The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high...The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high demands on the accuracy of modeling methods. To address this issue, a novel maneuver laws modeling and analysis method based on higher order multi-resolution dynamic mode decomposition(HMDMD) is proposed in this work. A joint time-space-frequency decomposition of the vehicle's state sequence in the complex flight scenario is achieved with the higher order Koopman assumption and standard multi-resolution dynamic mode decomposition, and an approximate dynamic model is established. The maneuver laws can be reconstructed and analyzed with extracted multi-scale spatiotemporal modes with clear physical meaning. Based on the dynamic model of HGV, two flight scenarios are established with constant angle of attack and complex maneuver laws, respectively. Simulation results demonstrate that the maneuver laws obtained using the HMDMD method are highly consistent with those derived from the real dynamic model, the modeling accuracy is better than other common modeling methods, and the method has strong interpretability.展开更多
Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as ...Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as a model photocathode in this study,and the photogenerated surface charge density,interfacial charge transfer rate constant and their relation to the water reduction rate(in terms of photocurrent)were investigated by a combination of(photo)electrochemical techniques.The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density,and that the photocurrent equals to the product of the charge transfer rate constant and surface charge density.The reaction is first-order in terms of surface charge density.Such an unconventional rate law contrasts with the reports in literature.The charge density-dependent rate constant results from the Fermi level pinning(i.e.,Galvani potential is the main driving force for the reaction)due to accumulation of charge in the surface states and/or Frumkin behavior(i.e.,chemical potential is the main driving force).This study,therefore,may be helpful for further investigation on the mechanism of hydrogen evolution over a CuO photocathode and for designing more efficient CuO-based photocatalysts.展开更多
Focused on the Klinkenberg effect on gas seepage, the independently developed triaxial experimental system of gas seepage was applied to conduct research on the seepage characteristics of coal seam gas. By means of ex...Focused on the Klinkenberg effect on gas seepage, the independently developed triaxial experimental system of gas seepage was applied to conduct research on the seepage characteristics of coal seam gas. By means of experimental data analysis and theoretical derivation, a calculation method of coal seam gas permeability was proposed, which synthesized the respective influences of gas dynamic viscosity, compressibility factor and Klinkenberg effect. The study results show that the Klinkenberg effect has a significant influence on the coal seam gas seepage, the permeability estimated with the method considering the Klinkenberg effect is correct, and this permeability can fully reflect the true seepage state of the gas. For the gas around the standard conditions, the influences of dynamic viscosity and compressibility factor on the permeability may be ignored. For the gas deviating far away from the standard conditions, the influences of dynamic viscosity and compressibility factor on the permeability must be considered. The research results have certain guiding significance in forming a correct understanding of the Klinkenberg effect and selecting a more accurate calculation method for the permeability of coal containing gas.展开更多
As each type of satellite network has different link features, its data transmission must be designed based on its link features to improve the efficiency of data transferring. The transmission of navigation integrate...As each type of satellite network has different link features, its data transmission must be designed based on its link features to improve the efficiency of data transferring. The transmission of navigation integrated services information （NISI） in a global navigation satellite system （GNSS） with inter-satellite links （ISLs） is studied by taking the real situation of inter-satellite communication links into account. An on-demand computing and buffering centralized route strategy is proposed based on dynamic grouping and the topology evolution law of the GNSS network within which the satellite nodes are operated in the manner of dynamic grouping. Dynamic grouping is based on satellites spatial relationships and the group role of the satellite node changes by turns due to its spatial relationships. The route strategy provides significant advantages of high efficiency, low complexity, and flexi- ble configuration, by which the established GNSS can possess the features and capabilities of feasible deployment, efficient transmission, convenient management, structural invulnerability and flexible expansion.展开更多
