Acoustic scattering modulation caused by an undulating sea surface on the space-time dimension seriously affects underwater detection and target recognition.Herein,underwater acoustic scattering modulation from a movi...Acoustic scattering modulation caused by an undulating sea surface on the space-time dimension seriously affects underwater detection and target recognition.Herein,underwater acoustic scattering modulation from a moving rough sea surface is studied based on integral equation and parabolic equation.And with the principles of grating and constructive interference,the mechanism of this acoustic scattering modulation is explained.The periodicity of the interference of moving rough sea surface will lead to the interference of the scattering field at a series of discrete angles,which will form comb-like and frequency-shift characteristics on the intensity and the frequency spectrum of the acoustic scattering field,respectively,which is a high-order Bragg scattering phenomenon.Unlike the conventional Doppler effect,the frequency shifts of the Bragg scattering phenomenon are multiples of the undulating sea surface frequency and are independent of the incident sound wave frequency.Therefore,even if a low-frequency underwater acoustic field is incident,it will produce obvious frequency shifts.Moreover,under the action of ideal sinusoidal waves,swells,fully grown wind waves,unsteady wind waves,or mixed waves,different moving rough sea surfaces create different acoustic scattering processes and possess different frequency shift characteristics.For the swell wave,which tends to be a single harmonic wave,the moving rough sea surface produces more obvious high-order scattering and frequency shifts.The same phenomena are observed on the sea surface under fully grown wind waves,however,the frequency shift slightly offsets the multiple peak frequencies of the wind wave spectrum.Comparing with the swell and fully-grown wind waves,the acoustic scattering and frequency shift are not obvious for the sea surface under unsteady wind waves.展开更多
Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the te...Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the terminals. The application of WIPT to the underwater acoustic sensor networks(UWASNs) not only retains the long range communication capabilities, but also provides an auxiliary and convenient energy supplement way for the terminal sensors, and thus is a promising scheme to solve the energy-limited problem for the UWASNs. In this paper, we propose the integration of WIPT into the UWASNs and provide an overview on various enabling techniques for the WIPT based UWASNs(WIPT-UWASNs) as well as pointing out future research challenges and opportunities for WIPT-UWASNs.展开更多
Broadband absorption of low-frequency sound waves via a deep subwavelength structure is of great and ongoing interest in research and engineering.Here,we numerically and experimentally present a design of a broadband ...Broadband absorption of low-frequency sound waves via a deep subwavelength structure is of great and ongoing interest in research and engineering.Here,we numerically and experimentally present a design of a broadband lowfrequency absorber based on an acoustic metaporous composite(AMC).The AMC absorber is constructed by embedding a single metamaterial resonator into a porous layer.The finite element simulations show that a high absorption(absorptance A>0.8)can be achieved within a broad frequency range(from 290 Hz to 1074 Hz),while the thickness of AMC is 1/13of the corresponding wavelength at 290 Hz.The broadband and high-efficiency performances of the absorber are attributed to the coupling between the two resonant absorptions and the trapped mode.The numerical simulations and experimental results are obtained to be in good agreement with each other.Moreover,the high broadband absorption can be maintained under random incident acoustic waves.The proposed absorber provides potential applications in low-frequency noise reduction especially when limited space is demanded.展开更多
The passive acoustic localization with planar sensor array is introduced. Based on a method to eliminate the influence of effective sound velocity in passive detection, a new five-sensors solid array and its localizat...The passive acoustic localization with planar sensor array is introduced. Based on a method to eliminate the influence of effective sound velocity in passive detection, a new five-sensors solid array and its localization model are put forward. The factors that influence the precision of the localization are analyzed. Considering the errors from the factors synchronously, the simulation compares the solid array with the planar array. It can be proved that the five-sensor solid array is better than the four-sensor planar array in the estimation of bearing elements.展开更多
Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into ...Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into various sensors and microfluidics for sensing/monitoring and lab-on-chip applications. We report the fabrication of high sensitivity SAW UV sensors based on piezoelectric （PE） ZnO thin films deposited on glass substrates. The sensors were fabricated and their performances against the post-deposition annealing condition were investigated. It was found that the UV-light sensitivity is improved by more than one order of magnitude after annealing. The frequency response increases significantly and the response becomes much faster. The optimized devices also show a small temperature coefficient of frequency and excellent repeatability and stability, demonstrating its potential for UV-light sensing application.展开更多
