期刊文献+
共找到127篇文章
< 1 2 7 >
每页显示 20 50 100
Solving material distribution routing problem in mixed manufacturing systems with a hybrid multi-objective evolutionary algorithm 被引量:7
1
作者 高贵兵 张国军 +2 位作者 黄刚 朱海平 顾佩华 《Journal of Central South University》 SCIE EI CAS 2012年第2期433-442,共10页
The material distribution routing problem in the manufacturing system is a complex combinatorial optimization problem and its main task is to deliver materials to the working stations with low cost and high efficiency... The material distribution routing problem in the manufacturing system is a complex combinatorial optimization problem and its main task is to deliver materials to the working stations with low cost and high efficiency. A multi-objective model was presented for the material distribution routing problem in mixed manufacturing systems, and it was solved by a hybrid multi-objective evolutionary algorithm (HMOEA). The characteristics of the HMOEA are as follows: 1) A route pool is employed to preserve the best routes for the population initiation; 2) A specialized best?worst route crossover (BWRC) mode is designed to perform the crossover operators for selecting the best route from Chromosomes 1 to exchange with the worst one in Chromosomes 2, so that the better genes are inherited to the offspring; 3) A route swap mode is used to perform the mutation for improving the convergence speed and preserving the better gene; 4) Local heuristics search methods are applied in this algorithm. Computational study of a practical case shows that the proposed algorithm can decrease the total travel distance by 51.66%, enhance the average vehicle load rate by 37.85%, cut down 15 routes and reduce a deliver vehicle. The convergence speed of HMOEA is faster than that of famous NSGA-II. 展开更多
关键词 material distribution routing problem multi-objective optimization evolutionary algorithm local search
在线阅读 下载PDF
Optimal setting and placement of FACTS devices using strength Pareto multi-objective evolutionary algorithm 被引量:2
2
作者 Amin Safari Hossein Shayeghi Mojtaba Bagheri 《Journal of Central South University》 SCIE EI CAS CSCD 2017年第4期829-839,共11页
This work proposes a novel approach for multi-type optimal placement of flexible AC transmission system(FACTS) devices so as to optimize multi-objective voltage stability problem. The current study discusses a way for... This work proposes a novel approach for multi-type optimal placement of flexible AC transmission system(FACTS) devices so as to optimize multi-objective voltage stability problem. The current study discusses a way for locating and setting of thyristor controlled series capacitor(TCSC) and static var compensator(SVC) using the multi-objective optimization approach named strength pareto multi-objective