In multi-user multiple input multiple output （MU-MIMO） systems, the outdated channel state information at the transmit- ter caused by channel time variation has been shown to greatly reduce the achievable ergodic su...In multi-user multiple input multiple output （MU-MIMO） systems, the outdated channel state information at the transmit- ter caused by channel time variation has been shown to greatly reduce the achievable ergodic sum capacity. A simple yet effec- tive solution to this problem is presented by designing a channel extrapolator relying on Karhunen-Loeve （KL） expansion of time- varying channels. In this scheme, channel estimation is done at the base station （BS） rather than at the user terminal （UT）, which thereby dispenses the channel parameters feedback from the UT to the BS. Moreover, the inherent channel correlation and the parsimonious parameterization properties of the KL expan- sion are respectively exploited to reduce the channel mismatch error and the computational complexity. Simulations show that the presented scheme outperforms conventional schemes in terms of both channel estimation mean square error （MSE） and ergodic capacity.展开更多
A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing...A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing the limited sensor measurements, the entire structure response can be estimated based on the system equivalent reduction-expansion process(SEREP) method. In order to compare the capability of capturing the structural vibration response with other optimal sensor placement(OSP) methods, the effective independence(EI) method, modal kinetic energy(MKE) method and modal assurance criterion(MAC) method, were also investigated. A statistical criterion, root mean square error(RMSE), was employed to assess the magnitude of the estimation error between the real response and the estimated response. For investigating the effectiveness and accuracy of the above OSP methods, a 31-bar truss structure is introduced as a simulation example. The analysis results show that both the maximum and mean of the RMSE value obtained from the EEM method are smaller than those from other OSP methods, which indicates that the optimal sensor configuration obtained from the EEM method can provide a more accurate estimation of the entire structure response compared with the EI, MKE and MAC methods.展开更多
Compared with the rank reduction estimator(RARE) based on second-order statistics(called SOS-RARE), the RARE based on fourth-order cumulants(referred to as FOC-RARE) can handle more sources and restrain the negative i...Compared with the rank reduction estimator(RARE) based on second-order statistics(called SOS-RARE), the RARE based on fourth-order cumulants(referred to as FOC-RARE) can handle more sources and restrain the negative impacts of the Gaussian colored noise. However, the unexpected modeling errors appearing in practice are known to significantly degrade the performance of the RARE. Therefore, the direction-of-arrival(DOA) estimation performance of the FOC-RARE is quantitatively derived. The explicit expression for direction-finding(DF) error is derived via the first-order perturbation analysis, and then the theoretical formula for the mean square error(MSE) is given. Simulation results demonstrate the validation of the theoretical analysis and reveal that the FOC-RARE is more robust to the unexpected modeling errors than the SOS-RARE.展开更多
在采用多天线高阶QAM的MIMO通信系统中,现有基于信道分组并行检测算法虽然接近最优检测性能但以牺牲计算效率为代价.针对这一问题,本文提出一种MMSE准则下基于信道分组的并行检测算法,不但有效降低计算复杂度,而且仍保证检测性能.该算...在采用多天线高阶QAM的MIMO通信系统中,现有基于信道分组并行检测算法虽然接近最优检测性能但以牺牲计算效率为代价.针对这一问题,本文提出一种MMSE准则下基于信道分组的并行检测算法,不但有效降低计算复杂度,而且仍保证检测性能.该算法采用MMSE准则下格归约算法改进分组后条件较好子信道矩阵特性,并在消除参考信号基础上利用改进的子信道矩阵对剩余信号以非线性方式进行检测.仿真结果表明:对4@4和6@6MIMO系统,该算法检测性能达到最优,对于8@8 MIMO系统,比最优算法所需信噪比提高约1dB.复杂度分析表明:相比现有信道分组检测算法,相同检测性能下该算法在6@6 M IMO系统中复杂度降低90%以上,在8@8 MIMO系统中复杂度降低98%以上.展开更多
针对采用最小均方误差(minimum mean square error,MMSE)检测算法在MIMO系统接收端进行检测时,需要进行大量伪逆运算导致检测复杂度增加的问题,提出了用一种基于迭代QR分解的MMSE V-BLAST算法,避免了伪逆运算,有效地降低了检测算法的复...针对采用最小均方误差(minimum mean square error,MMSE)检测算法在MIMO系统接收端进行检测时,需要进行大量伪逆运算导致检测复杂度增加的问题,提出了用一种基于迭代QR分解的MMSE V-BLAST算法,避免了伪逆运算,有效地降低了检测算法的复杂度,使系统检测性能得到了明显改善.在多散射物无线通信环境下进行仿真实验,结果表明,与传统的算法相比,提案算法在保证相同信噪比,误码率没有显著变化的前提下,系统检测复杂度明显改善.理论分析证明,系统中有效天线数目越多,所提出的算法优越性越明显.展开更多
非线性码间干扰是影响卫星通信的重要因素之一,需要有效消除或降低这种影响。在用Volterra级数分解表示非线性信道基础上,提出了基于线性MMSE(Minimum Mean Square Error)的Turbo均衡算法,以解决非线性码间干扰问题。通过对基于线性MMSE...非线性码间干扰是影响卫星通信的重要因素之一,需要有效消除或降低这种影响。在用Volterra级数分解表示非线性信道基础上,提出了基于线性MMSE(Minimum Mean Square Error)的Turbo均衡算法,以解决非线性码间干扰问题。通过对基于线性MMSE的Turbo均衡算法作无先验信息和低复杂度的MMSE近似处理,在不降低均衡性能的前提下,既能同时消除线性和非线性干扰,又能大大降低计算复杂度。仿真验证了该算法的有效性。展开更多
基金supported by the National Natural Science Foundation of China (6096200161071088)+2 种基金the Natural Science Foundation of Fujian Province of China (2012J05119)the Fundamental Research Funds for the Central Universities (11QZR02)the Research Fund of Guangxi Key Lab of Wireless Wideband Communication & Signal Processing (21104)
文摘In multi-user multiple input multiple output （MU-MIMO） systems, the outdated channel state information at the transmit- ter caused by channel time variation has been shown to greatly reduce the achievable ergodic sum capacity. A simple yet effec- tive solution to this problem is presented by designing a channel extrapolator relying on Karhunen-Loeve （KL） expansion of time- varying channels. In this scheme, channel estimation is done at the base station （BS） rather than at the user terminal （UT）, which thereby dispenses the channel parameters feedback from the UT to the BS. Moreover, the inherent channel correlation and the parsimonious parameterization properties of the KL expan- sion are respectively exploited to reduce the channel mismatch error and the computational complexity. Simulations show that the presented scheme outperforms conventional schemes in terms of both channel estimation mean square error （MSE） and ergodic capacity.