A trajectory shaping guidance law based on virtua angle （TSGLBVA） is proposed for a re-entry vehicle with the constraints of terminal impact angles and their time derivatives. In the view of differential properties ...A trajectory shaping guidance law based on virtua angle （TSGLBVA） is proposed for a re-entry vehicle with the constraints of terminal impact angles and their time derivatives. In the view of differential properties of the maneuvering trajectory, a virtual angle and a virtual radius are defined. Also, the shaping trajectory of the vehicle is established by the polynomials of the virtual angle. Then, four optimized parameters are selected according to the theorem of parameters transformation presented in this paper. Finally, a convergent variant of the Nelder-Mead algorithm is adopted to obtain the reference trajectory, and a trajectory feedback tracking guidance law is designed. The simulation results demonstrate that the TSGLBVA ensures the re-entry vehicle to impact a target precisely from a specified direction with smal terminal load factor command, as well as to obtain a maximum or constrained terminal velocity according to various requirements.展开更多
The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation o...The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation of guidance systems into the feedbackable linearization model, in which the guidance law is obtained without considering the impact angle via FLC. For the purpose of the line of sight(LOS) angle and its rate converging to the desired values, the second-order LOS angle is considered as a double-integral system. Then, this paper utilizes FTC to design a controller which can guarantee the states of the double-integral system converging to the desired values. Numerical simulation illustrates the performance of the IACG, in contrast to the existing guidance law.展开更多
This paper analyses the issue of impact time control of super-cavitation weapons impact fixed targets which mainly refer to the ships or submarines who lost power, but still have combat capability. Control over impact...This paper analyses the issue of impact time control of super-cavitation weapons impact fixed targets which mainly refer to the ships or submarines who lost power, but still have combat capability. Control over impact time constraints of guidance law(ITCG) is derived by using sliding mode control(SMC) and Lyapunov stability theorem. The expected impact time is realized by using the notion of attack process and estimated time-to-go to design sliding mode surface(SMS). ITCG contains equivalent and discontinuous guidance laws, once state variables arrive at SMS,the equivalent guidance law keeps the state variables on SMS,then the discontinuous guidance law enforces state variables to move and reach SMS. The singularity problem of ITCG is also analyzed. Theoretical analysis and numerical simulation results are given to test the effectiveness of ITCG designed in this paper.展开更多
The calculation model was established by k-ε turbulence stress which reflects the change of indoor gas leak's volume fraction,and the CFD software was used to numerically simulate the volume fraction of gas after...The calculation model was established by k-ε turbulence stress which reflects the change of indoor gas leak's volume fraction,and the CFD software was used to numerically simulate the volume fraction of gas after the gas of continuity leakage,at the same time the changes of gas leak were studied. The results show that the process of gas leakage is different with the change of conditions of indoor and outdoor. Because of the different influencing factors,when the gas leak reaches a certain stable value,the volume fraction,velocity and the explosion of regional are different in the same state indoor. In some regions the gas will explode which meets the fire even if the mean volume fraction of the gas cannot achieve the explosion limit.展开更多
Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function...Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.展开更多
Final velocity and impact angle are critical to missile guidance.Computationally efficient guidance law with compre-hensive consideration of the two performance merits is challeng-ing yet remains less addressed.Theref...Final velocity and impact angle are critical to missile guidance.Computationally efficient guidance law with compre-hensive consideration of the two performance merits is challeng-ing yet remains less addressed.Therefore,this paper seeks to solve a type of optimal control problem that maximizes final velocity subject to equality point constraint of impact angle con-straint.It is proved that the crude problem of maximizing final velocity is equivalent to minimizing a quadratic-form cost of cur-vature.The closed-form guidance law is henceforth derived using optimal control theory.The derived analytical guidance law coincides with the widely-used optimal guidance law with impact angle constraint(OGL-IAC)with a set of navigation parameters of two and six.On this basis,the optimal emission angle is determined to further increase the final velocity.The derived optimal value depends solely on the initial line-of-sight angle and impact angle constraint,and thus practical for real-world appli-cations.The proposed guidance law is validated by numerical simulation.The results show that the OGL-IAC is superior to the benchmark guidance laws both in terms of final velocity and missing distance.展开更多
