This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hype...This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.展开更多
The on line computational burden related to model predictive control (MPC) of large scale constrained systems hampers its real time applications and limits it to slow dynamic process with moderate number of inputs....The on line computational burden related to model predictive control (MPC) of large scale constrained systems hampers its real time applications and limits it to slow dynamic process with moderate number of inputs. To avoid this, an efficient and fast algorithm based on aggregation optimization is proposed in this paper. It only optimizes the current control action at time instant k , while other future control sequences in the optimization horizon are approximated off line by the linear feedback control sequence, so the on line optimization can be converted into a low dimensional quadratic programming problem. Input constraints can be well handled in this scheme. The comparable performance is achieved with existing standard model predictive control algorithm. Simulation results well demonstrate its effectiveness.展开更多
This work is concerned with identification and nonlinear predictive control method for MIMO Hammerstein systems with constraints. Firstly, an identification method based on steady-state responses and sub-model method ...This work is concerned with identification and nonlinear predictive control method for MIMO Hammerstein systems with constraints. Firstly, an identification method based on steady-state responses and sub-model method is introduced to MIMO Hammerstein system. A modified version of artificial bee colony algorithm is proposed to improve the prediction ability of Hammerstein model. Next, a computationally efficient nonlinear model predictive control algorithm(MGPC) is developed to deal with constrained problem of MIMO system. The identification process and performance of MGPC are shown. Numerical results about a polymerization reactor validate the effectiveness of the proposed method and the comparisons show that MGPC has a better performance than QDMC and basic GPC.展开更多
Model predictive controllers(MPC)with the two-loop scheme are successful approaches practically and can be classified into two main categories,tube-based MPC and MPCbased reference governors(RG).In this paper,an enhan...Model predictive controllers(MPC)with the two-loop scheme are successful approaches practically and can be classified into two main categories,tube-based MPC and MPCbased reference governors(RG).In this paper,an enhanced twoloop MPC design is proposed for a pre-stabilized system with the bounded uncertainty subject to the input and state constraints.The proposed method offers less conservatism than the tube-based MPC methods by enlarging the restricted input constraint.Contrary to the MPC-based RGs,the investigated method improves tracking performance of the pre-stabilized system while satisfying the constraints.Additionally,the robust global asymptotic stability of the closed-loop system is guaranteed in a novel procedure with terminal constraint relaxation.Simulation of the proposed method on a servo system shows its effectiveness in comparison to the others.展开更多
The utilization of traffic information received from intelligent vehicle highway systems(IVHS) to plan velocity and split output power for multi-source vehicles is currently a research hotspot. However, it is an open ...The utilization of traffic information received from intelligent vehicle highway systems(IVHS) to plan velocity and split output power for multi-source vehicles is currently a research hotspot. However, it is an open issue to plan vehicle velocity and distribute output power between different supply units simultaneously due to the strongly coupling characteristic of the velocity planning and the power distribution. To address this issue, a flexible predictive power-split control strategy based on IVHS is proposed for electric vehicles(EVs) equipped with battery-supercapacitor system(BSS). Unlike hierarchical strategies to plan vehicle velocity and distribute output power separately, a monolayer model predictive control(MPC) method is employed to optimize them online at the same time. Firstly, a flexible velocity planning strategy is designed based on the signal phase and time(SPAT) information received from IVHS and then the Pontryagin’s minimum principle(PMP) is adopted to formulate the optimal control problem of the BSS. Then, the flexible velocity planning strategy and the optimal control problem of BSS are embedded into an MPC framework, which is online solved using the shooting method in a fashion of receding horizon. Simulation results verify that the proposed strategy achieves a superior performance compared with the hierarchical strategy in terms of transportation efficiency, battery capacity loss, energy consumption and computation time.展开更多
基金supported by the National Natural Science Foundation of China(12072090).
