Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction...Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction technology, a double-layer-plasma-based metasurface—composed of a checkerboard metasurface, a double-layer plasma and an air gap between them—was investigated. Based on the principle of backscattering cancellation, we designed a checkerboard metasurface composed of different artificial magnetic conductor units;the checkerboard metasurface can reflect vertically incident electromagnetic(EM) waves in four different inclined directions to reduce the RCS. Full-wave simulations confirm that the doublelayer-plasma-based metasurface can improve the RCS reduction effect of the metasurface and the plasma. This is because in a band lower than the working band of the metasurface, the RCS reduction effect is mainly improved by the plasma layer. In the working band of the metasurface,impedance mismatching between the air gap and first plasma layer and between first and second plasma layers cause the scattered waves to become more dispersed, so the propagation path of the EM waves in the plasma becomes longer, increasing the absorption of the EM waves by the plasma. Thus, the RCS reduction effect is enhanced. The double-layer-plasma-based metasurface can be insensitive to the polarization of the incoming EM waves, and can also maintain a satisfactory RCS reduction band when the incident waves are oblique.展开更多
Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reac...Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.展开更多
Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of l...Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.展开更多
Nanocarbon-based materials, such as carbon nanotubes(CNTs) and graphene have been attached much attention by scientific and industrial community. As two representative nanocarbon materials, one-dimensional CNTs and tw...Nanocarbon-based materials, such as carbon nanotubes(CNTs) and graphene have been attached much attention by scientific and industrial community. As two representative nanocarbon materials, one-dimensional CNTs and twodimensional graphene both possess remarkable mechanical properties. In the past years, a large amount of work have been done by using CNTs or graphene as building blocks for constructing novel, macroscopic, mechanically strong fibrous materials. In this review, we summarize the assembly approaches of CNT-based fibers and graphene-based fibers in chronological order, respectively. The mechanical performances of these fibrous materials are compared, and the critical influences on the mechanical properties are discussed. Personal perspectives on the fabrication methods of CNT-and graphene-based fibers are further presented.展开更多
The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs ha...The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the penetration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8%. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the majoreminor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was investigated with respect to the caliber radius head, axial stress, and resistance.展开更多
The evolution of gas bearing channels in the roof,and their spatial distribution,was studied.A complete consideration of gas flow changes through the stress-strain changes in the roof near a working face is made.The t...The evolution of gas bearing channels in the roof,and their spatial distribution,was studied.A complete consideration of gas flow changes through the stress-strain changes in the roof near a working face is made.The theoretical abutment pressure distribution using displacement monitors and borehole visual recording instruments allow a theoretical analysis.Field test research determined the conditions for formation of macroscopic gas channels.These appear along the working face roof,normally distributed to it.These results show that the coal rock stratification becomes a macroscopic gas channel boundary if its deformation is less than the lower layer,or greater than the layer above it.At the same time the stability is greater than the distance from the roof for hanging dew conditions.The working face advances and the roof gas channels experience a cycle of development.Microscopic channels dominate the initial stage then macroscopic gas channels form,develop,and close.The evolution of the macroscopic channels depends on the ratio between the distances from the new compaction area in the goaf to the initial stress area in front of the working face.The amount of daily advance of the face also affects channel development.The experimental observations in one mining area showed that the main gas channels are located about 2 and 6.2 m above the lower surface of the roof and that they have an evolution period 7 to 11 days long.展开更多
We have observed the macroscopic resonant tunneling of magnetic flux between macroscopically distinct quantum states in a superconducting flux qubit. The dependences of the macroscopic resonant tunneling on the barrie...We have observed the macroscopic resonant tunneling of magnetic flux between macroscopically distinct quantum states in a superconducting flux qubit. The dependences of the macroscopic resonant tunneling on the barrier height of the potential well, the flux bias and the initial state are investigated. Detailed measurements of the tunneling rate as a function of the flux bias reveal the feature of the quantum noise in the superconducting flux qubit.展开更多
