operated at the biogas plant,Gl?r IKS,Lillehammer Norway.Vehicle fuel quality according to Swedish legislation was successfully achieved in a single stage separation process.The raw biogas from anaerobic digestion of food waste contained 64±3 mol%CH_4,30–35 mol%CO_2 and less than one percent of N_2 and a minor amount of other impurities.The raw biogas was available at 1.03 bar with a maximum flow rate of 60 Nm^3h^(à1).Pre-treatment of biogas was performed to remove bulk H_2O and H_2S contents up to the required limits in the vehicle fuel before entering to membrane system.The membrane separation plant was designed to process 60 Nm^3h^(à1)of raw biogas at pressure up to 21 bar.The initial tests were,however,performed for the feed flow rate of 10 Nm^3h^(à1)at 21 bar.The successful operation of the pilot plant separation was continuously run for 192 h(8days).The CH_4 purity of 96%and maximum CH_4 recovery of 98%was reached in a short-term test of 5 h.The permeate stream contained over20 mol%CH_4which could be used for the heating application.Aspen Hysys~?was integrated with Chem Brane(in-house developed membrane model)to run the simulations for estimation of membrane area and energy requirement of the pilot plant.Cost estimation was performed based on simulation data and later compared with actual field results.展开更多
The aim of this work was to develop an automated on-line solid phase extraction(SPE)with liquid chromatography-tandem mass spectrometry method for the detection of fifteen sulfonamides in pork and fish samples.Samples...The aim of this work was to develop an automated on-line solid phase extraction(SPE)with liquid chromatography-tandem mass spectrometry method for the detection of fifteen sulfonamides in pork and fish samples.Samples were extracted with 0.2%formic acid acetonitrile solution,purified by on-line SPE device with HLB column,then separated by XBridge C18 column,using 0.1%formic acid solution and acetonitrile as the mobile phase.Mass spectrometric data was acquired under multiple reaction monitoring(MRM)mode using positive ionization electrospray.Internal standard method was used in the quantification,good linear relationship was got in range of 0.1–100 ng/mL and correlation coefficient was higher than 0.9990.The limits of detection were in the range of 0.125–2.00g/kg and the limits of quantitation were in the range of 0.250–5.00g/kg.Recoveries of the method were in range of 78.3%–99.3%,relative standard deviation were lower than 10%.The method was simple,sensitivity,and could be used for routine supervision and analysis of fifteen sulfonamides in pork and fish.展开更多
Based on the theory of multi-body system (MBS), bine’s and huston’s methods are applied to an on-line measuring system of machining center in this paper. Through the study on modeling technique, the comprehensive mo...Based on the theory of multi-body system (MBS), bine’s and huston’s methods are applied to an on-line measuring system of machining center in this paper. Through the study on modeling technique, the comprehensive model for errors calculation in an on-line measuring System of machining center have been built for the first time. Using this model, the errors can be compensated by soft.ware and the measuring accuracy can be enhanced without any more inveSt. This model can be used in all kinds of machining center.展开更多
On-line measurement of manufaturing quality of rolled steel needs the performances of noncontact, high-responds, high-resolution and high aceuracy. The reccntly developed hardware makes it possible. This paper gives a...On-line measurement of manufaturing quality of rolled steel needs the performances of noncontact, high-responds, high-resolution and high aceuracy. The reccntly developed hardware makes it possible. This paper gives a review of the development of this techniques and introduces four kinds of developed measurement systems. And the future development trends in this field was also discussed.展开更多
The construction of the first in the world 200 kt/a coal-toEG unit was conducted successfully,and commissioning of this unit was carried out recently with its official operation being slated,which has symbolized China...The construction of the first in the world 200 kt/a coal-toEG unit was conducted successfully,and commissioning of this unit was carried out recently with its official operation being slated,which has symbolized China as the first in the world that utilizes its proprietary technique for commercial manufacture of EG from coal.展开更多
Non-stationary time series could be divided into piecewise stationary stochastic signal. However, the number and locations of breakpoints, as well as the approximation function of the respective segment signal are unk...Non-stationary time series could be divided into piecewise stationary stochastic signal. However, the number and locations of breakpoints, as well as the approximation function of the respective segment signal are unknown. To solve this problem, a novel on-line structural breaks estimation algorithm based on piecewise autoregressive processes is proposed. In order to find the "best" combination of the number, lengths, and orders of the piecewise autoregressive (AR) processes, the Akaikes Information Criterion (AIC) and Yule-Walker equations are applied to estimate an AR model fit to the data. Numerical results demonstrate that the proposed estimation algorithm is suitable for different data series. Furthermore, the algorithm is used in a clinical study of electroencephalogram (EEG) with satisfactory results, and the ability to deal with real-time data is the most outstanding characteristic of on-line structural breaks estimation algorithm proposed.展开更多
