The remarkable properties of carbon nanotubes(CNTs)have led to promising applications in the field of electromagnetic inter-ference(EMI)shielding.However,for macroscopic CNT assemblies,such as CNT film,achieving high ...The remarkable properties of carbon nanotubes(CNTs)have led to promising applications in the field of electromagnetic inter-ference(EMI)shielding.However,for macroscopic CNT assemblies,such as CNT film,achieving high electrical and mechanical properties remains challenging,which heavily depends on the tube-tube interac-tions of CNTs.Herein,we develop a novel strategy based on metal-organic decomposition(MOD)to fabricate a flexible silver-carbon nanotube(Ag-CNT)film.The Ag particles are introduced in situ into the CNT film through annealing of MOD,leading to enhanced tube-tube interactions.As a result,the electrical conductivity of Ag-CNT film is up to 6.82×10^(5) S m^(-1),and the EMI shielding effectiveness of Ag-CNT film with a thickness of~7.8μm exceeds 66 dB in the ultra-broad frequency range(3-40 GHz).The tensile strength and Young’s modulus of Ag-CNT film increase from 30.09±3.14 to 76.06±6.20 MPa(~253%)and from 1.12±0.33 to 8.90±0.97 GPa(~795%),respectively.Moreover,the Ag-CNT film exhibits excellent near-field shield-ing performance,which can effectively block wireless transmission.This innovative approach provides an effective route to further apply macroscopic CNT assemblies to future portable and wearable electronic devices.展开更多
Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass...Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass loadings crucial for practical use.The root of these challenges lies in the mechanical instability of the material,which subsequently leads to the structural failure of the electrode.Here,we present a novel synthesis of a composite combining expanded graphite and silicon nanoparticles.This composite features a unique interlayer-bonded graphite structure,achieved through the application of a modified spark plasma sintering method.Notably,this innovative structure not only facilitates efficient ion and electron transport but also provides exceptional mechanical strength(Vickers hardness:up to658 MPa,Young's modulus:11.6 GPa).This strength effectively accommodates silicon expansion,resulting in an impressive areal capacity of 2.9 mA h cm^(-2)(736 mA h g^(-1)) and a steady cycle life(93% after 100cycles).Such outsta nding performance is paired with features appropriate for large-scale industrial production of silicon batteries,such as active mass loading of at least 3.9 mg cm^(-2),a high-tap density electrode material of 1.68 g cm^(-3)(secondary clusters:1.12 g cm^(-3)),and a production yield of up to 1 kg per day.展开更多
To study the thermal decomposition of Al/Zr H_(2)/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates,molding-vacuum sintering was adopted to pr...To study the thermal decomposition of Al/Zr H_(2)/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates,molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size.The active decomposition temperature of Zr H_(2) was obtained by TG-DSC,and the quasi-static mechanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respectively by quasi-static compression and drop-hammer test.The results show that the yield strength of the material decreased with the increase of the Al particle size,while the compressive strength,failure strain and toughness increased first and then decreased,which reached the maximum values of 116.61 MPa,191%,and 119.9 MJ/m respectively when the Al particle size is 12-14 mm because of particle size grading.The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed.Those with developmental cracks formed inside did not react.It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat.Then ZrH_(2) was activated and decomposed,and participated in subsequent reaction to generate Zr C.The impact sensitivity of the specimens decreased with the increase of Al particle size.展开更多
Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capac...Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capacity(3860 m Ah/g)and the lowest electrochemical potential(-3.04 V vs.the standard hydrogen electrode)[3–6].However,issues of Li metal anode,such as Li dendrite formation and large volume change during plating/stripping。展开更多
