The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algor...The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear. The interpolation algorithm is implemented to control the gear cutting on self-developed spiral bevel gear NC cutting machine. An example is given to verify the mathematical model and the interpolation algorithm.展开更多
Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the lo...Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.展开更多
In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This st...In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.展开更多
Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors...Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors(such as weather),there are often various anomalies in wind power data,such as missing numerical values and unreasonable data.This significantly affects the accuracy of wind power generation predictions and operational decisions.Therefore,developing and applying reliable wind power interpolation methods is important for promoting the sustainable development of the wind power industry.In this study,the causes of abnormal data in wind power generation were first analyzed from a practical perspective.Second,an improved complete ensemble empirical mode decomposition with adaptive noise(ICEEMDAN)method with a generative adversarial interpolation network(GAIN)network was proposed to preprocess wind power generation and interpolate missing wind power generation sub-components.Finally,a complete wind power generation time series was reconstructed.Compared to traditional methods,the proposed ICEEMDAN-GAIN combination interpolation model has a higher interpolation accuracy and can effectively reduce the error impact caused by wind power generation sequence fluctuations.展开更多
Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpol...Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpolation theorem,we study the spherical fractional maximal functions and the fractional maximal commutators on rearrangement-invariant quasi-Banach function spaces.In particular,we obtain the mapping properties of the spherical fractional maximal functions and the fractional maximal commutators on generalized Lorentz spaces.展开更多
In this paper we investigate simultaneous approximation for arbitrary system of nodes on smooth domain in complex plane. Some results which are better than those of known theorems are obtained.
A kind of generalization of the Curve Type Node Configuration is given in this paper, and it is called the generalized node configuration CTNCB in Rs(s > 2). The related multivariate polynomial interpolation proble...A kind of generalization of the Curve Type Node Configuration is given in this paper, and it is called the generalized node configuration CTNCB in Rs(s > 2). The related multivariate polynomial interpolation problem is discussed. It is proved that the CTNCB is an appropriate node configuration for the polynomial space Pns(s > 2). And the expressions of the multivariate Vandermonde determinants that are related to the Odd Curve Type Node Configuration in R2 are also obtained.展开更多
In the research of bistatic tomography imaging of translating object, we get a class of generalized Radon transformation. In this paper, first we prove the existence and uniguenness of its solution in theory and poin...In the research of bistatic tomography imaging of translating object, we get a class of generalized Radon transformation. In this paper, first we prove the existence and uniguenness of its solution in theory and point out this problem is ill-posed with an especial example.Secondly by means of multiplicative interpolation functions to approximate models, we constracted regularizing functional. Finally we simplify calculation by Fourier transformation,get regularizing solutions that converge to accurate solution.展开更多
A boundary-type meshless method called the scaled boundary node method （SBNM） is developed to directly evaluate mixed mode stress intensity factors （SIFs） without extra post-processing. The SBNM combines the scale...A boundary-type meshless method called the scaled boundary node method （SBNM） is developed to directly evaluate mixed mode stress intensity factors （SIFs） without extra post-processing. The SBNM combines the scaled boundary equations with the moving Kriging （MK） interpolation to retain the dimensionality advantage of the former and the meshless attribute of the latter. As a result, the SBNM requires only a set of scattered nodes on the boundary, and the displacement field is approximated by using the MK interpolation technique, which possesses the 5 function property. This makes the developed method efficient and straightforward in imposing the essential boundary conditions, and no special treatment techniques are required. Besides, the SBNM works by weakening the governing differential equations in the circumferential direction and then solving the weakened equations analytically in the radial direction. Therefore, the SBNM permits an accurate representation of the singularities in the radial direction when the scaling center is located at the crack tip. Numerical examples using the SBNM for computing the SIFs are presented. Good agreements with available results in the literature are obtained.展开更多