By employing function one-direction S-rough sets and rough law generation method based on function S-rough sets, ^-f-decomposition law and ^-F-decomposition rough law are proposed, and the measurement of rough law var...By employing function one-direction S-rough sets and rough law generation method based on function S-rough sets, ^-f-decomposition law and ^-F-decomposition rough law are proposed, and the measurement of rough law variation in the process of rough law ^-F-decomposition is researched. The concepts of law energy and attdbute ^-f-interference degree are presented, which make the variation of rough law become measurable. ^-f-decomposition law energy characteristic theorem, ^-f- decomposition law energy inequality theorem, ^-F-decomposition rough law energy characteristic theorem, and ^-f-decomposition law energy mean value theorem are presented.展开更多
In this paper, a trajectory shaping guidance law,which considers constraints of field-of-view(FOV) angle, impact angle, and terminal lateral acceleration, is proposed for a constant speed missile against a stationary ...In this paper, a trajectory shaping guidance law,which considers constraints of field-of-view(FOV) angle, impact angle, and terminal lateral acceleration, is proposed for a constant speed missile against a stationary target. First, to decouple constraints of the FOV angle and the terminal lateral acceleration, the third-order polynomial with respect to the line-ofsight(LOS) angle is introduced. Based on an analysis of the relationship between the looking angle and the guidance coefficient,the boundary of the coefficient that satisfies the FOV constraint is obtained. The terminal guidance law coefficient is used to guarantee the convergence of the terminal conditions. Furthermore, the proposed law can be implemented under bearingsonly information, as the guidance command does not involve the relative range and the LOS angle rate. Finally, numerical simulations are performed based on a kinematic vehicle model to verify the effectiveness of the guidance law. Overall, the work offers an easily implementable guidance law with closed-form guidance gains, which is suitable for engineering applications.展开更多
This paper presents a combination of experimental and numerical investigations on the dynamic response of scaling cabin structures under internal blast loading.The purpose of this study is to modify the similar relati...This paper presents a combination of experimental and numerical investigations on the dynamic response of scaling cabin structures under internal blast loading.The purpose of this study is to modify the similar relationship between the scaled-down model and the prototype of the cabin structures under internal blast loading.According to the Hopkinson’s scaling law,three sets of cabin structure models with different scaling factors combined with different explosive masses were designed for the experimental study.The dynamic deformation process of the models was recorded by a three-dimensional digital imaging correlation(DIC)method and a 3D scanning technology was used to reconstruct the deformation modes of the specimen.In addition,a finite element model was developed for the modification of the scaling law.The experimental results showed that the final deflection-to-thickness ratio was increased with the increase of the model size despite of the similar trend of their deformation processes.The reason for this inconsistency was discussed based on the traditional scaling law and a modified formula considering of the effects of size and strain-rate was provided.展开更多
A new code concept is used for the L1 civil（L1C） signal of the global positioning system（GPS）.The generation of L1C codes is quite different from the generation of traditional ranging codes.Thus,it is necessary to...A new code concept is used for the L1 civil（L1C） signal of the global positioning system（GPS）.The generation of L1C codes is quite different from the generation of traditional ranging codes.Thus,it is necessary to find a method for the correct generation to pave the way for future research.L1C codes are based on only one Legendre sequence which consists of Legendre symbols.To calculate these Legendre symbols,the Euler criterion is always used to evaluate quadratic residues.However,due to the great length of L1C codes,this procedure causes overflow problems.Therefore,the quadratic reciprocity law,some related theorems and properties are introduced to solve the problems.Moreover,if the quadratic reciprocity law,some related theorems and properties are used to calculate different Legendre symbols,the combination modes may vary,which causes a complex generation process.The proposed generation method deals with this complex generation process effectively.In addition,through simulations,it is found that the autocorrelation features of obtained Legendre sequences and L1C codes are in accordance with theoretical results,which proves the correctness of the proposed method.展开更多
Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,ar...Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,are hardly to be explained by the conventional method.The scientific understanding of water effects during impoundment and their hazards to hydraulic structure are needed.The effective stress law for fissured rock masses is introduced in the elasto-plastic model employing the Drucker-Prager criterion and implemented in the three dimension(3D)nonlinear finite element method(FEM)program Three-dimensional FINite Element(TFINE).The slope deforms towards river-way during impoundment since the increasing pore pressure in fissures changes stress state and leads to additional plastic deformation in the rock materials.The value of Biot coefficient and the influence of water on rock materials are discussed in detail.Thus,the mechanism of slope deformation during the impoundment of Jinping-I arch dam is revealed,and the deformation is accurately measured.The application of the effective stress law provides a method to consider stress assessment,deformation evaluation and stability estimate of hydraulic structures during the impoundment process.This is a beneficial exploration and an improvement of hydraulic engineering design.展开更多
This paper,using pseudo-conservation laws in cyclic-service systems, derives some expressions for the weighted sum of the mean waiting time token ring networks with exhaustive limitedservice policies on condition that...This paper,using pseudo-conservation laws in cyclic-service systems, derives some expressions for the weighted sum of the mean waiting time token ring networks with exhaustive limitedservice policies on condition that messages arrived with batch Poisson, and discusses boundary conditions. At the same time, the results of the token ring network with exhaustive and non-exhaustiveservice strategy are obtained. Finally the exact expression of mean waiting time in symmetric ringnetwork with same service strategy is given.展开更多
Recently,foamed polymers have been widely used in the repair of underground engineering disasters by grouting(trenchless technology)due to controllable gelation time and self-expansion.However,the grouting process bec...Recently,foamed polymers have been widely used in the repair of underground engineering disasters by grouting(trenchless technology)due to controllable gelation time and self-expansion.However,the grouting process becomes more complicated due to the complex geological conditions and the self-expansion of slurry.Therefore,this paper adopts a self-made visual experimental device with peripheral pressure and water plugging rate(WPR)monitoring functions to study the influence of main influencing parameters(particle size distribution,grouting amount and dynamic water pump pressure(DWPP))on the spatiotemporal distribution of slurry WPR and diffusion dynamic response(peripheral pressure).The results show that:When grouting amount is 563 g and DWPP is 0.013 MPa,the expansion force of the slurry in the diffusion process is dominant and can significantly change the local sand and gravel skeleton structure.When grouting amount is 563 g,DWPP is 0.013 MPa,and particle size distribution type isⅢ,the flow time of the polymer is shortened,the pores of the gravel are rapidly blocked.Then,the peripheral pressure decreases rapidly with the increase of the distance,and the time to reach the inflection point WPR is shortened.The instantaneous blockage of the pores leads to the delayed transmission of flow field blockage information.展开更多
基金supported by the National Natural Science Foundation of China (Grant No. 12302056)the Postdoctoral Fellowship Program of CPSF:GZC20233445。
文摘The precise characterization of hypersonic glide vehicle(HGV) maneuver laws in complex flight scenarios still faces challenges. Non-stationary changes in flight state due to abrupt changes in maneuver modes place high demands on the accuracy of modeling methods. To address this issue, a novel maneuver laws modeling and analysis method based on higher order multi-resolution dynamic mode decomposition(HMDMD) is proposed in this work. A joint time-space-frequency decomposition of the vehicle's state sequence in the complex flight scenario is achieved with the higher order Koopman assumption and standard multi-resolution dynamic mode decomposition, and an approximate dynamic model is established. The maneuver laws can be reconstructed and analyzed with extracted multi-scale spatiotemporal modes with clear physical meaning. Based on the dynamic model of HGV, two flight scenarios are established with constant angle of attack and complex maneuver laws, respectively. Simulation results demonstrate that the maneuver laws obtained using the HMDMD method are highly consistent with those derived from the real dynamic model, the modeling accuracy is better than other common modeling methods, and the method has strong interpretability.
