The integration of electronic components and the popularity of flexible devices have come up with higher expectations for the heat dissipation capability and comprehensive mechanical performance of thermal management ...The integration of electronic components and the popularity of flexible devices have come up with higher expectations for the heat dissipation capability and comprehensive mechanical performance of thermal management materials.In this work,after the modification of polyimide(PI)fibers through oxidation and amination,the obtained PDA@OPI fibers(polydopamine(PDA)-modified pre-oxidized PI fibers)with abundant amino groups were mixed into graphene oxide(GO)to form uniform GO-PDA@OPI composites.Followed by evaporation,carbonization,graphitization and mechanical compaction,the G-gPDA@OPI films with a stable three-dimensional(3D)long-range interconnected covalent structure were built.In particular,due to the rich covalent bonds between GO layers and PDI@OPI fibers,the enhanced synergistic graphitization promotes an ordered graphitized structure with less interlayer distance between adjacent graphene sheets in composite film.As a result,the optimized G-gPDA@OPI film displays an improved tensile strength of 78.5 MPa,tensile strain of 19.4%and thermal conductivity of 1028 W/(m·K).Simultaneously,it also shows superior flexibility and high resilience.This work provides an easily-controlled and relatively low-cost route for fabricating multifunctional graphene heat dissipation films.展开更多
This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes(CNTs)on the mechanical properties of Cu64Zr36 metallic glass(MG).Three types of functional groups,carboxylic...This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes(CNTs)on the mechanical properties of Cu64Zr36 metallic glass(MG).Three types of functional groups,carboxylic,vinyl and ester were used.The effect of CNT volume fraction(Vf)and the number of functional groups attached to CNT,on the mechanical properties and thermal conductivity of CNT-MG composites was analysed using Biovia Materials Studio.At lower values of Vf(from 0 to 5%),the percentage increase in Young’s modulus was approximately 66%.As the value of Vf was increased further(from 5 to 12%),the rate of increase in Young’s modulus was reduced to 16%.The thermal conductivity was found to increase from 1.52 W/mK at Vf?0%to 5.88 W/mK at Vf?12%,thus giving an increase of approximately 286%.Functionalization of SWCNT reduced the thermal conductivity of the SWCNT-MG composites.展开更多
In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and m...In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and mechanical properties of the joint were studied. The pros and cons of the joint were identified and evaluated by measuring the tensile shear strength, microhardness and microstructure observation. The formation mechanism of various phases at the Mg/steel interface was analyzed. The results indicated that the galvanized layer could promote the metallurgical bonding between magnesium alloy and steel by improving the diffusion ability of molten magnesium alloy at the steel interface and reacting with Mg, so as to enhance the strength of the joint. A continuous dense layered eutectic structure(α-Mg+MgZn) was formed at the interface of the joint, while MgZn_(2)and MgZn phase was formed at the weld edge zone and heat affective zone(HAZ), whereas no reaction layer was generated between the uncoated steel and magnesium alloy. A sound joint could be obtained at 2.5 kW, and the corresponding tensile shear strength reached the maximum value of 42.9 N/mm. The strength was slightly reduced at 2.6 kW due to the existence of microcracks in the eutectic reaction layer.展开更多
The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of...The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.展开更多
基金Projects(51971089, 51872087) supported by the National Natural Science Foundation of ChinaProject(2020JJ5021)supported by the Natural Science Foundation of Hunan Province,ChinaProject(kq1804010) supported by the Major Science and Technology Program of Changsha,China。
文摘The integration of electronic components and the popularity of flexible devices have come up with higher expectations for the heat dissipation capability and comprehensive mechanical performance of thermal management materials.In this work,after the modification of polyimide(PI)fibers through oxidation and amination,the obtained PDA@OPI fibers(polydopamine(PDA)-modified pre-oxidized PI fibers)with abundant amino groups were mixed into graphene oxide(GO)to form uniform GO-PDA@OPI composites.Followed by evaporation,carbonization,graphitization and mechanical compaction,the G-gPDA@OPI films with a stable three-dimensional(3D)long-range interconnected covalent structure were built.In particular,due to the rich covalent bonds between GO layers and PDI@OPI fibers,the enhanced synergistic graphitization promotes an ordered graphitized structure with less interlayer distance between adjacent graphene sheets in composite film.As a result,the optimized G-gPDA@OPI film displays an improved tensile strength of 78.5 MPa,tensile strain of 19.4%and thermal conductivity of 1028 W/(m·K).Simultaneously,it also shows superior flexibility and high resilience.This work provides an easily-controlled and relatively low-cost route for fabricating multifunctional graphene heat dissipation films.