Wood-based hydrogel with a unique anisotropic structure is an attractive soft material,but the presence of rigid crystalline cellulose in natural wood makes the hydrogel less flexible.In this study,an all-wood hydroge...Wood-based hydrogel with a unique anisotropic structure is an attractive soft material,but the presence of rigid crystalline cellulose in natural wood makes the hydrogel less flexible.In this study,an all-wood hydrogel was constructed by cross-linking cellulose fibers,polyvinyl alcohol(PVA)chains,and lignin molecules through the Hofmeister effect.The all-wood hydrogel shows a high tensile strength of 36.5 MPa and a strain up to~438%in the longitudinal direction,which is much higher than its tensile strength(~2.6 MPa)and strain(~198%)in the radial direction,respectively.The high mechanical strength of all-wood hydrogels is mainly attributed to the strong hydrogen bonding,physical entanglement,and van der Waals forces between lignin molecules,cellulose nanofibers,and PVA chains.Thanks to its excellent flexibility,good conductivity,and sensitivity,the all-wood hydrogel can accurately distinguish diverse macroscale or subtle human movements,including finger flexion,pulse,and swallowing behavior.In particular,when“An Qi”was called four times within 15 s,two variations of the pronunciation could be identified.With recyclable,biodegradable,and adjustable mechanical properties,the all-wood hydrogel is a multifunctional soft material with promising applications,such as human motion monitoring,tissue engineering,and robotics materials.展开更多
Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion condu...Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion conductance and poor mechanical and thermal properties.Herein,poly(m-phenylene isophthalamide)(PMIA)is employed as a multifunctional additive to improve the overall properties of the PEO-based electrolytes.The hydrogen-bond interactions between PMIA and PEO/TFSI-can effectively prevent the PEO crystallization and meanwhile facilitate the LiTFSI dissociation,and thus greatly improve the ionic conductivity(two times that of the pristine electrolyte at room temperature).With the incorporation of the high-strength PMIA with tough amide-benzene backbones,the PMIA/PEO-LiTFSI composite polymer electrolyte(CPE)membranes also show much higher mechanical strength(2.96 MPa),thermostability(4190℃)and interfacial stability against Li dendrites(468 h at 0.10 mA cm-2)than the pristine electrolyte(0.32 MPa,364℃and short circuit after 246 h).Furthermore,the CPE-based LiFePO4/Li cells exhibit superior cycling stability(137 mAh g^-1 with 93%retention after 100 cycles at 0.5 C)and rate performance(123 mAh g^-1 at 1.0 C).This work provides a novel and effective CPE structure design strategy to achieve comprehensively-upgraded electrolytes for promising solid-state battery applications.展开更多
A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shea...A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shear failure criterion to describe the anisotropy and using the shear strength reduction caused by clay minerals hydration to evaluate the hydration.This failure criterion is defined with four parameters in Jaeger’s shear failure criterion(S_(1),S_(2),a andφ),three hydration parameters(k,ω_(sh)andσ_(s))and two material size parameters(d and l0).The physical meanings and determining procedures of these parameters are described.The accuracy and applicability of this failure criterion are examined using the published experimental data,showing a cohesive agreement between the predicted values and the testing results,R^(2)=0.916 and AAREP(average absolute relative error percentage)of 9.260%.The error(|D_(p)|)is then discussed considering the effects ofβ(angle between bedding plane versus axial loading),moisture content and confining pressure,presenting that|Dp|increases whenβis closer to 30°,and|D_(p)|decreases with decreasing moisture content and with increasing confining pressure.Moreover,|D_(p)|is demonstrated as being sensitive to S1and being steady with decrease in the data set whenβis 0°,30°,45°and 90°.展开更多
Shaped binderless ZSM-11 zeolite catalysts were synthesized via a dry-gel conversion technique from 70ZSM-11/30 SiO;mix extrudates. 1,6-hexanediamine combined with tetrabutylammonium bromide was proved to be the best ...Shaped binderless ZSM-11 zeolite catalysts were synthesized via a dry-gel conversion technique from 70ZSM-11/30 SiO;mix extrudates. 1,6-hexanediamine combined with tetrabutylammonium bromide was proved to be the best structure directing agent for the synthesis of the binderless ZSM-11 catalyst, without adding other alkaline materials. The 70HZSM-11/30 SiO;mix serials materials crystallized for different times were detected by X-ray diffraction（XRD）, nuclear magnetic resonance（NMR）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, scanning transmission electron microscopy–energy dispersive spectroscopy（STEM–EDS） techniques, and so on. In order to investigate the possible crystallization mechanism, the textural and structural properties of 70HZSM-11/30 SiO;mix serials samples were further characterized by N;adsorption–desorption. Acid properties were determined by temperature-programed desorption of NH;（NH;-TPD） and pyridine adsorption-infrared（Py-IR） measurements. In the alkylation of benzene with dimethyl ether, the serials catalysts exhibited different benzene conversions. 