A simple process flow method for the fabrication of poly-Si nanowire thin film transistors（NW-TFTs） without advanced lithographic tools is introduced in this paper.The cross section of the nanowire channel was manip...A simple process flow method for the fabrication of poly-Si nanowire thin film transistors（NW-TFTs） without advanced lithographic tools is introduced in this paper.The cross section of the nanowire channel was manipulated to have a parallelogram shape by combining a two-step etching process and a spacer formation technique.The electrical and temperature characteristics of the developed NW-TFTs are measured in detail and compared with those of conventional planar TFTs（used as a control）.The as-demonstrated NW-TFT exhibits a small subthreshold swing（191 mV/dec）,a high ON/OFF ratio（8.5 × 10~7）,alow threshold voltage（1.12 V）,a decreased OFF-state current,and a low drain-induced-barrier lowering value（70.11 mV/V）.The effective trap densities both at the interface and grain boundaries are also significantly reduced in the NW-TFT.The results show that all improvements of the NW-TFT originate from the enhanced gate controllability of the multi-gate over the channel.展开更多
As the most active factor,the translator bears a positive function in translation activity,which is mainly displayed in the whole translation process,that is,before,during and after translation.
Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations int...Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations into shock waves driven by a two-step radiation pulse in polystyrene（CH） capsule targets are experimentally conducted at the Shen Guang Ⅱ laser facility. Differing from the traditional shock-timing implementation in which one shock wave could catch up with another one in solid CH, in this experiment, the second shock front in a rarefaction CH layer is observed through velocity interferometry. This second shock could also be made to converge with rarefaction waves within only a few micrometers of the CH capsule by designing the two-shock coalescence time. A shock-timing diagnostic technique to tune the multi-shock convergence in the CH capsule can thereby be achieved.The experimental results in the CH layer are quasi-quantitatively interpreted using streamlines simulated with the Multi-1 D program. The experimental results are expected to offer important information for target structure and laser pulse design, both of which are important for realizing inertial confinement fusion.展开更多
文摘This paper studies a strongly convergent inertial forward-backward-forward algorithm for the variational inequality problem in Hilbert spaces.In our convergence analysis,we do not assume the on-line rule of the inertial parameters and the iterates,which have been assumed by several authors whenever a strongly convergent algorithm with an inertial extrapolation step is proposed for a variational inequality problem.Consequently,our proof arguments are different from what is obtainable in the relevant literature.Finally,we give numerical tests to confirm the theoretical analysis and show that our proposed algorithm is superior to related ones in the literature.
文摘The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.
文摘A technique of detecting cutting tool fracture and ultimate wear by si- multaneously monitoring both the spindle motor current and cutting process related acoustic emission(AE)in the cutting process is reported.The technique can detect breakage of drills having diameter over 0.8mm,turning cutter crack of area over 0.2mm,and the ultimate wear.The principle,system construction,experimental method and result of the technique are discussed.The ratio of success in detection approaches 96% or higher.
文摘Based on the fact that on-line chat has become the most developing language form in the information age, this article point out the stylistic features of on-line English chat. Though in written language form, such language is spoken language in nature, thus it is worthwhile to analyze this special phaenomenon in lexical and grammatical level.
文摘Traditional coal mine safety prediction methods are off-line and do not have dynamic prediction functions.The Support Vector Machine(SVM) is a new machine learning algorithm that has excellent properties.The least squares support vector machine(LS-SVM) algorithm is an improved algorithm of SVM.But the common LS-SVM algorithm,used directly in safety predictions,has some problems.We have first studied gas prediction problems and the basic theory of LS-SVM.Given these problems,we have investigated the affect of the time factor about safety prediction and present an on-line prediction algorithm,based on LS-SVM.Finally,given our observed data,we used the on-line algorithm to predict gas emissions and used other related algorithm to compare its performance.The simulation results have verified the validity of the new algorithm.