An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular r...An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular resolution than the omnidirectional pressure sensor. This paper presents an experimental study of array gain for a conformal acoustic vector sensor array in a practical environment. First, the manifold vector is calculated using the real measured data so that the effects of array mismatches can be minimized. Second, an optimal beamformer with a specific spatial response on the basis of the stable directivity of the ambient noise is designed, which can effectively suppress the ambient noise. Experimental results show that this beamformer for the conformal acoustic vector sensor array provides good signal-to- noise ratio enhancement and is more advantageous than the delay-and-sum and minimum variance distortionless response beamformers.展开更多
Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods su...Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods such as ultrasonic method and pulse current method.However,due to the sensitivity of the acoustic array sensor and the influence of the equipment operation site interference,the acoustic array sensor device for partial discharge type diagnosis by phase resolved partial discharge(PRPD)map might occasionally presents incorrect results,thus affecting the power equipment operation and maintenance strategy.The acoustic array sensor detection device for power equipment developed in this paper applies the array design model of equal-area multi-arm spiral with machine learning fast fourier transform clean(FFT-CLEAN)sound source localization identification algorithm to avoid the interference factors in the noise acquisition system using a single microphone and conventional beam forming algorithm,improves the spatial resolution of the acoustic array sensor device,and proposes an acoustic array sensor device based on the acoustic spectrogram.The analysis and diagnosis method of discharge type of acoustic array sensor device can effectively reduce the system misjudgment caused by factors such as the resolution of the acoustic imaging device and the time domain pulse of the digital signal,and reduce the false alarm rate of the acoustic array sensor device.The proposed method is tested by selecting power cables as the object,and its effectiveness is proved by laboratory verification and field verification.展开更多
Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the ampli...Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the amplitude and phase information of the pressure and particle velocity,they possess a number of advantages over traditional scalar sensors.Signal-to-noise ratio (SNR) gain (which is often called array gain) is one of such advantages and is always interested by all of us.But it is not unchangeable if the spatial correlation of the noise field varies.Much more important,it is difficult to be given if the noise becomes complex.In this paper,spatial correlation of the vector field of isotropic volume-noise and surface-generated noise has been introduced briefly.Based on the results,the combined SNR output of a vector linear array is investigated and the maximum gain is given in the specified noise.Computer simulation shows that the output of one array in the same noise is not the same in different gestures.And then we find the best gesture through SNR calculation and obtain the biggest gain,which has important meaning to guide how to deploy an array in practice.We also should use the array with respect to the characteristics of the real ambient noise,especially in anisotropic noise field.展开更多
Underwater Acoustic Sensor Network(UASN) has attracted significant attention because of its great influence on ocean exploration and monitoring. On account of the unique characteristics of underwater environment, loca...Underwater Acoustic Sensor Network(UASN) has attracted significant attention because of its great influence on ocean exploration and monitoring. On account of the unique characteristics of underwater environment, localization, as one of the fundamental tasks in UASNs, is a more challenging work than in terrestrial sensor networks. A survey of the ranging algorithms and the network architectures varied with different applications in UASNs is provided in this paper. Algorithms used to estimate the coordinates of the UASNs nodes are classified into two categories: rangebased and range-free. In addition, we analyze the architectures of UASNs based on different applications, and compare their performances from the aspects of communication cost, accuracy, coverage and so on. Open research issues which would affect the accuracy of localization are also discussed, including MAC protocols, sound speed and time synchronization.展开更多
ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Ra...ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Rayleigh wave are used for fabrications of humidity sensors, which are excited in [1100] and [0001] directions of the （1120） ZnO piezoelectric films, respectively. The experimental results show that both kinds of sensors have good humidity response and repeatability, and the performances of the Love wave sensors are better than those of the Rayleigh wave sensors at room temperature. Moreover, the theoretical calculations of the mass sensitivity of the sensors are a/so carried out and the calculated results are in good agreement with the experimental measurements.展开更多
With the increasing demand for marine exploration, underwater acoustic sensor networks (UASNs) are prone to have the characteristics of large-scale, long term monitoring, and high data traffic load. Underwater media a...With the increasing demand for marine exploration, underwater acoustic sensor networks (UASNs) are prone to have the characteristics of large-scale, long term monitoring, and high data traffic load. Underwater media access control (MAC) protocols, which allow multiple users to share the common medium fairly and efficiently, are essential for the performance of UASNs. However, the design of MAC protocols is confronted with the challenges of spatial unfairness, data eruption, and low energy efficiency. In this paper, we propose a novel data concurrent transmission (DCT) MAC protocol, which is able to exploit long propagation delay and conduct concurrent transmission. Specifically, we present the theoretical performance analysis of the proposed MAC protocol in detail and give an analytical solution of the success concurrent transmission probability between nodes. In addition, simulation results are provided to demonstrate that our proposed protocol is appropriate for UASNs and can significantly improve the performance in terms of network throughput and energy consumption. Finally, we give some typical future applications of UASNs and discuss the demands on MAC protocol design.展开更多
This paper considers an underwater acoustic sensor network with one mobile surface node to collect data from multiple underwater nodes,where the mobile destination requests retransmission from each underwater node ind...This paper considers an underwater acoustic sensor network with one mobile surface node to collect data from multiple underwater nodes,where the mobile destination requests retransmission from each underwater node individually employing traditional automatic-repeat-request(ARQ) protocol.We propose a practical node cooperation(NC) protocol to enhance the collection efficiency,utilizing the fact that underwater nodes can overhear the transmission of others.To reduce the source level of underwater nodes,the underwater data collection area is divided into several sub-zones,and in each sub-zone,the mobile surface node adopting the NC protocol could switch adaptively between selective relay cooperation(SRC) and dynamic network coded cooperation(DNC) .The difference of SRC and DNC lies in whether or not the selected relay node combines the local data and the data overheard from undecoded node(s) to form network coded packets in the retransmission phase.The NC protocol could also be applied across the sub-zones due to the wiretap property.In addition,we investigate the effects of different mobile collection paths,collection area division and cooperative zone design for energy saving.The numerical results showthat the proposed NC protocol can effectively save energy compared with the traditional ARQ scheme.展开更多
Cooperative jamming(CJ)is one of the important methods to solve security problems of underwater acoustic sensor networks(UASNs).In this paper,we propose a Cooperative Jamming Scheme based on Node Authentication for UA...Cooperative jamming(CJ)is one of the important methods to solve security problems of underwater acoustic sensor networks(UASNs).In this paper,we propose a Cooperative Jamming Scheme based on Node Authentication for UASNs to improve the effect of CJ by selecting suitable jamming source for found illegal nodes.In the node authentication,all nodes will be identified by their trust value(TV).TV is calculated according to three types of evidence:channel-based trust evidence,behavior-based trust evidence and energy-based trust evidence.Besides,to deal with cases where legal nodes may be suspected,the historical TV and trust redemption will be considered when calculating TV.In cooperative jamming,according to the link quality,several nodes are selected to jam illegal nodes.Both simulation and field experiment show that the proposed scheme can accurately find the illegal nodes in the time-vary channel and improve the security of the network.展开更多
Underwater sensor network can achieve the unmanned environmental monitoring and military monitoring missions.Underwater acoustic sensor node cannot rely on the GPS to position itself,and the traditional indirect posit...Underwater sensor network can achieve the unmanned environmental monitoring and military monitoring missions.Underwater acoustic sensor node cannot rely on the GPS to position itself,and the traditional indirect positioning methods used in Ad Hoc networks are not fully applicable to the localization of underwater acoustic sensor networks.In this paper,we introduce an improved underwater acoustic network localization algorithm.The algorithm processes the raw data before localization calculation to enhance the tolerance of random noise.We reduce the redundancy of the calculation results by using a more accurate basic algorithm and an adjusted calculation strategy.The improved algorithm is more suitable for the underwater acoustic sensor network positioning.展开更多
