Background As commonly used harvest residue management practices in subtropical plantations,stem only harvesting(SOH)and whole tree harvesting(WTH)are expected to affect soil organic carbon(SOC)content.However,knowled...Background As commonly used harvest residue management practices in subtropical plantations,stem only harvesting(SOH)and whole tree harvesting(WTH)are expected to affect soil organic carbon(SOC)content.However,knowledge on how SOC and its fractions(POC:particulate organic carbon;MAOC:mineral-associated organic carbon)respond to different harvest residue managements is limited.Methods In this study,a randomized block experiment containing SOH and WTH was conducted in a Chinese fir(Cunninghamia lanceolata)plantation.The effect of harvest residue management on SOC and its fractions in topsoil(0–10cm)and subsoil(20–40cm)was determined.Plant inputs(harvest residue retaining mass and fine root biomass)and microbial and mineral properties were also measured.Results The responses of SOC and its fractions to different harvest residue managements varied with soil depth.Specifically,SOH enhanced the content of SOC and POC in topsoil with increases of 15.9%and 29.8%,respectively,compared with WTH.However,SOH had no significant effects on MAOC in topsoil and SOC and its fractions in subsoil.These results indicated that the increase in POC induced by the retention of harvest residue was the primary contributor to SOC accumulation,especially in topsoil.The harvest residue managements affected SOC and its fractions through different pathways in topsoil and subsoil.The plant inputs(the increase in fine root biomass induced by SOH)exerted a principal role in the SOC accumulation in topsoil,whereas mineral and microbial properties played a more important role in regulating SOC dynamics than plants inputs in subsoil.Conclusion The retention of harvest residues can promote SOC accumulation by increasing POC,and is thus suggested as an effective technology to enhance the soil carbon sink for mitigating climate change in plantation management.展开更多
The increasing use of diesel-powered equipment in confined spaces(underground mines) has the potential to over expose underground miners under the threat of diesel particulate matter(DPM). Miners in underground mines ...The increasing use of diesel-powered equipment in confined spaces(underground mines) has the potential to over expose underground miners under the threat of diesel particulate matter(DPM). Miners in underground mines can be exposed to DPM concentrations far more than works in other industries. A great number of animal and epidemiological studies have shown that both short-term and long-term DPM exposure have adverse health effect. Based on reviews of related studies, especially some recent evidence, this paper investigated the long and short-term health effects based on animal studies and epidemiological studies. The exposure-response relationship studies were also explored and compared to the current DPM regulation or standards in some countries. This paper found that the DPM health effect studies specifically for miners are not sufficient to draw solid conclusions, and a recommendation limit of DPM concentration can be put in place for better protection of miners from DPM health risk. Current animal studies lack the use of species that have similar lung functions as human for understanding the cancer mode of action in human. And finally, the DPM health hazard will continue to be a challenging topic before the mode of action and reliable exposure-response relationship are established.展开更多
Objective To investigate the antagonistic effects of different doses of Lianhua Qingwen on pulmonary injury induced by fine particulates PM2.5 in rats. Methods Fine particulates suspended in the environment were colle...Objective To investigate the antagonistic effects of different doses of Lianhua Qingwen on pulmonary injury induced by fine particulates PM2.5 in rats. Methods Fine particulates suspended in the environment were collected. Forty-eight healthy adult wistar rats were randomly divided into 6 groups with 8 rats in each group. Four groups of rats were exposed to PM2.5 by intratracheally dripping suspensions of fine particulates PM2.5(7.5 mg/kg) as dust-exposed model rats. Among them 24 rats in three groups received Lianhua Qingwen treatment(crude drug) at a dose of 2 g/kg, 4 g/kg, 8 g/kg per day for 3 days before dust exposure and were defined as low-dose, middle-dose and high-dose Lianhua Qingwen treatment groups respectively. The other dust-exposed model rats without treatment were assigned as PM2.5 control group. The un-exposed rats were set as saline control group(1.5 ml/kg saline) and blank control group. All rats were killed after 24 hours of the exposure. Lung tissue, serum and bronchoalveolar lavage fluid(BALF) were collected. The levels of malonaldehyde(MDA), lactate dehydrogenase(LDH), and glutathione peroxidase(GSH-PX) in blood serum and BALF, and superoxide dismutase(SOD) in blood surum were measured using fluorescent quantitation PCR; Expression of NF-E2-related factor 2(NRF-2), heme oxygenase 1(HO-1) and quinone oxidoreductase 1(NQO1) in lung tissues were measured using Western blot. Pathological changes of lung tissues in each group were also examined. Results Pathology revealed thickened alveolar septum, congestion of capillary, interstitial edema and infiltration of lymphocyte and neutrophil surrounding bronchiole in the PM2.5 control group, which weresignificantly relieved in the Lianhua Qingwen treatment groups. Compared to the blank and saline control groups, the PM2.5 control group had significantly higher levels of LDH and MDA(p<0.01) and lower level of GSH-PS(p<0.01) in BALF, significantly higher levels of LDH and MDA(p<0.05) and lower level of GSH-PS(p<0.05) in rat serum. The levels of MDA in blood serum and BALF were significantly lower in each treatment group than that in PM2.5 control group(all P<0.05). In both middle-dose and high-dose treatment group the measurements of LDH in serum and BALF as well as GSH-PX in serum were significant difference from those of PM2.5 control group(all P<0.05). Expressions of NRF-2, HO-1 and NQO1 in lung tissues were significantly different among middle-dose and high-dose treatment group compared with those in PM2.5 control group(all P<0.05). Conclusion Fine particulates PM2.5 in environment may induce pulmonary oxidative lesions in rats. Middle-dose and high-dose Lianhua Qingwen has antagonist effece on the injuries induced by fine particulates.展开更多