在数字示波器中,当最高采样率都不能满足系统要求的时候,我们需要对其进行相应倍数的插值。文章介绍了使用XILINX System Generator for DSP工具在MATLAB/Simulink的环境下完成算法的建模,然后生成相应的工程代码,来开发基于FPGA的插值...在数字示波器中,当最高采样率都不能满足系统要求的时候,我们需要对其进行相应倍数的插值。文章介绍了使用XILINX System Generator for DSP工具在MATLAB/Simulink的环境下完成算法的建模,然后生成相应的工程代码,来开发基于FPGA的插值数字滤波器,借助Modelsim工具验证实现结果。大大消除了原先系统工程师和软硬件工程师之间的隔阂,同时也简化了传统的FPGA开发流程。展开更多
In this paper, we investigate the impulsive synchronization between two coupled complex networks with time- delayed dynamical nodes. Based on the Lyapunov stability, the linear feedback control and the impulsive contr...In this paper, we investigate the impulsive synchronization between two coupled complex networks with time- delayed dynamical nodes. Based on the Lyapunov stability, the linear feedback control and the impulsive control theories, the linear feedback and the impulsive controllers are designed separately. By using the generalized Barbalat＇s lemma, the global asymptotic impulsive synchronization of the drive-response complex networks is derived and some corresponding sufficient conditions are also obtained. Numerical examples are presented to verify the effectiveness and the correctness of the synchronization criteria.展开更多
文摘The generating motion of the generating gear and the work gear on spiral bevel gear NC machining is analyzed. The mathematical model of the tooth surface of spiral bevel gear is presented. A direct interpolation algorithm of spiral bevel gear NC machining is proposed, thus establishing the relationship between the motion of the cutter-head center and the rotation of the work gear. The interpolation algorithm is implemented to control the gear cutting on self-developed spiral bevel gear NC cutting machine. An example is given to verify the mathematical model and the interpolation algorithm.
基金Supported by the Aviation Science Foundationof China(2009ZB5052)the Specialized Research Foundation for the Doctor Program of Higher Education(20070287039)~~
文摘Node interpolation cell method（NICM）is a micromechanics method employing the virtual displacement principle and the representative volume element（RVE）scheme to obtain the relationship between the global and the local strain.Mechanical properties of 2-D textile fabric reinforced ceramic matrix composites are predicted by NICM.Microstructures of 2-D woven and braided fabric reinforced composite are modeled by two kinds of RVE scheme.NICM is used to predict the macroscopic mechanical properties.The fill and warp yarns are simulated with cubic B-spline and their undulating forms are approximated by sinusoid.The effect of porosity on the fiber and matrix are considered as a reduction of elastic module.The connection of microstructure parameters and fiber volume fraction is modeled to investigate the reflection on the mechanical properties.The results predicted by NICM are compared with that by the finite element method（FEM）.The comparison shows that NICM is a valid and feasible method for predicting the mechanics properties of 2-D woven and braided fabric reinforced ceramic matrix composites.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.10902076)the Natural Science Foundation of Shanxi Province of China(Grant No.2007011009)+1 种基金the Scientific Research and Development Program of the Shanxi Higher Education Institutions(Grant No.20091131)the Doctoral Startup Foundation of Taiyuan University of Science and Technology(Grant No.200708)
文摘In this paper, a meshfree boundary integral equation （BIE） method, called the moving Kriging interpolation- based boundary node method （MKIBNM）, is developed for solving two-dimensional potential problems. This study combines the DIE method with the moving Kriging interpolation to present a boundary-type meshfree method, and the corresponding formulae of the MKIBNM are derived. In the present method, the moving Kriging interpolation is applied instead of the traditional moving least-square approximation to overcome Kronecker＇s delta property, then the boundary conditions can be imposed directly and easily. To verify the accuracy and stability of the present formulation, three selected numerical examples are presented to demonstrate the efficiency of MKIBNM numerically.
基金We gratefully acknowledge the support of National Natural Science Foundation of China(NSFC)(Grant No.51977133&Grant No.U2066209).