文摘This work proposes the application of an iterative learning model predictive control(ILMPC)approach based on an adaptive fault observer(FOBILMPC)for fault-tolerant control and trajectory tracking in air-breathing hypersonic vehicles.In order to increase the control amount,this online control legislation makes use of model predictive control(MPC)that is based on the concept of iterative learning control(ILC).By using offline data to decrease the linearized model’s faults,the strategy may effectively increase the robustness of the control system and guarantee that disturbances can be suppressed.An adaptive fault observer is created based on the suggested ILMPC approach in order to enhance overall fault tolerance by estimating and compensating for actuator disturbance and fault degree.During the derivation process,a linearized model of longitudinal dynamics is established.The suggested ILMPC approach is likely to be used in the design of hypersonic vehicle control systems since numerical simulations have demonstrated that it can decrease tracking error and speed up convergence when compared to the offline controller.
文摘The on line computational burden related to model predictive control (MPC) of large scale constrained systems hampers its real time applications and limits it to slow dynamic process with moderate number of inputs. To avoid this, an efficient and fast algorithm based on aggregation optimization is proposed in this paper. It only optimizes the current control action at time instant k , while other future control sequences in the optimization horizon are approximated off line by the linear feedback control sequence, so the on line optimization can be converted into a low dimensional quadratic programming problem. Input constraints can be well handled in this scheme. The comparable performance is achieved with existing standard model predictive control algorithm. Simulation results well demonstrate its effectiveness.
基金Projects(61573052,61273132)supported by the National Natural Science Foundation of China
文摘This work is concerned with identification and nonlinear predictive control method for MIMO Hammerstein systems with constraints. Firstly, an identification method based on steady-state responses and sub-model method is introduced to MIMO Hammerstein system. A modified version of artificial bee colony algorithm is proposed to improve the prediction ability of Hammerstein model. Next, a computationally efficient nonlinear model predictive control algorithm(MGPC) is developed to deal with constrained problem of MIMO system. The identification process and performance of MGPC are shown. Numerical results about a polymerization reactor validate the effectiveness of the proposed method and the comparisons show that MGPC has a better performance than QDMC and basic GPC.
基金Supported by National Natural Science Foundation of China （60504026, 60674041） and National High Technology Research and Development Program of China （863 Program）（2006AA04Z173）.
文摘Model predictive controllers(MPC)with the two-loop scheme are successful approaches practically and can be classified into two main categories,tube-based MPC and MPCbased reference governors(RG).In this paper,an enhanced twoloop MPC design is proposed for a pre-stabilized system with the bounded uncertainty subject to the input and state constraints.The proposed method offers less conservatism than the tube-based MPC methods by enlarging the restricted input constraint.Contrary to the MPC-based RGs,the investigated method improves tracking performance of the pre-stabilized system while satisfying the constraints.Additionally,the robust global asymptotic stability of the closed-loop system is guaranteed in a novel procedure with terminal constraint relaxation.Simulation of the proposed method on a servo system shows its effectiveness in comparison to the others.
基金supported by the National Natural Science Foundation of China (62173303)the Fundamental Research for the Zhejiang P rovincial Universities (RF-C2020003)。
文摘The utilization of traffic information received from intelligent vehicle highway systems(IVHS) to plan velocity and split output power for multi-source vehicles is currently a research hotspot. However, it is an open issue to plan vehicle velocity and distribute output power between different supply units simultaneously due to the strongly coupling characteristic of the velocity planning and the power distribution. To address this issue, a flexible predictive power-split control strategy based on IVHS is proposed for electric vehicles(EVs) equipped with battery-supercapacitor system(BSS). Unlike hierarchical strategies to plan vehicle velocity and distribute output power separately, a monolayer model predictive control(MPC) method is employed to optimize them online at the same time. Firstly, a flexible velocity planning strategy is designed based on the signal phase and time(SPAT) information received from IVHS and then the Pontryagin’s minimum principle(PMP) is adopted to formulate the optimal control problem of the BSS. Then, the flexible velocity planning strategy and the optimal control problem of BSS are embedded into an MPC framework, which is online solved using the shooting method in a fashion of receding horizon. Simulation results verify that the proposed strategy achieves a superior performance compared with the hierarchical strategy in terms of transportation efficiency, battery capacity loss, energy consumption and computation time.