A new dual-layer granular bed filter for hot gas cleanup was invented and studied experimentally. Fine sand,0.5-1 mm grain size and about 1350 kg/m3 bulk density,was used as the lower layer of the filter. Expanded per...A new dual-layer granular bed filter for hot gas cleanup was invented and studied experimentally. Fine sand,0.5-1 mm grain size and about 1350 kg/m3 bulk density,was used as the lower layer of the filter. Expanded perlite par-ticles,2-5 mm grain size and about 70 kg/m3 bulk density,was used for the upper layer of the filter in this study. It was confirmed that the sizes and densities of these two media matched well; the binary media remained in complete segre-gation during regeneration by fluidization. Test results show that the filtration of the expanded perlite particle layer was characterized as "deep bed filtration." Filtration of the fine sand layer was "surface cake filtration." The expanded per-lite particle layer contributed about 90% to the bed dust capacity,but only about 20% to the total bed pressure drop,which increased the bed dust capacity ten fold compared to a single-layer bed of the same sand and the same total bed pressure drop. The dust cake on the surface of the fine sand layer raised the collection efficiencies to over 99.99%.展开更多
An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of ...An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of trapped particulate matter(PM)were conducted.The concentrations of the PM decomposition products(CO,)and the internal temperature of the DPF were monitored to determine the performance of DPF regeneration and thermal safety of the NTP technology.The results showed that the concentrations of CO and CO2and the mass of P.V1 decomposition increased with the increase in the amount of captured PM,whereas the concentration of the NTP active substance(O,)escaping from the DPF decreased under the same working conditions of the NTP injection system.A higher amount of captured PM promoted the oxidative decomposition reaction between NTP and PM and improved the utilization rate of the NTP active substances.The peak temperature at the same measuring point inside the DPF generally increased and the phases of the peak temperature were delayed as the amount of captured PM increased.The temperature peaks and temperature gradients during the DPF regeneration process were far lower than llie failure limit value,which indicates that NTP regeneration technology has good thermal durability and increases the service life of the DPF.展开更多
The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow ...The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.展开更多
Diesel particulate matter(DPM) is considered carcinogenic after prolonged exposure. This paper used computational fluid dynamics(CFD) method to study the effect of four auxiliary ventilation systems on DPM distributio...Diesel particulate matter(DPM) is considered carcinogenic after prolonged exposure. This paper used computational fluid dynamics(CFD) method to study the effect of four auxiliary ventilation systems on DPM distribution in a dead-end entry with loading operation. The auxiliary ventilation systems considered include: blower fan and tubing; exhaust fan and tubing, jet fan, and push–pull system. A species transport model with buoyancy effect was used to examine the DPM dispersion pattern with unsteady state analysis. During the 200 s of the loading operation, high DPM levels were identified in the face and dead-end entry regions. This study can be used for mining engineer as guidance to design and setup of local ventilation. It can also be used for selection of DPM control strategies and DPM annual training for underground miners.展开更多
To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed...To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed.The DBD reactor with the main active substance of nonthermal plasma(NTP)as the target parameter was optimized by adjusting the feed gas,packing particles(material or size),and cooling water temperature.Moreover,a set of optimal working parameters(gas source,O_2;packing particles,1.2–1.4 mm ZrO_(2);and cooling water temperature,20℃)was selected to evaluate the effect of different O_(3) concentrations on DPF regeneration.The research results showed that selecting packing particles with high dielectric constant and large particles,as well as reducing the cooling water temperature,with oxygen as the feed gas,contributed to an increase in O_(3) concentration.During DPF regeneration,the following changes were observed:the power of the NTP reactor decreased to lower than 100 W,the O_(3) concentration increased from 15 g m^(-3) to 45 g m^(-3),the CO and CO_2 volume fractions of the particulate matter decomposition products increased,and the peak regeneration temperature increased to 173.4℃.The peak temperature arrival time was 60 min earlier,indicating that the regeneration rate of DPF increased with the increase in O_(3) concentration.However,the O_(3) utilization rate(the amount of carbon deposit removed per unit volume O_(3))initially increased and then decreased;when the O_(3) concentration was set to 25 g m^(-3),the highest O_(3) utilization rate was reached.The packed-bed DBD technology contributed to the increase in the concentration of NTP active substances and the regeneration efficiency of DPF.It provides a theoretical and experimental basis for high-efficiency regeneration of DPF at low temperatures(<200℃).展开更多
This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were ...This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.展开更多