文摘Randomness and fluctuations in wind power output may cause changes in important parameters(e.g.,grid frequency and voltage),which in turn affect the stable operation of a power system.However,owing to external factors(such as weather),there are often various anomalies in wind power data,such as missing numerical values and unreasonable data.This significantly affects the accuracy of wind power generation predictions and operational decisions.Therefore,developing and applying reliable wind power interpolation methods is important for promoting the sustainable development of the wind power industry.In this study,the causes of abnormal data in wind power generation were first analyzed from a practical perspective.Second,an improved complete ensemble empirical mode decomposition with adaptive noise(ICEEMDAN)method with a generative adversarial interpolation network(GAIN)network was proposed to preprocess wind power generation and interpolate missing wind power generation sub-components.Finally,a complete wind power generation time series was reconstructed.Compared to traditional methods,the proposed ICEEMDAN-GAIN combination interpolation model has a higher interpolation accuracy and can effectively reduce the error impact caused by wind power generation sequence fluctuations.
文摘Boyd^interpolation theorem for quasilinear operators is generalized in this paper,which gives a generalization for both the Marcinkiewicz interpolation theorem and Boyd^interpolation theorem.By using this new interpolation theorem,we study the spherical fractional maximal functions and the fractional maximal commutators on rearrangement-invariant quasi-Banach function spaces.In particular,we obtain the mapping properties of the spherical fractional maximal functions and the fractional maximal commutators on generalized Lorentz spaces.
文摘In this paper we investigate simultaneous approximation for arbitrary system of nodes on smooth domain in complex plane. Some results which are better than those of known theorems are obtained.
基金the Science and Technology Project of Jiangxi Provincial Department of Education([2007]320)
文摘A kind of generalization of the Curve Type Node Configuration is given in this paper, and it is called the generalized node configuration CTNCB in Rs(s > 2). The related multivariate polynomial interpolation problem is discussed. It is proved that the CTNCB is an appropriate node configuration for the polynomial space Pns(s > 2). And the expressions of the multivariate Vandermonde determinants that are related to the Odd Curve Type Node Configuration in R2 are also obtained.
文摘In the research of bistatic tomography imaging of translating object, we get a class of generalized Radon transformation. In this paper, first we prove the existence and uniguenness of its solution in theory and point out this problem is ill-posed with an especial example.Secondly by means of multiplicative interpolation functions to approximate models, we constracted regularizing functional. Finally we simplify calculation by Fourier transformation,get regularizing solutions that converge to accurate solution.
基金Project supported by the National Natural Science Foundation of China (Grant No. 11002054)
文摘A boundary-type meshless method called the scaled boundary node method （SBNM） is developed to directly evaluate mixed mode stress intensity factors （SIFs） without extra post-processing. The SBNM combines the scaled boundary equations with the moving Kriging （MK） interpolation to retain the dimensionality advantage of the former and the meshless attribute of the latter. As a result, the SBNM requires only a set of scattered nodes on the boundary, and the displacement field is approximated by using the MK interpolation technique, which possesses the 5 function property. This makes the developed method efficient and straightforward in imposing the essential boundary conditions, and no special treatment techniques are required. Besides, the SBNM works by weakening the governing differential equations in the circumferential direction and then solving the weakened equations analytically in the radial direction. Therefore, the SBNM permits an accurate representation of the singularities in the radial direction when the scaling center is located at the crack tip. Numerical examples using the SBNM for computing the SIFs are presented. Good agreements with available results in the literature are obtained.
文摘在数字示波器中,当最高采样率都不能满足系统要求的时候,我们需要对其进行相应倍数的插值。文章介绍了使用XILINX System Generator for DSP工具在MATLAB/Simulink的环境下完成算法的建模,然后生成相应的工程代码,来开发基于FPGA的插值数字滤波器,借助Modelsim工具验证实现结果。大大消除了原先系统工程师和软硬件工程师之间的隔阂,同时也简化了传统的FPGA开发流程。
基金Project supported by the National Natural Science Foundation of China (Grant No.70871056)the Six Talents Peak Foundation of Jiangsu Province,China
文摘In this paper, we investigate the impulsive synchronization between two coupled complex networks with time- delayed dynamical nodes. Based on the Lyapunov stability, the linear feedback control and the impulsive control theories, the linear feedback and the impulsive controllers are designed separately. By using the generalized Barbalat＇s lemma, the global asymptotic impulsive synchronization of the drive-response complex networks is derived and some corresponding sufficient conditions are also obtained. Numerical examples are presented to verify the effectiveness and the correctness of the synchronization criteria.