One-port magnetic surface acoustic wave(MSAW) resonators are fabricated by stacking multilayered(FeCoSiB/SiO2)n films directly on top of interdigital electrodes. It is shown that the magneto-acoustic response of the M...One-port magnetic surface acoustic wave(MSAW) resonators are fabricated by stacking multilayered(FeCoSiB/SiO2)n films directly on top of interdigital electrodes. It is shown that the magneto-acoustic response of the MSAW resonators critically depends the hysteresis of △E effect. For the magnetic multilayer without induced magnetic anisotropy, the resonance frequency( fR) exhibits a butterfly-like dependence on the external field, therefore, enabling bipolar detection of magnetic field smaller than its coercive field. However, for the magnetic multilayers with induced magnetic anisotropy, butterfly-like or loop-like fR–H curves are measured along the interdigtial electrode fingers or the SAW propagation direction, which can be attributed to the competition between the magnetic field-induced anisotropy and the stress-induced or shape anisotropy.展开更多
This work proposes an innovative approach to evaluate the functional characteristics of a heterogeneous underwater wireless acoustic sensor network(UWASN)using a stochastic model and the network connectivity criterion...This work proposes an innovative approach to evaluate the functional characteristics of a heterogeneous underwater wireless acoustic sensor network(UWASN)using a stochastic model and the network connectivity criterion.The connectivity criterion is probabilistic and considers inherently distinct groups of parameters:technical parameters that determine the network function at specific levels of the communication stack and physical parameters that describe the environment in the water area.The proposed approach enables researchers to evaluate the network characteristics in terms of energy efficiency and reliability while considering specific network and environmental parameters.Moreover,this approach is a simple and convenient tool for analyzing the effectiveness of protocols in various open systems interconnection model levels.It is possible to assess the potential capabilities of any protocol and include it in the proposed model.This work presents the results of modeling the critical characteristics of heterogeneous three-dimensional UWASNs of different scales consisting of stationary sensors and a wave glider as a mobile gateway,using specific protocols as examples.Several alternative routes for the wave glider are considered to optimize the network’s functional capabilities.Optimal trajectories of the wave glider’s movement have been determined in terms of ensuring the efficiency and reliability of the hybrid UWASN at various scales.In the context of the problem,an evaluation of different reference node placement was to ensure message transmission to a mobile gateway.The best location of reference nodes has been found.展开更多
The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sens...The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.展开更多
基金Project supported by the IACAS Young Elite Researcher Project(Grant No.QNYC201703)the Rising Star Foundation of Integrated Research Center for Islands and Reefs Sciences,CAS(Grant No.ZDRW-XH-2021-2-04)the Key Laboratory Foundation of Acoustic Science and Technology(Grant No.2021-JCJQ-LB-066-08).
文摘Acoustic scattering modulation caused by an undulating sea surface on the space-time dimension seriously affects underwater detection and target recognition.Herein,underwater acoustic scattering modulation from a moving rough sea surface is studied based on integral equation and parabolic equation.And with the principles of grating and constructive interference,the mechanism of this acoustic scattering modulation is explained.The periodicity of the interference of moving rough sea surface will lead to the interference of the scattering field at a series of discrete angles,which will form comb-like and frequency-shift characteristics on the intensity and the frequency spectrum of the acoustic scattering field,respectively,which is a high-order Bragg scattering phenomenon.Unlike the conventional Doppler effect,the frequency shifts of the Bragg scattering phenomenon are multiples of the undulating sea surface frequency and are independent of the incident sound wave frequency.Therefore,even if a low-frequency underwater acoustic field is incident,it will produce obvious frequency shifts.Moreover,under the action of ideal sinusoidal waves,swells,fully grown wind waves,unsteady wind waves,or mixed waves,different moving rough sea surfaces create different acoustic scattering processes and possess different frequency shift characteristics.For the swell wave,which tends to be a single harmonic wave,the moving rough sea surface produces more obvious high-order scattering and frequency shifts.The same phenomena are observed on the sea surface under fully grown wind waves,however,the frequency shift slightly offsets the multiple peak frequencies of the wind wave spectrum.Comparing with the swell and fully-grown wind waves,the acoustic scattering and frequency shift are not obvious for the sea surface under unsteady wind waves.