Background: The loss of soil organic carbon(SOC) following conversion of natural forests to managed plantations has been widely reported. However, how different SOC fractions and microbial necromass C(MNC) respond to ...Background: The loss of soil organic carbon(SOC) following conversion of natural forests to managed plantations has been widely reported. However, how different SOC fractions and microbial necromass C(MNC) respond to forest management practices remains unclear.Methods: We sampled 0–10 cm mineral soil from three different management plantations and one protected forest in Guangxi, Southern China, to explore how forest management practices affect SOC through changing mineralassociated C(MAOC) and particulate organic C(POC), as well as fungal and bacterial necromass C.Results: Compared with the protected forest, SOC and POC in the abandoned, mixed and Eucalyptus plantations significantly decreased, but MAOC showed no significant change, indicating that the loss of SOC was mainly from decreased POC under forest management. Forest management also significantly reduced root biomass, soil extractable organic C, MNC, and total microbial biomass(measured by phospholipid fatty acid), but increased fungi-to-bacteria ratio(F:B) and soil peroxidase activity. Moreover, POC was positively correlated with root biomass, total microbial biomass and MNC, and negatively with F:B and peroxidase activity. These results suggested that root input and microbial properties together regulated soil POC dynamics during forest management.Conclusion: Overall, this study indicates that forest management intervention significantly decreases SOC by reducing POC in Guangxi, Southern China, and suggests that forest protection can help to sequester more soil C in forest ecosystems.展开更多
Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical,automobile,aerospace including defence technology.Variety of modelling techniques have been a...Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical,automobile,aerospace including defence technology.Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites.Due to their favourable properties,particle-based methods provide a convenient platform to model failure or fracture of these composites.Smooth particle hydrodynamics(SPH)is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting.One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions.In this paper,a masterslave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method.The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach.A minimum cut-off value-based error criteria is employed to improve the computational efficiency of the proposed methodology.In addition,the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency.The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.展开更多
Evolution of spatial distribution of charged particulates under the action of an external force is investigated. It is found that starting from a homogeneous Maxwellian distribution of particulates, clusters can form ...Evolution of spatial distribution of charged particulates under the action of an external force is investigated. It is found that starting from a homogeneous Maxwellian distribution of particulates, clusters can form and aggregate. The evolution process, as well as the asymptotic number and configuration of the clusters formed, depends strongly on the strength of the external force. The particulates in most of the final clusters are in the crystal state, as can also be deduced from the corresponding velocity and auto-correlation functions.展开更多
Gallium phosphide （GAP） nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by ...Gallium phosphide （GAP） nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by x-ray diffraction, high resolution transmission electron microscopy and field emission scanning electron microscopy. The film was further investigated by spectroscopic ellipsometry. After the model GaP＋void[SiO2 was built and an effective medium approximation was adopted, the values of the refractive index n and the extinction coefficient k were calculated for the energy range of 0.75 eV-4.0 eV using the dispersion formula in DeltaPsi2 software. The absorption coefficient of the film was calculated from its k and its energy gaps were further estimated according to the Tauc equation, which were further verified by its fluorescence spectrum measurement. The structure and optical absorption properties of the nanoparticulate films are promising for their potential applications in hybrid solar cells.展开更多
Reducing the linear system of two first order equilibrium equations involving normal stress σ(ρ,θ) and shearing stress v(ρ,θ), by elimination, to two decoupled second order equations in σ and v, ...Reducing the linear system of two first order equilibrium equations involving normal stress σ(ρ,θ) and shearing stress v(ρ,θ), by elimination, to two decoupled second order equations in σ and v, we find that, for pressure only case, v(ρ,θ) vanishes in the half space. Consequently, the second order equation in σ can be simplified. In the language of linear system analysis, the medium(system) function, characterizing the mechanical behavior of a particulate medium in pressure only case, is obtained from the simplified second order equation ( 2 ρ+ 2 θ)σ(ρ,θ)=0 and can be inverted to give impulse reponse explicitly. Thus, response σ α(ρ,θ) may be computed directly from input, i.e., the surface pressure φ α(ρ) , by integration. Some explicit formulas for transmission problems, including response to input of strip linearly increasing pressure, are given in the paper.展开更多
A concise formula for computing radiation heat flow of in-cylinder soot is presented, based on the assumptions that in-cylinder heat transfer of diesel engines is a quasi-equilibrium process and in-cylinder soot parti...A concise formula for computing radiation heat flow of in-cylinder soot is presented, based on the assumptions that in-cylinder heat transfer of diesel engines is a quasi-equilibrium process and in-cylinder soot particles are spherical. That in this formula there consist neither constants needing adjustments nor variables related to engine types or operating conditions makes it universal and easy to use. Also it can be seen from the formula that radiation heat transfer is proportional to the quotient of in-cylinder soot mass over the average radius of primary particles. Besides, with the help of different algorithms it can be used for predicting cylinders＇ global as well as local radiation heat flows. As a demonstrative application on its global facet, a three-dimension simulation study about the soot-radiation-related heat flow in the combustion chamber of a diesel engine is carried out. Results show that the range of the soot-radiation-related heat flow computed by this formula agrees well with other researcher＇s earlier theoretic reasoning and experimental measurements.展开更多
This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of...This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of the problem by a statistical second-order two-scale （SSOTS） analysis method and the algorithm procedure based on the finite-element difference method are presented. Numerical results of coupled cases are compared with those of uncoupled cases. It shows that the coupling effects on temperature, thermal flux, displacement, and stresses are very distinct, and the micro- characteristics of particles affect the coupling effect of the random composites. Furthermore, the coupling effect causes a lag in the variations of temperature, thermal flux, displacement, and stresses.展开更多
