Hefei Light Source(HLS)is a synchrotron radiation light source that primarily produces vacuum ultraviolet and soft X-rays.It currently consists of ten experimental stations,including a soft X-ray microscopy station.As...Hefei Light Source(HLS)is a synchrotron radiation light source that primarily produces vacuum ultraviolet and soft X-rays.It currently consists of ten experimental stations,including a soft X-ray microscopy station.As part of its on-going efforts to establish a centralized scientific data management platform,HLS is in the process of developing a test sys-tem that covers the entire lifecycle of scientific data,including data generation,acquisition,processing,analysis,and de-struction.However,the instruments used in the soft X-ray microscopy experimental station rely on commercial propriet-ary software for data acquisition and processing.We developed a semi-automatic data acquisition program to facilitate the integration of soft X-ray microscopy stations into a centralized scientific data management platform.Additionally,we cre-ated an online data processing platform to assist users in analyzing their scientific data.The system we developed and de-ployed meets the design requirements,successfully integrating the soft X-ray microscopy station into the full lifecycle management of scientific data.展开更多
Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the ...Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.展开更多
The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological, structural,geochemical,geophysical,and borehole data.Luan...The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological, structural,geochemical,geophysical,and borehole data.Luanchuan,the case study area,southwestern Henan Province,is an important molybdenum-tungsten -lead-zinc polymetallic belt in China.展开更多
Source location is the core foundation of microseismic monitoring.To date,commonly used location methods have usually been based on the ray-tracing travel-time technique,which generally adopts an L1 or L2 norm to esta...Source location is the core foundation of microseismic monitoring.To date,commonly used location methods have usually been based on the ray-tracing travel-time technique,which generally adopts an L1 or L2 norm to establish the location objective function.However,the L1 norm usually achieves low location accuracy,whereas the L2 norm is easily affected by large P-wave arrival-time picking errors.In addition,traditional location methods may be affected by the initial iteration point used to find a local optimum location.Furthermore,the P-wave arrival-time data that have travelled long distances are usually poor in quality.To address these problems,this paper presents a microseismic source location method using the Log-Cosh function and distant sensor-removed P-wave arrival data.Its basic principles are as follows:First,the source location objective function is established using the Log-Cosh function.This function has the stability of the L1 norm and location accuracy of the L2 norm.Then,multiple initial points are generated randomly in the mining area,and the established Log-Cosh location objective function is used to obtain multiple corresponding location results.The average value of the 50 location points with the largest data field potential values is treated as the initial location result.Next,the P-wave travel times from the initial location result to triggered sensors are calculated,and then the P-wave arrival data with travel times exceeding 0.2 s are removed.Finally,the aforementioned location steps are repeated with the denoised P-wave arrival dataset to obtain a high-precision location result.Two synthetic events and eight blasting events from the Yongshaba mine,China,were used to test the proposed method.Regardless of whether the P-wave arrival data with long travel times were eliminated,the location error of the proposed method was smaller than that of the L1/L2 norm and trigger-time-based location method(TT1/TT2 method).Furthermore,after eliminating the Pwave arrival data with long travel distances,the location accuracy of these three location methods increased,indicating that the proposed location method has good application prospects.展开更多
高放废物地质处置特别是地下实验室研发过程中的多源数据融合挖掘研究具有重要意义(Wang Ju et al.,2018)。然而,目前阶段尚未实现对研发过程中多源数据的融合挖掘与二次应用。针对上述问题,从地下实验室多源监测数据特点出发,在确定地...高放废物地质处置特别是地下实验室研发过程中的多源数据融合挖掘研究具有重要意义(Wang Ju et al.,2018)。然而,目前阶段尚未实现对研发过程中多源数据的融合挖掘与二次应用。针对上述问题,从地下实验室多源监测数据特点出发,在确定地下实验室多源监测数据模型构建的基础上,结合深度学习技术,初步构建了地下实验室多源监测数据融合技术方法,并初步开展了数据融合设计,为处置库场址评价和安全评价等综合评价工作提供了新的研究思路。展开更多
基金supported by the Fundamental Research Funds for the Central Universities(WK2310000102)。
文摘Hefei Light Source(HLS)is a synchrotron radiation light source that primarily produces vacuum ultraviolet and soft X-rays.It currently consists of ten experimental stations,including a soft X-ray microscopy station.As part of its on-going efforts to establish a centralized scientific data management platform,HLS is in the process of developing a test sys-tem that covers the entire lifecycle of scientific data,including data generation,acquisition,processing,analysis,and de-struction.However,the instruments used in the soft X-ray microscopy experimental station rely on commercial propriet-ary software for data acquisition and processing.We developed a semi-automatic data acquisition program to facilitate the integration of soft X-ray microscopy stations into a centralized scientific data management platform.Additionally,we cre-ated an online data processing platform to assist users in analyzing their scientific data.The system we developed and de-ployed meets the design requirements,successfully integrating the soft X-ray microscopy station into the full lifecycle management of scientific data.