Background:Since the trauma knowledge of trauma providers correlates with the outcomes of injured patients,this study aims to assess the socio-demographic characteristics and levels of trauma knowledge of trainees in ...Background:Since the trauma knowledge of trauma providers correlates with the outcomes of injured patients,this study aims to assess the socio-demographic characteristics and levels of trauma knowledge of trainees in the China trauma care training(CTCT)program in addition to their post-course test results to provide support for the development of trauma care training programs and trauma systems in China.Methods:A cross-sectional study was conducted by collecting demographic information,hospital-related information and trauma knowledge of the trainees from 19 regions in China.All participants were assessed by questionnaires collecting the socio-demographic data,the trauma care knowledge levels and the information of the hospitals.Results:There were 955 males(78.9%)and 256 females(21.1%)enrolled.Among them,854 were physicians(70.5%),357 were registered nurses(29.5%).In addition,64 of them also played an administrative role in the hospitals(5.3%).The score of the trainees who were members of the emergency department staff(72.59±14.13)was the highest among the scores of all the personnel surveyed,followed by those of the trainees from the intensive care unit(ICU)(71.17±12.72),trauma surgery department(67.26±13.81),orthopedics department(70.36±14.48),general surgery department(69.91±14.79)and other departments(69.93±16.91),P=0.031.The score of the professors(73.09±15.05)was higher than those of the associate professors(72.40±14.71),lecturers(70.07±14.25)and teaching assistants(67.58±15.16),P<0.0001.The score of the individuals who attended experts’trauma lectures(72.22±14.45)was higher than that of individuals who did not attend the lectures(69.33±15.17),P=0.001.The mean scores before and after the training were 71.02±14.82 and 84.24±13.77,respectively,P<0.001.The mean score of trauma knowledge after the training of trainees from different provinces and with different educational backgrounds was higher than that before the training,with a statistically significant difference(P<0.05).Conclusions:The level of trauma knowledge of trauma care providers was associated with their department,professional position and previous participation in related academic conferences.Trauma care experience and participation in academic lectures and training program including CTCT may effectively improve individuals’level of trauma knowledge.展开更多
The regularity of solutions to the Boltzmann equation is a fundamental problem in the kinetic theory. In this paper, the case with angular cut-off is investigated. It is shown that the macroscopic parts of solutions t...The regularity of solutions to the Boltzmann equation is a fundamental problem in the kinetic theory. In this paper, the case with angular cut-off is investigated. It is shown that the macroscopic parts of solutions to the Boltzmann equation, i.e., the density, momentum and total energy are continuous functions of （x, t） in the region R3 × （0, ＋∞）. More precisely, these macroscopic quantities immediately become continuous in any positive time even though they are initially discontinuous and the discontinuities of solutions propagate only in the microscopic level. It should be noted that such kind of phenomenon can not hap- pen for the compressible Navier-Stokes equations in which the initial discontinuities of the density never vanish in any finite time, see [22]. This hints that the Boltzmann equation has better regularity effect in the macroscopic level than compressible Navier-Stokes equations.展开更多
Objective To investigate whether ABO blood groups is associated with the severity of coronary artery disease(CAD). Methods Between January 2015 and December 2017, 1425 first diagnosed CAD patients confirmed by selecti...Objective To investigate whether ABO blood groups is associated with the severity of coronary artery disease(CAD). Methods Between January 2015 and December 2017, 1425 first diagnosed CAD patients confirmed by selective coronary angiography were recruited into this cross-sectional study, and their baseline characteristics, ABO blood groups, Gensini score were collected. Multiple linear regression analysis was performed to test the association between the severity of CAD and ABO blood groups. Results The Gensini score was significantly higher in the blood group A than in the non-A groups(41.2 ± 32 vs. 38 ± 27;P = 0.026). After adjusting for age, male, smoking, family history of CAD, hypertension, diabetes mellitus and hypercholesterolemia, multivariate linear regression indicated that blood group A was associated with the severity of CAD(β= 3.298, 95% CI: 0.91–6.505, P = 0.044). In diabetes group, A blood type was also associated with increased Gensini score(P = 0.02) after adjusting for age, male, family history of CAD, hypercholesterolemia, smoking and hypertension. Conclusion In this cross-sectional study, the data indicated that blood group A was an independent risk factor of severity of CAD in Chinese population and Chinese patients with type 2 diabetes.展开更多
A traffic model based on the road surface conditions during adverse weather is presented. The surface of a road is affected by snow, compacted snow, and ice, which affects the traffic behavior. In this paper, a new ma...A traffic model based on the road surface conditions during adverse weather is presented. The surface of a road is affected by snow, compacted snow, and ice, which affects the traffic behavior. In this paper, a new macroscopic traffic flow model based on the transition velocity distribution is proposed which characterizes traffic alignment under adverse weather conditions. Two examples are considered to illustrate the effect of the transition velocity behavior on traffic velocity and density. Simulation results are presented which show that this model provides a more accurate characterization of traffic flow behavior than the well known Payne-Whitham model. The proposed model can be used to reduce accidents and improve road safety during adverse weather conditions.展开更多
Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadwa...Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadways. The experimental results show that the influence of blast load on adjacent roadway has a good relationship with the cross-section of roadway. The expansion distance of precrack existed in circular, arch-wall, rectangular roadway is respectively 1.76, 1.61 and 0 cm under blast load.At the same time, the direct-blast side of rectangular roadway has more obvious damage compared with circular and arch-wall roadway. It explains that plane reflects more stress wave than arc, so that it exerts more tensile failure in the direct-blast side, which leads to less stress wave diffracting to the precrack in the back-blast side. When the precrack extends, higher value dynamic stress intensity factor in circular roadway works longer than that of arch-wall roadway. Indirectly, it explains that plane's weakening function on stress wave is significantly stronger than arc. Stress wave brings about self-evident influence on the upper and bottom endpoints of the rectangular roadway, and it respectively extends 1.03, 2.06 cm along the line link direction of the center of the blasthole and the upper and bottom endpoints on the right wall.展开更多
Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. S...Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.展开更多
Hydrophobic interactions have been studied before in detail based on hydrophobic polymers,such as polystyrene(PS).Because fluorinated materials have relatively low surface energy,they often show both oleophobicity and...Hydrophobic interactions have been studied before in detail based on hydrophobic polymers,such as polystyrene(PS).Because fluorinated materials have relatively low surface energy,they often show both oleophobicity and hydrophobicity at the macroscopic level.However,it remains unknown how fluorination of hydrophobic polymer influences hydrophobicity at the microscopic level.We synthesized PS and fluorine-substituted PS(FPS)by employing the reversible addition-fragmentation chain transfer polymerization method.Contact angle measurements confirmed that FPS is more hydrophobic than PS at the macroscopic level due to the introduction of fluorine.However,single molecule force spectroscopy experiments showed that the forces required to unfold the PS and FPS nanoparticles in water are indistinguishable,indicating that the strength of the hydrophobic effect that drives the self-assembly of PS and FPS nanoparticles is the same at the microscopic level.The divergence of hydrophobic effect at the macroscopic and microscopic level may hint different underlying mechanisms:the hydrophobicity is dominated by the solvent hydration at the microscopic level and the surface-associated interaction at the macroscopic level.展开更多
Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionizati...Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.展开更多
Out-of-plane microneedle structures are widely used in various applications such as transcutaneous drug delivery and neural signal recording for brain machine interface.This work presents a novel but simple method to ...Out-of-plane microneedle structures are widely used in various applications such as transcutaneous drug delivery and neural signal recording for brain machine interface.This work presents a novel but simple method to fabricate high-density silicon(Si)microneedle arrays with various heights and diverse cross-sectional shapes depending on photomask pattern designs.The proposed fabrication method is composed of a single photolithography and two subsequent deep reactive ion etching(DRIE)steps.First,a photoresist layer was patterned on a Si substrate to define areas to be etched,which will eventually determine the final location and shape of each individual microneedle.Then,the 1st DRIE step created deep trenches with a highly anisotropic etching of the Si substrate.Subsequently,the photoresist was removed for more isotropic etching;the 2nd DRIE isolated and sharpened microneedles from the predefined trench structures.Depending on diverse photomask designs,the 2nd DRIE formed arrays of microneedles that have various height distributions,as well as diverse cross-sectional shapes across the substrate.With these simple steps,high-aspect ratio microneedles were created in the high density of up to 625 microneedles mm^(-2)on a Si wafer.Insertion tests showed a small force as low as~172μN/microneedle is required for microneedle arrays to penetrate the dura mater of a mouse brain.To demonstrate a feasibility of drug delivery application,we also implemented silk microneedle arrays using molding processes.The fabrication method of the present study is expected to be broadly applicable to create microneedle structures for drug delivery,neuroprosthetic devices,and so on.展开更多
We have measured the cross-section ratios of helium induced by Cq＋ and Oq＋ （q = 1-4） in an energy range from 20 keV/amu to 500 keV/amu, and obtained the two-dimensional spectra by employing the coincidence method ...We have measured the cross-section ratios of helium induced by Cq＋ and Oq＋ （q = 1-4） in an energy range from 20 keV/amu to 500 keV/amu, and obtained the two-dimensional spectra by employing the coincidence method combined with the MPA-3 data acquisition system. Hence, we obtain the ratios of total single-ionization cross-sections （SI, SC, SLSI, and DLSI）, total double-ionization cross-sections （DI, DC, TI, SLDI, and DLDI） and cross-sections of every process （SI, SC, SLSI, DLSI, DI, DC, TI, SLDI, and DLDI）, which induce the single-ionization and double-ionization, to the total cross sections respectively. The competitive relations between the reaction-channels and the experimental data law of each reaction-channel are revealed explicitly, and the qualitative explanations involved in those results are also presented accordingly.展开更多
To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with...To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with the Back-n white neutron source at the China Spallation Neutron Source. The measured cross section is consistent with the soft error data from the manufacturer and the result suggests that the threshold energy of the SEU is about 0.5 Me V, which confirms the statement in Iwashita’s report that the threshold energy for neutron soft error is much below that of the(n, α) cross-section of silicon.In addition, an index of the effective neutron energy is suggested to characterize the similarity between a spallation neutron beam and the standard atmospheric neutron environment.展开更多
