The possible configurations of pyrrole absorbed on a Si(100)surface have been investigated by x-ray photoelectron spectroscopy(XPS)and near-edge x-ray absorption fine structure(NEXAFS)spectra.The C-1s XPS and NEXAFS s...The possible configurations of pyrrole absorbed on a Si(100)surface have been investigated by x-ray photoelectron spectroscopy(XPS)and near-edge x-ray absorption fine structure(NEXAFS)spectra.The C-1s XPS and NEXAFS spectra of these adsorption configurations have been calculated by using the density functional theory(DFT)method and fullcore hole(FCH)approximation to investigate the relationship between the adsorption configurations and the spectra.The result shows that the XPS and NEXAFS spectra are structurally dependent on the configurations of pyrrole absorbed on the Si(100)surface.Compared with the XPS,the NEXAFS spectra are relatively sensitive to the adsorption configurations and can accurately identify them.The NEXAFS decomposition spectra produced by non-equivalent carbon atoms have also been calculated and show that the spectral features vary with the diverse types of carbon atoms and their structural environments.展开更多
With home-made multi-walled carbon nanotubes （MWCNTs, simplified as CNTs in later text） as support, CNT-supported Co-Mo-S catalysts, denoted as x%（mass percentage）MoiCoj/CNTs, were prepared. Their catalytic perfor...With home-made multi-walled carbon nanotubes （MWCNTs, simplified as CNTs in later text） as support, CNT-supported Co-Mo-S catalysts, denoted as x%（mass percentage）MoiCoj/CNTs, were prepared. Their catalytic performance for thiophene hydrodesulfurization （HDS） and pyrrole hydrodenitrification （HDN） reactions was studied, and compared with the reference system sup- ported by AC. Over the 7.24%Mo3Co1/CNTs catalyst at reaction condition of 1.5 MPa, 613 K, C4H4S/H2=3.7/96.3（molar ratio） and GHSV≈8000 mlswP/（g-cat.h）, the specific HDS activity of thiophene reached 3.29 mmolc4H4S/（s.molMo）, which was 1.32 times as high as that （2.49 mmolc4H4S/（s.molMo）） of the AC-based counterpart, and was 2.47 times as high as that （1.33 mmolc4H4S/（s-molMo）） of the catalysts supported by AC with the respective optimal MoaCol-loading amount, 16.90%Mo3Co1/AC. Analogous reaction-chemical behaviours were also observed in the case of pyrrole HDN. It was experimentally found that using the CNTs in place of AC as support of the catalyst caused little change in the apparent activation energy for the thiophene HDS or pyrrole HDN reaction, but led to a significant increase in the concentration of catalytically active Mo-species （Mo^4＋） at the surface of the functioning catalyst. On the other hand, H2-TPD measurements revealed that the CNT-supported catalyst could reversibly adsorb a greater amount of hydrogen under atmospheric pressure at temperatures ranging from room temperature to about 673 K. This unique feature would help to generate microenvironments with higher stationarystate concentration of active hydrogen-adspecies at the surface of the functioning catalyst. Both factors mentioned above were favorable to increasing the rate of thiophene HDS and pyrrole HDN reactions.展开更多
The electrochemical performance of lithium-sulfur(Li-S)batteries is strongly hampered by the shuttle effect and slow redox kinetics of lithium polysulfides(Li PSs).Surface modified interlayer of a separator of Li-S ba...The electrochemical performance of lithium-sulfur(Li-S)batteries is strongly hampered by the shuttle effect and slow redox kinetics of lithium polysulfides(Li PSs).Surface modified interlayer of a separator of Li-S batteries is demonstrated to be an effective strategy to overcome this problem.Herein,cobalt nanoparticles confined in nitrogen co-doped porous carbon framework(Co-CN)were developed from pyrolysis of ZIF-67 and used as interlayer of PP separator for Li-S batteries,and were functionalized by four pyrrole derivatives,1-phenylpyrrole,1-methyl pyrrole,1-(p-toluenesulfonyl)pyrrole,and 1-pyrrole,respectively,which were screened in terms of the electron-withdrawing/donating ability of the substituent groups on the pyrrolic nitrogen.The impact of the molecular structure of pyrrole derivatives on the interaction with Li PSs and the electrochemical performance of Li-S batteries were explored by nuclear magnetic resonance and theoretical calculation.It is uncovered that 1-phenylpyrrole shows the highest enhancement of redox kinetics of Li PSs,attributing to the optimal interaction with Co nanoparticles and Li PSs.Therefore,1-phenylpyrrole modified Co-CN interlayer enables the best electrochemical performance for the Li-S batteries,delivering a specific capacity of 562 m Ah g^(-1)at 5 C and a capacity of 538,526,and 449 m Ah g^(-1)after 500 cycles at 1,2,and 3 C,respectively.At a high sulfur loading of 5.5 mg cm^(-2),it achieves a capacity of 440 m Ah g^(-1)after 500 cycles at 1 C.This work reveals the interaction mechanism among Li PSs,Co nanoparticles and the molecular modifiers in improving the electrochemical performance of Li-S batteries.展开更多
Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via r...Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via reductive amination/cyclization of levulinic acid(LA)with primary aromatic amines and hydrosilanes(e.g.,PMHS)over Cs F,and a series of N-substituted aryl pyrroles could be obtained in good to excellent yields at 120○C.The mechanism investigation indicates that the reaction proceeds in two steps:the cyclization between amine and LA occurs first to form intermediate 5-methyl-N-alkyl-1,3-dihydro-2H-pyrrolones and their isomeride(B),and then the chemo-and region-selective reduction of intermediates take place to produce the final products.This approach for synthesis of N-substituted aryl pyrroles can be performed under mild and green conditions,which may have promising applications.展开更多
基金Project supported by the Shandong Provincial Natural Science Foundation,China(Grant Nos.ZR2022MA025 and ZR2020MA077).