基金supported in part by the National Natural Science Foundation of China under Grant 62171187the Guangdong Basic and Applied Basic Research Foundation under Grant 2022A1515011476+1 种基金the Science and Technology Program of Guangzhou under Grant 201904010373the Key Program of Marine Economy Development (Six Marine Industries) Special Foundation of Department of Natural Resources of Guangdong Province (GDNRC [2020]009)。
文摘Wireless information and power transfer(WIPT) enables simultaneously communications and sustainable power supplement without the erection of power supply lines and the replacement operation of the batteries for the terminals. The application of WIPT to the underwater acoustic sensor networks(UWASNs) not only retains the long range communication capabilities, but also provides an auxiliary and convenient energy supplement way for the terminal sensors, and thus is a promising scheme to solve the energy-limited problem for the UWASNs. In this paper, we propose the integration of WIPT into the UWASNs and provide an overview on various enabling techniques for the WIPT based UWASNs(WIPT-UWASNs) as well as pointing out future research challenges and opportunities for WIPT-UWASNs.
基金supported by the National Natural Science Foundation of China(Grant Nos.12174197,11874222,and 12027808)。
文摘Broadband absorption of low-frequency sound waves via a deep subwavelength structure is of great and ongoing interest in research and engineering.Here,we numerically and experimentally present a design of a broadband lowfrequency absorber based on an acoustic metaporous composite(AMC).The AMC absorber is constructed by embedding a single metamaterial resonator into a porous layer.The finite element simulations show that a high absorption(absorptance A>0.8)can be achieved within a broad frequency range(from 290 Hz to 1074 Hz),while the thickness of AMC is 1/13of the corresponding wavelength at 290 Hz.The broadband and high-efficiency performances of the absorber are attributed to the coupling between the two resonant absorptions and the trapped mode.The numerical simulations and experimental results are obtained to be in good agreement with each other.Moreover,the high broadband absorption can be maintained under random incident acoustic waves.The proposed absorber provides potential applications in low-frequency noise reduction especially when limited space is demanded.
文摘The passive acoustic localization with planar sensor array is introduced. Based on a method to eliminate the influence of effective sound velocity in passive detection, a new five-sensors solid array and its localization model are put forward. The factors that influence the precision of the localization are analyzed. Considering the errors from the factors synchronously, the simulation compares the solid array with the planar array. It can be proved that the five-sensor solid array is better than the four-sensor planar array in the estimation of bearing elements.
基金supported by the National Natural Science Foundation of China(Grant Nos.61274037 and 61301046)the Research Fund for the Doctoral Program of Higher Education of China(Grant Nos.20120101110031 and 20120101110054)
文摘Surface acoustic wave （SAW） resonators are a type of ultraviolet （UV） light sensors with high sensitivity, and they have been extensively studied. Transparent SAW devices are very useful and can be developed into various sensors and microfluidics for sensing/monitoring and lab-on-chip applications. We report the fabrication of high sensitivity SAW UV sensors based on piezoelectric （PE） ZnO thin films deposited on glass substrates. The sensors were fabricated and their performances against the post-deposition annealing condition were investigated. It was found that the UV-light sensitivity is improved by more than one order of magnitude after annealing. The frequency response increases significantly and the response becomes much faster. The optimized devices also show a small temperature coefficient of frequency and excellent repeatability and stability, demonstrating its potential for UV-light sensing application.
