Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-s...Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.展开更多
In recent years,the development and research of electrochemical energy storage systems that can efficiently transform chemical energy into electrical energy with a long service life have become a key area of study.Sod...In recent years,the development and research of electrochemical energy storage systems that can efficiently transform chemical energy into electrical energy with a long service life have become a key area of study.Sodium-ion batteries,leveraging their chemical similarity to lithium-ion batteries,along with their abundant resources and low cost,are seen as a viable alternative to lithium-ion batteries.Additionally,all-solid-state sodium-ion batteries have drawn significant attention due to safety considerations.Among the solid electrolytes for all-solid-state sodium-ion batteries,the NASICON solid-state electrolyte emerges as one of the most promising choices for sodium battery solid electrolytes.However,to date,there has not been a comprehensive review summarizing the existing problems of NASICON electrolyte materials and the corresponding specific modification methods.This review simply summarizes the present issues of NASICON for all-solid-state sodium-ion batteries,such as,the low ionic conductivity,the poor interface stability and compatibility,and the dendrite formation.Then,the corresponding solutions to address these issues are discussed,including the ion doping,the interface modification,the sintering parameters optimization,and the composite electrolytes regulation.Finally,the perspectives of NASICON solid-state electrolyte are discussed.展开更多
A polymer electrolyte based on poly(vinylidene) fluoride-hexafluoropropylene was prepared by evaporating the solvent of dimethyl formamide, and non-woven fabric was used to reinforce the mechanical strength of polymer...A polymer electrolyte based on poly(vinylidene) fluoride-hexafluoropropylene was prepared by evaporating the solvent of dimethyl formamide, and non-woven fabric was used to reinforce the mechanical strength of polymer electrolyte and maintain a good interfacial property between the polymer electrolyte and electrodes. Polymer lithium batteries were assembled by using LiCoO2 as cathode material and lithium foil as anode material. Scanning electron microscopy, alternating current impedance, linear sweep voltammetry and charge-discharge tests were used to study the properties of polymer membrane and polymer Li-ion batteries. The results show that the technics of preparing polymer electrolyte by directly evaporating solvent is simple. The polymer membrane has rich micro-porous structure on both sides and exhibits 280% uptake of electrolyte solution. The electrochemical stability window of this polymer electrolyte is about 5.5 V, and its ionic conductivity at room temperature reaches 0.151 S/m. The polymer lithium battery displays an initial discharge capacity of 138 mA·h/g and discharge plateau of about 3.9 V at 0.2 current rate. After 30 cycles, its loss of discharge capacity is only 2%. When the battery discharges at 0.5 current rate, the voltage plateau is still 3.7 V. The discharge capacities of 0.5 and 1.0 current rates are 96% and 93% of that of 0.1 current rate, respectively.展开更多
Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and con...Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and condensation reaction of Si(OC4H9)4. The crystallinity,morphology and ionic conductivity of composite polymer electrolyte films were examined by differential scanning calorimetry,scanning electron microscopy,atom force microscopy and alternating current impedance spectroscopy,respectively. Compared with the crystallinity of the unmodified SiO2 as inert filler,that of composite polymer electrolytes is decreased. The results show that silane-modified SiO2 particles are uniformly dispersed in (PEO)8LiClO4 composite polymer electrolyte film and the addition of silane-modified SiO2 increases the ionic conductivity of the (PEO)8LiClO4 more noticeably. When the mass fraction of SiO2 is about 10%,the conductivity of (PEO)8LiClO4-modified SiO2 attains a maximum value of 4.8×10-5 S·cm-1.展开更多
文摘Practical application of Na3SbS4(NSS)solid-state electrolyte in sodium metal batteries has been significantly hindered by poor interfacial stability and insufficient ionic conductivity.In this study,a series of dual-site doped Na_(3-2x)Sb_(1-x)W_(x)S_(4-x)F_(x)(x=0,0.12,0.24,0.36)electrolytes through high-energy ball milling followed by high-temperature sintering is prepared,where tungsten(W)substitutes for antimony(Sb)and fluorine(F)replaces sulfur(S)in the NSS lattice.The co-doping of W and F not only broadens the interplanar spacing of NSS but also promotes the stable formation of the cubic phase of NSS,thereby effectively enhancing the transport ability of sodium ions within NSS.Among them,Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24) exhibits the highest ionic conductivity of 4.45 mS·cm^(-1).Furthermore,F doping facilitates the in-situ formation of NaF between the electrolyte and metallic sodium,significantly improving interfacial stability.Electrochemical evaluation shows that the Na/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na symmetric cell achieves a high critical current density of 1.65 mA·cm^(-2) and maintains stable sodium plating/stripping cycling for 500 h at 0.1 mA·cm^(-2).Additionally,the TiS2/Na_(2.52)Sb|_(0.76)W_(0.24)S_(3.76)F_(0.24)/Na full cell exhibits outstanding cycling stability and rate capability.
