A strong interface coupling is of vital importance to develop metal oxide/carbon nanocomposite anodes for next-generation lithium ion batteries.Herein,a rational N-doped carb on riveting strategy is designed to boost ...A strong interface coupling is of vital importance to develop metal oxide/carbon nanocomposite anodes for next-generation lithium ion batteries.Herein,a rational N-doped carb on riveting strategy is designed to boost the lithium storage performance of Fe3O4/N-doped carbon tubular structures.Poly pyrrole(PPy)has been used as the precursor for N-doped carbon.N-doped carbon-riveted Fe3O4/N-doped carbon(N-C@Fe3O4@N-C)nanocomposites were obtained by pyrolysis of PPy-coated FeOOH@PPy nanotubes in Ar atmosphere.When tested as an anode for LIBs,the N-C@Fe3O4@N-C displays a high reversible discharge capacity of 675.8 mA h g-1 after 100 cycles at a current density of 100 mA g-1 and very good rate capability(470 mA h g_1 at 2 A g-1),which significantly surpasses the performance of Fe3O4@N-C.TEM analysis reveals that after battery cycling the FeOx particles detached from the carbon fibers for Fe3O4@N-C,while for N-C@Fe3O4@N-C the FeOx particles were still trapped in the carbon matrix,thus preserving good electrical contact.Consequently,the superior performance of N-C@Fe3C)4@N-C is attributed to the synergistic effect between Fe3O4 and N-doped carbon combined with the unique structure properties of the nanocomposites.The strategy reported in this work is expected to be applicable for designing other electrode materials for LIBs.展开更多
Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of1–100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing ...Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of1–100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing the dimensions of a material into the nanoscale range usually results in the change of its physiochemical properties such as reactivity,crystallinity, and solubility. This review treats the convergence of last research news at the interface of nanostructured biomaterials and tissue engineering for emerging biomedical technologies such as scaffolding and tissue regeneration. The present review is organized into three main sections. The introduction concerns an overview of the increasing utility of nanostructured materials in the field of tissue engineering. It elucidates how nanotechnology, by working in the submicron length scale, assures the realization of a biocompatible interface that is able to reproduce the physiological cell–matrix interaction. The second, more technical section, concerns the design and fabrication of biocompatible surface characterized by micro- and submicroscale features, using microfabrication, nanolithography, and miscellaneous nanolithographic techniques.In the last part, we review the ongoing tissue engineering application of nanostructured materials and scaffolds in different fields such as neurology, cardiology, orthopedics, and skin tissue regeneration.展开更多
A simple hydrothermal route has been developed for the fabricating Zn O hierarchical micro/nanostructure with excellent reproducibility. SEM and TEM analysis show that the hierarchical rod is a single-crystal, suggest...A simple hydrothermal route has been developed for the fabricating Zn O hierarchical micro/nanostructure with excellent reproducibility. SEM and TEM analysis show that the hierarchical rod is a single-crystal, suggesting that many single-crystal micro/nanorods are assembled into Zn O hierarchical micro/nanostructures. The morphologies of the hierarchical rods can be conveniently tailored by changing the reaction parameters. And we also found citric acid plays a crucial role in the formation process of Zn O micro/nanostructures. Room-temperature photoluminescence spectra reveals that the Zn O hierarchical micro/nanostructures have a strong emission peak at 440 nm and several weak emission peaks at 420, 471 and541 nm, respectively.展开更多
SiGe spheres with different diameters are successfully fabricated on a virtual SiGe template using a laser irradiation method.The results from scanning electron microscopy and micro-Raman spectroscopy reveal that the ...SiGe spheres with different diameters are successfully fabricated on a virtual SiGe template using a laser irradiation method.The results from scanning electron microscopy and micro-Raman spectroscopy reveal that the diameter and Ge composition of the SiGe spheres can be well controlled by adjusting the laser energy density.In addition,the transmission electron microscopy results show that Ge composition inside the SiGe spheres is almost uniform in a well-defined,nearly spherical outline.As a convenient method to prepare sphere-shaped SiGe micro/nanostructures with tunable Ge composition and size,this technique is expected to be useful for SiGe-based material growth and micro/optoelectronic device fabrication.展开更多
Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics device...Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics devices and even for biomedical purposes.In the past decade,laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction,including the laser processing-induced carbon and non-carbon nanomaterials,hierarchical structure construction,patterning,heteroatom doping,sputtering etching,and so on.The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices,such as light–thermal conversion,batteries,supercapacitors,sensor devices,actuators and electrocatalytic electrodes.Here,the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized.An extensive overview on laser-enabled electronic devices for various applications is depicted.With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies,laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.展开更多