基金Project supported by the China Postdoctoral Science Foundation(Grant No.2016M592782)the National Natural Science Foundation of China(Grant Nos.11274253 and 11604259)
文摘An acoustic vector sensor can measure the components of particle velocity and the acoustic pressure at the same point simultaneously, which provides a larger array gain against the ambient noise and a higher angular resolution than the omnidirectional pressure sensor. This paper presents an experimental study of array gain for a conformal acoustic vector sensor array in a practical environment. First, the manifold vector is calculated using the real measured data so that the effects of array mismatches can be minimized. Second, an optimal beamformer with a specific spatial response on the basis of the stable directivity of the ambient noise is designed, which can effectively suppress the ambient noise. Experimental results show that this beamformer for the conformal acoustic vector sensor array provides good signal-to- noise ratio enhancement and is more advantageous than the delay-and-sum and minimum variance distortionless response beamformers.
基金This work was supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52090020007F)National Key R&D Program of China(2017YFB0902800).
文摘Acoustic array sensor device for partial discharge detection is widely used in power equipment inspection with the advantages of non-contact and precise positioning compared with partial discharge detection methods such as ultrasonic method and pulse current method.However,due to the sensitivity of the acoustic array sensor and the influence of the equipment operation site interference,the acoustic array sensor device for partial discharge type diagnosis by phase resolved partial discharge(PRPD)map might occasionally presents incorrect results,thus affecting the power equipment operation and maintenance strategy.The acoustic array sensor detection device for power equipment developed in this paper applies the array design model of equal-area multi-arm spiral with machine learning fast fourier transform clean(FFT-CLEAN)sound source localization identification algorithm to avoid the interference factors in the noise acquisition system using a single microphone and conventional beam forming algorithm,improves the spatial resolution of the acoustic array sensor device,and proposes an acoustic array sensor device based on the acoustic spectrogram.The analysis and diagnosis method of discharge type of acoustic array sensor device can effectively reduce the system misjudgment caused by factors such as the resolution of the acoustic imaging device and the time domain pulse of the digital signal,and reduce the false alarm rate of the acoustic array sensor device.The proposed method is tested by selecting power cables as the object,and its effectiveness is proved by laboratory verification and field verification.
基金Supported by the National Natural Science Foundation of China under Grant No.50909028
文摘Acoustic vector sensor consists of pressure and particle velocity sensors,which measure the three-dimensional acoustic particle velocity,as well as the pressure at one location at the same time.By preserving the amplitude and phase information of the pressure and particle velocity,they possess a number of advantages over traditional scalar sensors.Signal-to-noise ratio (SNR) gain (which is often called array gain) is one of such advantages and is always interested by all of us.But it is not unchangeable if the spatial correlation of the noise field varies.Much more important,it is difficult to be given if the noise becomes complex.In this paper,spatial correlation of the vector field of isotropic volume-noise and surface-generated noise has been introduced briefly.Based on the results,the combined SNR output of a vector linear array is investigated and the maximum gain is given in the specified noise.Computer simulation shows that the output of one array in the same noise is not the same in different gestures.And then we find the best gesture through SNR calculation and obtain the biggest gain,which has important meaning to guide how to deploy an array in practice.We also should use the array with respect to the characteristics of the real ambient noise,especially in anisotropic noise field.