文摘This work uses the molecular dynamics approach to study the effects of functionalization of carbon nanotubes(CNTs)on the mechanical properties of Cu64Zr36 metallic glass(MG).Three types of functional groups,carboxylic,vinyl and ester were used.The effect of CNT volume fraction(Vf)and the number of functional groups attached to CNT,on the mechanical properties and thermal conductivity of CNT-MG composites was analysed using Biovia Materials Studio.At lower values of Vf(from 0 to 5%),the percentage increase in Young’s modulus was approximately 66%.As the value of Vf was increased further(from 5 to 12%),the rate of increase in Young’s modulus was reduced to 16%.The thermal conductivity was found to increase from 1.52 W/mK at Vf?0%to 5.88 W/mK at Vf?12%,thus giving an increase of approximately 286%.Functionalization of SWCNT reduced the thermal conductivity of the SWCNT-MG composites.
基金Projects(51705219, 51905227) supported by the National Natural Science Foundation of ChinaProject(BK20200915) supported by the Natural Science Foundation of Jiangsu Province,ChinaProject(19KJB460013) supported by the General University Science Research Project of Jiangsu Province,China。
文摘In this work, laser heat conduction lap welding(LHCLW) of AZ31B magnesium alloy sheet and DP780galvanized steel sheet was carried out by the defocused laser beam. The effects of laser power on the microstructure and mechanical properties of the joint were studied. The pros and cons of the joint were identified and evaluated by measuring the tensile shear strength, microhardness and microstructure observation. The formation mechanism of various phases at the Mg/steel interface was analyzed. The results indicated that the galvanized layer could promote the metallurgical bonding between magnesium alloy and steel by improving the diffusion ability of molten magnesium alloy at the steel interface and reacting with Mg, so as to enhance the strength of the joint. A continuous dense layered eutectic structure(α-Mg+MgZn) was formed at the interface of the joint, while MgZn_(2)and MgZn phase was formed at the weld edge zone and heat affective zone(HAZ), whereas no reaction layer was generated between the uncoated steel and magnesium alloy. A sound joint could be obtained at 2.5 kW, and the corresponding tensile shear strength reached the maximum value of 42.9 N/mm. The strength was slightly reduced at 2.6 kW due to the existence of microcracks in the eutectic reaction layer.
基金the Fundamental Research Funds for the Central Universities(Grant No.30920041102)National Natural Science Foundation of China(Grant No.11802134).
文摘The arc ignition system based on charring polymers has advantages of simple structure,low ignition power consumption and multiple ignitions,which bringing it broadly application prospect in hybrid propulsion system of micro/nano satellite.However,charring polymers alone need a relatively high input voltage to achieve pyrolysis and ignition,which increases the burden and cost of the power system of micro/nano satellite in practical application.Adding conductive substance into charring polymers can effectively decrease the conducting voltage which can realize low voltage and low power consumption repeated ignition of arc ignition system.In this paper,a charring conductive polymer ignition grain with a cavity geometry in precombustion chamber,which is composed of PLA and multiwall carbon nanotubes(MWCNT)was proposed.The detailed ignition processes were analyzed and two different ignition mechanisms in the cavity of charring conductive polymers were revealed.The ignition characteristics of charring conductive polymers were also investigated at different input voltages,ignition grain structures,ignition locations and injection schemes in a visual ignition combustor.The results demonstrated that the ignition delay and external energy required for ignition were inversely correlated with the voltages applied to ignition grain.Moreover,the incremental depth of cavity shortened the ignition delay and external energy required for ignition while accelerated the propagation of flame.As the depth of cavity increased from 2 to 6 mm(at 50 V),the time of flame propagating out of ignition grain changed from 235.6 to 108 ms,and values of mean ignition delay time and mean external energy required for ignition decreased from 462.8 to 320 ms and 16.2 to 10.75 J,respectively.The rear side of the cavity was the ideal ignition position which had a shorter ignition delay and a faster flame propagation speed in comparison to other ignition positions.Compared to direct injection scheme,swirling injection provided a more favorable flow field environment in the cavity,which was beneficial to ignition and initial flame propagation,but the ignition position needed to be away from the outlet of swirling injector.At last,the repeated ignition characteristic of charring conductive polymers was also investigated.The ignition delay time and external energy required for ignition decreased with repeated ignition times but the variation was decreasing gradually.