General solution of stresses solved from the two dimensiona l system of equilibrium equations in Cartesian coordinates is characterized by the presence ...General solution of stresses solved from the two dimensiona l system of equilibrium equations in Cartesian coordinates is characterized by the presence of two families of characteristic lines along which initial stresses and discontinuities in them are transmitted intact far down to infinity.This is against our intuition and not verifiable by experimental findings. For the fundamental case of infinite uniform pressure on the upper surface,a comparison between solutions from equilibrium equations in Cartesian coordinates and from those in polar coordinates is carried out in details.The semi infinite characteristic lines in the former are bent up to exponential spirals with both ends on the upper surface in the latter.Thus,the transmission pattern from solution in polar coordinates comes closer to actual situation.However,in polar reference frame,the solution for distribution of stresses in particulate half space under surface strip pressure or so can then only be obtained from boundary value problem of second order partial differential equation.展开更多
Particulates generated from electrode erosion in gas spark gap is inevitable and may initiate selfbreakdown behavior with high risk.Traditionally,this problem is addressed by empirical method qualitatively.To push thi...Particulates generated from electrode erosion in gas spark gap is inevitable and may initiate selfbreakdown behavior with high risk.Traditionally,this problem is addressed by empirical method qualitatively.To push this old problem forward,this paper conducts laser confocal microscopy measurement of eroded surface and a statistical method is introduced to obtain visualization of particulates distribution from electrode erosion after different shots.This method allows dense particulates to be classified with their heights in z direction and scattered figures of particulates within certain height range are obtained.Results indicate that the higher-than-10 μm particulates start to emerge after 200 discharge shots and particulates number has a waved radial distribution with a 0.5 mm wide deposition zone.Based on these quantitative results,the risk of reignition and field-distortion failure that are triggered by particulates can be assessed.展开更多
Based on a model of two stress tensors possessing high fluidity, a statically determinate system of partial difference equations of equilibrium has been derived for use to particulate media...Based on a model of two stress tensors possessing high fluidity, a statically determinate system of partial difference equations of equilibrium has been derived for use to particulate media of such nature. Through non dimensionalization of independent and dependent variables, the system passes into that of partial differential equations. Although the statically determinate system of partial differential equations is non linear, yet the two dimensional one falls apart into three separate groups which can be solved easily one after another.展开更多
In this paper, we proposed a five-zone model to predict the elastic modulus of particulate reinforced metal matrix composite. We simplified the calculation by ignoring structural parameters including particulate shape...In this paper, we proposed a five-zone model to predict the elastic modulus of particulate reinforced metal matrix composite. We simplified the calculation by ignoring structural parameters including particulate shape, arrangement pattern and dimensional variance mode which have no obvious influence on the elastic modulus of a composite, and improved the precision of the method by stressing the interaction of interfaces with pariculates and maxtrix of the composite. The five- zone model can reflect effects of interface modulus on elastic modulus of composite. It overcomes limitations of expressions of rigidity mixed law and flexibility mixed law. The original idea of five zone model is to put forward the particulate/interface interactive zone and matrix/interface interactive zone. By organically integrating the rigidity mixed law and flexibility mixed law, the model can predict the engineering elastic constant of a composite effectively.展开更多
基金supported by the National Natural Science Foundation of China(No.32192434)the National Key Research and Development Program of China(No.2022YFF1303003).
文摘Background As commonly used harvest residue management practices in subtropical plantations,stem only harvesting(SOH)and whole tree harvesting(WTH)are expected to affect soil organic carbon(SOC)content.However,knowledge on how SOC and its fractions(POC:particulate organic carbon;MAOC:mineral-associated organic carbon)respond to different harvest residue managements is limited.Methods In this study,a randomized block experiment containing SOH and WTH was conducted in a Chinese fir(Cunninghamia lanceolata)plantation.The effect of harvest residue management on SOC and its fractions in topsoil(0–10cm)and subsoil(20–40cm)was determined.Plant inputs(harvest residue retaining mass and fine root biomass)and microbial and mineral properties were also measured.Results The responses of SOC and its fractions to different harvest residue managements varied with soil depth.Specifically,SOH enhanced the content of SOC and POC in topsoil with increases of 15.9%and 29.8%,respectively,compared with WTH.However,SOH had no significant effects on MAOC in topsoil and SOC and its fractions in subsoil.These results indicated that the increase in POC induced by the retention of harvest residue was the primary contributor to SOC accumulation,especially in topsoil.The harvest residue managements affected SOC and its fractions through different pathways in topsoil and subsoil.The plant inputs(the increase in fine root biomass induced by SOH)exerted a principal role in the SOC accumulation in topsoil,whereas mineral and microbial properties played a more important role in regulating SOC dynamics than plants inputs in subsoil.Conclusion The retention of harvest residues can promote SOC accumulation by increasing POC,and is thus suggested as an effective technology to enhance the soil carbon sink for mitigating climate change in plantation management.