70HZSM-11/30 SiO;mix showed the lowest benzene conversion while sample 70HZSM-11/30 SiO;mix-6.5h synthesized only for 6.5h displayed a higher benzene conversion, even higher than the value over 70HZSM-11/30Al;O;mix. Extending the crystallization time, the obtained samples displayed the increased benzene conversion in general under the same reaction conditions. In the end, the relation of physicochemical properties with the reaction performance was investigated.展开更多
Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which per...Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which permits the implants to be locked into the alveolar bone over time. It also utilizes bioactive glass coatings to increase adhesion to surrounding bone structure. Samples of the new design were fabricated in the laboratory and their material strength, hardness, and fracture toughness were evaluated. In addition, biocompatibility of the new design was evaluated through testing in dogs. Results: Results of mechanical tests indicate that structural properties of the new design exceed the usual requirements for implants. Moreover, animal tests suggest that there is appreciable improvement in lock-in strength and osteointegration. Conclusion: The new design configuration is biomechanically feasible and further research is warranted to improve the design for human use.展开更多
Polyethylene oxide(PEO)-based electrolytes are considered as one of the most promising solid-state electrolytes for next-generation lithium batteries with high safety and energy density;however,the drawbacks such as i...Polyethylene oxide(PEO)-based electrolytes are considered as one of the most promising solid-state electrolytes for next-generation lithium batteries with high safety and energy density;however,the drawbacks such as insufficient ion conductance,mechanical strength and electrochemical stability hinder their applications in metallic lithium batteries.To enhance their overall properties,flexible and thin composite polymer electrolyte(CPE)membranes with 3D continuous aramid nanofiber(ANF)–Li_(1.4)Al_(0.4)Ti_(1.6)(PO_(4))_(3)(LATP)nanoparticle hybrid frameworks are facilely prepared by filling PEO–Li TFSI in the 3D nanohybrid scaffolds via a solution infusion way.The construction of the 3D continuous nanohybrid networks can effectively inhibit the PEO crystallization,facilitate the lithium salt dissociation and meanwhile increase the fast-ion transport in the continuous LATP electrolyte phase,and thus greatly improving the ionic conductivity(~3 times that of the pristine one).With the integration of the 3D continuity and flexibility of the 3D ANF networks and the thermostability of the LATP phase,the CPE membranes also show a wider electrochemical window(~5.0 V vs.4.3 V),higher tensile strength(~4–10times that of the pristine one)and thermostability,and better lithium dendrite resistance capability.Furthermore,the CPE-based Li FePO_(4)/Li cells exhibit superior cycling stability(133 m Ah/g after 100 cycles at 0.3 C)and rate performance(100 m Ah/g at 1 C)than the pristine electrolyte-based cell(79 and 29m Ah/g,respectively).This work offers an important CPE design criteria to achieve comprehensivelyupgraded solid-state electrolytes for safe and high-energy metal battery applications.展开更多
The effect of mechanical strength of the dispersed particle gel(DPG)on its macro plugging performance is significant,however,little study has been reported.In this paper,DPG particles with different mechanical strengt...The effect of mechanical strength of the dispersed particle gel(DPG)on its macro plugging performance is significant,however,little study has been reported.In this paper,DPG particles with different mechanical strengths were obtained by mechanical shearing of bulk gels prepared with different formula.Young’s moduli of DPG particles on the micro and nano scales were measured by atomic force microscope for the first time.The mapping relationship among the formula of bulk gel,the Young’s moduli of the DPG particles and the final plugging performance were established.The results showed that when the Young’s moduli of the DPG particles increased from 82 to 328 Pa,the plugging rate increased significantly from 91.46%to 97.10%due to the distinctly enhanced stacking density and strength at this range.While when the Young’s moduli of the DPG particles surpassed 328 Pa,the further increase of plugging rate with the Young’s moduli of the DPG particles became insignificant.These results indicated that the improvement of plugging rate was more efficient by adjusting the Young’s moduli of the DPG particles within certain ranges,providing guidance for improving the macroscopic application properties of DPG systems in reservoir heterogeneity regulation.展开更多