Versatile liquid manipulating surfaces combining patternable and controllable wettability have recently motivated considerable attention owing to their significant advantages in droplet-solid impacting behaviors,micro...Versatile liquid manipulating surfaces combining patternable and controllable wettability have recently motivated considerable attention owing to their significant advantages in droplet-solid impacting behaviors,microdroplet self-removal,and liquid–liquid interface reaction applications.However,developing a facile and efficient method to fabricate these versatile surfaces remains an enormous challenge.In this paper,a strategy for the fabrication of liquid manipulating surfaces with patternable and controllable wettability on Polyimide(PI)film based on femtosecond laser thermal accumulation engineering is proposed.Because of its controllable micro-/nanostructures and chemical composition through adjusting the local thermal accumulation,the wettability of PI film can be tuned from superhydrophilicity(~3.6°)to superhydrophobicity(~151.6°).Furthermore,three diverse surfaces with patternable and heterogeneous wettability were constructed and various applications were successfully realized,including water transport,droplet arrays,and liquid wells.This work may provide a facile strategy for achieving patternable and controllable wettability efficiently and developing multifunctional liquid steering surfaces.展开更多
The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophob...The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophobic materials.The simple and easy preparation method has become the focus for superhydrophobic materials.In this paper,we present a program for preparing a rough surface on an aluminum foil,which possesses excellent hydrophobic properties after the treatment with low surface energy materials at high vacuum.The resulting contact angle is larger than 160° and the droplet cannot freeze on the surface above-10 ℃.Meanwhile,the modified aluminum foil with the thickness of less than 100 μm can be used as an ideal flexible applied material for superhydrophobicity/anti-icing.展开更多
Metal-based core-shell nanostructures have garnered enduring interest due to their unique properties and functionalities.However,their growth and transformation mechanisms in liquid media remain largely unknown becaus...Metal-based core-shell nanostructures have garnered enduring interest due to their unique properties and functionalities.However,their growth and transformation mechanisms in liquid media remain largely unknown because they lack direct observation of the dynamic growth process with high spatial and temporal resolution.Developing the in situ liquid cell transmission electron microscopy(TEM)technique offers unprecedented real-time imaging and spectroscopy capabilities to directly track the evolution of structural and chemical transformation of metal-based core–shell nanostructures in liquid media under their working condition.Here,this review highlights recent progress in utilizing in situ liquid cell TEM characterization technique in investigating the dynamic evolution of material structure and morphology of metal-based core–shell nanostructures at the nano/atomic scale in real-time.A brief introduction of the development of liquid cells for in situ TEM is first given.Subsequently,recent advances in in situ liquid cell TEM for the fundamental study of growth mechanisms of metal based core–shell nanostructures are discussed.Finally,the challenge and future developments of metalbased core–shell nanostructures for in situ liquid cell TEM are proposed.Our review is anticipated to inspire ongoing interest in revealing unseen growth dynamics of core–shell nanostructures by in situ liquid cell TEM technique.展开更多
Electrochemical logical operations utilizing biological molecules(protein or DNA), which can be used in disease diagnostics and bio-computing, have attracted great research interest. However, the existing logic operat...Electrochemical logical operations utilizing biological molecules(protein or DNA), which can be used in disease diagnostics and bio-computing, have attracted great research interest. However, the existing logic operations, being realized on macroscopic electrode, are not suitable for implantable logic devices. Here, we demonstrate DNA-based logic gates with electrochemical signal as output combined with gold flower microelectrodes. The designed logic gates are of fast response, enzyme-free, and micrometer scale. They perform well in either pure solution or complex matrices, such as fetal bovine serum,suggesting great potential for in vivo applications.展开更多
Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by t...Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by the simple variation of applied voltage from 2-6 V between the electrodes. Lead sheet was used as an anode and platinum sheet served as a cathode. Anodic oxidation at 2 V resulted in the variable edge sized（1-2 μm） hexagon-like structures in the electrolyte. When the applied potential was increased to 4 V a structure of distorted hexagons consisting of some flower-like structures were obtained. Further increment of potential up to 6 V resulted in flower like structures of α-PbO2 having six petals. The diameter of the flower-like structures was 200-500 nm and the size of a petal was 100-200 nm.展开更多