基金the National Basic Research Development of China(2011CB936003)the National Natural Science Foundation of China(50971116)。
文摘Photocatalytic splitting of water over p-type semiconductors is a promising strategy for production of hydrogen.However,the determination of rate law is rarely reported.To this purpose,copper oxide(CuO)is selected as a model photocathode in this study,and the photogenerated surface charge density,interfacial charge transfer rate constant and their relation to the water reduction rate(in terms of photocurrent)were investigated by a combination of(photo)electrochemical techniques.The results showed that the charge transfer rate constant is exponential-dependent on the surface charge density,and that the photocurrent equals to the product of the charge transfer rate constant and surface charge density.The reaction is first-order in terms of surface charge density.Such an unconventional rate law contrasts with the reports in literature.The charge density-dependent rate constant results from the Fermi level pinning(i.e.,Galvani potential is the main driving force for the reaction)due to accumulation of charge in the surface states and/or Frumkin behavior(i.e.,chemical potential is the main driving force).This study,therefore,may be helpful for further investigation on the mechanism of hydrogen evolution over a CuO photocathode and for designing more efficient CuO-based photocatalysts.
基金Projects(51104059,51204067)supported by the National Natural Science Foundation of ChinaProject(2012CB723103)supported the National Basic Research Program of China+3 种基金Project(IRT1235)supported by Innovation Team Development Plan of the Ministry of Education of ChinaProject(2013M531674)supported by China Postdoctoral Science FoundationProject(132300413203)supported by Basic and Frontier Technology Research Program of Henan Province,ChinaProject(WS2012B07)supported by the Open Project of State Key Laboratory Cultivation Base for Gas Geology and Gas Control(Henan Polytechnic University),China
文摘Focused on the Klinkenberg effect on gas seepage, the independently developed triaxial experimental system of gas seepage was applied to conduct research on the seepage characteristics of coal seam gas. By means of experimental data analysis and theoretical derivation, a calculation method of coal seam gas permeability was proposed, which synthesized the respective influences of gas dynamic viscosity, compressibility factor and Klinkenberg effect. The study results show that the Klinkenberg effect has a significant influence on the coal seam gas seepage, the permeability estimated with the method considering the Klinkenberg effect is correct, and this permeability can fully reflect the true seepage state of the gas. For the gas around the standard conditions, the influences of dynamic viscosity and compressibility factor on the permeability may be ignored. For the gas deviating far away from the standard conditions, the influences of dynamic viscosity and compressibility factor on the permeability must be considered. The research results have certain guiding significance in forming a correct understanding of the Klinkenberg effect and selecting a more accurate calculation method for the permeability of coal containing gas.
文摘As each type of satellite network has different link features, its data transmission must be designed based on its link features to improve the efficiency of data transferring. The transmission of navigation integrated services information （NISI） in a global navigation satellite system （GNSS） with inter-satellite links （ISLs） is studied by taking the real situation of inter-satellite communication links into account. An on-demand computing and buffering centralized route strategy is proposed based on dynamic grouping and the topology evolution law of the GNSS network within which the satellite nodes are operated in the manner of dynamic grouping. Dynamic grouping is based on satellites spatial relationships and the group role of the satellite node changes by turns due to its spatial relationships. The route strategy provides significant advantages of high efficiency, low complexity, and flexi- ble configuration, by which the established GNSS can possess the features and capabilities of feasible deployment, efficient transmission, convenient management, structural invulnerability and flexible expansion.
文摘A trajectory shaping guidance law based on virtua angle （TSGLBVA） is proposed for a re-entry vehicle with the constraints of terminal impact angles and their time derivatives. In the view of differential properties of the maneuvering trajectory, a virtual angle and a virtual radius are defined. Also, the shaping trajectory of the vehicle is established by the polynomials of the virtual angle. Then, four optimized parameters are selected according to the theorem of parameters transformation presented in this paper. Finally, a convergent variant of the Nelder-Mead algorithm is adopted to obtain the reference trajectory, and a trajectory feedback tracking guidance law is designed. The simulation results demonstrate that the TSGLBVA ensures the re-entry vehicle to impact a target precisely from a specified direction with smal terminal load factor command, as well as to obtain a maximum or constrained terminal velocity according to various requirements.