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation under Grant No.2022M720419。
文摘Automatic modulation recognition(AMR)of radiation source signals is a research focus in the field of cognitive radio.However,the AMR of radiation source signals at low SNRs still faces a great challenge.Therefore,the AMR method of radiation source signals based on two-dimensional data matrix and improved residual neural network is proposed in this paper.First,the time series of the radiation source signals are reconstructed into two-dimensional data matrix,which greatly simplifies the signal preprocessing process.Second,the depthwise convolution and large-size convolutional kernels based residual neural network(DLRNet)is proposed to improve the feature extraction capability of the AMR model.Finally,the model performs feature extraction and classification on the two-dimensional data matrix to obtain the recognition vector that represents the signal modulation type.Theoretical analysis and simulation results show that the AMR method based on two-dimensional data matrix and improved residual network can significantly improve the accuracy of the AMR method.The recognition accuracy of the proposed method maintains a high level greater than 90% even at -14 dB SNR.
文摘The development of 3D geological models involves the integration of large amounts of geological data,as well as additional accessible proprietary lithological, structural,geochemical,geophysical,and borehole data.Luanchuan,the case study area,southwestern Henan Province,is an important molybdenum-tungsten -lead-zinc polymetallic belt in China.
基金Project(cstc2020jcyj-bshX0106)supported by the Chongqing Postdoctoral Science Foundation,ChinaProject(2020M683247)supported by the China Postdoctoral Science Foundation+1 种基金Project(cstc2020jcyj-zdxmX0023)supported by the Key Natural Science Foundation Project of Chongqing,ChinaProject(551974043)supported by the National Natural Science Foundation of China。
文摘Source location is the core foundation of microseismic monitoring.To date,commonly used location methods have usually been based on the ray-tracing travel-time technique,which generally adopts an L1 or L2 norm to establish the location objective function.However,the L1 norm usually achieves low location accuracy,whereas the L2 norm is easily affected by large P-wave arrival-time picking errors.In addition,traditional location methods may be affected by the initial iteration point used to find a local optimum location.Furthermore,the P-wave arrival-time data that have travelled long distances are usually poor in quality.To address these problems,this paper presents a microseismic source location method using the Log-Cosh function and distant sensor-removed P-wave arrival data.Its basic principles are as follows:First,the source location objective function is established using the Log-Cosh function.This function has the stability of the L1 norm and location accuracy of the L2 norm.Then,multiple initial points are generated randomly in the mining area,and the established Log-Cosh location objective function is used to obtain multiple corresponding location results.The average value of the 50 location points with the largest data field potential values is treated as the initial location result.Next,the P-wave travel times from the initial location result to triggered sensors are calculated,and then the P-wave arrival data with travel times exceeding 0.2 s are removed.Finally,the aforementioned location steps are repeated with the denoised P-wave arrival dataset to obtain a high-precision location result.Two synthetic events and eight blasting events from the Yongshaba mine,China,were used to test the proposed method.Regardless of whether the P-wave arrival data with long travel times were eliminated,the location error of the proposed method was smaller than that of the L1/L2 norm and trigger-time-based location method(TT1/TT2 method).Furthermore,after eliminating the Pwave arrival data with long travel distances,the location accuracy of these three location methods increased,indicating that the proposed location method has good application prospects.
文摘高放废物地质处置特别是地下实验室研发过程中的多源数据融合挖掘研究具有重要意义(Wang Ju et al.,2018)。然而,目前阶段尚未实现对研发过程中多源数据的融合挖掘与二次应用。针对上述问题,从地下实验室多源监测数据特点出发,在确定地下实验室多源监测数据模型构建的基础上,结合深度学习技术,初步构建了地下实验室多源监测数据融合技术方法,并初步开展了数据融合设计,为处置库场址评价和安全评价等综合评价工作提供了新的研究思路。