Cross-sections of the(n,2n) reactions for neodymium(Nd) isotopes induced by 14 MeV neutrons were measured in this work by using the activation and relative methods. The measured cross-sections of the ^(150)Nd(n,2n)^(1...Cross-sections of the(n,2n) reactions for neodymium(Nd) isotopes induced by 14 MeV neutrons were measured in this work by using the activation and relative methods. The measured cross-sections of the ^(150)Nd(n,2n)^(149)Nd,^(148)Nd(n,2n)^(147)Nd, and ^(142)Nd(n,2 n)^(141)Nd reactions were 1854 ± 81, 1789 ± 119, and 1559 ± 98 mb, respectively, at a neutron energy of 14.2 ± 0.2 MeV,and 1485 ± 74, 1726 ± 85, and 1670 ± 119 mb, respectively, at 14.9 ± 0.2 MeV. The results were compared with the experimental values from the reported literature, with the evaluated data from the ENDF/B-VII.1, CENDL-3.1, and JENDL-4.0 libraries, and with the curves calculated by the Talys-1.8 code.展开更多
Pairing in the cuprate high-temperature superconductors and its origin remain among the most enduring mysteries in condensed matter physics. With cross-sectional scanning tunneling microscopy/spectroscopy, we clearly ...Pairing in the cuprate high-temperature superconductors and its origin remain among the most enduring mysteries in condensed matter physics. With cross-sectional scanning tunneling microscopy/spectroscopy, we clearly reveal the spatial-dependence or inhomogeneity of the superconducting gap structure of Bi2Sr2CaCu2O8＋δ （Bi2212） and YBa2Cu3O7-x （YBCO） along their c-axes on a scale shorter than the interlayer spacing. By tunneling into the （100） plane of a Bi2212 single crystal and a YBCO film, we observe both U-shaped tunneling spectra with extended fiat zero-conductance bottoms, and V-shaped gap structures, in different regions of each sample. On the YBCO film, tunneling into a （110） surface only reveals a U-shaped gap without any zero-bias peak. Our analysis suggests that the U-shaped gap is likely a nodeless superconducting gap. The V-shaped gap has a very small amplitude, and is likely proximity-induced by regions having the larger U-shaped gap.展开更多
基金supported in part by the China Postdoctoral Science Foundation (No. 2020M673341)in part by the Natural Science Basic Research Program of Shaanxi (No.2023-JC-YB-549)+1 种基金in part by National Natural Science Foundation of China (Nos. 62371375 and 62371372)Innovation Capability Support Program of Shaanxi (No. 2022TD-37)。
文摘Reduction of the radar cross-section(RCS) is the key to stealth technology. To improve the RCS reduction effect of the designed checkerboard metasurface and overcome the limitation of thinlayer plasma in RCS reduction technology, a double-layer-plasma-based metasurface—composed of a checkerboard metasurface, a double-layer plasma and an air gap between them—was investigated. Based on the principle of backscattering cancellation, we designed a checkerboard metasurface composed of different artificial magnetic conductor units;the checkerboard metasurface can reflect vertically incident electromagnetic(EM) waves in four different inclined directions to reduce the RCS. Full-wave simulations confirm that the doublelayer-plasma-based metasurface can improve the RCS reduction effect of the metasurface and the plasma. This is because in a band lower than the working band of the metasurface, the RCS reduction effect is mainly improved by the plasma layer. In the working band of the metasurface,impedance mismatching between the air gap and first plasma layer and between first and second plasma layers cause the scattered waves to become more dispersed, so the propagation path of the EM waves in the plasma becomes longer, increasing the absorption of the EM waves by the plasma. Thus, the RCS reduction effect is enhanced. The double-layer-plasma-based metasurface can be insensitive to the polarization of the incoming EM waves, and can also maintain a satisfactory RCS reduction band when the incident waves are oblique.
基金supported by the Key Laboratory of Nuclear Data foundation(No.JCKY2022201C157)。
文摘Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.
基金supported by the National Natural Science Foundation of China(No.12065003)the Guangxi Key R&D Project(2023AB07029)+1 种基金the Scientific Research and Technology Development Project of Guilin(20210104-2)the Central Government Guides Local Scientific and Technological Development Funds of China(Guike ZY22096024)。
文摘Based on the unified Hauser–Feshbach and exciton model,which can describe the particle emission processes between discrete energy levels with energy,angular momentum,and parity conservations,a statistical theory of light nucleus reaction(STLN)is developed to calculate the double-differential cross-sections of the outgoing neutron and light charged particles for the proton-induced^(6) Li reaction.A significant difference is observed between the p+^(6) Li and p+^(7) Li reactions owing to the discrepancies in the energy-level structures of the targets.The reaction channels,including sequential and simultaneous emission processes,are analyzed in detail.Taking the double-differential cross-sections of the outgoing proton as an example,the influence of contaminations(such as^(1) H,^(7)Li,^(12)C,and^(16)O)on the target is identified in terms of the kinetic energy of the first emitted particles.The optical potential parameters of the proton are obtained by fitting the elastic scattering differential cross-sections.The calculated total double-differential cross-sections of the outgoing proton and deuteron at E_(p)=14 MeV agree well with the experimental data for different outgoing angles.Simultaneously,the mixed double differential cross-sections of^(3) He andαare in good agreement with the measurements.The agreement between the measured data and calculated results indicates that the two-body and three-body breakup reactions need to be considered,and the pre-equilibrium reaction mechanism dominates the reaction processes.Based on the STLN model,a PLUNF code for the p+^(6) Li reaction is developed to obtain an ENDF-6-formatted file of the double-differential cross-sections of the nucleon and light composite charged particles.