evolutionary algorithm(SPMOEA). Maximization of the static voltage stability margin(SVSM) and minimizations of real power losses(RPL) and load voltage deviation(LVD) are taken as the goals or three objective functions, when optimally locating multi-type FACTS devices. The performance and effectiveness of the proposed approach has been validated by the simulation results of the IEEE 30-bus and IEEE 118-bus test systems. The proposed approach is compared with non-dominated sorting particle swarm optimization(NSPSO) algorithm. This comparison confirms the usefulness of the multi-objective proposed technique that makes it promising for determination of combinatorial problems of FACTS devices location and setting in large scale power systems. 展开更多
关键词 STRENGTH PARETO multi-objective evolutionary algorithm STATIC var COMPENSATOR (SVC) THYRISTOR controlled series capacitor (TCSC) STATIC voltage stability margin optimal location
在线阅读 下载PDF
Chemical process dynamic optimization based on hybrid differential evolution algorithm integrated with Alopex 被引量:5
3
作者 范勤勤 吕照民 +1 位作者 颜学峰 郭美锦 《Journal of Central South University》 SCIE EI CAS 2013年第4期950-959,共10页
To solve dynamic optimization problem of chemical process (CPDOP), a hybrid differential evolution algorithm, which is integrated with Alopex and named as Alopex-DE, was proposed. In Alopex-DE, each original individua... To solve dynamic optimization problem of chemical process (CPDOP), a hybrid differential evolution algorithm, which is integrated with Alopex and named as Alopex-DE, was proposed. In Alopex-DE, each original individual has its own symbiotic individual, which consists of control parameters. Differential evolution operator is applied for the original individuals to search the global optimization solution. Alopex algorithm is used to co-evolve the symbiotic individuals during the original individual evolution and enhance the fitness of the original individuals. Thus, control parameters are self-adaptively adjusted by Alopex to obtain the real-time optimum values for the original population. To illustrate the whole performance of Alopex-DE, several varietal DEs were applied to optimize 13 benchmark functions. The results show that the whole performance of Alopex-DE is the best. Further, Alopex-DE was applied to solve 4 typical CPDOPs, and the effect of the discrete time degree on the optimization solution was analyzed. The satisfactory result is obtained. 展开更多
关键词 evolutionary computation dynamic optimization differential evolution algorithm Alopex algorithm self-adaptivity
在线阅读 下载PDF
An improved multi-objective optimization algorithm for solving flexible job shop scheduling problem with variable batches 被引量:3
4