We report direct nanoscale imaging of ultrafast plasmon in a gold dolmen nanostructure excited with the 7is laser pulses by combining the interferometric time-resolved technology with the three-photon photoemission el...We report direct nanoscale imaging of ultrafast plasmon in a gold dolmen nanostructure excited with the 7is laser pulses by combining the interferometric time-resolved technology with the three-photon photoemission electron microscopy （PEEM）. The interferometric time-resolved traces show that the plasmon mode beating pattern appears at the ends of the dimer slabs in the dolmen nanostructure as a result of coherent superposition of multiple localized surface plasmon modes induced by broad bandwidth of the ultrafast laser pulses. The PEEM measurement further discloses that in-phase of the oscillation field of two neighbor defects are surprisingly observed, which is attributed to the plasmon coupling between them. Furthermore, the control of the temporal delay between the pump and probe laser pluses could be utilized for manipulation of the near-field distribution. These findings deepen our understanding of ultrafast plasmon dynamics in a complex nanosystem.展开更多
Cathodoluminescence （CL） as a radiative light produced by an electron beam exciting a luminescent material, has beenwidely used in imaging and spectroscopic detection of semiconductor, mineral and biological samples...Cathodoluminescence （CL） as a radiative light produced by an electron beam exciting a luminescent material, has beenwidely used in imaging and spectroscopic detection of semiconductor, mineral and biological samples with an ultrahigh spatial resolution. Conventional CL spectroscopy shows an excellent performance in characterization of traditional mate-rial luminescence, such as spatial composition variations and fluorescent displays. With the development of nanotech-nology, advances of modern microscopy enable CL technique to obtain deep valuable insight of the testing sample, and further extend its applications in the material science, especially for opto-electronic investigations at nanoscale. In this article, we review the study of CL microscopy applied in semiconductor nanostructures for the dislocation, carrier diffu-sion, band structure, doping level and exciton recombination. Then advantages of CL in revealing and manipulating sur-face plasmon resonances of metallic nanoantennas are discussed. Finally, the challenge of CL technology is summa-rized, and potential CL applications for the future opto-electronic study are proposed.展开更多
This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman s...This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman spectroscopy and scanning electron microscopy(SEM).XRD and Raman studies confirm the monophasic hexagonal system of Mg:PbI2,and no additional impurity peaks are detected.The Scherrer formula is used to determine sizes of crystallites to be in the range of 47-52 nm.EDX/SEM e-mapping analyses confirm the incorporation of Mg in PbI2 matrix and its uniform distribution throughout the sample.The hexagonal nanosheet-and nanoplate-like morphologies are detected in SEM images for pure and Mg-doped PbI2.An optical band gap of nanostructures is obtained from Tauc’s relation to be in the range 3.0-3.25 eV.Dielectric and electrical properties are found in significant enhancement as Mg doping in PbI2 matrix,also the conduction mechanism is discussed.展开更多
We report the direct imaging of plasmon on the tips pulses and probing of ultrafast plasmon dynamics by of nano-prisms in a bowtie structure excited by 7 fs laser combining the pump-probe technology with three-photon ...We report the direct imaging of plasmon on the tips pulses and probing of ultrafast plasmon dynamics by of nano-prisms in a bowtie structure excited by 7 fs laser combining the pump-probe technology with three-photon photoemission electron microscopy. Different photoemission patterns induced by the plasmon effect are observed when the bowties are excited by s- and p-polarized femtosecond laser pulses. A series of images of the evolution of local surface plasmon modes on different tips of the bowtie are obtained by the time-resolved three-photon photoemission electron microscopy, and the result discloses that plasmon excitation is dominated by the interfer- ence of the pump and probe pulses within the first 13 fs of the delay time, and thereafter the individual plasmon starts to oscillate on its own characteristic resonant frequencies.展开更多
The microstructure and magnetic properties of Fe_(40)Co_(40)Zr_(9)B_(10)Ge_(1)(Mo-free)and Fe_(40)Co_(40)Zr_(5)Mo_(4)B_(10)Ge_(1)(Mocontaining)nanocrystalline alloys,prepared using an amorphous crystallization method,...The microstructure and magnetic properties of Fe_(40)Co_(40)Zr_(9)B_(10)Ge_(1)(Mo-free)and Fe_(40)Co_(40)Zr_(5)Mo_(4)B_(10)Ge_(1)(Mocontaining)nanocrystalline alloys,prepared using an amorphous crystallization method,were investigated.Mo addition affects the crystallization of the Fe_(40)Co_(40)Zr_(9)B_(10)Ge_(1) amorphous alloy and decreases the grain size of theα-Fe(Co)phase below 650℃.For the Mo-free alloy annealed at 600℃ and the Mo-containing alloy annealed at 575℃,with a singleα-Fe(Co)crystallization phase and approximately similar crystallization volume fractions,the Mo-containing alloy showed smaller,more regularly shaped grains and a significantly narrower grain-size distribution than the Mo-free alloy.The Fe and Co contents in the nanograins of the two alloys also differed.For the Mo-free alloy,a higher concentration of Co distributed in the residual amorphous matrix.For the Mo-containing alloy,a higher concentration Co dissolved in the nanograins.The specific saturation magnetization and coercivity of the Mo-free alloy were 1.05-and 1.59-times higher than those of the Mo-containing alloy,respectively.展开更多