基金supported by the National Natural Science Foundation of China (Nos. 21325417, 51533008)the MOST National Key Research and Development Plan (2016YFA0200200)+1 种基金the National Postdoctoral Program for Innovative Talents (No. BX201700209)the State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, Donghua University (No. LK1403)
文摘Nanocarbon-based materials, such as carbon nanotubes(CNTs) and graphene have been attached much attention by scientific and industrial community. As two representative nanocarbon materials, one-dimensional CNTs and twodimensional graphene both possess remarkable mechanical properties. In the past years, a large amount of work have been done by using CNTs or graphene as building blocks for constructing novel, macroscopic, mechanically strong fibrous materials. In this review, we summarize the assembly approaches of CNT-based fibers and graphene-based fibers in chronological order, respectively. The mechanical performances of these fibrous materials are compared, and the critical influences on the mechanical properties are discussed. Personal perspectives on the fabrication methods of CNT-and graphene-based fibers are further presented.
基金supported by the National Natural Science Foundation of China (Nos. 11772269, 11802248, and 11872318)。
文摘The elliptical cross-section ogive-nose projectile(ECOP) has recently attracted attention because it is well suited to the flattened shape of earth-penetrating weapons. However, the penetration performance of ECOPs has not been completely understood. The objective of this study was to investigate the penetration performance of ECOPs into concrete targets using a theoretical method. A general geometric model of ECOPs was introduced, and closed-form penetration equations were derived according to the dynamic cavity-expansion theory. The model was validated by comparing the predicted penetration depths with test data, and the maximum deviation was 15.8%. The increment in the penetration depth of the ECOP was evaluated using the proposed model, and the effect of the majoreminor axis ratio on the increment was examined. Additionally, the mechanism of the penetration-depth increment was investigated with respect to the caliber radius head, axial stress, and resistance.
基金provided by the State Key BasicResearch Program of China(No.2011CB201204)the National Natural Science Foundation of China(Nos.51204187 and 51234005)
文摘The evolution of gas bearing channels in the roof,and their spatial distribution,was studied.A complete consideration of gas flow changes through the stress-strain changes in the roof near a working face is made.The theoretical abutment pressure distribution using displacement monitors and borehole visual recording instruments allow a theoretical analysis.Field test research determined the conditions for formation of macroscopic gas channels.These appear along the working face roof,normally distributed to it.These results show that the coal rock stratification becomes a macroscopic gas channel boundary if its deformation is less than the lower layer,or greater than the layer above it.At the same time the stability is greater than the distance from the roof for hanging dew conditions.The working face advances and the roof gas channels experience a cycle of development.Microscopic channels dominate the initial stage then macroscopic gas channels form,develop,and close.The evolution of the macroscopic channels depends on the ratio between the distances from the new compaction area in the goaf to the initial stress area in front of the working face.The amount of daily advance of the face also affects channel development.The experimental observations in one mining area showed that the main gas channels are located about 2 and 6.2 m above the lower surface of the roof and that they have an evolution period 7 to 11 days long.
基金Project supported by the New Century Excellent Talents in University,Chinathe National Natural Science Foundation of China(Grant Nos. 11074114 and 10874074)the National Basic Research Program of China (Grant No. 2011CBA00200)
文摘We have observed the macroscopic resonant tunneling of magnetic flux between macroscopically distinct quantum states in a superconducting flux qubit. The dependences of the macroscopic resonant tunneling on the barrier height of the potential well, the flux bias and the initial state are investigated. Detailed measurements of the tunneling rate as a function of the flux bias reveal the feature of the quantum noise in the superconducting flux qubit.