基金Projects(52204378,22309209)supported by the National Natural Science Foundation of ChinaProject(2023JJ40709)supported by the Natural Science Foundation of Hunan Province,China。
文摘In recent years,the development and research of electrochemical energy storage systems that can efficiently transform chemical energy into electrical energy with a long service life have become a key area of study.Sodium-ion batteries,leveraging their chemical similarity to lithium-ion batteries,along with their abundant resources and low cost,are seen as a viable alternative to lithium-ion batteries.Additionally,all-solid-state sodium-ion batteries have drawn significant attention due to safety considerations.Among the solid electrolytes for all-solid-state sodium-ion batteries,the NASICON solid-state electrolyte emerges as one of the most promising choices for sodium battery solid electrolytes.However,to date,there has not been a comprehensive review summarizing the existing problems of NASICON electrolyte materials and the corresponding specific modification methods.This review simply summarizes the present issues of NASICON for all-solid-state sodium-ion batteries,such as,the low ionic conductivity,the poor interface stability and compatibility,and the dendrite formation.Then,the corresponding solutions to address these issues are discussed,including the ion doping,the interface modification,the sintering parameters optimization,and the composite electrolytes regulation.Finally,the perspectives of NASICON solid-state electrolyte are discussed.
基金Project (2003AA32X010) supported by the National High Technology Research and Development Program of China
文摘A polymer electrolyte based on poly(vinylidene) fluoride-hexafluoropropylene was prepared by evaporating the solvent of dimethyl formamide, and non-woven fabric was used to reinforce the mechanical strength of polymer electrolyte and maintain a good interfacial property between the polymer electrolyte and electrodes. Polymer lithium batteries were assembled by using LiCoO2 as cathode material and lithium foil as anode material. Scanning electron microscopy, alternating current impedance, linear sweep voltammetry and charge-discharge tests were used to study the properties of polymer membrane and polymer Li-ion batteries. The results show that the technics of preparing polymer electrolyte by directly evaporating solvent is simple. The polymer membrane has rich micro-porous structure on both sides and exhibits 280% uptake of electrolyte solution. The electrochemical stability window of this polymer electrolyte is about 5.5 V, and its ionic conductivity at room temperature reaches 0.151 S/m. The polymer lithium battery displays an initial discharge capacity of 138 mA·h/g and discharge plateau of about 3.9 V at 0.2 current rate. After 30 cycles, its loss of discharge capacity is only 2%. When the battery discharges at 0.5 current rate, the voltage plateau is still 3.7 V. The discharge capacities of 0.5 and 1.0 current rates are 96% and 93% of that of 0.1 current rate, respectively.
文摘Composite polymer electrolytes based on polyethylene oxide(PEO) were prepared by using LiClO4 as doping salt and silane-modified SiO2 as filler. SiO2 was formed in-situ in (PEO)8LiClO4 matrix by the hydrolysis and condensation reaction of Si(OC4H9)4. The crystallinity,morphology and ionic conductivity of composite polymer electrolyte films were examined by differential scanning calorimetry,scanning electron microscopy,atom force microscopy and alternating current impedance spectroscopy,respectively. Compared with the crystallinity of the unmodified SiO2 as inert filler,that of composite polymer electrolytes is decreased. The results show that silane-modified SiO2 particles are uniformly dispersed in (PEO)8LiClO4 composite polymer electrolyte film and the addition of silane-modified SiO2 increases the ionic conductivity of the (PEO)8LiClO4 more noticeably. When the mass fraction of SiO2 is about 10%,the conductivity of (PEO)8LiClO4-modified SiO2 attains a maximum value of 4.8×10-5 S·cm-1.