基金Project(2011CB013804)supported by the National Basic Research Program of China
文摘A methodology, termed estimation error minimization(EEM) method, was proposed to determine the optimal number and locations of sensors so as to better estimate the vibration response of the entire structure. Utilizing the limited sensor measurements, the entire structure response can be estimated based on the system equivalent reduction-expansion process(SEREP) method. In order to compare the capability of capturing the structural vibration response with other optimal sensor placement(OSP) methods, the effective independence(EI) method, modal kinetic energy(MKE) method and modal assurance criterion(MAC) method, were also investigated. A statistical criterion, root mean square error(RMSE), was employed to assess the magnitude of the estimation error between the real response and the estimated response. For investigating the effectiveness and accuracy of the above OSP methods, a 31-bar truss structure is introduced as a simulation example. The analysis results show that both the maximum and mean of the RMSE value obtained from the EEM method are smaller than those from other OSP methods, which indicates that the optimal sensor configuration obtained from the EEM method can provide a more accurate estimation of the entire structure response compared with the EI, MKE and MAC methods.
基金Project(61201381) supported by the National Natural Science Foundation of ChinaProject(YP12JJ202057) supported by the Future Development Foundation of Zhengzhou Information Science and Technology College,China
文摘Compared with the rank reduction estimator(RARE) based on second-order statistics(called SOS-RARE), the RARE based on fourth-order cumulants(referred to as FOC-RARE) can handle more sources and restrain the negative impacts of the Gaussian colored noise. However, the unexpected modeling errors appearing in practice are known to significantly degrade the performance of the RARE. Therefore, the direction-of-arrival(DOA) estimation performance of the FOC-RARE is quantitatively derived. The explicit expression for direction-finding(DF) error is derived via the first-order perturbation analysis, and then the theoretical formula for the mean square error(MSE) is given. Simulation results demonstrate the validation of the theoretical analysis and reveal that the FOC-RARE is more robust to the unexpected modeling errors than the SOS-RARE.
文摘在采用多天线高阶QAM的MIMO通信系统中,现有基于信道分组并行检测算法虽然接近最优检测性能但以牺牲计算效率为代价.针对这一问题,本文提出一种MMSE准则下基于信道分组的并行检测算法,不但有效降低计算复杂度,而且仍保证检测性能.该算法采用MMSE准则下格归约算法改进分组后条件较好子信道矩阵特性,并在消除参考信号基础上利用改进的子信道矩阵对剩余信号以非线性方式进行检测.仿真结果表明:对4@4和6@6MIMO系统,该算法检测性能达到最优,对于8@8 MIMO系统,比最优算法所需信噪比提高约1dB.复杂度分析表明:相比现有信道分组检测算法,相同检测性能下该算法在6@6 M IMO系统中复杂度降低90%以上,在8@8 MIMO系统中复杂度降低98%以上.
文摘针对采用最小均方误差(minimum mean square error,MMSE)检测算法在MIMO系统接收端进行检测时,需要进行大量伪逆运算导致检测复杂度增加的问题,提出了用一种基于迭代QR分解的MMSE V-BLAST算法,避免了伪逆运算,有效地降低了检测算法的复杂度,使系统检测性能得到了明显改善.在多散射物无线通信环境下进行仿真实验,结果表明,与传统的算法相比,提案算法在保证相同信噪比,误码率没有显著变化的前提下,系统检测复杂度明显改善.理论分析证明,系统中有效天线数目越多,所提出的算法优越性越明显.
文摘非线性码间干扰是影响卫星通信的重要因素之一,需要有效消除或降低这种影响。在用Volterra级数分解表示非线性信道基础上,提出了基于线性MMSE(Minimum Mean Square Error)的Turbo均衡算法,以解决非线性码间干扰问题。通过对基于线性MMSE的Turbo均衡算法作无先验信息和低复杂度的MMSE近似处理,在不降低均衡性能的前提下,既能同时消除线性和非线性干扰,又能大大降低计算复杂度。仿真验证了该算法的有效性。