基金support by grants from the“Chongqing Science and Technology Benefiting project”(cstc2016kjhmpt1001)research project from the State Key Laboratory of Trauma,Burns and Combined Injury(SKLZZ201603)。
文摘Background:Since the trauma knowledge of trauma providers correlates with the outcomes of injured patients,this study aims to assess the socio-demographic characteristics and levels of trauma knowledge of trainees in the China trauma care training(CTCT)program in addition to their post-course test results to provide support for the development of trauma care training programs and trauma systems in China.Methods:A cross-sectional study was conducted by collecting demographic information,hospital-related information and trauma knowledge of the trainees from 19 regions in China.All participants were assessed by questionnaires collecting the socio-demographic data,the trauma care knowledge levels and the information of the hospitals.Results:There were 955 males(78.9%)and 256 females(21.1%)enrolled.Among them,854 were physicians(70.5%),357 were registered nurses(29.5%).In addition,64 of them also played an administrative role in the hospitals(5.3%).The score of the trainees who were members of the emergency department staff(72.59±14.13)was the highest among the scores of all the personnel surveyed,followed by those of the trainees from the intensive care unit(ICU)(71.17±12.72),trauma surgery department(67.26±13.81),orthopedics department(70.36±14.48),general surgery department(69.91±14.79)and other departments(69.93±16.91),P=0.031.The score of the professors(73.09±15.05)was higher than those of the associate professors(72.40±14.71),lecturers(70.07±14.25)and teaching assistants(67.58±15.16),P<0.0001.The score of the individuals who attended experts’trauma lectures(72.22±14.45)was higher than that of individuals who did not attend the lectures(69.33±15.17),P=0.001.The mean scores before and after the training were 71.02±14.82 and 84.24±13.77,respectively,P<0.001.The mean score of trauma knowledge after the training of trainees from different provinces and with different educational backgrounds was higher than that before the training,with a statistically significant difference(P<0.05).Conclusions:The level of trauma knowledge of trauma care providers was associated with their department,professional position and previous participation in related academic conferences.Trauma care experience and participation in academic lectures and training program including CTCT may effectively improve individuals’level of trauma knowledge.
基金partially supported by by National Center for Mathematics and Interdisciplinary Sciences,AMSS,CAS and NSFC(11371349 and 11688101)partially supported by NSFC(11688101,11771429)
文摘The regularity of solutions to the Boltzmann equation is a fundamental problem in the kinetic theory. In this paper, the case with angular cut-off is investigated. It is shown that the macroscopic parts of solutions to the Boltzmann equation, i.e., the density, momentum and total energy are continuous functions of （x, t） in the region R3 × （0, ＋∞）. More precisely, these macroscopic quantities immediately become continuous in any positive time even though they are initially discontinuous and the discontinuities of solutions propagate only in the microscopic level. It should be noted that such kind of phenomenon can not hap- pen for the compressible Navier-Stokes equations in which the initial discontinuities of the density never vanish in any finite time, see [22]. This hints that the Boltzmann equation has better regularity effect in the macroscopic level than compressible Navier-Stokes equations.
基金supported by grants from Clinical Vascular Grant in Chinese Physicians—VG
文摘Objective To investigate whether ABO blood groups is associated with the severity of coronary artery disease(CAD). Methods Between January 2015 and December 2017, 1425 first diagnosed CAD patients confirmed by selective coronary angiography were recruited into this cross-sectional study, and their baseline characteristics, ABO blood groups, Gensini score were collected. Multiple linear regression analysis was performed to test the association between the severity of CAD and ABO blood groups. Results The Gensini score was significantly higher in the blood group A than in the non-A groups(41.2 ± 32 vs. 38 ± 27;P = 0.026). After adjusting for age, male, smoking, family history of CAD, hypertension, diabetes mellitus and hypercholesterolemia, multivariate linear regression indicated that blood group A was associated with the severity of CAD(β= 3.298, 95% CI: 0.91–6.505, P = 0.044). In diabetes group, A blood type was also associated with increased Gensini score(P = 0.02) after adjusting for age, male, family history of CAD, hypercholesterolemia, smoking and hypertension. Conclusion In this cross-sectional study, the data indicated that blood group A was an independent risk factor of severity of CAD in Chinese population and Chinese patients with type 2 diabetes.
基金Project supported by Higher Education Commission,Pakistan/National Center of Big Data and Cloud Computing
文摘A traffic model based on the road surface conditions during adverse weather is presented. The surface of a road is affected by snow, compacted snow, and ice, which affects the traffic behavior. In this paper, a new macroscopic traffic flow model based on the transition velocity distribution is proposed which characterizes traffic alignment under adverse weather conditions. Two examples are considered to illustrate the effect of the transition velocity behavior on traffic velocity and density. Simulation results are presented which show that this model provides a more accurate characterization of traffic flow behavior than the well known Payne-Whitham model. The proposed model can be used to reduce accidents and improve road safety during adverse weather conditions.
