本研究利用70号道路石油沥青和SBS改性沥青,将温拌剂(Sasobit)、氢氧化铝(ATH)和有机蒙脱土(OMMT)与沥青复配,制备成三种不同阻燃剂掺量(质量分数)的温拌阻燃沥青,采用多应力蠕变恢复(MSCR)试验开展对温拌阻燃沥青高温性能的评价。分别...本研究利用70号道路石油沥青和SBS改性沥青,将温拌剂(Sasobit)、氢氧化铝(ATH)和有机蒙脱土(OMMT)与沥青复配,制备成三种不同阻燃剂掺量(质量分数)的温拌阻燃沥青,采用多应力蠕变恢复(MSCR)试验开展对温拌阻燃沥青高温性能的评价。分别对温拌阻燃沥青在60℃下的应变变化、蠕变恢复率(R)、不可恢复蠕变柔量(J_(nr))及其相应应力敏感性指标(R_(diff)、J_(nrdiff))进行分析,并依据AASHTO M 332-20标准对不同阻燃剂掺量的温拌阻燃沥青进行交通分级。结果表明:随着阻燃剂掺量的提高,两种类型沥青的应变值减小,J_(nr)值呈减小趋势,R值呈增大趋势;阻燃剂掺量较低时,提高其掺量对沥青结合料的高温性能改善效果更加明显;温拌阻燃沥青(道路石油沥青)的J_(nr3.2)值不满足AASHTO标准中“≤4.5”的要求。温拌阻燃沥青的J_(nrdiff)值均能满足AASHTO标准中“≤75%”的要求。温拌阻燃沥青(道路石油沥青)未达到标准交通要求而无法分级,温拌阻燃沥青(SBS改性沥青)在4%阻燃剂掺量下达到特重交通的标准,在8%、12%掺量下达到极重交通的标准,因此温拌阻燃沥青(SBS改性沥青)的高温性能更好。基于对温拌阻燃沥青蠕变力学指标、高温交通分级和经济性的综合考虑,推荐复配阻燃剂(ATH、OMMT的质量比为3∶1)的最佳掺量为8%。展开更多
Permanent deformation or rutting, one of the most important distresses in flexible pavements, has long been a problem in asphalt mixtures and thus a great deal of research has been focused on the development of a rheo...Permanent deformation or rutting, one of the most important distresses in flexible pavements, has long been a problem in asphalt mixtures and thus a great deal of research has been focused on the development of a rheological parameter that would address the rutting susceptibility of both unmodified and modified bituminous binders. In this research, three warm mix additives(Sasobit, Rheofalt and Zycotherm) were used to modify 60-70 penetration grade base binder. The rutting potential of both modified and unmodified binders were evaluated through the multiple stress creep recovery(MSCR)-based parameter, nonrecoverable compliance(Jnr) and recovery parameter(R). Several performance tests carried on stone matrix asphalt(SMA) mixtures comprising different nominal maximum aggregate sizes(NMASs, 9.5, 12.5 and 19 mm), like Marshall stability, dynamic and static creep and Hamburg wheel tracking tests to evaluate their rutting performance. The objective of this work is to correlate MSCR test results to performance. Results indicate that for the range of the gradations investigated in this work, increasing the nominal maximum aggregate size of the gradation would increase the permanent deformation resistance of the SMA mixture. Addition of 3% sasobit to base binder leads an increase in Jnr100 about 82%. Addition of 2% rheofalt to base binder leads an recovery increase of about 9.76 % and 27.44% in stress levels of 100 and 3200 Pa, respectively. The results reveal that rutting resistance of mixtures improves as Jnr decreases. The use of the MSCR test in the rutting characterization of bituminous binders is highly recommended based on the results of this work.展开更多
文摘本研究利用70号道路石油沥青和SBS改性沥青,将温拌剂(Sasobit)、氢氧化铝(ATH)和有机蒙脱土(OMMT)与沥青复配,制备成三种不同阻燃剂掺量(质量分数)的温拌阻燃沥青,采用多应力蠕变恢复(MSCR)试验开展对温拌阻燃沥青高温性能的评价。分别对温拌阻燃沥青在60℃下的应变变化、蠕变恢复率(R)、不可恢复蠕变柔量(J_(nr))及其相应应力敏感性指标(R_(diff)、J_(nrdiff))进行分析,并依据AASHTO M 332-20标准对不同阻燃剂掺量的温拌阻燃沥青进行交通分级。结果表明:随着阻燃剂掺量的提高,两种类型沥青的应变值减小,J_(nr)值呈减小趋势,R值呈增大趋势;阻燃剂掺量较低时,提高其掺量对沥青结合料的高温性能改善效果更加明显;温拌阻燃沥青(道路石油沥青)的J_(nr3.2)值不满足AASHTO标准中“≤4.5”的要求。温拌阻燃沥青的J_(nrdiff)值均能满足AASHTO标准中“≤75%”的要求。温拌阻燃沥青(道路石油沥青)未达到标准交通要求而无法分级,温拌阻燃沥青(SBS改性沥青)在4%阻燃剂掺量下达到特重交通的标准,在8%、12%掺量下达到极重交通的标准,因此温拌阻燃沥青(SBS改性沥青)的高温性能更好。基于对温拌阻燃沥青蠕变力学指标、高温交通分级和经济性的综合考虑,推荐复配阻燃剂(ATH、OMMT的质量比为3∶1)的最佳掺量为8%。
文摘Permanent deformation or rutting, one of the most important distresses in flexible pavements, has long been a problem in asphalt mixtures and thus a great deal of research has been focused on the development of a rheological parameter that would address the rutting susceptibility of both unmodified and modified bituminous binders. In this research, three warm mix additives(Sasobit, Rheofalt and Zycotherm) were used to modify 60-70 penetration grade base binder. The rutting potential of both modified and unmodified binders were evaluated through the multiple stress creep recovery(MSCR)-based parameter, nonrecoverable compliance(Jnr) and recovery parameter(R). Several performance tests carried on stone matrix asphalt(SMA) mixtures comprising different nominal maximum aggregate sizes(NMASs, 9.5, 12.5 and 19 mm), like Marshall stability, dynamic and static creep and Hamburg wheel tracking tests to evaluate their rutting performance. The objective of this work is to correlate MSCR test results to performance. Results indicate that for the range of the gradations investigated in this work, increasing the nominal maximum aggregate size of the gradation would increase the permanent deformation resistance of the SMA mixture. Addition of 3% sasobit to base binder leads an increase in Jnr100 about 82%. Addition of 2% rheofalt to base binder leads an recovery increase of about 9.76 % and 27.44% in stress levels of 100 and 3200 Pa, respectively. The results reveal that rutting resistance of mixtures improves as Jnr decreases. The use of the MSCR test in the rutting characterization of bituminous binders is highly recommended based on the results of this work.