基金supported by National Natural Science Foundation of China under Grants 61001067,61371093and 61172105Natural Science Foundation of Zhejiang Prov.China under Grants LY13D060001
文摘Underwater Acoustic Sensor Network(UASN) has attracted significant attention because of its great influence on ocean exploration and monitoring. On account of the unique characteristics of underwater environment, localization, as one of the fundamental tasks in UASNs, is a more challenging work than in terrestrial sensor networks. A survey of the ranging algorithms and the network architectures varied with different applications in UASNs is provided in this paper. Algorithms used to estimate the coordinates of the UASNs nodes are classified into two categories: rangebased and range-free. In addition, we analyze the architectures of UASNs based on different applications, and compare their performances from the aspects of communication cost, accuracy, coverage and so on. Open research issues which would affect the accuracy of localization are also discussed, including MAC protocols, sound speed and time synchronization.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11174142,11304160 and 11404147the National Basic Research Program of China under Grant No 2012CB921504+2 种基金the PAPD Projectthe Natural Science Foundation of Jiangsu Higher Education Institutions of China under Grant No 13KJB140008the Foundation of Nanjing University of Posts and Telecommunications under Grant No NY213018
文摘ZnO films on R-sapphire substrates are prepared and characterized by x-ray diffraction and scanning electron microscopy, which indicate that the thin films are well crystallized with （1120） texture. Love wave and Rayleigh wave are used for fabrications of humidity sensors, which are excited in [1100] and [0001] directions of the （1120） ZnO piezoelectric films, respectively. The experimental results show that both kinds of sensors have good humidity response and repeatability, and the performances of the Love wave sensors are better than those of the Rayleigh wave sensors at room temperature. Moreover, the theoretical calculations of the mass sensitivity of the sensors are a/so carried out and the calculated results are in good agreement with the experimental measurements.
基金supported in part by the National Natural Science Foundation of China under Grant 62171405in part by the National Science Fund for Distinguished Young Scholars under Grant 62225114
文摘With the increasing demand for marine exploration, underwater acoustic sensor networks (UASNs) are prone to have the characteristics of large-scale, long term monitoring, and high data traffic load. Underwater media access control (MAC) protocols, which allow multiple users to share the common medium fairly and efficiently, are essential for the performance of UASNs. However, the design of MAC protocols is confronted with the challenges of spatial unfairness, data eruption, and low energy efficiency. In this paper, we propose a novel data concurrent transmission (DCT) MAC protocol, which is able to exploit long propagation delay and conduct concurrent transmission. Specifically, we present the theoretical performance analysis of the proposed MAC protocol in detail and give an analytical solution of the success concurrent transmission probability between nodes. In addition, simulation results are provided to demonstrate that our proposed protocol is appropriate for UASNs and can significantly improve the performance in terms of network throughput and energy consumption. Finally, we give some typical future applications of UASNs and discuss the demands on MAC protocol design.
基金supported in part by National Key Research and Development Program of China under Grants No.2016YFC1400200 and 2016YFC1400204National Natural Science Foundation of China under Grants No.41476026,41676024 and 41376040Fundamental Research Funds for the Central Universities of China under Grant No.220720140506
文摘This paper considers an underwater acoustic sensor network with one mobile surface node to collect data from multiple underwater nodes,where the mobile destination requests retransmission from each underwater node individually employing traditional automatic-repeat-request(ARQ) protocol.We propose a practical node cooperation(NC) protocol to enhance the collection efficiency,utilizing the fact that underwater nodes can overhear the transmission of others.To reduce the source level of underwater nodes,the underwater data collection area is divided into several sub-zones,and in each sub-zone,the mobile surface node adopting the NC protocol could switch adaptively between selective relay cooperation(SRC) and dynamic network coded cooperation(DNC) .The difference of SRC and DNC lies in whether or not the selected relay node combines the local data and the data overheard from undecoded node(s) to form network coded packets in the retransmission phase.The NC protocol could also be applied across the sub-zones due to the wiretap property.In addition,we investigate the effects of different mobile collection paths,collection area division and cooperative zone design for energy saving.The numerical results showthat the proposed NC protocol can effectively save energy compared with the traditional ARQ scheme.
基金Supported by the National Natural Science Foundation of China under Grant No.62171310the Marine Defense Innovation Fund JJ-2020-701-09Lanzhou Jiaotong University-Tianjin University Co-Funding under Grant No.2022064。
文摘Cooperative jamming(CJ)is one of the important methods to solve security problems of underwater acoustic sensor networks(UASNs).In this paper,we propose a Cooperative Jamming Scheme based on Node Authentication for UASNs to improve the effect of CJ by selecting suitable jamming source for found illegal nodes.In the node authentication,all nodes will be identified by their trust value(TV).TV is calculated according to three types of evidence:channel-based trust evidence,behavior-based trust evidence and energy-based trust evidence.Besides,to deal with cases where legal nodes may be suspected,the historical TV and trust redemption will be considered when calculating TV.In cooperative jamming,according to the link quality,several nodes are selected to jam illegal nodes.Both simulation and field experiment show that the proposed scheme can accurately find the illegal nodes in the time-vary channel and improve the security of the network.