作者 WU Xiuli PENG Junjian +2 位作者 XIE Zirun ZHAO Ning WU Shaomin 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2021年第2期272-285,共14页
In order to solve the flexible job shop scheduling problem with variable batches,we propose an improved multiobjective optimization algorithm,which combines the idea of inverse scheduling.First,a flexible job shop pro... In order to solve the flexible job shop scheduling problem with variable batches,we propose an improved multiobjective optimization algorithm,which combines the idea of inverse scheduling.First,a flexible job shop problem with the variable batches scheduling model is formulated.Second,we propose a batch optimization algorithm with inverse scheduling in which the batch size is adjusted by the dynamic feedback batch adjusting method.Moreover,in order to increase the diversity of the population,two methods are developed.One is the threshold to control the neighborhood updating,and the other is the dynamic clustering algorithm to update the population.Finally,a group of experiments are carried out.The results show that the improved multi-objective optimization algorithm can ensure the diversity of Pareto solutions effectively,and has effective performance in solving the flexible job shop scheduling problem with variable batches. 展开更多
关键词 flexible job shop variable batch inverse scheduling multi-objective evolutionary algorithm based on decomposition a batch optimization algorithm with inverse scheduling
在线阅读 下载PDF
Multi-objective optimization of operation loop recommendation for kill web 被引量:6
5
作者 YANG Kewei XIA Boyuan +2 位作者 CHEN Gang YANG Zhiwei LI Minghao 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2022年第4期969-985,共17页
In order to improve our military ’s level of intelligent accusation decision-making in future intelligent joint warfare, this paper studies operation loop recommendation methods for kill web based on the fundamental ... In order to improve our military ’s level of intelligent accusation decision-making in future intelligent joint warfare, this paper studies operation loop recommendation methods for kill web based on the fundamental combat form of the future, i.e.,“web-based kill,” and the operation loop theory. Firstly, we pioneer the operation loop recommendation problem with operation ring quality as the objective and closed-loop time as the constraint, and construct the corresponding planning model.Secondly, considering the case where there are multiple decision objectives for the combat ring recommendation problem,we propose for the first time a multi-objective optimization algorithm, the multi-objective ant colony evolutionary algorithm based on decomposition(MOACEA/D), which integrates the multi-objective evolutionary algorithm based on decomposition(MOEA/D) with the ant colony algorithm. The