In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reducti...In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reduction method in a rock pillar for preventing water inrush based on catastrophic theory. Fluid–solid coupling effects and safety margins in a rock pillar were studied. Analysis shows that rock pillar instability, exerted by disturbance stress and seepage stress, is the process of rock pillar catastrophic destabilization induced by nonlinear extension of plastic zones in the rock pillar. Seepage flow emerges in the rock pillar for preventing water inrush, accompanied by mechanical instability of the rock pillar. Taking the accident of a confined karst cave water-inrush of Qiyi Mine as an example, by studying the safety factor of the rock pillar and the relationship between karst cave water pressure and thickness of the rock pillar,it is proposed that rock pillar thickness with a safety factor equal to 1.5 is regarded as the calculated safety thickness of the rock pillar, which should be equal to the sum of the blasthole depth, blasting disturbance depth and the calculated safety thickness of the rock pillar. The cause of the karst water inrush at Qiyi Mine is that the rock pillar was so small that it did not possess a safety margin. Combining fluid–solid coupling theory, catastrophic theory and strength reduction method to study the nonlinear mechanical response of complicated rock engineering, new avenues for quantitative analysis of rock engineering stability evaluation should be forthcoming.展开更多
This paper takes No.52 return uphill roadway of Yangquhe coal mine as a research project. Based on the research, especially its geological condition, indoor experiments, numerical simulation and theoretical analysis w...This paper takes No.52 return uphill roadway of Yangquhe coal mine as a research project. Based on the research, especially its geological condition, indoor experiments, numerical simulation and theoretical analysis were employed to determine the difficult coefficients of Yangquhe project. By using these means,the difficult coefficients of the deep rock engineering were determined. From a study of the effects of crustal stress and the roof mechanism on roadway stability, the transformation mechanism in Yangquhe coal mine has been determined. As a result of this research, the interactive support technology of prestressed cable mesh was developed and the technology tested in mining engineering, which proved to be feasible.展开更多
基金The authors gratefully acknowledge financial support from the National Natural Science Foundation of China(52103090)the Natural Science Foundation of Guangdong Province(2022A1515011780)Autonomous deployment project of China National Key Laboratory of Materials for Integrated Circuits(NKLJC-Z2023-B03).
文摘The remarkable properties of carbon nanotubes(CNTs)have led to promising applications in the field of electromagnetic inter-ference(EMI)shielding.However,for macroscopic CNT assemblies,such as CNT film,achieving high electrical and mechanical properties remains challenging,which heavily depends on the tube-tube interac-tions of CNTs.Herein,we develop a novel strategy based on metal-organic decomposition(MOD)to fabricate a flexible silver-carbon nanotube(Ag-CNT)film.The Ag particles are introduced in situ into the CNT film through annealing of MOD,leading to enhanced tube-tube interactions.As a result,the electrical conductivity of Ag-CNT film is up to 6.82×10^(5) S m^(-1),and the EMI shielding effectiveness of Ag-CNT film with a thickness of~7.8μm exceeds 66 dB in the ultra-broad frequency range(3-40 GHz).The tensile strength and Young’s modulus of Ag-CNT film increase from 30.09±3.14 to 76.06±6.20 MPa(~253%)and from 1.12±0.33 to 8.90±0.97 GPa(~795%),respectively.Moreover,the Ag-CNT film exhibits excellent near-field shield-ing performance,which can effectively block wireless transmission.This innovative approach provides an effective route to further apply macroscopic CNT assemblies to future portable and wearable electronic devices.