基金supported by the National Natural Science Foundation of China(51679201)
文摘The impact angle control over guidance(IACG) law against stationary targets is proposed by using feedback linearization control(FLC) and finite time control(FTC). First, this paper transforms the kinematics equation of guidance systems into the feedbackable linearization model, in which the guidance law is obtained without considering the impact angle via FLC. For the purpose of the line of sight(LOS) angle and its rate converging to the desired values, the second-order LOS angle is considered as a double-integral system. Then, this paper utilizes FTC to design a controller which can guarantee the states of the double-integral system converging to the desired values. Numerical simulation illustrates the performance of the IACG, in contrast to the existing guidance law.
基金supported by the National Natural Science Foundation of China(5137917651679201)
文摘This paper analyses the issue of impact time control of super-cavitation weapons impact fixed targets which mainly refer to the ships or submarines who lost power, but still have combat capability. Control over impact time constraints of guidance law(ITCG) is derived by using sliding mode control(SMC) and Lyapunov stability theorem. The expected impact time is realized by using the notion of attack process and estimated time-to-go to design sliding mode surface(SMS). ITCG contains equivalent and discontinuous guidance laws, once state variables arrive at SMS,the equivalent guidance law keeps the state variables on SMS,then the discontinuous guidance law enforces state variables to move and reach SMS. The singularity problem of ITCG is also analyzed. Theoretical analysis and numerical simulation results are given to test the effectiveness of ITCG designed in this paper.
基金Projects(50704041, 50838009, 50678179) supported by the National Natural Science Foundation of ChinaProjects(2006BAJ02A09, 2006BAJ02A13-4) supported by the National Key Technologies R & D Program of China+1 种基金Project(CSTC2008BB6347) supported by the Natural Science Foundation Project of ChongqingProject(20080430752) supported by the Postdoctoral Science Foundation of China
文摘The calculation model was established by k-ε turbulence stress which reflects the change of indoor gas leak's volume fraction,and the CFD software was used to numerically simulate the volume fraction of gas after the gas of continuity leakage,at the same time the changes of gas leak were studied. The results show that the process of gas leakage is different with the change of conditions of indoor and outdoor. Because of the different influencing factors,when the gas leak reaches a certain stable value,the volume fraction,velocity and the explosion of regional are different in the same state indoor. In some regions the gas will explode which meets the fire even if the mean volume fraction of the gas cannot achieve the explosion limit.
文摘Brain tissue is one of the softest parts of the human body,composed of white matter and grey matter.The mechanical behavior of the brain tissue plays an essential role in regulating brain morphology and brain function.Besides,traumatic brain injury(TBI)and various brain diseases are also greatly influenced by the brain's mechanical properties.Whether white matter or grey matter,brain tissue contains multiscale structures composed of neurons,glial cells,fibers,blood vessels,etc.,each with different mechanical properties.As such,brain tissue exhibits complex mechanical behavior,usually with strong nonlinearity,heterogeneity,and directional dependence.Building a constitutive law for multiscale brain tissue using traditional function-based approaches can be very challenging.Instead,this paper proposes a data-driven approach to establish the desired mechanical model of brain tissue.We focus on blood vessels with internal pressure embedded in a white or grey matter matrix material to demonstrate our approach.The matrix is described by an isotropic or anisotropic nonlinear elastic model.A representative unit cell(RUC)with blood vessels is built,which is used to generate the stress-strain data under different internal blood pressure and various proportional displacement loading paths.The generated stress-strain data is then used to train a mechanical law using artificial neural networks to predict the macroscopic mechanical response of brain tissue under different internal pressures.Finally,the trained material model is implemented into finite element software to predict the mechanical behavior of a whole brain under intracranial pressure and distributed body forces.Compared with a direct numerical simulation that employs a reference material model,our proposed approach greatly reduces the computational cost and improves modeling efficiency.The predictions made by our trained model demonstrate sufficient accuracy.Specifically,we find that the level of internal blood pressure can greatly influence stress distribution and determine the possible related damage behaviors.