基金provided by the National Natural Science Foundation of China (Nos. 51274204 and 51134025)National Key Basic Research Program (No. 2010CB732002)The Ministry of Education Program for New Century Excellent Talents to Support Project of China (No. NCET-12-0965)
文摘Using digital laser dynamic caustics experimental system and conducting simulation experiment researched the influence rule of blasting excavation of a new roadway on neighboring existed different cross-section roadways. The experimental results show that the influence of blast load on adjacent roadway has a good relationship with the cross-section of roadway. The expansion distance of precrack existed in circular, arch-wall, rectangular roadway is respectively 1.76, 1.61 and 0 cm under blast load.At the same time, the direct-blast side of rectangular roadway has more obvious damage compared with circular and arch-wall roadway. It explains that plane reflects more stress wave than arc, so that it exerts more tensile failure in the direct-blast side, which leads to less stress wave diffracting to the precrack in the back-blast side. When the precrack extends, higher value dynamic stress intensity factor in circular roadway works longer than that of arch-wall roadway. Indirectly, it explains that plane's weakening function on stress wave is significantly stronger than arc. Stress wave brings about self-evident influence on the upper and bottom endpoints of the rectangular roadway, and it respectively extends 1.03, 2.06 cm along the line link direction of the center of the blasthole and the upper and bottom endpoints on the right wall.
基金financially supported by the National Natural Science Foundation of China(Grant No.11372136)
文摘Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.
基金supported by the National Key R&D Program of China(Grant No.2020YFA0908100)。
文摘Hydrophobic interactions have been studied before in detail based on hydrophobic polymers,such as polystyrene(PS).Because fluorinated materials have relatively low surface energy,they often show both oleophobicity and hydrophobicity at the macroscopic level.However,it remains unknown how fluorination of hydrophobic polymer influences hydrophobicity at the microscopic level.We synthesized PS and fluorine-substituted PS(FPS)by employing the reversible addition-fragmentation chain transfer polymerization method.Contact angle measurements confirmed that FPS is more hydrophobic than PS at the macroscopic level due to the introduction of fluorine.However,single molecule force spectroscopy experiments showed that the forces required to unfold the PS and FPS nanoparticles in water are indistinguishable,indicating that the strength of the hydrophobic effect that drives the self-assembly of PS and FPS nanoparticles is the same at the microscopic level.The divergence of hydrophobic effect at the macroscopic and microscopic level may hint different underlying mechanisms:the hydrophobicity is dominated by the solvent hydration at the microscopic level and the surface-associated interaction at the macroscopic level.
基金supported by National Natural Science Foundation of China(No.U1966211)National Key R&D Program of China(No.2021YFB2401400)。
文摘Prediction models were proposed to estimate the reduced Townsend ionization coefficient and ionization cross-section.A shape function of the reduced Townsend ionization coefficient curves was derived from the ionization collision probability model.The function had three parameters:the first ionization potential energy,A_(α),and B_(α).A_(α)and B_(α)were related to the molecule symmetry and size.The polarization of molecules could characterize the molecule symmetry.The multi-layer molecular cross-section(MMCS)was proposed to describe the contributions of electrons and molecule radius on different molecule surfaces to collisions.A prediction model of the ionization cross-section was also proposed based on Aα.The molecule parameters were calculated by the Becke3–Lee–Yang–Parr(B3LYP)method and the 6–311G**basis set.We used available data of 30 and 23 gases,respectively,to build the prediction models of reduced Townsend ionization coefficients and ionization cross-sections.The relationships between the molecular parameters Aαand Bαand the ionization cross-section were built up via nonlinear fittings.The determination coefficients R^(2)of Aα,Bα,and the ionization cross-section were 0.877,0.887,and 0.838,respectively.The results showed that the accuracy of models was positively correlated with the molecule symmetry and reduced electric field.This was mainly related to the accuracy of the MMCS model in predicting Aα.The MMCS model needed to be improved to describe the collision direction selectivity caused by the molecule asymmetry.Under a high reduced electric field,that error of Aαhad less influence on the prediction results.However,the prediction results for single atoms with high symmetry were poor.This may be due to the absolute error of the model close to single atoms’reduced Townsend ionization coefficients.The models could provide the basis for gas insulation prediction and discharge calculations,especially for symmetric molecules under a high electric field.
基金This work was supported by KIST(Korea Institute of Science and Technology)institutional grants(2E30965,and 2V07360)the National R&D Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(Nos.2020R1C1C1006065,2021M3F3A2A01037366)+1 种基金This work was also supported by the Korea Medical Device Development Fund grant funded by the Korea government(the Ministry of Science and ICT,the Ministry of Trade,Industry and Energy,the Ministry of Health&Welfarethe Ministry of Food and Drug Safety)(Project Number:9991006818,KMDF_PR_20200901_0145-2021).