TC6 titanium alloy samples are processed by laser shock peening （LSP）. Then, some samples are vacu- um annealed at 623 K for 10 h for the study on the thermost.ablity of the nanostructure produced by LSP. The charac...TC6 titanium alloy samples are processed by laser shock peening （LSP）. Then, some samples are vacu- um annealed at 623 K for 10 h for the study on the thermost.ablity of the nanostructure produced by LSP. The characteristics of the strengthened layer and nanostructure are studied by atomic force microscopy（AFM）, scan- ning electron microscope （SEM）, electron backscatter diffraction（EBSD）, X-ray diffraction（XRD）, and transmis- sion electron microscopy（TEM） appliances, meanwhile the enhanced microhardness is tested at cross section. AFM of the processed surface indicates that the deformation is approximately uniform, and LSP slightly increases the roughness. SEM and EBSD of the strengthened cross section show that a phases are compressed to strip- shaped, a proportion of a and ~ phases is shattered to smaller phases from surface to 200 ttm in depth. The sur- face XRD shows that although there is no new produced phase during LSP, the grain size refinement and the in- troduction of lattice micro-strains lead to the broadened peak. The TEM photographs and diffraction patterns in- dicate that the shock wave provides high strain rate deformation and leads to the formation of nanocrystal. Com- pared with the samples before annealing, the dislocation density is lower and the grain-boundary is more distinct in the annealed samples, but the nanocrystal size does not grow bigger after annealing. The microhardness measurement indicates that LSP improves the microhardness of TC6 for about 12.2% on the surface, and the layer affected by LSP is about 500/~m in depth. The microhardness after annealing is 10 HVo.5 lower, but the affected depth does not change. The thermostable study shows that the strengthened layer of TC6 processed by LSP is stable at 623 K. The strengthened thermostable layer can significantly improve the fatigue resistance, wear resis- tance and stress corrosion resistance of the titanium alloy. The study results break the USA standard AMS2546 that titanium parts after LSP are subjected in subsequent processing within 589 K.展开更多
The roots of 200 one-year-old Changbai Larch (Larix olgensis) seedlings were soaked for 6 hours at the TMS concentrations of 2000, 1000, 500, 250, 125, and 62 μL·L?1. Mean seedling height, root collar diameter, ...The roots of 200 one-year-old Changbai Larch (Larix olgensis) seedlings were soaked for 6 hours at the TMS concentrations of 2000, 1000, 500, 250, 125, and 62 μL·L?1. Mean seedling height, root collar diameter, main root length and number of lateral roots were measured every 15 days during growing season from May 30 to Oct. 20. Experimental results showed that TMS treatments greatly promoted seedling growth and improved seedling quality. The treatment by 500 μL·L?1 TMS produced the best result, for which the mean height, root collar diameter, main root length, and the number of lateral roots of seedlings were increased by 42.5%, 30.7%, 14.0%, and 31.6%, respectively, compared to that of the control seedlings. As to seedling quality, grade-I seedling and grade-II seedlings were fifty-fifty, and no grade-III seedlings was found. The treatment by 500 μL·L?1 TMS resulted in the highest chlorophyll concentration. Keywords Changbai Larch - Larix olgensis - Seedling production - Nanostructured silicon dioxide CLC number S143.8 Document code B Foundation item: This study is supported by Jilin Forestry Group Co.Biography: LIN Baoshan (1955-), male, Associate professor at the college of forestry, Beihua University, Jilin City 132011, Jilin Province, P.R China.Responsible editor: Chai Ruihai.展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. 21601098 and 51602167)Shandong Provincial Science Foundation (ZR2016EMB07 and ZR2017JL021)+1 种基金Key Research and Development Program (2018GGX102033)Qingdao Applied Fundamental Research Project (16-5-1-92-jch and 17-1-1-81-jch)
文摘A strong interface coupling is of vital importance to develop metal oxide/carbon nanocomposite anodes for next-generation lithium ion batteries.Herein,a rational N-doped carb on riveting strategy is designed to boost the lithium storage performance of Fe3O4/N-doped carbon tubular structures.Poly pyrrole(PPy)has been used as the precursor for N-doped carbon.N-doped carbon-riveted Fe3O4/N-doped carbon(N-C@Fe3O4@N-C)nanocomposites were obtained by pyrolysis of PPy-coated FeOOH@PPy nanotubes in Ar atmosphere.When tested as an anode for LIBs,the N-C@Fe3O4@N-C displays a high reversible discharge capacity of 675.8 mA h g-1 after 100 cycles at a current density of 100 mA g-1 and very good rate capability(470 mA h g_1 at 2 A g-1),which significantly surpasses the performance of Fe3O4@N-C.TEM analysis reveals that after battery cycling the FeOx particles detached from the carbon fibers for Fe3O4@N-C,while for N-C@Fe3O4@N-C the FeOx particles were still trapped in the carbon matrix,thus preserving good electrical contact.Consequently,the superior performance of N-C@Fe3C)4@N-C is attributed to the synergistic effect between Fe3O4 and N-doped carbon combined with the unique structure properties of the nanocomposites.The strategy reported in this work is expected to be applicable for designing other electrode materials for LIBs.
