Mooring cable tension is a crucial parameter for evaluating the safety and reliability of a floating platform mooring system.The real-time mooring tension in an actual marine environment has always been essential data...Mooring cable tension is a crucial parameter for evaluating the safety and reliability of a floating platform mooring system.The real-time mooring tension in an actual marine environment has always been essential data that mooring system designers aim to acquire.To address the need for long-term continuous monitoring of mooring tension in deep-sea marine environments,this paper presents a mooring cable tension monitoring method based on the principle of direct mechanical measurement.The developed tension monitoring sensors were installed and applied in the mooring system of the"Yongle"scientific experimental platform.Over the course of one year,a substantial amount of in-situ tension monitoring data was obtained.Under wave heights of up to 1.24 m,the mooring tension on the floating platform reached 16.5 tons.Through frequency domain and time domain analysis,the spectral characteristics of mooring tension,including waveinduced force,slow drift force,and mooring cable elastic restoring force,were determined.The mooring cable elastic restoring force frequency was approximately half of that of the wave signal.Due to the characteristics of the hinge connection structure of the dual module floating platform,under some specific working conditions the wave-induced force was the maximum of the three different frequency forces,and restoring force was the smallest.展开更多
In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this stu...In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.展开更多
In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel m...In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel mycelium growth rate method was employed to assess the toxicity of 13 fungicides,including a combination of 45%prochloraz and 125 g·mL^(-1)epoxiconazole,against R.solani.Additionally,the resistance of 99 R.solani strains to thifluzamide across various regions was also evaluated.The findings indicated that 75%trifloxystrobin-tebuconazole exhibited the most effective inhibitory effect,with an effective inhibitory medium concentration(EC50)value of 0.0101μg·mL^(-1).The EC50 values for 20%prothioconazole,125 g·mL^(-1)epoxiconazole,24%thifluzamide,and 50%hexaconazole were all less than 10μg·mL^(-1),indicating a better inhibitory effect on R.solani.The strongest synergistic effect was noted in the mixture of prochloraz and epoxiconazole at a 1:2 ratio,resulting in an EC50 value of 2.9917μg·mL^(-1),and a co-toxicity coefficient of 213.38.Among the 34 strains from Harbin City,the average EC50 value was 196.9341μg·mL^(-1)indicating the highest susceptiblility to thifluzamide.Conversely,15 strains from Shuangyashan City exhibited an average EC50 value of 364.7323μg·mL^(-1),reflecting the lowest sensitivity to thifluzamide.The sensitivity baseline EC50 value for R.solani was 253.8854μg·mL^(-1),with an overall resistance level between 0.1567 and 3.3292,indicating that the resistance level of R.solani in Heilongjiang Province remained low.Therefore,R.solani was still sensitive to thifluzamide in most areas of Heilongjiang Province,but there was a certain risk of resistance in Qitaihe City,which needed to be continuously monitored.At the same time,this study might provide a theoretical foundation for enhancing the prevention and management of the rice sheath blight.展开更多
Controlled laboratory experiments are proved to be a valuable tool for investigating changes in underground physical properties and the related response of surface geophysical signals.The self-potential(SP)method is w...Controlled laboratory experiments are proved to be a valuable tool for investigating changes in underground physical properties and the related response of surface geophysical signals.The self-potential(SP)method is widely used in mineral resource exploration due to its direct correlation with underground electrochemical gradients.This paper presented the design and construction of an experimental platform based on a multi-channel SP monitoring system.The proposed platform was used to monitor the anodizing corrosion process of different metal blocks from a laboratory perspective,record the real-time SP signal generated by the redox reaction,as well as investigate the geobattery mechanism associated with the natural polarization process of metal mineral resources.The experimental results demonstrate that the constructed SP monitoring platform effectively captures time-series SP signals and provides direct laboratory evidence for the geobattery model.The measured SP data were quantitatively interpreted using the simulated annealing algorithm,and the inversion results closely match the real model.This finding highlights the potential of the SP method as a promising tool for determining the location and spatial distribution of underground polarizers.The study holds reference value for the exploration and exploitation of mineral resources in both terrestrial and marine environments.展开更多
Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enh...Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.展开更多