文摘Final velocity and impact angle are critical to missile guidance.Computationally efficient guidance law with compre-hensive consideration of the two performance merits is challeng-ing yet remains less addressed.Therefore,this paper seeks to solve a type of optimal control problem that maximizes final velocity subject to equality point constraint of impact angle con-straint.It is proved that the crude problem of maximizing final velocity is equivalent to minimizing a quadratic-form cost of cur-vature.The closed-form guidance law is henceforth derived using optimal control theory.The derived analytical guidance law coincides with the widely-used optimal guidance law with impact angle constraint(OGL-IAC)with a set of navigation parameters of two and six.On this basis,the optimal emission angle is determined to further increase the final velocity.The derived optimal value depends solely on the initial line-of-sight angle and impact angle constraint,and thus practical for real-world appli-cations.The proposed guidance law is validated by numerical simulation.The results show that the OGL-IAC is superior to the benchmark guidance laws both in terms of final velocity and missing distance.
基金supported by the Natural Science Foundation of Shandong Province (Y2007H02)
文摘By employing function one-direction S-rough sets and rough law generation method based on function S-rough sets, ^-f-decomposition law and ^-F-decomposition rough law are proposed, and the measurement of rough law variation in the process of rough law ^-F-decomposition is researched. The concepts of law energy and attdbute ^-f-interference degree are presented, which make the variation of rough law become measurable. ^-f-decomposition law energy characteristic theorem, ^-f- decomposition law energy inequality theorem, ^-F-decomposition rough law energy characteristic theorem, and ^-f-decomposition law energy mean value theorem are presented.
基金supported by the Defense Science and Technology Key Laboratory Fund of Luoyang Electro-Optical Equipment Institute,Aviation Industry Corporation of China (6142504200108)。
文摘In this paper, a trajectory shaping guidance law,which considers constraints of field-of-view(FOV) angle, impact angle, and terminal lateral acceleration, is proposed for a constant speed missile against a stationary target. First, to decouple constraints of the FOV angle and the terminal lateral acceleration, the third-order polynomial with respect to the line-ofsight(LOS) angle is introduced. Based on an analysis of the relationship between the looking angle and the guidance coefficient,the boundary of the coefficient that satisfies the FOV constraint is obtained. The terminal guidance law coefficient is used to guarantee the convergence of the terminal conditions. Furthermore, the proposed law can be implemented under bearingsonly information, as the guidance command does not involve the relative range and the LOS angle rate. Finally, numerical simulations are performed based on a kinematic vehicle model to verify the effectiveness of the guidance law. Overall, the work offers an easily implementable guidance law with closed-form guidance gains, which is suitable for engineering applications.
基金the support from the National Natural Science Foundation of China under Grant No. 11902031,No. 11802030 , No. 11802031Beijing Municipal Science and Technology Project Management Approach under No. Z181100004118002
文摘This paper presents a combination of experimental and numerical investigations on the dynamic response of scaling cabin structures under internal blast loading.The purpose of this study is to modify the similar relationship between the scaled-down model and the prototype of the cabin structures under internal blast loading.According to the Hopkinson’s scaling law,three sets of cabin structure models with different scaling factors combined with different explosive masses were designed for the experimental study.The dynamic deformation process of the models was recorded by a three-dimensional digital imaging correlation(DIC)method and a 3D scanning technology was used to reconstruct the deformation modes of the specimen.In addition,a finite element model was developed for the modification of the scaling law.The experimental results showed that the final deflection-to-thickness ratio was increased with the increase of the model size despite of the similar trend of their deformation processes.The reason for this inconsistency was discussed based on the traditional scaling law and a modified formula considering of the effects of size and strain-rate was provided.