文摘Nanotechnology allows the realization of new materials and devices with basic structural unit in the range of1–100 nm and characterized by gaining control at the atomic, molecular, and supramolecular level. Reducing the dimensions of a material into the nanoscale range usually results in the change of its physiochemical properties such as reactivity,crystallinity, and solubility. This review treats the convergence of last research news at the interface of nanostructured biomaterials and tissue engineering for emerging biomedical technologies such as scaffolding and tissue regeneration. The present review is organized into three main sections. The introduction concerns an overview of the increasing utility of nanostructured materials in the field of tissue engineering. It elucidates how nanotechnology, by working in the submicron length scale, assures the realization of a biocompatible interface that is able to reproduce the physiological cell–matrix interaction. The second, more technical section, concerns the design and fabrication of biocompatible surface characterized by micro- and submicroscale features, using microfabrication, nanolithography, and miscellaneous nanolithographic techniques.In the last part, we review the ongoing tissue engineering application of nanostructured materials and scaffolds in different fields such as neurology, cardiology, orthopedics, and skin tissue regeneration.
基金supported by the Program for the Science and Technology Commission of Shanghai Municipality (No. 0952nm02500)
文摘A simple hydrothermal route has been developed for the fabricating Zn O hierarchical micro/nanostructure with excellent reproducibility. SEM and TEM analysis show that the hierarchical rod is a single-crystal, suggesting that many single-crystal micro/nanorods are assembled into Zn O hierarchical micro/nanostructures. The morphologies of the hierarchical rods can be conveniently tailored by changing the reaction parameters. And we also found citric acid plays a crucial role in the formation process of Zn O micro/nanostructures. Room-temperature photoluminescence spectra reveals that the Zn O hierarchical micro/nanostructures have a strong emission peak at 440 nm and several weak emission peaks at 420, 471 and541 nm, respectively.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.62004218,61991441,and 61804176)the Strategic Priority Research Program of Chinese Academy of Sciences(Grant No.XDB01000000)the Youth Innovation Promotion Association of Chinese Academy of Sciences(Grant No.2021005).
文摘SiGe spheres with different diameters are successfully fabricated on a virtual SiGe template using a laser irradiation method.The results from scanning electron microscopy and micro-Raman spectroscopy reveal that the diameter and Ge composition of the SiGe spheres can be well controlled by adjusting the laser energy density.In addition,the transmission electron microscopy results show that Ge composition inside the SiGe spheres is almost uniform in a well-defined,nearly spherical outline.As a convenient method to prepare sphere-shaped SiGe micro/nanostructures with tunable Ge composition and size,this technique is expected to be useful for SiGe-based material growth and micro/optoelectronic device fabrication.
基金This work was supported by Taishan Scholars Project Special Funds(tsqn201812083)Natural Science Foundation of Shandong Province(ZR2019YQ20,2019JMRH0410,ZR2019BB001)the National Natural Science Foundation of China(51972147,51902132,52022037).
文摘Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications,including energy conversion and storage,nanoscale electronics,sensors and actuators,photonics devices and even for biomedical purposes.In the past decade,laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction,including the laser processing-induced carbon and non-carbon nanomaterials,hierarchical structure construction,patterning,heteroatom doping,sputtering etching,and so on.The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices,such as light–thermal conversion,batteries,supercapacitors,sensor devices,actuators and electrocatalytic electrodes.Here,the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized.An extensive overview on laser-enabled electronic devices for various applications is depicted.With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies,laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.