MOACEA/D can converge the optimal solutions of multiple single objectives nondominated solution set for the multi-objective problem. Finally,compared with other classical multi-objective optimization algorithms, the MOACEA/D is superior to other algorithms superior in terms of the hyper volume(HV), which verifies the effectiveness of the method and greatly improves the quality and efficiency of commanders’ decision-making. 展开更多
关键词 multi-objective operation loop recommendation kill web ant colony evolutionary algorithm hyper volume(HV)
在线阅读 下载PDF
Differential evolution with controlled search direction 被引量:3
6
作者 贾丽媛 何建新 +1 位作者 张弛 龚文引 《Journal of Central South University》 SCIE EI CAS 2012年第12期3516-3523,共8页
A novel and simple technique to control the search direction of the differential mutation was proposed.In order to verify the performance of this method,ten widely used benchmark functions were chosen and the results ... A novel and simple technique to control the search direction of the differential mutation was proposed.In order to verify the performance of this method,ten widely used benchmark functions were chosen and the results were compared with the original differential evolution(DE)algorithm.Experimental results indicate that the search direction controlled DE algorithm obtains better results than the original DE algorithm in term of the solution quality and convergence rate. 展开更多
关键词 differential evolution evolutionary algorithm search direction numerical optimization
在线阅读 下载PDF
Multi-objective optimization for draft scheduling of hot strip mill 被引量:2
7
作者 李维刚 刘相华 郭朝晖 《Journal of Central South University》 SCIE EI CAS 2012年第11期3069-3078,共10页
A multi-objective optimization model for draft scheduling of hot strip mill was presented, rolling power minimizing, rolling force ratio distribution and good strip shape as the objective functions. A multi-objective ... A multi-objective optimization model for draft scheduling of hot strip mill was presented, rolling power minimizing, rolling force ratio distribution and good strip shape as the objective functions. A multi-objective differential evolution algorithm based on decomposition (MODE/D). The two-objective and three-objective optimization experiments were performed respectively to demonstrate the optimal solutions of trade-off. The simulation results show that MODE/D can obtain a good Pareto-optimal front, which suggests a series of alternative solutions to draft scheduling. The extreme Pareto solutions are found feasible and the centres of the Pareto fronts give a good compromise. The conflict exists between each two ones of three objectives. The final optimal solution is selected from the Pareto-optimal front by the importance of objectives, and it can achieve a better performance in all objective dimensions than the empirical solutions. Finally, the practical application cases confirm the feasibility of the multi-objective approach, and the optimal solutions can gain a better rolling stability than the empirical solutions, and strip flatness decreases from (0± 63) IU to (0±45) IU in industrial production. 展开更多