文摘The increasing use of diesel-powered equipment in confined spaces(underground mines) has the potential to over expose underground miners under the threat of diesel particulate matter(DPM). Miners in underground mines can be exposed to DPM concentrations far more than works in other industries. A great number of animal and epidemiological studies have shown that both short-term and long-term DPM exposure have adverse health effect. Based on reviews of related studies, especially some recent evidence, this paper investigated the long and short-term health effects based on animal studies and epidemiological studies. The exposure-response relationship studies were also explored and compared to the current DPM regulation or standards in some countries. This paper found that the DPM health effect studies specifically for miners are not sufficient to draw solid conclusions, and a recommendation limit of DPM concentration can be put in place for better protection of miners from DPM health risk. Current animal studies lack the use of species that have similar lung functions as human for understanding the cancer mode of action in human. And finally, the DPM health hazard will continue to be a challenging topic before the mode of action and reliable exposure-response relationship are established.
文摘Objective To investigate the antagonistic effects of different doses of Lianhua Qingwen on pulmonary injury induced by fine particulates PM2.5 in rats. Methods Fine particulates suspended in the environment were collected. Forty-eight healthy adult wistar rats were randomly divided into 6 groups with 8 rats in each group. Four groups of rats were exposed to PM2.5 by intratracheally dripping suspensions of fine particulates PM2.5(7.5 mg/kg) as dust-exposed model rats. Among them 24 rats in three groups received Lianhua Qingwen treatment(crude drug) at a dose of 2 g/kg, 4 g/kg, 8 g/kg per day for 3 days before dust exposure and were defined as low-dose, middle-dose and high-dose Lianhua Qingwen treatment groups respectively. The other dust-exposed model rats without treatment were assigned as PM2.5 control group. The un-exposed rats were set as saline control group(1.5 ml/kg saline) and blank control group. All rats were killed after 24 hours of the exposure. Lung tissue, serum and bronchoalveolar lavage fluid(BALF) were collected. The levels of malonaldehyde(MDA), lactate dehydrogenase(LDH), and glutathione peroxidase(GSH-PX) in blood serum and BALF, and superoxide dismutase(SOD) in blood surum were measured using fluorescent quantitation PCR; Expression of NF-E2-related factor 2(NRF-2), heme oxygenase 1(HO-1) and quinone oxidoreductase 1(NQO1) in lung tissues were measured using Western blot. Pathological changes of lung tissues in each group were also examined. Results Pathology revealed thickened alveolar septum, congestion of capillary, interstitial edema and infiltration of lymphocyte and neutrophil surrounding bronchiole in the PM2.5 control group, which weresignificantly relieved in the Lianhua Qingwen treatment groups. Compared to the blank and saline control groups, the PM2.5 control group had significantly higher levels of LDH and MDA(p<0.01) and lower level of GSH-PS(p<0.01) in BALF, significantly higher levels of LDH and MDA(p<0.05) and lower level of GSH-PS(p<0.05) in rat serum. The levels of MDA in blood serum and BALF were significantly lower in each treatment group than that in PM2.5 control group(all P<0.05). In both middle-dose and high-dose treatment group the measurements of LDH in serum and BALF as well as GSH-PX in serum were significant difference from those of PM2.5 control group(all P<0.05). Expressions of NRF-2, HO-1 and NQO1 in lung tissues were significantly different among middle-dose and high-dose treatment group compared with those in PM2.5 control group(all P<0.05). Conclusion Fine particulates PM2.5 in environment may induce pulmonary oxidative lesions in rats. Middle-dose and high-dose Lianhua Qingwen has antagonist effece on the injuries induced by fine particulates.
基金Projects 2006C23075 supported by the Key Research Project of Zhejiang Province02J20101-19 by the Science Foundation of Ningbo City
文摘A new dual-layer granular bed filter for hot gas cleanup was invented and studied experimentally. Fine sand,0.5-1 mm grain size and about 1350 kg/m3 bulk density,was used as the lower layer of the filter. Expanded perlite par-ticles,2-5 mm grain size and about 70 kg/m3 bulk density,was used for the upper layer of the filter in this study. It was confirmed that the sizes and densities of these two media matched well; the binary media remained in complete segre-gation during regeneration by fluidization. Test results show that the filtration of the expanded perlite particle layer was characterized as "deep bed filtration." Filtration of the fine sand layer was "surface cake filtration." The expanded per-lite particle layer contributed about 90% to the bed dust capacity,but only about 20% to the total bed pressure drop,which increased the bed dust capacity ten fold compared to a single-layer bed of the same sand and the same total bed pressure drop. The dust cake on the surface of the fine sand layer raised the collection efficiencies to over 99.99%.