基金Supported by the National Key Research and Development Program of China under Grant No 2017YFA0304400the National Natural Science Foundation of China under Grant Nos 91336213,11703031,U1731132 and 11774108
文摘We demonstrate a simple scheme of 6.835 GHz microwave source based on the sub-sampling phase lock loop(PLL). A dielectric resonant oscillator of 6.8 GHz is directly phase locked to an ultra-low phase noise 100 MHz oven controlled crystal oscillator(OCXO) utilizing the sub-sampling PLL. Then the 6.8 GHz is mixed with 35 MHz from an direct digital synthesizer(DDS) which is also referenced to the 100 MHZ OCXO to generate the final6.835 GHz signal. Benefiting from the sub-sampling PLL, the processes of frequency multiplication, which are usually necessary in the development of a microwave source, are greatly simplified. The architecture of the microwave source is pretty simple. Correspondingly, its power consumption and cost are low. The absolute phase noises of the 6.835 GHz output signal are-47 d Bc/Hz,-77 dBc/Hz,-104 dBc/Hz and-121 dBc/Hz at1 Hz, 10 Hz, 100 Hz and 1 kHz offset frequencies, respectively. The frequency stability limited by the phase noise through the Dick effect is theoretically estimated to be better than 5.0 × 10^-14τ^1/2 when it is used as the local oscillator of the Rb atomic clocks. This low phase noise microwave source can also be used in other experiments of precision measurement physics.
文摘The energy contents of biogas could be significantly enhanced by upgrading it to vehicle fuel quality.A pilot-scale separation plant based on carbon hollow fiber membranes for upgrading biogas to vehicle fuel quality was constructed and operated at the biogas plant,Gl?r IKS,Lillehammer Norway.Vehicle fuel quality according to Swedish legislation was successfully achieved in a single stage separation process.The raw biogas from anaerobic digestion of food waste contained 64±3 mol%CH_4,30–35 mol%CO_2 and less than one percent of N_2 and a minor amount of other impurities.The raw biogas was available at 1.03 bar with a maximum flow rate of 60 Nm^3h^(à1).Pre-treatment of biogas was performed to remove bulk H_2O and H_2S contents up to the required limits in the vehicle fuel before entering to membrane system.The membrane separation plant was designed to process 60 Nm^3h^(à1)of raw biogas at pressure up to 21 bar.The initial tests were,however,performed for the feed flow rate of 10 Nm^3h^(à1)at 21 bar.The successful operation of the pilot plant separation was continuously run for 192 h(8days).The CH_4 purity of 96%and maximum CH_4 recovery of 98%was reached in a short-term test of 5 h.The permeate stream contained over20 mol%CH_4which could be used for the heating application.Aspen Hysys~?was integrated with Chem Brane(in-house developed membrane model)to run the simulations for estimation of membrane area and energy requirement of the pilot plant.Cost estimation was performed based on simulation data and later compared with actual field results.
基金This work was supported by“National Key Research and Development Program of China”(Project No.2018YFC1603400)Science and Technology Program of Hebei Province(Project No.19225503D).
文摘The aim of this work was to develop an automated on-line solid phase extraction(SPE)with liquid chromatography-tandem mass spectrometry method for the detection of fifteen sulfonamides in pork and fish samples.Samples were extracted with 0.2%formic acid acetonitrile solution,purified by on-line SPE device with HLB column,then separated by XBridge C18 column,using 0.1%formic acid solution and acetonitrile as the mobile phase.Mass spectrometric data was acquired under multiple reaction monitoring(MRM)mode using positive ionization electrospray.Internal standard method was used in the quantification,good linear relationship was got in range of 0.1–100 ng/mL and correlation coefficient was higher than 0.9990.The limits of detection were in the range of 0.125–2.00g/kg and the limits of quantitation were in the range of 0.250–5.00g/kg.Recoveries of the method were in range of 78.3%–99.3%,relative standard deviation were lower than 10%.The method was simple,sensitivity,and could be used for routine supervision and analysis of fifteen sulfonamides in pork and fish.