关键词 hot strip mill draft scheduling multi-objective optimization multi-objective differential evolution algorithm based ondecomposition (MODE/D) Pareto-optimal front
在线阅读 下载PDF
面向多目标探测的高轨遥感卫星观测任务规划方法
8
作者 凌龙 朱燕麒 +3 位作者 鲁之君 王洁 吴同舟 冯倩 《中国空间科学技术(中英文)》 北大核心 2025年第4期102-113,共12页
高轨遥感卫星具有广阔的视场覆盖范围、高效的观测时效性以及强大的连续成像能力,能够有效获取重点区域和目标的关键特征信息,已经成为现代遥感技术中不可或缺的重要工具。高轨遥感卫星在区域凝视任务中,经常面临多目标同时监视和跟踪... 高轨遥感卫星具有广阔的视场覆盖范围、高效的观测时效性以及强大的连续成像能力,能够有效获取重点区域和目标的关键特征信息,已经成为现代遥感技术中不可或缺的重要工具。高轨遥感卫星在区域凝视任务中,经常面临多目标同时监视和跟踪的应用需求。为了解决多目标观测需求下任务执行效率较低的难题,提出了一种基于智能优化算法的高轨遥感卫星成像任务规划方法,创新性地设计了一种“评价矩阵”作为差分进化算法的目标函数,实现了多目标观测区域规划,并在此基础上使用遗传算法完成观测路径规划。仿真结果表明:与传统方法相比,观测效率平均提升28.84%,能源使用率平均降低24.37%。可以通过较少的观测次数覆盖全部待跟踪目标,有效减少卫星指向机动次数与机动角度,而且算法并行性与可移植性较好,可适应星上自主任务规划与星座协同观测等多种应用场景。 展开更多
关键词 高轨遥感卫星 多目标观测 观测任务规划 差分进化算法 遗传算法
在线阅读 下载PDF
基于差分进化算法的微秒级超高速椭偏测量研究
9
作者 王赛飞 张瑞 +2 位作者 薛鹏 徐承雨 王志斌 《应用光学》 北大核心 2025年第4期859-867,共9页
针对传统机械旋转补偿器型椭偏测量时间分辨率低、稳定性较差等问题,提出一种基于差分进化算法的穆勒矩阵求解系统模型,在此基础上结合超高速弹光调制实现了全穆勒矩阵微秒级测量。首先,通过对双驱动弹光调制器(photoelasticmodulator,P... 针对传统机械旋转补偿器型椭偏测量时间分辨率低、稳定性较差等问题,提出一种基于差分进化算法的穆勒矩阵求解系统模型,在此基础上结合超高速弹光调制实现了全穆勒矩阵微秒级测量。首先,通过对双驱动弹光调制器(photoelasticmodulator,PEM)的工作模式展开研究,证明了在纯行波模式下,能够实现快轴方向的快速且周期性的旋转;然后,设计并加工了驱动频率分别为60kHz和100kHz的PEMs,构建了基于双驱动PEM的超高速椭偏测量模型,通过差分进化算法进行光强拟合,建立了穆勒矩阵求解系统模型,求解得到其光学周期在微秒级,对样品穆勒矩阵所有元素拟合的均方误差均小于0.001。 展开更多
关键词 弹光调制器 超高速快轴旋转 差分进化算法 穆勒矩阵
在线阅读 下载PDF
基于动态RBF代理模型和进化算法的起重机主梁优化
10
作者 段雄 范小宁 《机械设计》 北大核心 2025年第3期86-94,共9页
针对基于有限元仿真模型的起重机结构优化计算成本在工程上难以接受的问题,文中结合差分进化算法和径向基代理模型提出一种基于动态径向基代理模型的全局优化策略。该策略在优化过程中通过局部开发最优解和全局探索误差最大区域的加点... 针对基于有限元仿真模型的起重机结构优化计算成本在工程上难以接受的问题,文中结合差分进化算法和径向基代理模型提出一种基于动态径向基代理模型的全局优化策略。该策略在优化过程中通过局部开发最优解和全局探索误差最大区域的加点策略构造动态径向基代理模型,并以约束函数模型的预测误差和目标函数下降程度构建优化终止条件,保证优化的全局收敛性和最优解处的模型精确性。通过数值算例和工字梁优化算例进行验证,该方法不仅能够获得全局最优解,而且明显减少了对原函数的调用次数,显著提高了优化效率。最后,结合桥式起重机桥架的有限元分析,将此方法用于解决起重机主梁优化问题。结果显示:在满足约束的条件下,主梁横截面面积减小了约22.36%,并且降低了大量的计算成本,提高了优化效率,解决了智能群算法与起重机结构有限元模型直接结合进行优化的昂贵计算成本问题。 展开更多
关键词 起重机主梁 动态径向基代理模型 差分进化算法 加点策略
在线阅读 下载PDF
温室对靶喷施机器人绳驱并联机构的运动学分析与仿真
11
作者 王怡旎 赵栋杰 +2 位作者 石有圣 柳长进 李洪凯 《农机化研究》 北大核心 2025年第11期258-265,共8页
为满足中小型塑料温室大棚作物自动对靶施肥施药的作业需求,设计了一种3自由度绳驱并联对靶喷施机器人。首先,描述了其机构特征,建立运动学模型;其次,根据闭环矢量法构建绳索长度的运动学方程,使其能够精准描述绳索在不同位置下的长度变... 为满足中小型塑料温室大棚作物自动对靶施肥施药的作业需求,设计了一种3自由度绳驱并联对靶喷施机器人。首先,描述了其机构特征,建立运动学模型;其次,根据闭环矢量法构建绳索长度的运动学方程,使其能够精准描述绳索在不同位置下的长度变化,基于差分进化算法对正运动学进行数值求解,对其进行位置正、逆解分析,确保机器人在不同作业条件下的精准定位,并通过5组随机生成的具体算例对正、逆解分析结果进行了初步验证;最后,构建了机构的数值仿真模型,分别对温室对靶喷施作业中3种作业情况进行模拟,结果表明,位置理论分析结果可信,3自由度绳驱并联机构各绳索可协调运动且运动轨迹稳定。研究不仅为深入研究机器人动力学、工作空间和运动控制等问题提供了理论依据,也为机器人的实际应用奠定了基础。 展开更多