基金supported by the National Research Foundation, Prime Minister’s Office, Singapore, under its Competitive Research Programme (CRP award number NRF-CRP22-2019-008)Medium-Sized Centre Programme (CA2DM)+1 种基金the Ministry of Education of Singapore, under its Research Centre of Excellence award to the Institute for Functional Intelligent Materials (I-FIM, Project No. EDUNC-33-18-279-V12)by the EDB Singapore, under its Space Technology Development Programme (S2219013-STDP)。
文摘Despite advancements in silicon-based anodes for high-capacity lithium-ion batteries,their widespread commercial adoption is still hindered by significant volume expansion during cycling,especially at high active mass loadings crucial for practical use.The root of these challenges lies in the mechanical instability of the material,which subsequently leads to the structural failure of the electrode.Here,we present a novel synthesis of a composite combining expanded graphite and silicon nanoparticles.This composite features a unique interlayer-bonded graphite structure,achieved through the application of a modified spark plasma sintering method.Notably,this innovative structure not only facilitates efficient ion and electron transport but also provides exceptional mechanical strength(Vickers hardness:up to658 MPa,Young's modulus:11.6 GPa).This strength effectively accommodates silicon expansion,resulting in an impressive areal capacity of 2.9 mA h cm^(-2)(736 mA h g^(-1)) and a steady cycle life(93% after 100cycles).Such outsta nding performance is paired with features appropriate for large-scale industrial production of silicon batteries,such as active mass loading of at least 3.9 mg cm^(-2),a high-tap density electrode material of 1.68 g cm^(-3)(secondary clusters:1.12 g cm^(-3)),and a production yield of up to 1 kg per day.
基金financial support from the National Natural Science Foundation of China(General Program.Grant No.51673213)the National Natural Science Foundation of China(Youth Science Foundation.Grant No.51803235)。
文摘To study the thermal decomposition of Al/Zr H_(2)/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates,molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size.The active decomposition temperature of Zr H_(2) was obtained by TG-DSC,and the quasi-static mechanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respectively by quasi-static compression and drop-hammer test.The results show that the yield strength of the material decreased with the increase of the Al particle size,while the compressive strength,failure strain and toughness increased first and then decreased,which reached the maximum values of 116.61 MPa,191%,and 119.9 MJ/m respectively when the Al particle size is 12-14 mm because of particle size grading.The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed.Those with developmental cracks formed inside did not react.It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat.Then ZrH_(2) was activated and decomposed,and participated in subsequent reaction to generate Zr C.The impact sensitivity of the specimens decreased with the increase of Al particle size.
基金financial support by the National Natural Science Foundation of China(No.51802224)“Shanghai Rising-Star Program”(19QA1409300)Shanghai Aerospace Science and Technology Innovation Fundation(SISP2018)。
文摘Lithium-ion batteries(LIBs)have greatly facilitated our daily lives since 1990s[1,2].To meet the ever-increasing demand on energy density,Li metal is seen as the ultimate anode because of its ultra-high specific capacity(3860 m Ah/g)and the lowest electrochemical potential(-3.04 V vs.the standard hydrogen electrode)[3–6].However,issues of Li metal anode,such as Li dendrite formation and large volume change during plating/stripping。
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China,China(Nos.21978248,21676223)the Natural Science Foundation of Fujian Province of China(No.2019J06005)+1 种基金Guangdong Provincial Key Research and Development Program(No.2020B0101070001)Open access funding provided by Shanghai Jiao Tong University
文摘Wood-based hydrogel with a unique anisotropic structure is an attractive soft material,but the presence of rigid crystalline cellulose in natural wood makes the hydrogel less flexible.In this study,an all-wood hydrogel was constructed by cross-linking cellulose fibers,polyvinyl alcohol(PVA)chains,and lignin molecules through the Hofmeister effect.The all-wood hydrogel shows a high tensile strength of 36.5 MPa and a strain up to~438%in the longitudinal direction,which is much higher than its tensile strength(~2.6 MPa)and strain(~198%)in the radial direction,respectively.The high mechanical strength of all-wood hydrogels is mainly attributed to the strong hydrogen bonding,physical entanglement,and van der Waals forces between lignin molecules,cellulose nanofibers,and PVA chains.Thanks to its excellent flexibility,good conductivity,and sensitivity,the all-wood hydrogel can accurately distinguish diverse macroscale or subtle human movements,including finger flexion,pulse,and swallowing behavior.In particular,when“An Qi”was called four times within 15 s,two variations of the pronunciation could be identified.With recyclable,biodegradable,and adjustable mechanical properties,the all-wood hydrogel is a multifunctional soft material with promising applications,such as human motion monitoring,tissue engineering,and robotics materials.