文摘The possible configurations of pyrrole absorbed on a Si(100)surface have been investigated by x-ray photoelectron spectroscopy(XPS)and near-edge x-ray absorption fine structure(NEXAFS)spectra.The C-1s XPS and NEXAFS spectra of these adsorption configurations have been calculated by using the density functional theory(DFT)method and fullcore hole(FCH)approximation to investigate the relationship between the adsorption configurations and the spectra.The result shows that the XPS and NEXAFS spectra are structurally dependent on the configurations of pyrrole absorbed on the Si(100)surface.Compared with the XPS,the NEXAFS spectra are relatively sensitive to the adsorption configurations and can accurately identify them.The NEXAFS decomposition spectra produced by non-equivalent carbon atoms have also been calculated and show that the spectral features vary with the diverse types of carbon atoms and their structural environments.
基金Supported by National Natural Science Foundation of China (No. 20473063 and No. 20590364).
文摘With home-made multi-walled carbon nanotubes （MWCNTs, simplified as CNTs in later text） as support, CNT-supported Co-Mo-S catalysts, denoted as x%（mass percentage）MoiCoj/CNTs, were prepared. Their catalytic performance for thiophene hydrodesulfurization （HDS） and pyrrole hydrodenitrification （HDN） reactions was studied, and compared with the reference system sup- ported by AC. Over the 7.24%Mo3Co1/CNTs catalyst at reaction condition of 1.5 MPa, 613 K, C4H4S/H2=3.7/96.3（molar ratio） and GHSV≈8000 mlswP/（g-cat.h）, the specific HDS activity of thiophene reached 3.29 mmolc4H4S/（s.molMo）, which was 1.32 times as high as that （2.49 mmolc4H4S/（s.molMo）） of the AC-based counterpart, and was 2.47 times as high as that （1.33 mmolc4H4S/（s-molMo）） of the catalysts supported by AC with the respective optimal MoaCol-loading amount, 16.90%Mo3Co1/AC. Analogous reaction-chemical behaviours were also observed in the case of pyrrole HDN. It was experimentally found that using the CNTs in place of AC as support of the catalyst caused little change in the apparent activation energy for the thiophene HDS or pyrrole HDN reaction, but led to a significant increase in the concentration of catalytically active Mo-species （Mo^4＋） at the surface of the functioning catalyst. On the other hand, H2-TPD measurements revealed that the CNT-supported catalyst could reversibly adsorb a greater amount of hydrogen under atmospheric pressure at temperatures ranging from room temperature to about 673 K. This unique feature would help to generate microenvironments with higher stationarystate concentration of active hydrogen-adspecies at the surface of the functioning catalyst. Both factors mentioned above were favorable to increasing the rate of thiophene HDS and pyrrole HDN reactions.
基金supported by the National Key Research and Development Program of China(Grant No.2017YFA0206703)the National Natural Science Foundation of China(Grant No.U2032151)。
文摘The electrochemical performance of lithium-sulfur(Li-S)batteries is strongly hampered by the shuttle effect and slow redox kinetics of lithium polysulfides(Li PSs).Surface modified interlayer of a separator of Li-S batteries is demonstrated to be an effective strategy to overcome this problem.Herein,cobalt nanoparticles confined in nitrogen co-doped porous carbon framework(Co-CN)were developed from pyrolysis of ZIF-67 and used as interlayer of PP separator for Li-S batteries,and were functionalized by four pyrrole derivatives,1-phenylpyrrole,1-methyl pyrrole,1-(p-toluenesulfonyl)pyrrole,and 1-pyrrole,respectively,which were screened in terms of the electron-withdrawing/donating ability of the substituent groups on the pyrrolic nitrogen.The impact of the molecular structure of pyrrole derivatives on the interaction with Li PSs and the electrochemical performance of Li-S batteries were explored by nuclear magnetic resonance and theoretical calculation.It is uncovered that 1-phenylpyrrole shows the highest enhancement of redox kinetics of Li PSs,attributing to the optimal interaction with Co nanoparticles and Li PSs.Therefore,1-phenylpyrrole modified Co-CN interlayer enables the best electrochemical performance for the Li-S batteries,delivering a specific capacity of 562 m Ah g^(-1)at 5 C and a capacity of 538,526,and 449 m Ah g^(-1)after 500 cycles at 1,2,and 3 C,respectively.At a high sulfur loading of 5.5 mg cm^(-2),it achieves a capacity of 440 m Ah g^(-1)after 500 cycles at 1 C.This work reveals the interaction mechanism among Li PSs,Co nanoparticles and the molecular modifiers in improving the electrochemical performance of Li-S batteries.
基金supported by Chinese Academy of Sciences,China(Grant No.QYZDY-SSW-SLH013-2)Henan Normal University,China。
文摘Synthesizing nitrogen(N)-containing molecules from biomass derivatives is a new strategy for production of this kind of chemicals.Herein,for the first time we present the synthesis of N-substituted aryl pyrroles via reductive amination/cyclization of levulinic acid(LA)with primary aromatic amines and hydrosilanes(e.g.,PMHS)over Cs F,and a series of N-substituted aryl pyrroles could be obtained in good to excellent yields at 120○C.The mechanism investigation indicates that the reaction proceeds in two steps:the cyclization between amine and LA occurs first to form intermediate 5-methyl-N-alkyl-1,3-dihydro-2H-pyrrolones and their isomeride(B),and then the chemo-and region-selective reduction of intermediates take place to produce the final products.This approach for synthesis of N-substituted aryl pyrroles can be performed under mild and green conditions,which may have promising applications.