基金This research is supported by National Natural Science Foundation of China(Nos.52075557,51805553)Natural Science Foundation of Hunan Province(No.2021JJ20067)+1 种基金The Science and Technology Innovation Program of Hunan Province(No.2021RC3011)Open access funding provided by Shanghai Jiao Tong University
文摘Versatile liquid manipulating surfaces combining patternable and controllable wettability have recently motivated considerable attention owing to their significant advantages in droplet-solid impacting behaviors,microdroplet self-removal,and liquid–liquid interface reaction applications.However,developing a facile and efficient method to fabricate these versatile surfaces remains an enormous challenge.In this paper,a strategy for the fabrication of liquid manipulating surfaces with patternable and controllable wettability on Polyimide(PI)film based on femtosecond laser thermal accumulation engineering is proposed.Because of its controllable micro-/nanostructures and chemical composition through adjusting the local thermal accumulation,the wettability of PI film can be tuned from superhydrophilicity(~3.6°)to superhydrophobicity(~151.6°).Furthermore,three diverse surfaces with patternable and heterogeneous wettability were constructed and various applications were successfully realized,including water transport,droplet arrays,and liquid wells.This work may provide a facile strategy for achieving patternable and controllable wettability efficiently and developing multifunctional liquid steering surfaces.
基金Project supported by China Postdoctoral Science Foundation(Grant No.2016M590137)the National Natural Science Foundation of China(Grant No.21476246)+2 种基金the Youth Innovation Promotion Association of the Chinese Academy of Sciences(Grant No.2016047)the KIST Institutional Program(Grant No.2E26291)Research Grants of NRF funded by the National Research Foundation under the Ministry of Science,ICT & Future,Korea(Grant No.NRF-2015H1D3A1036078)
文摘The research of superhydrophobic materials has attracted many researchers＇ attention due to its application value and prospects.In order to expand the serviceable range,people have investigated various superhydrophobic materials.The simple and easy preparation method has become the focus for superhydrophobic materials.In this paper,we present a program for preparing a rough surface on an aluminum foil,which possesses excellent hydrophobic properties after the treatment with low surface energy materials at high vacuum.The resulting contact angle is larger than 160° and the droplet cannot freeze on the surface above-10 ℃.Meanwhile,the modified aluminum foil with the thickness of less than 100 μm can be used as an ideal flexible applied material for superhydrophobicity/anti-icing.
基金financially supported by the National Natural Science Foundation of China(22001083,52072323,52122211)the“Double-First Class”Foundation of Materials and Intelligent Manufacturing Discipline of Xiamen University。
文摘Metal-based core-shell nanostructures have garnered enduring interest due to their unique properties and functionalities.However,their growth and transformation mechanisms in liquid media remain largely unknown because they lack direct observation of the dynamic growth process with high spatial and temporal resolution.Developing the in situ liquid cell transmission electron microscopy(TEM)technique offers unprecedented real-time imaging and spectroscopy capabilities to directly track the evolution of structural and chemical transformation of metal-based core–shell nanostructures in liquid media under their working condition.Here,this review highlights recent progress in utilizing in situ liquid cell TEM characterization technique in investigating the dynamic evolution of material structure and morphology of metal-based core–shell nanostructures at the nano/atomic scale in real-time.A brief introduction of the development of liquid cells for in situ TEM is first given.Subsequently,recent advances in in situ liquid cell TEM for the fundamental study of growth mechanisms of metal based core–shell nanostructures are discussed.Finally,the challenge and future developments of metalbased core–shell nanostructures for in situ liquid cell TEM are proposed.Our review is anticipated to inspire ongoing interest in revealing unseen growth dynamics of core–shell nanostructures by in situ liquid cell TEM technique.
基金supported by the National Natural Science Foundation of China(Nos.31470960 and 21422508)
文摘Electrochemical logical operations utilizing biological molecules(protein or DNA), which can be used in disease diagnostics and bio-computing, have attracted great research interest. However, the existing logic operations, being realized on macroscopic electrode, are not suitable for implantable logic devices. Here, we demonstrate DNA-based logic gates with electrochemical signal as output combined with gold flower microelectrodes. The designed logic gates are of fast response, enzyme-free, and micrometer scale. They perform well in either pure solution or complex matrices, such as fetal bovine serum,suggesting great potential for in vivo applications.