As a dynamic projection to latent structures(PLS)method with a good output prediction ability,dynamic inner PLS(DiPLS)is widely used in the prediction of key performance indi-cators.However,due to the oblique decompos...As a dynamic projection to latent structures(PLS)method with a good output prediction ability,dynamic inner PLS(DiPLS)is widely used in the prediction of key performance indi-cators.However,due to the oblique decomposition of the input space by DiPLS,there are false alarms in the actual industrial process during fault detection.To address the above problems,a dynamic modeling method based on autoregressive-dynamic inner total PLS(AR-DiTPLS)is proposed.The method first uses the regression relation matrix to decompose the input space orthogonally,which reduces useless information for the predic-tion output in the quality-related dynamic subspace.Then,a vector autoregressive model(VAR)is constructed for the predic-tion score to separate dynamic information and static informa-tion.Based on the VAR model,appropriate statistical indicators are further constructed for online monitoring,which reduces the occurrence of false alarms.The effectiveness of the method is verified by a Tennessee-Eastman industrial simulation process and a three-phase flow system.展开更多
[Objective]Real-time monitoring of cow ruminant behavior is of paramount importance for promptly obtaining relevant information about cow health and predicting cow diseases.Currently,various strategies have been propo...[Objective]Real-time monitoring of cow ruminant behavior is of paramount importance for promptly obtaining relevant information about cow health and predicting cow diseases.Currently,various strategies have been proposed for monitoring cow ruminant behavior,including video surveillance,sound recognition,and sensor monitoring methods.How‐ever,the application of edge device gives rise to the issue of inadequate real-time performance.To reduce the volume of data transmission and cloud computing workload while achieving real-time monitoring of dairy cow rumination behavior,a real-time monitoring method was proposed for cow ruminant behavior based on edge computing.[Methods]Autono‐mously designed edge devices were utilized to collect and process six-axis acceleration signals from cows in real-time.Based on these six-axis data,two distinct strategies,federated edge intelligence and split edge intelligence,were investigat‐ed for the real-time recognition of cow ruminant behavior.Focused on the real-time recognition method for cow ruminant behavior leveraging federated edge intelligence,the CA-MobileNet v3 network was proposed by enhancing the MobileNet v3 network with a collaborative attention mechanism.Additionally,a federated edge intelligence model was designed uti‐lizing the CA-MobileNet v3 network and the FedAvg federated aggregation algorithm.In the study on split edge intelli‐gence,a split edge intelligence model named MobileNet-LSTM was designed by integrating the MobileNet v3 network with a fusion collaborative attention mechanism and the Bi-LSTM network.[Results and Discussions]Through compara‐tive experiments with MobileNet v3 and MobileNet-LSTM,the federated edge intelligence model based on CA-Mo‐bileNet v3 achieved an average Precision rate,Recall rate,F1-Score,Specificity,and Accuracy of 97.1%,97.9%,97.5%,98.3%,and 98.2%,respectively,yielding the best recognition performance.[Conclusions]It is provided a real-time and effective method for monitoring cow ruminant behavior,and the proposed federated edge intelligence model can be ap‐plied in practical settings.展开更多
随着锂电池领域论文数量的激增和研究主题的日益丰富,准确监测该领域的发展趋势和把握最新研究动向变得日益复杂。通过运用大数据和机器学习技术,采用BERTopic主题模型对Web of Science数据库中的18万余篇锂电池论文进行文本分析,绘制...随着锂电池领域论文数量的激增和研究主题的日益丰富,准确监测该领域的发展趋势和把握最新研究动向变得日益复杂。通过运用大数据和机器学习技术,采用BERTopic主题模型对Web of Science数据库中的18万余篇锂电池论文进行文本分析,绘制了锂电池领域的主题图,识别了新兴研究主题和高被引主题。结果表明,锂电池研究活动正显著加速,锂硫电池、锂枝晶生长抑制、电池回收和金属回收等新兴主题快速发展,而材料研究如二硫化钼纳米材料、氧化铁电极材料则具有显著的高学术影响力。研究还探讨了《锂电池百篇论文点评系列》对当前锂电池研究主题的监测情况,该系列对多数科学技术主题有良好覆盖。本研究为锂电池领域的主题监测提供了新方法,为政策制定和技术研发提供了情报支持,并为“锂电池百篇论文点评”系列的后续研究提供了参考。展开更多
文摘Mooring cable tension is a crucial parameter for evaluating the safety and reliability of a floating platform mooring system.The real-time mooring tension in an actual marine environment has always been essential data that mooring system designers aim to acquire.To address the need for long-term continuous monitoring of mooring tension in deep-sea marine environments,this paper presents a mooring cable tension monitoring method based on the principle of direct mechanical measurement.The developed tension monitoring sensors were installed and applied in the mooring system of the"Yongle"scientific experimental platform.Over the course of one year,a substantial amount of in-situ tension monitoring data was obtained.Under wave heights of up to 1.24 m,the mooring tension on the floating platform reached 16.5 tons.Through frequency domain and time domain analysis,the spectral characteristics of mooring tension,including waveinduced force,slow drift force,and mooring cable elastic restoring force,were determined.The mooring cable elastic restoring force frequency was approximately half of that of the wave signal.Due to the characteristics of the hinge connection structure of the dual module floating platform,under some specific working conditions the wave-induced force was the maximum of the three different frequency forces,and restoring force was the smallest.