文摘An experimental system of diesel particulate filter(DPF)regeneration using non-thermal plasma(NTP)technology assisted by exhaust waste heat was conducted and regeneration experiments of DPFs with different amounts of trapped particulate matter(PM)were conducted.The concentrations of the PM decomposition products(CO,)and the internal temperature of the DPF were monitored to determine the performance of DPF regeneration and thermal safety of the NTP technology.The results showed that the concentrations of CO and CO2and the mass of P.V1 decomposition increased with the increase in the amount of captured PM,whereas the concentration of the NTP active substance(O,)escaping from the DPF decreased under the same working conditions of the NTP injection system.A higher amount of captured PM promoted the oxidative decomposition reaction between NTP and PM and improved the utilization rate of the NTP active substances.The peak temperature at the same measuring point inside the DPF generally increased and the phases of the peak temperature were delayed as the amount of captured PM increased.The temperature peaks and temperature gradients during the DPF regeneration process were far lower than llie failure limit value,which indicates that NTP regeneration technology has good thermal durability and increases the service life of the DPF.
基金the National Natural Science Foundation of China(Nos.51974065 and 52274257)the Open Foundation of State Key Laboratory of Mineral Processing(No.BGRIMMKJSKL-2020-13)the Fundamental Research Funds for the Central Universities(Nos.N2201008 and N2201004).
文摘The Euler-Euler model is less effective in capturing the free surface of flow film in the spiral separator,and thus a Eulerian multi-fluid volume of fluid(VOF)model was first proposed to describe the particulate flow in spiral separators.In order to improve the applicability of the model in the high solid concentration system,the Bagnold effect was incorporated into the modelling framework.The capability of the proposed model in terms of predicting the flow film shape in a LD9 spiral separator was evaluated via comparison with measured flow film thicknesses reported in literature.Results showed that sharp air–water and air-pulp interfaces can be obtained using the proposed model,and the shapes of the predicted flow films before and after particle addition were reasonably consistent with the observations reported in literature.Furthermore,the experimental and numerical simulation of the separation of quartz and hematite were performed in a laboratory-scale spiral separator.When the Bagnold lift force model was considered,predictions of the grade of iron and solid concentration by mass for different trough lengths were more consistent with experimental data.In the initial development stage,the quartz particles at the bottom of the flow layer were more possible to be lifted due to the Bagnold force.Thus,a better predicted vertical stratification between quartz and hematite particles was obtained,which provided favorable conditions for subsequent radial segregation.
基金the Western US Mining Safety and Health Training & Translation Center by the National Institute for Occupational Safety and Health (NIOSH) (No. 1R25OH008319)
文摘Diesel particulate matter(DPM) is considered carcinogenic after prolonged exposure. This paper used computational fluid dynamics(CFD) method to study the effect of four auxiliary ventilation systems on DPM distribution in a dead-end entry with loading operation. The auxiliary ventilation systems considered include: blower fan and tubing; exhaust fan and tubing, jet fan, and push–pull system. A species transport model with buoyancy effect was used to examine the DPM dispersion pattern with unsteady state analysis. During the 200 s of the loading operation, high DPM levels were identified in the face and dead-end entry regions. This study can be used for mining engineer as guidance to design and setup of local ventilation. It can also be used for selection of DPM control strategies and DPM annual training for underground miners.
基金supported by National Natural Science Foundation of China (No. 51806085)China Postdoctoral Science Foundation (No. 2018M642175)+2 种基金Jiangsu Planned Projects for Postdoctoral Research Fund (No. 2018K101C)Open Research Subject of Key Laboratory of Automotive Measurement, Control and Safety (Xihua University) (No. QCCK2021-007)the Graduate Student Innovation Fund Project of Jiangsu Province (No. KYCX21_3354)
文摘To compensate for the shortcomings of the thermal and catalytic regeneration of the diesel particulate filter(DPF),a self-designed packed-bed dielectric barrier discharge(DBD)reactor for DPF regeneration was developed.The DBD reactor with the main active substance of nonthermal plasma(NTP)as the target parameter was optimized by adjusting the feed gas,packing particles(material or size),and cooling water temperature.Moreover,a set of optimal working parameters(gas source,O_2;packing particles,1.2–1.4 mm ZrO_(2);and cooling water temperature,20℃)was selected to evaluate the effect of different O_(3) concentrations on DPF regeneration.The research results showed that selecting packing particles with high dielectric constant and large particles,as well as reducing the cooling water temperature,with oxygen as the feed gas,contributed to an increase in O_(3) concentration.During DPF regeneration,the following changes were observed:the power of the NTP reactor decreased to lower than 100 W,the O_(3) concentration increased from 15 g m^(-3) to 45 g m^(-3),the CO and CO_2 volume fractions of the particulate matter decomposition products increased,and the peak regeneration temperature increased to 173.4℃.The peak temperature arrival time was 60 min earlier,indicating that the regeneration rate of DPF increased with the increase in O_(3) concentration.However,the O_(3) utilization rate(the amount of carbon deposit removed per unit volume O_(3))initially increased and then decreased;when the O_(3) concentration was set to 25 g m^(-3),the highest O_(3) utilization rate was reached.The packed-bed DBD technology contributed to the increase in the concentration of NTP active substances and the regeneration efficiency of DPF.It provides a theoretical and experimental basis for high-efficiency regeneration of DPF at low temperatures(<200℃).