文摘Based on the theory of multi-body system (MBS), bine’s and huston’s methods are applied to an on-line measuring system of machining center in this paper. Through the study on modeling technique, the comprehensive model for errors calculation in an on-line measuring System of machining center have been built for the first time. Using this model, the errors can be compensated by soft.ware and the measuring accuracy can be enhanced without any more inveSt. This model can be used in all kinds of machining center.
文摘On-line measurement of manufaturing quality of rolled steel needs the performances of noncontact, high-responds, high-resolution and high aceuracy. The reccntly developed hardware makes it possible. This paper gives a review of the development of this techniques and introduces four kinds of developed measurement systems. And the future development trends in this field was also discussed.
文摘The construction of the first in the world 200 kt/a coal-toEG unit was conducted successfully,and commissioning of this unit was carried out recently with its official operation being slated,which has symbolized China as the first in the world that utilizes its proprietary technique for commercial manufacture of EG from coal.
基金supported by Fund of National Science & Technology monumental projects under Grants No. 2012ZX03005012, 2011ZX03005-004-03, 2009ZX03003-007
文摘Non-stationary time series could be divided into piecewise stationary stochastic signal. However, the number and locations of breakpoints, as well as the approximation function of the respective segment signal are unknown. To solve this problem, a novel on-line structural breaks estimation algorithm based on piecewise autoregressive processes is proposed. In order to find the "best" combination of the number, lengths, and orders of the piecewise autoregressive (AR) processes, the Akaikes Information Criterion (AIC) and Yule-Walker equations are applied to estimate an AR model fit to the data. Numerical results demonstrate that the proposed estimation algorithm is suitable for different data series. Furthermore, the algorithm is used in a clinical study of electroencephalogram (EEG) with satisfactory results, and the ability to deal with real-time data is the most outstanding characteristic of on-line structural breaks estimation algorithm proposed.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2016YFA0302300 and 2016YFA0200404)the National Natural Science Foundation of China(Grant No.61306105)+2 种基金the National Science and Technology Major Project of China(Grant No.2011ZX02708-002)the Tsinghua University Initiative Scientific Research Program,Chinathe Tsinghua National Laboratory for Information Science and Technology(TNList)Cross-discipline Foundation,China
文摘A simple process flow method for the fabrication of poly-Si nanowire thin film transistors（NW-TFTs） without advanced lithographic tools is introduced in this paper.The cross section of the nanowire channel was manipulated to have a parallelogram shape by combining a two-step etching process and a spacer formation technique.The electrical and temperature characteristics of the developed NW-TFTs are measured in detail and compared with those of conventional planar TFTs（used as a control）.The as-demonstrated NW-TFT exhibits a small subthreshold swing（191 mV/dec）,a high ON/OFF ratio（8.5 × 10~7）,alow threshold voltage（1.12 V）,a decreased OFF-state current,and a low drain-induced-barrier lowering value（70.11 mV/V）.The effective trap densities both at the interface and grain boundaries are also significantly reduced in the NW-TFT.The results show that all improvements of the NW-TFT originate from the enhanced gate controllability of the multi-gate over the channel.
文摘As the most active factor,the translator bears a positive function in translation activity,which is mainly displayed in the whole translation process,that is,before,during and after translation.
基金Supported by the Science and Technology on Plasma Physics Laboratory under Grant No 9140C6801021001
文摘Shock-timing experiments are indispensable to inertial confinement fusion mainly because the timing of multiple shock waves is crucial to understanding the processes of laser irradiation of targets. Investigations into shock waves driven by a two-step radiation pulse in polystyrene（CH） capsule targets are experimentally conducted at the Shen Guang Ⅱ laser facility. Differing from the traditional shock-timing implementation in which one shock wave could catch up with another one in solid CH, in this experiment, the second shock front in a rarefaction CH layer is observed through velocity interferometry. This second shock could also be made to converge with rarefaction waves within only a few micrometers of the CH capsule by designing the two-shock coalescence time. A shock-timing diagnostic technique to tune the multi-shock convergence in the CH capsule can thereby be achieved.The experimental results in the CH layer are quasi-quantitatively interpreted using streamlines simulated with the Multi-1 D program. The experimental results are expected to offer important information for target structure and laser pulse design, both of which are important for realizing inertial confinement fusion.