文摘In order to address the current inability of screen printing to monitor printing pressure online,an online printing pressure monitoring system applied to screen printing machines was designed in this study.In this study,the consistency of printed electrodes was measured by using a confocal microscope and the pressure distribution detected by online pressure monitoring system was compared to investigate the relationship.The results demonstrated the relationship between printing pressure and the consistency of printed electrodes.As printing pressure increases,the ink layer at the corresponding position becomes thicker and that higher printing pressure enhances the consistency of the printed electrodes.The experiment confirms the feasibility of the online pressure monitoring system,which aids in predicting and controlling the consistency of printed electrodes,thereby improving their performance.
基金Supported by the Green Plant Protection Project(213010801)the Heilongjiang Province Key Research and Development Plan Project(20232X02 B0502)the Natural Science Foundation of Heilongjiang Province(LH2022C022)。
文摘In recent years,the prevalence of rice sheath blight caused by Rhizoctonia solani has significantly increased in Heilongjiang Province.Chemical control has become the primary control method.To cope with this,a novel mycelium growth rate method was employed to assess the toxicity of 13 fungicides,including a combination of 45%prochloraz and 125 g·mL^(-1)epoxiconazole,against R.solani.Additionally,the resistance of 99 R.solani strains to thifluzamide across various regions was also evaluated.The findings indicated that 75%trifloxystrobin-tebuconazole exhibited the most effective inhibitory effect,with an effective inhibitory medium concentration(EC50)value of 0.0101μg·mL^(-1).The EC50 values for 20%prothioconazole,125 g·mL^(-1)epoxiconazole,24%thifluzamide,and 50%hexaconazole were all less than 10μg·mL^(-1),indicating a better inhibitory effect on R.solani.The strongest synergistic effect was noted in the mixture of prochloraz and epoxiconazole at a 1:2 ratio,resulting in an EC50 value of 2.9917μg·mL^(-1),and a co-toxicity coefficient of 213.38.Among the 34 strains from Harbin City,the average EC50 value was 196.9341μg·mL^(-1)indicating the highest susceptiblility to thifluzamide.Conversely,15 strains from Shuangyashan City exhibited an average EC50 value of 364.7323μg·mL^(-1),reflecting the lowest sensitivity to thifluzamide.The sensitivity baseline EC50 value for R.solani was 253.8854μg·mL^(-1),with an overall resistance level between 0.1567 and 3.3292,indicating that the resistance level of R.solani in Heilongjiang Province remained low.Therefore,R.solani was still sensitive to thifluzamide in most areas of Heilongjiang Province,but there was a certain risk of resistance in Qitaihe City,which needed to be continuously monitored.At the same time,this study might provide a theoretical foundation for enhancing the prevention and management of the rice sheath blight.
基金Project(42174170)supported by the National Natural Science Foundation of China。
文摘Controlled laboratory experiments are proved to be a valuable tool for investigating changes in underground physical properties and the related response of surface geophysical signals.The self-potential(SP)method is widely used in mineral resource exploration due to its direct correlation with underground electrochemical gradients.This paper presented the design and construction of an experimental platform based on a multi-channel SP monitoring system.The proposed platform was used to monitor the anodizing corrosion process of different metal blocks from a laboratory perspective,record the real-time SP signal generated by the redox reaction,as well as investigate the geobattery mechanism associated with the natural polarization process of metal mineral resources.The experimental results demonstrate that the constructed SP monitoring platform effectively captures time-series SP signals and provides direct laboratory evidence for the geobattery model.The measured SP data were quantitatively interpreted using the simulated annealing algorithm,and the inversion results closely match the real model.This finding highlights the potential of the SP method as a promising tool for determining the location and spatial distribution of underground polarizers.The study holds reference value for the exploration and exploitation of mineral resources in both terrestrial and marine environments.