基金supported by the National High Technology Research and Development Program of China(863Program)(2011AA110101)the National Basic Research Program of China(973Program)(2009CB724002)
文摘A new code concept is used for the L1 civil（L1C） signal of the global positioning system（GPS）.The generation of L1C codes is quite different from the generation of traditional ranging codes.Thus,it is necessary to find a method for the correct generation to pave the way for future research.L1C codes are based on only one Legendre sequence which consists of Legendre symbols.To calculate these Legendre symbols,the Euler criterion is always used to evaluate quadratic residues.However,due to the great length of L1C codes,this procedure causes overflow problems.Therefore,the quadratic reciprocity law,some related theorems and properties are introduced to solve the problems.Moreover,if the quadratic reciprocity law,some related theorems and properties are used to calculate different Legendre symbols,the combination modes may vary,which causes a complex generation process.The proposed generation method deals with this complex generation process effectively.In addition,through simulations,it is found that the autocorrelation features of obtained Legendre sequences and L1C codes are in accordance with theoretical results,which proves the correctness of the proposed method.
基金Projects(51323014,51479097,51279086)supported by the National Natural Science Foundation of ChinaProject(2016-KY-2)supported by the State Key Laboratory of Hydroscience and Hydraulic Engineering,China
文摘Reservoir impoundment is related to several hydraulic engineering concerns,including irreversible valley contractions,landslides and reservoir-induced earthquakes.However,these phenomena,such as valley contractions,are hardly to be explained by the conventional method.The scientific understanding of water effects during impoundment and their hazards to hydraulic structure are needed.The effective stress law for fissured rock masses is introduced in the elasto-plastic model employing the Drucker-Prager criterion and implemented in the three dimension(3D)nonlinear finite element method(FEM)program Three-dimensional FINite Element(TFINE).The slope deforms towards river-way during impoundment since the increasing pore pressure in fissures changes stress state and leads to additional plastic deformation in the rock materials.The value of Biot coefficient and the influence of water on rock materials are discussed in detail.Thus,the mechanism of slope deformation during the impoundment of Jinping-I arch dam is revealed,and the deformation is accurately measured.The application of the effective stress law provides a method to consider stress assessment,deformation evaluation and stability estimate of hydraulic structures during the impoundment process.This is a beneficial exploration and an improvement of hydraulic engineering design.
文摘This paper,using pseudo-conservation laws in cyclic-service systems, derives some expressions for the weighted sum of the mean waiting time token ring networks with exhaustive limitedservice policies on condition that messages arrived with batch Poisson, and discusses boundary conditions. At the same time, the results of the token ring network with exhaustive and non-exhaustiveservice strategy are obtained. Finally the exact expression of mean waiting time in symmetric ringnetwork with same service strategy is given.
基金Project(2022YFC3801000)supported by the National Key Research and Development Program of ChinaProject(232300421064)supported by the Natural Science Foundation of Henan Province,China+1 种基金Project(241111322700)supported by the Key Research and Development Projects in Henan Province,ChinaProject(52008379)supported by the National Natural Science Foundation of China。
文摘Recently,foamed polymers have been widely used in the repair of underground engineering disasters by grouting(trenchless technology)due to controllable gelation time and self-expansion.However,the grouting process becomes more complicated due to the complex geological conditions and the self-expansion of slurry.Therefore,this paper adopts a self-made visual experimental device with peripheral pressure and water plugging rate(WPR)monitoring functions to study the influence of main influencing parameters(particle size distribution,grouting amount and dynamic water pump pressure(DWPP))on the spatiotemporal distribution of slurry WPR and diffusion dynamic response(peripheral pressure).The results show that:When grouting amount is 563 g and DWPP is 0.013 MPa,the expansion force of the slurry in the diffusion process is dominant and can significantly change the local sand and gravel skeleton structure.When grouting amount is 563 g,DWPP is 0.013 MPa,and particle size distribution type isⅢ,the flow time of the polymer is shortened,the pores of the gravel are rapidly blocked.Then,the peripheral pressure decreases rapidly with the increase of the distance,and the time to reach the inflection point WPR is shortened.The instantaneous blockage of the pores leads to the delayed transmission of flow field blockage information.