基金National Key Research and Development Program of China(2017YFB0306605)Key Laboratory of Engines at Tianjin University(Grant No.K2022-06).
文摘This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.
基金supported by the National Natural Science Foundation of China(Grant Nos.31988102 and 42141006)。
文摘Background: The loss of soil organic carbon(SOC) following conversion of natural forests to managed plantations has been widely reported. However, how different SOC fractions and microbial necromass C(MNC) respond to forest management practices remains unclear.Methods: We sampled 0–10 cm mineral soil from three different management plantations and one protected forest in Guangxi, Southern China, to explore how forest management practices affect SOC through changing mineralassociated C(MAOC) and particulate organic C(POC), as well as fungal and bacterial necromass C.Results: Compared with the protected forest, SOC and POC in the abandoned, mixed and Eucalyptus plantations significantly decreased, but MAOC showed no significant change, indicating that the loss of SOC was mainly from decreased POC under forest management. Forest management also significantly reduced root biomass, soil extractable organic C, MNC, and total microbial biomass(measured by phospholipid fatty acid), but increased fungi-to-bacteria ratio(F:B) and soil peroxidase activity. Moreover, POC was positively correlated with root biomass, total microbial biomass and MNC, and negatively with F:B and peroxidase activity. These results suggested that root input and microbial properties together regulated soil POC dynamics during forest management.Conclusion: Overall, this study indicates that forest management intervention significantly decreases SOC by reducing POC in Guangxi, Southern China, and suggests that forest protection can help to sequester more soil C in forest ecosystems.
基金National Key R&D Program of China(No.2018YFC0809700,No.2017YFC0803300)National Natural Science Foundation of China(No.71673158,No.11702046).
文摘Particulate composites are one of the widely used materials in producing numerous state-of-the-art components in biomedical,automobile,aerospace including defence technology.Variety of modelling techniques have been adopted in the past to model mechanical behaviour of particulate composites.Due to their favourable properties,particle-based methods provide a convenient platform to model failure or fracture of these composites.Smooth particle hydrodynamics(SPH)is one of such methods which demonstrate excellent potential for modelling failure or fracture of particulate composites in a Lagrangian setting.One of the major challenges in using SPH method for modelling composite materials depends on accurate and efficient way to treat interface and boundary conditions.In this paper,a masterslave method based multi-freedom constraints is proposed to impose essential boundary conditions and interfacial displacement constraints in modelling mechanical behaviour of composite materials using SPH method.The proposed methodology enforces the above constraints more accurately and requires only smaller condition number for system stiffness matrix than the procedures based on typical penalty function approach.A minimum cut-off value-based error criteria is employed to improve the computational efficiency of the proposed methodology.In addition,the proposed method is further enhanced by adopting a modified numerical interpolation scheme along the boundary to increase the accuracy and computational efficiency.The numerical examples demonstrate that the proposed master-slave approach yields better accuracy in enforcing displacement constraints and requires approximately the same computational time as that of penalty method.
基金Supported by the Natural Science Foundation of Zhejiang Province under Grant No LY15A050001the National Natural Science Foundation of China under Grant Nos 11247007 and 11374262the Open Fund of the State Key Laboratory of High-Field Laser Physics at SIOM
文摘Evolution of spatial distribution of charged particulates under the action of an external force is investigated. It is found that starting from a homogeneous Maxwellian distribution of particulates, clusters can form and aggregate. The evolution process, as well as the asymptotic number and configuration of the clusters formed, depends strongly on the strength of the external force. The particulates in most of the final clusters are in the crystal state, as can also be deduced from the corresponding velocity and auto-correlation functions.
文摘Gallium phosphide （GAP） nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by x-ray diffraction, high resolution transmission electron microscopy and field emission scanning electron microscopy. The film was further investigated by spectroscopic ellipsometry. After the model GaP＋void[SiO2 was built and an effective medium approximation was adopted, the values of the refractive index n and the extinction coefficient k were calculated for the energy range of 0.75 eV-4.0 eV using the dispersion formula in DeltaPsi2 software. The absorption coefficient of the film was calculated from its k and its energy gaps were further estimated according to the Tauc equation, which were further verified by its fluorescence spectrum measurement. The structure and optical absorption properties of the nanoparticulate films are promising for their potential applications in hybrid solar cells.