关键词 机器人 对靶喷施 并联机构 3自由度 绳驱动 差分进化算法 建模 仿真分析
在线阅读 下载PDF
基于MLR-DE-LSTM的大坝变形串联组合预测模型
12
作者 刘天翼 艾星星 张九丹 《中国农村水利水电》 北大核心 2025年第2期207-212,共6页
为了解决单一模型在大坝变形预测中可能带来的信息损失问题,将差分进化算法(DE)用于长短期记忆神经网络(LSTM)模型的参数优化,并结合多元线性回归(MLR)模型建立MLR-DE-LSTM串联组合模型。基于某重力坝的水平位移原型监测数据,对该模型... 为了解决单一模型在大坝变形预测中可能带来的信息损失问题,将差分进化算法(DE)用于长短期记忆神经网络(LSTM)模型的参数优化,并结合多元线性回归(MLR)模型建立MLR-DE-LSTM串联组合模型。基于某重力坝的水平位移原型监测数据,对该模型进行了验证。结果表明,DE算法可以有效提高LSTM模型的预测精度,LSTM模型可以有效挖掘MLR模型尚未完全解释的信息。相较于单一模型,组合模型在预测位移数据时具有更高的准确度和稳定性,组合模型在充分利用数据信息方面具有更大优势。研究结果为提高大坝变形预测精度提供了参考价值。 展开更多
关键词 大坝变形 差分进化算法 长短期记忆神经网络 多元线性回归 组合模型
在线阅读 下载PDF
平面并联机器人离线PID控制优化研究
13
作者 刘一扬 王春燕 《机械设计与制造》 北大核心 2024年第5期156-160,共5页
为了使平面并联机器人在闭环控制系统中具有更稳定的控制性能。对此,这里构建了平面五杆并联机器人动力学模型及其控制系统模型,给出了控制系统的增益矢量p。对机器人系统模型进行离线PID控制优化,通过控制增益来设计控制系统中的增益矢... 为了使平面并联机器人在闭环控制系统中具有更稳定的控制性能。对此,这里构建了平面五杆并联机器人动力学模型及其控制系统模型,给出了控制系统的增益矢量p。对机器人系统模型进行离线PID控制优化,通过控制增益来设计控制系统中的增益矢量p,从而实现非线性单目标动态优化(NLMODOP)。在NLMODOP中加入动态约束,采用带约束处理机制的差分进化(DE)算法求解平面并联机器人的非线性规划问题,进而处理不稳定的动态优化。对机器人模型中的五个连杆进行仿真实验,并对有无DE算法控制的仿真结果进行了比较。结果表明:相比于无DE算法,采用DE算法下的机器人系统模型的连杆跟踪位移基本无跟踪误差。说明基于差分进化算法的平面并联机器人离线PID控制优化具有较好的控制精度和跟踪性能。 展开更多
关键词 平面五杆并联机器人 离线PID控制优化 非线性单目标动态优化 差分进化算法
在线阅读 下载PDF
基于差分进化粒子群混合算法的多无人机协同区域搜索策略 被引量:7
14
作者 赖幸君 唐鑫 +2 位作者 林磊 王志胜 丛玉华 《弹箭与制导学报》 北大核心 2024年第1期89-97,共9页
为提高无人机群在未知环境中的区域搜索效率,提出一种多无人机协同区域搜索策略。首先,根据区域搜索任务需求,建立包含区域覆盖率、区域不确定度、目标存在概率三种属性的区域信息地图;其次,以最大化搜索效率、同时最小化无人机搜索过... 为提高无人机群在未知环境中的区域搜索效率,提出一种多无人机协同区域搜索策略。首先,根据区域搜索任务需求,建立包含区域覆盖率、区域不确定度、目标存在概率三种属性的区域信息地图;其次,以最大化搜索效率、同时最小化无人机搜索过程中的能耗为目标,建立无人机区域搜索滚动时域优化目标函数,指导无人机在线决策搜索路线;然后针对传统群智能优化算法易陷入局部最优的缺陷,设计差分进化粒子群混合算法在线求解该多目标优化问题,提高算法的寻优性能,从而提高无人机的搜索效率。最后,通过数值仿真实验,对所提算法进行验证,仿真结果表明,文中设计的基于差分进化粒子群混合算法的多无人机协同区域搜索策略与传统的群智能优化算法相比具有更高的区域搜索效率。 展开更多
关键词 多无人机 协同搜索 群智能算法 滚动时域优化 差分进化粒子群混合算法
在线阅读 下载PDF
基于SPADE算法的梯级水库群联合防洪优化调度 被引量:4
15
作者 何中政 辛秀钰 +3 位作者 魏博文 尹恒 徐富刚 邓欢 《南水北调与水利科技(中英文)》 CAS CSCD 北大核心 2024年第4期651-660,共10页
针对梯级水库群联合防洪优化调度问题,提出一种基于自适应成功历史策略的改进差分进化算法(strategy and parameter adaptive differential evolution,SPADE)。该算法通过自适应成功历史差分策略来提升随机搜索效率,通过精英种群保守策... 针对梯级水库群联合防洪优化调度问题,提出一种基于自适应成功历史策略的改进差分进化算法(strategy and parameter adaptive differential evolution,SPADE)。该算法通过自适应成功历史差分策略来提升随机搜索效率,通过精英种群保守策略提升局部收敛速度及全局探索能力。据此开展包含10个测试函数的数值实验和赣江中游梯级水库群联合防洪优化调度实例,用于检验所提出的算法应用效果。结果表明:在数值实验中,SPADE算法收敛结果的最优值、平均值、标准差和成功次数评价指标整体优于SHADE、自适应差分进化算法(self-adaptive differential evolution,SADE)、遗传算法(genetic algorithm,GA)、粒子群算法(particle swarm optimization,PSO)、人工蜂群算法(artificial bee colony,ABC);在梯级水库群联合防洪优化调度实例应用中,通过对1964单峰和1973多峰型历史洪水过程进行分析,发现SPADE算法结果在削峰率指标上明显优于SADE、GA、PSO算法,且相比SHADE在两次历史洪水条件下的削峰率指标结果分别提升0.9%、3.4%。实验结果充分验证所提SPADE算法的优越性,可作为梯级水库群联合优化调度问题的有效求解工具。 展开更多
关键词 防洪调度 梯级水库群 差分进化算法 成功历史 差分策略 精英种群
在线阅读 下载PDF
农业管理中多台无人拖拉机路径优化智能算法研究 被引量:3
16
作者 侯晓晓 王蒙 《农机化研究》 北大核心 2024年第12期240-244,249,共6页