文摘Out-of-plane microneedle structures are widely used in various applications such as transcutaneous drug delivery and neural signal recording for brain machine interface.This work presents a novel but simple method to fabricate high-density silicon(Si)microneedle arrays with various heights and diverse cross-sectional shapes depending on photomask pattern designs.The proposed fabrication method is composed of a single photolithography and two subsequent deep reactive ion etching(DRIE)steps.First,a photoresist layer was patterned on a Si substrate to define areas to be etched,which will eventually determine the final location and shape of each individual microneedle.Then,the 1st DRIE step created deep trenches with a highly anisotropic etching of the Si substrate.Subsequently,the photoresist was removed for more isotropic etching;the 2nd DRIE isolated and sharpened microneedles from the predefined trench structures.Depending on diverse photomask designs,the 2nd DRIE formed arrays of microneedles that have various height distributions,as well as diverse cross-sectional shapes across the substrate.With these simple steps,high-aspect ratio microneedles were created in the high density of up to 625 microneedles mm^(-2)on a Si wafer.Insertion tests showed a small force as low as~172μN/microneedle is required for microneedle arrays to penetrate the dura mater of a mouse brain.To demonstrate a feasibility of drug delivery application,we also implemented silk microneedle arrays using molding processes.The fabrication method of the present study is expected to be broadly applicable to create microneedle structures for drug delivery,neuroprosthetic devices,and so on.
基金Project supported by the National Natural Science Foundation of China(Grant No.10775063)
文摘We have measured the cross-section ratios of helium induced by Cq＋ and Oq＋ （q = 1-4） in an energy range from 20 keV/amu to 500 keV/amu, and obtained the two-dimensional spectra by employing the coincidence method combined with the MPA-3 data acquisition system. Hence, we obtain the ratios of total single-ionization cross-sections （SI, SC, SLSI, and DLSI）, total double-ionization cross-sections （DI, DC, TI, SLDI, and DLDI） and cross-sections of every process （SI, SC, SLSI, DLSI, DI, DC, TI, SLDI, and DLDI）, which induce the single-ionization and double-ionization, to the total cross sections respectively. The competitive relations between the reaction-channels and the experimental data law of each reaction-channel are revealed explicitly, and the qualitative explanations involved in those results are also presented accordingly.
基金supported by the National Natural Science Foundation of China (Grant Nos. 2032165 and 62004158)the National Key Scientific Instrument and Equipment Development Project of China (Grant No. 52127817)+1 种基金the State Key Laboratory of Particle Detection and Electronics (Grant Nos. SKLPDE-ZZ-201801 and SKLPDE-ZZ-202008)the Special Funds for Science and Technology Innovation Strategy of Guangdong Province, China (Grant No. 2018A0303130030)。
文摘To predict the soft error rate for applications, it is essential to study the energy dependence of the single-event-upset(SEU) cross-section. In this work, we present a direct measurement of the SEU cross-section with the Back-n white neutron source at the China Spallation Neutron Source. The measured cross section is consistent with the soft error data from the manufacturer and the result suggests that the threshold energy of the SEU is about 0.5 Me V, which confirms the statement in Iwashita’s report that the threshold energy for neutron soft error is much below that of the(n, α) cross-section of silicon.In addition, an index of the effective neutron energy is suggested to characterize the similarity between a spallation neutron beam and the standard atmospheric neutron environment.
文摘Cross-sections of the(n,2n) reactions for neodymium(Nd) isotopes induced by 14 MeV neutrons were measured in this work by using the activation and relative methods. The measured cross-sections of the ^(150)Nd(n,2n)^(149)Nd,^(148)Nd(n,2n)^(147)Nd, and ^(142)Nd(n,2 n)^(141)Nd reactions were 1854 ± 81, 1789 ± 119, and 1559 ± 98 mb, respectively, at a neutron energy of 14.2 ± 0.2 MeV,and 1485 ± 74, 1726 ± 85, and 1670 ± 119 mb, respectively, at 14.9 ± 0.2 MeV. The results were compared with the experimental values from the reported literature, with the evaluated data from the ENDF/B-VII.1, CENDL-3.1, and JENDL-4.0 libraries, and with the curves calculated by the Talys-1.8 code.
基金Supported by the National Natural Science Foundation of Chinathe National Key Research and Development Program of China under Grant No 2016YFA0300203
文摘Pairing in the cuprate high-temperature superconductors and its origin remain among the most enduring mysteries in condensed matter physics. With cross-sectional scanning tunneling microscopy/spectroscopy, we clearly reveal the spatial-dependence or inhomogeneity of the superconducting gap structure of Bi2Sr2CaCu2O8＋δ （Bi2212） and YBa2Cu3O7-x （YBCO） along their c-axes on a scale shorter than the interlayer spacing. By tunneling into the （100） plane of a Bi2212 single crystal and a YBCO film, we observe both U-shaped tunneling spectra with extended fiat zero-conductance bottoms, and V-shaped gap structures, in different regions of each sample. On the YBCO film, tunneling into a （110） surface only reveals a U-shaped gap without any zero-bias peak. Our analysis suggests that the U-shaped gap is likely a nodeless superconducting gap. The V-shaped gap has a very small amplitude, and is likely proximity-induced by regions having the larger U-shaped gap.