基金National Science Foundation of Zhejiang under Contract(LY23E010001)。
文摘Structural health monitoring is widely utilized in outdoor environments,especially under harsh conditions,which can introduce noise into the monitoring system.Therefore,designing an effective denoising strategy to enhance the performance of guided wave damage detection in noisy environments is crucial.This paper introduces a local temporal principal component analysis(PCA)reconstruction approach for denoising guided waves prior to implementing unsupervised damage detection,achieved through novel autoencoder-based reconstruction.Experimental results demonstrate that the proposed denoising method significantly enhances damage detection performance when guided waves are contaminated by noise,with SNR values ranging from 10 to-5 dB.Following the implementation of the proposed denoising approach,the AUC score can elevate from 0.65 to 0.96 when dealing with guided waves corrputed by noise at a level of-5 dB.Additionally,the paper provides guidance on selecting the appropriate number of components used in the denoising PCA reconstruction,aiding in the optimization of the damage detection in noisy conditions.
基金supported by the National Natural Science Foundation of China(62273354,61673387,61833016).
文摘As a dynamic projection to latent structures(PLS)method with a good output prediction ability,dynamic inner PLS(DiPLS)is widely used in the prediction of key performance indi-cators.However,due to the oblique decomposition of the input space by DiPLS,there are false alarms in the actual industrial process during fault detection.To address the above problems,a dynamic modeling method based on autoregressive-dynamic inner total PLS(AR-DiTPLS)is proposed.The method first uses the regression relation matrix to decompose the input space orthogonally,which reduces useless information for the predic-tion output in the quality-related dynamic subspace.Then,a vector autoregressive model(VAR)is constructed for the predic-tion score to separate dynamic information and static informa-tion.Based on the VAR model,appropriate statistical indicators are further constructed for online monitoring,which reduces the occurrence of false alarms.The effectiveness of the method is verified by a Tennessee-Eastman industrial simulation process and a three-phase flow system.
文摘[Objective]Real-time monitoring of cow ruminant behavior is of paramount importance for promptly obtaining relevant information about cow health and predicting cow diseases.Currently,various strategies have been proposed for monitoring cow ruminant behavior,including video surveillance,sound recognition,and sensor monitoring methods.How‐ever,the application of edge device gives rise to the issue of inadequate real-time performance.To reduce the volume of data transmission and cloud computing workload while achieving real-time monitoring of dairy cow rumination behavior,a real-time monitoring method was proposed for cow ruminant behavior based on edge computing.[Methods]Autono‐mously designed edge devices were utilized to collect and process six-axis acceleration signals from cows in real-time.Based on these six-axis data,two distinct strategies,federated edge intelligence and split edge intelligence,were investigat‐ed for the real-time recognition of cow ruminant behavior.Focused on the real-time recognition method for cow ruminant behavior leveraging federated edge intelligence,the CA-MobileNet v3 network was proposed by enhancing the MobileNet v3 network with a collaborative attention mechanism.Additionally,a federated edge intelligence model was designed uti‐lizing the CA-MobileNet v3 network and the FedAvg federated aggregation algorithm.In the study on split edge intelli‐gence,a split edge intelligence model named MobileNet-LSTM was designed by integrating the MobileNet v3 network with a fusion collaborative attention mechanism and the Bi-LSTM network.[Results and Discussions]Through compara‐tive experiments with MobileNet v3 and MobileNet-LSTM,the federated edge intelligence model based on CA-Mo‐bileNet v3 achieved an average Precision rate,Recall rate,F1-Score,Specificity,and Accuracy of 97.1%,97.9%,97.5%,98.3%,and 98.2%,respectively,yielding the best recognition performance.[Conclusions]It is provided a real-time and effective method for monitoring cow ruminant behavior,and the proposed federated edge intelligence model can be ap‐plied in practical settings.
文摘随着锂电池领域论文数量的激增和研究主题的日益丰富,准确监测该领域的发展趋势和把握最新研究动向变得日益复杂。通过运用大数据和机器学习技术,采用BERTopic主题模型对Web of Science数据库中的18万余篇锂电池论文进行文本分析,绘制了锂电池领域的主题图,识别了新兴研究主题和高被引主题。结果表明,锂电池研究活动正显著加速,锂硫电池、锂枝晶生长抑制、电池回收和金属回收等新兴主题快速发展,而材料研究如二硫化钼纳米材料、氧化铁电极材料则具有显著的高学术影响力。研究还探讨了《锂电池百篇论文点评系列》对当前锂电池研究主题的监测情况,该系列对多数科学技术主题有良好覆盖。本研究为锂电池领域的主题监测提供了新方法,为政策制定和技术研发提供了情报支持,并为“锂电池百篇论文点评”系列的后续研究提供了参考。