基金supported partially by Natural Science Foundation of Beijing Municipality(L172036)Joint Funds of the Equipment Pre-Research and Ministry of Education(6141A020225)+3 种基金Par-Eu Scholars Program,Science and Technology Beijing 100 Leading Talent Training ProjectChina Postdoctoral Science Foundation(2018M631419)Fundamental Research Funds for Central Universities(2017ZZD02,2019QN001)NCEPU“Double First-Class”Graduate Talent Cultivation Program。
文摘Polyethylene oxide(PEO)-based electrolytes have obvious merits such as strong ability to dissolve salts(e.g.,LiTFSI)and high flexibility,but their applications in solid-state batteries is hindered by the low ion conductance and poor mechanical and thermal properties.Herein,poly(m-phenylene isophthalamide)(PMIA)is employed as a multifunctional additive to improve the overall properties of the PEO-based electrolytes.The hydrogen-bond interactions between PMIA and PEO/TFSI-can effectively prevent the PEO crystallization and meanwhile facilitate the LiTFSI dissociation,and thus greatly improve the ionic conductivity(two times that of the pristine electrolyte at room temperature).With the incorporation of the high-strength PMIA with tough amide-benzene backbones,the PMIA/PEO-LiTFSI composite polymer electrolyte(CPE)membranes also show much higher mechanical strength(2.96 MPa),thermostability(4190℃)and interfacial stability against Li dendrites(468 h at 0.10 mA cm-2)than the pristine electrolyte(0.32 MPa,364℃and short circuit after 246 h).Furthermore,the CPE-based LiFePO4/Li cells exhibit superior cycling stability(137 mAh g^-1 with 93%retention after 100 cycles at 0.5 C)and rate performance(123 mAh g^-1 at 1.0 C).This work provides a novel and effective CPE structure design strategy to achieve comprehensively-upgraded electrolytes for promising solid-state battery applications.
基金The financial supports from the Sichuan Science and Technology Program(No.2022NSFSC0185)the National Natural Science Foundation of China(Nos.42172313 and 51774246)+3 种基金the Natural Science Foundation of Chongqing(No.cstc2020jcyj-msxm X0570)the Fundamental Research Funds for the Central Universities(Nos.2020CDJ-LHZZ-004,2020CDJQY-A046)the State Key Laboratory of Coal Mine Disaster Dynamics and Control(No.2011DA105287-MS201903)The scholarship supports provided by the China Scholarship Council(CSC)。
文摘A failure criterion fully considering the anisotropy and hydration of shale is essential for shale formation stability evaluation.Thus,a novel failure criterion for hydration shale is developed by using Jaeger’s shear failure criterion to describe the anisotropy and using the shear strength reduction caused by clay minerals hydration to evaluate the hydration.This failure criterion is defined with four parameters in Jaeger’s shear failure criterion(S_(1),S_(2),a andφ),three hydration parameters(k,ω_(sh)andσ_(s))and two material size parameters(d and l0).The physical meanings and determining procedures of these parameters are described.The accuracy and applicability of this failure criterion are examined using the published experimental data,showing a cohesive agreement between the predicted values and the testing results,R^(2)=0.916 and AAREP(average absolute relative error percentage)of 9.260%.The error(|D_(p)|)is then discussed considering the effects ofβ(angle between bedding plane versus axial loading),moisture content and confining pressure,presenting that|Dp|increases whenβis closer to 30°,and|D_(p)|decreases with decreasing moisture content and with increasing confining pressure.Moreover,|D_(p)|is demonstrated as being sensitive to S1and being steady with decrease in the data set whenβis 0°,30°,45°and 90°.