基金performed in the Project "The Research of Cluster Structure Based Underwater Acoustic Communication Network Topology Algorithm"supported by National Natural Science Foundation of China(No.61101164)
文摘Underwater sensor network can achieve the unmanned environmental monitoring and military monitoring missions.Underwater acoustic sensor node cannot rely on the GPS to position itself,and the traditional indirect positioning methods used in Ad Hoc networks are not fully applicable to the localization of underwater acoustic sensor networks.In this paper,we introduce an improved underwater acoustic network localization algorithm.The algorithm processes the raw data before localization calculation to enhance the tolerance of random noise.We reduce the redundancy of the calculation results by using a more accurate basic algorithm and an adjusted calculation strategy.The improved algorithm is more suitable for the underwater acoustic sensor network positioning.
基金National Natural Science Foundation of China(Grant No.61871081)the National Key Scientific Instrument and Equipment Development Project of China(Grant No.51827802).
文摘One-port magnetic surface acoustic wave(MSAW) resonators are fabricated by stacking multilayered(FeCoSiB/SiO2)n films directly on top of interdigital electrodes. It is shown that the magneto-acoustic response of the MSAW resonators critically depends the hysteresis of △E effect. For the magnetic multilayer without induced magnetic anisotropy, the resonance frequency( fR) exhibits a butterfly-like dependence on the external field, therefore, enabling bipolar detection of magnetic field smaller than its coercive field. However, for the magnetic multilayers with induced magnetic anisotropy, butterfly-like or loop-like fR–H curves are measured along the interdigtial electrode fingers or the SAW propagation direction, which can be attributed to the competition between the magnetic field-induced anisotropy and the stress-induced or shape anisotropy.
基金partially funded by the Ministry of Science and Higher Education of the Russian Federation as a part of World-class Research Center Program:Advanced Digital Technologies(contract No.075-15-2022-312 dated 20 April 2022).
文摘This work proposes an innovative approach to evaluate the functional characteristics of a heterogeneous underwater wireless acoustic sensor network(UWASN)using a stochastic model and the network connectivity criterion.The connectivity criterion is probabilistic and considers inherently distinct groups of parameters:technical parameters that determine the network function at specific levels of the communication stack and physical parameters that describe the environment in the water area.The proposed approach enables researchers to evaluate the network characteristics in terms of energy efficiency and reliability while considering specific network and environmental parameters.Moreover,this approach is a simple and convenient tool for analyzing the effectiveness of protocols in various open systems interconnection model levels.It is possible to assess the potential capabilities of any protocol and include it in the proposed model.This work presents the results of modeling the critical characteristics of heterogeneous three-dimensional UWASNs of different scales consisting of stationary sensors and a wave glider as a mobile gateway,using specific protocols as examples.Several alternative routes for the wave glider are considered to optimize the network’s functional capabilities.Optimal trajectories of the wave glider’s movement have been determined in terms of ensuring the efficiency and reliability of the hybrid UWASN at various scales.In the context of the problem,an evaluation of different reference node placement was to ensure message transmission to a mobile gateway.The best location of reference nodes has been found.
文摘The principle and the constitution of an intelligent system for on-line and real-time montitoring tool cutting state were discussed and a synthetic sensors schedule combined a new type fluid acoustic emission sensor (AE) with motor current sensor was presented. The parallel communication between control system of machine tools, the monitoring intelligent system,and several decision-making systems for identifying tool cutting state was established It can auto - matically select the sensor way ,monitoring mode and identifying method in machining process- ing so as to build a successful and effective intelligent system for on -line and real-time moni- toring cutting tool states in FMS.