基金financial support from USACH-Chile, Council of Scientific and Industrial Research (CSIR) and University Grant Commission (UGC) New Delhi, India
文摘Micron sized hexagon- and flower-like nanostructures of lead oxide（α-PbO2） have been synthesized by very simple and cost effective route of anodic oxidation of lead sheet. These structures were easily obtained by the simple variation of applied voltage from 2-6 V between the electrodes. Lead sheet was used as an anode and platinum sheet served as a cathode. Anodic oxidation at 2 V resulted in the variable edge sized（1-2 μm） hexagon-like structures in the electrolyte. When the applied potential was increased to 4 V a structure of distorted hexagons consisting of some flower-like structures were obtained. Further increment of potential up to 6 V resulted in flower like structures of α-PbO2 having six petals. The diameter of the flower-like structures was 200-500 nm and the size of a petal was 100-200 nm.
基金Supported by the National Basic Research Program of China under Grant No 2013CB922404the National Natural Science Foundation of China under Grant Nos 11474040,11474039,61605017 and 61575030the Project of Changchun Science and Technology Bureau under Grant No 14KP007
文摘We report direct nanoscale imaging of ultrafast plasmon in a gold dolmen nanostructure excited with the 7is laser pulses by combining the interferometric time-resolved technology with the three-photon photoemission electron microscopy （PEEM）. The interferometric time-resolved traces show that the plasmon mode beating pattern appears at the ends of the dimer slabs in the dolmen nanostructure as a result of coherent superposition of multiple localized surface plasmon modes induced by broad bandwidth of the ultrafast laser pulses. The PEEM measurement further discloses that in-phase of the oscillation field of two neighbor defects are surprisingly observed, which is attributed to the plasmon coupling between them. Furthermore, the control of the temporal delay between the pump and probe laser pluses could be utilized for manipulation of the near-field distribution. These findings deepen our understanding of ultrafast plasmon dynamics in a complex nanosystem.
文摘Cathodoluminescence （CL） as a radiative light produced by an electron beam exciting a luminescent material, has beenwidely used in imaging and spectroscopic detection of semiconductor, mineral and biological samples with an ultrahigh spatial resolution. Conventional CL spectroscopy shows an excellent performance in characterization of traditional mate-rial luminescence, such as spatial composition variations and fluorescent displays. With the development of nanotech-nology, advances of modern microscopy enable CL technique to obtain deep valuable insight of the testing sample, and further extend its applications in the material science, especially for opto-electronic investigations at nanoscale. In this article, we review the study of CL microscopy applied in semiconductor nanostructures for the dislocation, carrier diffu-sion, band structure, doping level and exciton recombination. Then advantages of CL in revealing and manipulating sur-face plasmon resonances of metallic nanoantennas are discussed. Finally, the challenge of CL technology is summa-rized, and potential CL applications for the future opto-electronic study are proposed.
基金Project supported by the Deanship of Scientific Research at King Khalid University(Grant No.R.G.P1/207/41)the Deanship of Scientific Research at Princess Nourah bint Abdulrahman University through the Fast-track Research Funding Program,and Deanship of Research,University of Hail.
文摘This work reports the cost-effective growth of Mg:PbI2 nanostructures with 0,1,2.5 and 5.0 wt.%Mg doping concentrations.Structural,vibrational,morphological properties are analyzed using x-ray diffraction(XRD),Raman spectroscopy and scanning electron microscopy(SEM).XRD and Raman studies confirm the monophasic hexagonal system of Mg:PbI2,and no additional impurity peaks are detected.The Scherrer formula is used to determine sizes of crystallites to be in the range of 47-52 nm.EDX/SEM e-mapping analyses confirm the incorporation of Mg in PbI2 matrix and its uniform distribution throughout the sample.The hexagonal nanosheet-and nanoplate-like morphologies are detected in SEM images for pure and Mg-doped PbI2.An optical band gap of nanostructures is obtained from Tauc’s relation to be in the range 3.0-3.25 eV.Dielectric and electrical properties are found in significant enhancement as Mg doping in PbI2 matrix,also the conduction mechanism is discussed.
基金Supported by the National Basic Research Program of China under Grant No 2013CB922404the National Natural Science Foundation of China under Grant Nos 11474040 11274053,11474039 and 61178022the Project under Grant No 14KP007
文摘We report the direct imaging of plasmon on the tips pulses and probing of ultrafast plasmon dynamics by of nano-prisms in a bowtie structure excited by 7 fs laser combining the pump-probe technology with three-photon photoemission electron microscopy. Different photoemission patterns induced by the plasmon effect are observed when the bowties are excited by s- and p-polarized femtosecond laser pulses. A series of images of the evolution of local surface plasmon modes on different tips of the bowtie are obtained by the time-resolved three-photon photoemission electron microscopy, and the result discloses that plasmon excitation is dominated by the interfer- ence of the pump and probe pulses within the first 13 fs of the delay time, and thereafter the individual plasmon starts to oscillate on its own characteristic resonant frequencies.