基金supported by K.C.Wong Education FoundationDalian Eminent Young Scientist Program(2015R009)Natural Science Foundation of Heilongjiang Province(No.B2015006)
文摘Shaped binderless ZSM-11 zeolite catalysts were synthesized via a dry-gel conversion technique from 70ZSM-11/30 SiO;mix extrudates. 1,6-hexanediamine combined with tetrabutylammonium bromide was proved to be the best structure directing agent for the synthesis of the binderless ZSM-11 catalyst, without adding other alkaline materials. The 70HZSM-11/30 SiO;mix serials materials crystallized for different times were detected by X-ray diffraction（XRD）, nuclear magnetic resonance（NMR）, scanning electron microscopy（SEM）, transmission electron microscopy（TEM）, scanning transmission electron microscopy–energy dispersive spectroscopy（STEM–EDS） techniques, and so on. In order to investigate the possible crystallization mechanism, the textural and structural properties of 70HZSM-11/30 SiO;mix serials samples were further characterized by N;adsorption–desorption. Acid properties were determined by temperature-programed desorption of NH;（NH;-TPD） and pyridine adsorption-infrared（Py-IR） measurements. In the alkylation of benzene with dimethyl ether, the serials catalysts exhibited different benzene conversions. 70HZSM-11/30 SiO;mix showed the lowest benzene conversion while sample 70HZSM-11/30 SiO;mix-6.5h synthesized only for 6.5h displayed a higher benzene conversion, even higher than the value over 70HZSM-11/30Al;O;mix. Extending the crystallization time, the obtained samples displayed the increased benzene conversion in general under the same reaction conditions. In the end, the relation of physicochemical properties with the reaction performance was investigated.
文摘Objective:To assess the biomechanical properties of a new design configuration for zirconia dental implants. Methods: The new design has a cylindrical shape that is partially hollow and porous in the bottom, which permits the implants to be locked into the alveolar bone over time. It also utilizes bioactive glass coatings to increase adhesion to surrounding bone structure. Samples of the new design were fabricated in the laboratory and their material strength, hardness, and fracture toughness were evaluated. In addition, biocompatibility of the new design was evaluated through testing in dogs. Results: Results of mechanical tests indicate that structural properties of the new design exceed the usual requirements for implants. Moreover, animal tests suggest that there is appreciable improvement in lock-in strength and osteointegration. Conclusion: The new design configuration is biomechanically feasible and further research is warranted to improve the design for human use.
基金supported partially by the project of State Key Laboratory of Alternate Electrical Power System with Renewable Energy Sources(LAPS21004)the National Natural Science Foundation of China(51972110,52102245,52072121)+5 种基金the Beijing Science and Technology Project(Z211100004621010)the Beijing Natural Science Foundation(2222076,2222077)the Huaneng Group Headquarters Science and Technology Project(HNKJ20-H88)the Hebei Natural Science Foundation(E2022502022)the Fundamental Research Funds for the Central Universities(2021MS028,2020MS023,2020MS028)the NCEPU“Double First-Class”Program。
文摘Polyethylene oxide(PEO)-based electrolytes are considered as one of the most promising solid-state electrolytes for next-generation lithium batteries with high safety and energy density;however,the drawbacks such as insufficient ion conductance,mechanical strength and electrochemical stability hinder their applications in metallic lithium batteries.To enhance their overall properties,flexible and thin composite polymer electrolyte(CPE)membranes with 3D continuous aramid nanofiber(ANF)–Li_(1.4)Al_(0.4)Ti_(1.6)(PO_(4))_(3)(LATP)nanoparticle hybrid frameworks are facilely prepared by filling PEO–Li TFSI in the 3D nanohybrid scaffolds via a solution infusion way.The construction of the 3D continuous nanohybrid networks can effectively inhibit the PEO crystallization,facilitate the lithium salt dissociation and meanwhile increase the fast-ion transport in the continuous LATP electrolyte phase,and thus greatly improving the ionic conductivity(~3 times that of the pristine one).With the integration of the 3D continuity and flexibility of the 3D ANF networks and the thermostability of the LATP phase,the CPE membranes also show a wider electrochemical window(~5.0 V vs.4.3 V),higher tensile strength(~4–10times that of the pristine one)and thermostability,and better lithium dendrite resistance capability.Furthermore,the CPE-based Li FePO_(4)/Li cells exhibit superior cycling stability(133 m Ah/g after 100 cycles at 0.3 C)and rate performance(100 m Ah/g at 1 C)than the pristine electrolyte-based cell(79 and 29m Ah/g,respectively).This work offers an important CPE design criteria to achieve comprehensivelyupgraded solid-state electrolytes for safe and high-energy metal battery applications.