文摘Reducing the linear system of two first order equilibrium equations involving normal stress σ(ρ,θ) and shearing stress v(ρ,θ), by elimination, to two decoupled second order equations in σ and v, we find that, for pressure only case, v(ρ,θ) vanishes in the half space. Consequently, the second order equation in σ can be simplified. In the language of linear system analysis, the medium(system) function, characterizing the mechanical behavior of a particulate medium in pressure only case, is obtained from the simplified second order equation ( 2 ρ+ 2 θ)σ(ρ,θ)=0 and can be inverted to give impulse reponse explicitly. Thus, response σ α(ρ,θ) may be computed directly from input, i.e., the surface pressure φ α(ρ) , by integration. Some explicit formulas for transmission problems, including response to input of strip linearly increasing pressure, are given in the paper.
基金Sponsored by the National "973" Program Projects(652345)
文摘A concise formula for computing radiation heat flow of in-cylinder soot is presented, based on the assumptions that in-cylinder heat transfer of diesel engines is a quasi-equilibrium process and in-cylinder soot particles are spherical. That in this formula there consist neither constants needing adjustments nor variables related to engine types or operating conditions makes it universal and easy to use. Also it can be seen from the formula that radiation heat transfer is proportional to the quotient of in-cylinder soot mass over the average radius of primary particles. Besides, with the help of different algorithms it can be used for predicting cylinders＇ global as well as local radiation heat flows. As a demonstrative application on its global facet, a three-dimension simulation study about the soot-radiation-related heat flow in the combustion chamber of a diesel engine is carried out. Results show that the range of the soot-radiation-related heat flow computed by this formula agrees well with other researcher＇s earlier theoretic reasoning and experimental measurements.
基金supported by the Special Funds for the National Basic Research Program of China(Grant No.2012CB025904)the National Natural ScienceFoundation of China(Grant Nos.90916027 and 11302052)
文摘This paper focuses on the dynamic thermo-mechanical coupled response of random particulate composite materials. Both the inertia term and coupling term are considered in the dynamic coupled problem. The formulation of the problem by a statistical second-order two-scale （SSOTS） analysis method and the algorithm procedure based on the finite-element difference method are presented. Numerical results of coupled cases are compared with those of uncoupled cases. It shows that the coupling effects on temperature, thermal flux, displacement, and stresses are very distinct, and the micro- characteristics of particles affect the coupling effect of the random composites. Furthermore, the coupling effect causes a lag in the variations of temperature, thermal flux, displacement, and stresses.
文摘General solution of stresses solved from the two dimensiona l system of equilibrium equations in Cartesian coordinates is characterized by the presence of two families of characteristic lines along which initial stresses and discontinuities in them are transmitted intact far down to infinity.This is against our intuition and not verifiable by experimental findings. For the fundamental case of infinite uniform pressure on the upper surface,a comparison between solutions from equilibrium equations in Cartesian coordinates and from those in polar coordinates is carried out in details.The semi infinite characteristic lines in the former are bent up to exponential spirals with both ends on the upper surface in the latter.Thus,the transmission pattern from solution in polar coordinates comes closer to actual situation.However,in polar reference frame,the solution for distribution of stresses in particulate half space under surface strip pressure or so can then only be obtained from boundary value problem of second order partial differential equation.
基金supported by Science & Development Foundation of CAEP(Grant No.2015B0402085)
文摘Particulates generated from electrode erosion in gas spark gap is inevitable and may initiate selfbreakdown behavior with high risk.Traditionally,this problem is addressed by empirical method qualitatively.To push this old problem forward,this paper conducts laser confocal microscopy measurement of eroded surface and a statistical method is introduced to obtain visualization of particulates distribution from electrode erosion after different shots.This method allows dense particulates to be classified with their heights in z direction and scattered figures of particulates within certain height range are obtained.Results indicate that the higher-than-10 μm particulates start to emerge after 200 discharge shots and particulates number has a waved radial distribution with a 0.5 mm wide deposition zone.Based on these quantitative results,the risk of reignition and field-distortion failure that are triggered by particulates can be assessed.
文摘Based on a model of two stress tensors possessing high fluidity, a statically determinate system of partial difference equations of equilibrium has been derived for use to particulate media of such nature. Through non dimensionalization of independent and dependent variables, the system passes into that of partial differential equations. Although the statically determinate system of partial differential equations is non linear, yet the two dimensional one falls apart into three separate groups which can be solved easily one after another.
基金Funded by Academician Foundation of Chongqing Project (2002-6285).
文摘In this paper, we proposed a five-zone model to predict the elastic modulus of particulate reinforced metal matrix composite. We simplified the calculation by ignoring structural parameters including particulate shape, arrangement pattern and dimensional variance mode which have no obvious influence on the elastic modulus of a composite, and improved the precision of the method by stressing the interaction of interfaces with pariculates and maxtrix of the composite. The five- zone model can reflect effects of interface modulus on elastic modulus of composite. It overcomes limitations of expressions of rigidity mixed law and flexibility mixed law. The original idea of five zone model is to put forward the particulate/interface interactive zone and matrix/interface interactive zone. By organically integrating the rigidity mixed law and flexibility mixed law, the model can predict the engineering elastic constant of a composite effectively.