为了提高农业生产效率,以提高多台无人驾驶拖拉机的协同作业为研究目标,构建了农业生产多台无人驾驶拖拉机的路径优化模型。同时,根据拖拉机驾驶参数优化总转弯时间和总作业时间的目标函数,提出了适用于多台拖拉机路径优化的自适应精英... 为了提高农业生产效率,以提高多台无人驾驶拖拉机的协同作业为研究目标,构建了农业生产多台无人驾驶拖拉机的路径优化模型。同时,根据拖拉机驾驶参数优化总转弯时间和总作业时间的目标函数,提出了适用于多台拖拉机路径优化的自适应精英差分进化(AEDE)算法,并通过改进微分进化算法进行求解,采用精英选择策略选择最优运行方案。以果园为研究对象开展田间验证试验,结果表明:与传统的差分进化算法(Differential Evolution, DE)相比,基于AEDE优化后的多拖拉机路径优化方案下拖拉机总转弯时间和总作业时间分别减少了3.85%和1.46%。由此表明,基于AEDE智能算法可以优化多台拖拉机田间操作路径,显著提高农业生产效率工作效率,降低拖拉机田间运行时间。研究结果可为提升农业生产智能化管理提供理论借鉴与技术参考。 展开更多
关键词 无人拖拉机 路径优化 农业管理 差分进化算法 适应性参数
在线阅读 下载PDF
基于鲁棒优化的冷热电联供型微网混合储能经济配置 被引量:1
17
作者 范添圆 王海云 李晓柯 《电源学报》 CSCD 北大核心 2024年第S01期105-115,共11页
为解决源荷双侧不确定性对冷热电联供CCHP(combined cooling,heating and power)型微网经济运行带来的电量实时平衡问题,提出一种基于鲁棒理论的CCHP微网电、热、冷混合储能容量配置模型。基于鲁棒理论,建立源荷双侧不确定性变量合集。... 为解决源荷双侧不确定性对冷热电联供CCHP(combined cooling,heating and power)型微网经济运行带来的电量实时平衡问题,提出一种基于鲁棒理论的CCHP微网电、热、冷混合储能容量配置模型。基于鲁棒理论,建立源荷双侧不确定性变量合集。考虑储能设备日折算成本,以微网运行成本最低为目标,采用自适应差分进化算法对模型进行求解,得到不同预测精度与置信概率下的微网储能最优容量合集。通过设置评价指标,选取最合适的储能配置方案,对微网配置储能前后的调度情况作对比。结果表明,基于鲁棒理论配置的电、热、冷这3类储能可有效提升微网在源荷双侧不确定下的电力电量实时平衡能力与运行经济性。 展开更多
关键词 微网 鲁棒理论 混合储能 差分进化算法
在线阅读 下载PDF
基于模糊需求和模糊运输时间的多式联运路径优化 被引量:9
18
作者 杨喆 邓立宝 +1 位作者 狄原竹 李春磊 《控制理论与应用》 EI CAS CSCD 北大核心 2024年第6期967-976,共10页
考虑不确定性的模糊多式联运路径优化研究,可以在满足运输方案经济环保双重要求的同时,增强运输方案的鲁棒性,提高企业的抗风险能力.本文建立了模糊需求和模糊运输时间下低碳低成本多式联运路径优化模型,针对连续型元启发式算法无法直... 考虑不确定性的模糊多式联运路径优化研究,可以在满足运输方案经济环保双重要求的同时,增强运输方案的鲁棒性,提高企业的抗风险能力.本文建立了模糊需求和模糊运输时间下低碳低成本多式联运路径优化模型,针对连续型元启发式算法无法直接求解离散型组合优化模型的问题,设计了基于优先级的通用编码方式.在此基础上,为进一步提高算法的求解质量,提出了带启发式因子的特殊解码方式,并且提出了一种带邻域搜索策略的自适应差分进化算法.结果表明,改进算法获得的最终方案在蒙特卡罗采样的大多数场景下满足约束,方案稳定性强,目标值最低. 展开更多
关键词 不确定优化 模糊 局部搜索 差分进化算法 蒙特卡罗采样
在线阅读 下载PDF
基于进化集成学习的用户购买意向预测
19
作者 张一凡 于千城 张丽丝 《计算机应用研究》 CSCD 北大核心 2024年第2期368-374,共7页
在电子商务时代背景下,精准预测用户的购买意向已经成为提高销售效率和优化客户体验的关键因素。针对传统集成策略在模型设计阶段往往受人为因素限制的问题,构建了一种自适应进化集成学习模型用于预测用户的购买意向。该模型能够自适应... 在电子商务时代背景下,精准预测用户的购买意向已经成为提高销售效率和优化客户体验的关键因素。针对传统集成策略在模型设计阶段往往受人为因素限制的问题,构建了一种自适应进化集成学习模型用于预测用户的购买意向。该模型能够自适应地选择最优基学习器和元学习器,并融合基学习器的预测信息和特征间的差异性扩展特征维度,从而提高预测的准确性。此外,为进一步优化模型的预测效果,设计了一种二元自适应差分进化算法进行特征选择,旨在筛选出对预测结果有显著影响的特征。研究结果表明,与传统优化算法相比,二元自适应差分进化算法在全局搜索和特征选择方面表现优异。相较于六种常见的集成模型和DeepForest模型,所构建的进化集成模型在AUC值上分别提高了2.76%和2.72%,并且能够缓解数据不平衡所带来的影响。 展开更多
关键词 购买预测 差分进化算法 进化集成 特征选择 模型选择
在线阅读 下载PDF
分布式数据驱动的多约束进化优化算法
20
作者 魏凤凤 陈伟能 《计算机应用》 CSCD 北大核心 2024年第5期1393-1400,共8页
泛在计算模式下,数据分布式获取和处理带来了分布式数据驱动优化的需求。针对数据分布获取、约束异步评估且信息缺失的挑战,构建分布式数据驱动的多约束进化优化算法(DDDEA)框架,由一系列终端节点负责数据提供和分布式评估,服务器节点... 泛在计算模式下,数据分布式获取和处理带来了分布式数据驱动优化的需求。针对数据分布获取、约束异步评估且信息缺失的挑战,构建分布式数据驱动的多约束进化优化算法(DDDEA)框架,由一系列终端节点负责数据提供和分布式评估,服务器节点负责全局进化优化。基于该框架具体实现了一个算法实例,终端节点利用局部数据构建径向基函数(RBF)模型,辅助驱动服务器节点差分进化(DE)算法对问题进行寻优。通过与3个集中式数据驱动的多约束进化优化算法在两个标准测试集的实验对比,DDDEA在68.4%的测试用例中取得显著最优结果,在84.2%的测试用例中找到可行解的成功率为1.00,表明该算法具有良好的全局搜索能力和收敛能力。 展开更多
关键词 分布式优化 数据驱动优化 约束优化 进化计算 差分进化算法
在线阅读 下载PDF
上一页 1 2 7 下一页 到第
使用帮助 返回顶部