基金Project supported by the Natural Science Foundation of Jilin Province,China(Grant No.YDZJ202201ZYTS319)the Fund from Sinoma Institute of Materials Research(Guangzhou)Co.,Ltd.(SIMR)for assisting with the TEM characterization。
文摘The microstructure and magnetic properties of Fe_(40)Co_(40)Zr_(9)B_(10)Ge_(1)(Mo-free)and Fe_(40)Co_(40)Zr_(5)Mo_(4)B_(10)Ge_(1)(Mocontaining)nanocrystalline alloys,prepared using an amorphous crystallization method,were investigated.Mo addition affects the crystallization of the Fe_(40)Co_(40)Zr_(9)B_(10)Ge_(1) amorphous alloy and decreases the grain size of theα-Fe(Co)phase below 650℃.For the Mo-free alloy annealed at 600℃ and the Mo-containing alloy annealed at 575℃,with a singleα-Fe(Co)crystallization phase and approximately similar crystallization volume fractions,the Mo-containing alloy showed smaller,more regularly shaped grains and a significantly narrower grain-size distribution than the Mo-free alloy.The Fe and Co contents in the nanograins of the two alloys also differed.For the Mo-free alloy,a higher concentration of Co distributed in the residual amorphous matrix.For the Mo-containing alloy,a higher concentration Co dissolved in the nanograins.The specific saturation magnetization and coercivity of the Mo-free alloy were 1.05-and 1.59-times higher than those of the Mo-containing alloy,respectively.
文摘TC6 titanium alloy samples are processed by laser shock peening （LSP）. Then, some samples are vacu- um annealed at 623 K for 10 h for the study on the thermost.ablity of the nanostructure produced by LSP. The characteristics of the strengthened layer and nanostructure are studied by atomic force microscopy（AFM）, scan- ning electron microscope （SEM）, electron backscatter diffraction（EBSD）, X-ray diffraction（XRD）, and transmis- sion electron microscopy（TEM） appliances, meanwhile the enhanced microhardness is tested at cross section. AFM of the processed surface indicates that the deformation is approximately uniform, and LSP slightly increases the roughness. SEM and EBSD of the strengthened cross section show that a phases are compressed to strip- shaped, a proportion of a and ~ phases is shattered to smaller phases from surface to 200 ttm in depth. The sur- face XRD shows that although there is no new produced phase during LSP, the grain size refinement and the in- troduction of lattice micro-strains lead to the broadened peak. The TEM photographs and diffraction patterns in- dicate that the shock wave provides high strain rate deformation and leads to the formation of nanocrystal. Com- pared with the samples before annealing, the dislocation density is lower and the grain-boundary is more distinct in the annealed samples, but the nanocrystal size does not grow bigger after annealing. The microhardness measurement indicates that LSP improves the microhardness of TC6 for about 12.2% on the surface, and the layer affected by LSP is about 500/~m in depth. The microhardness after annealing is 10 HVo.5 lower, but the affected depth does not change. The thermostable study shows that the strengthened layer of TC6 processed by LSP is stable at 623 K. The strengthened thermostable layer can significantly improve the fatigue resistance, wear resis- tance and stress corrosion resistance of the titanium alloy. The study results break the USA standard AMS2546 that titanium parts after LSP are subjected in subsequent processing within 589 K.
基金This study is supported by Jilin Forestry Group Co.
文摘The roots of 200 one-year-old Changbai Larch (Larix olgensis) seedlings were soaked for 6 hours at the TMS concentrations of 2000, 1000, 500, 250, 125, and 62 μL·L?1. Mean seedling height, root collar diameter, main root length and number of lateral roots were measured every 15 days during growing season from May 30 to Oct. 20. Experimental results showed that TMS treatments greatly promoted seedling growth and improved seedling quality. The treatment by 500 μL·L?1 TMS produced the best result, for which the mean height, root collar diameter, main root length, and the number of lateral roots of seedlings were increased by 42.5%, 30.7%, 14.0%, and 31.6%, respectively, compared to that of the control seedlings. As to seedling quality, grade-I seedling and grade-II seedlings were fifty-fifty, and no grade-III seedlings was found. The treatment by 500 μL·L?1 TMS resulted in the highest chlorophyll concentration. Keywords Changbai Larch - Larix olgensis - Seedling production - Nanostructured silicon dioxide CLC number S143.8 Document code B Foundation item: This study is supported by Jilin Forestry Group Co.Biography: LIN Baoshan (1955-), male, Associate professor at the college of forestry, Beihua University, Jilin City 132011, Jilin Province, P.R China.Responsible editor: Chai Ruihai.