基金financially supported by the National Key Research and Development Program of China(No.2019YFA0708700)National Natural Science Foundation of China(52174054,51804326)Shandong Provincial Natural Science Foundation(ZR2019BEE046)
文摘The effect of mechanical strength of the dispersed particle gel(DPG)on its macro plugging performance is significant,however,little study has been reported.In this paper,DPG particles with different mechanical strengths were obtained by mechanical shearing of bulk gels prepared with different formula.Young’s moduli of DPG particles on the micro and nano scales were measured by atomic force microscope for the first time.The mapping relationship among the formula of bulk gel,the Young’s moduli of the DPG particles and the final plugging performance were established.The results showed that when the Young’s moduli of the DPG particles increased from 82 to 328 Pa,the plugging rate increased significantly from 91.46%to 97.10%due to the distinctly enhanced stacking density and strength at this range.While when the Young’s moduli of the DPG particles surpassed 328 Pa,the further increase of plugging rate with the Young’s moduli of the DPG particles became insignificant.These results indicated that the improvement of plugging rate was more efficient by adjusting the Young’s moduli of the DPG particles within certain ranges,providing guidance for improving the macroscopic application properties of DPG systems in reservoir heterogeneity regulation.
基金Financial supports for this work, provided by the National Natural Science Foundation of China (No. 51274097)the Scientific Research Fund of Hunan Provincial Education Department of China (No. 13A020)the Open Projects of State Key Laboratory of Coal Resources and Safe Mining, CUMT (No. 13KF03)
文摘In order to study the mechanism of water inrush from a concealed, confined karst cave, we established a fluid–solid coupling model of water inrush from a concealed karst cave ahead of a roadway and a strength reduction method in a rock pillar for preventing water inrush based on catastrophic theory. Fluid–solid coupling effects and safety margins in a rock pillar were studied. Analysis shows that rock pillar instability, exerted by disturbance stress and seepage stress, is the process of rock pillar catastrophic destabilization induced by nonlinear extension of plastic zones in the rock pillar. Seepage flow emerges in the rock pillar for preventing water inrush, accompanied by mechanical instability of the rock pillar. Taking the accident of a confined karst cave water-inrush of Qiyi Mine as an example, by studying the safety factor of the rock pillar and the relationship between karst cave water pressure and thickness of the rock pillar,it is proposed that rock pillar thickness with a safety factor equal to 1.5 is regarded as the calculated safety thickness of the rock pillar, which should be equal to the sum of the blasthole depth, blasting disturbance depth and the calculated safety thickness of the rock pillar. The cause of the karst water inrush at Qiyi Mine is that the rock pillar was so small that it did not possess a safety margin. Combining fluid–solid coupling theory, catastrophic theory and strength reduction method to study the nonlinear mechanical response of complicated rock engineering, new avenues for quantitative analysis of rock engineering stability evaluation should be forthcoming.
文摘This paper takes No.52 return uphill roadway of Yangquhe coal mine as a research project. Based on the research, especially its geological condition, indoor experiments, numerical simulation and theoretical analysis were employed to determine the difficult coefficients of Yangquhe project. By using these means,the difficult coefficients of the deep rock engineering were determined. From a study of the effects of crustal stress and the roof mechanism on roadway stability, the transformation mechanism in Yangquhe coal mine has been determined. As a result of this research, the interactive support technology of prestressed cable mesh was developed and the technology tested in mining engineering, which proved to be feasible.
