In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method...In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.展开更多
A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.Acc...A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.According to the different characters of covariance matrix and general steering vector of the array received source,a second order blind identification method is used to separate the sources,the mixing matrix could be obtained.From the mixing matrix,the type of the source is identified by using an amplitude criterion.And the direction of arrival for the array received source is estimated by using the matching pursuit algorithm from the vectors of the mixing matrix.Computer simulations validate the efficiency of the method.展开更多
Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the...Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the soil thermal conductivity had been known in the simulation of thermal response test.The thermal response curve was firstly obtained through numerical calculation.Then,the accuracy of the numerical model was verified with measured data obtained through a thermal response test.Based on the numerical and experimental thermal response curves,the thermal conductivity of the soil was calculated by different parameter identification methods.The calculated results were compared with the assumed value and then the accuracy of these methods was evaluated.Furthermore,the effects of test time,variable data quality,borehole radius,initial ground temperature,and heat injection rate were analyzed.The results show that the method based on cylinder-source model has a low precision and the identified thermal conductivity decreases with an increase in borehole radius.For parameter estimation,the measuring accuracy of the initial temperature of the deep ground soil has greater effect on identified thermal conductivity.展开更多
The basic principles of the partial and multiple coherence ananlysis and their utilization on vibration source identification are discussed in detail in this paper. The partial coherence analysis is the effective meth...The basic principles of the partial and multiple coherence ananlysis and their utilization on vibration source identification are discussed in detail in this paper. The partial coherence analysis is the effective method of vibration source identification in multiple input single output systems.Formerly, there was not any this kind of function in the signal processor, and there was not any special software too. The software which we developed and used in the 7T 17S signal processor has this function. This software can be used not only for the partial and multiple coherence analysis of signal, but also for the correlation analysis, power spectrum analysis, transfer function analysis et al.We used this software to make the identifcation of the vibration source of the car floor board of electrical measuring vehicle, and to find the main factors which effect the vibration of the car board.The excellent result was obtained. This method can also be used for making the identifications of noise source and other sources.展开更多
A new methodology was proposed for contamination source identification using information provided by consumer complaints from a probabilistic view.Due to the high uncertainties of information derived from users,the ob...A new methodology was proposed for contamination source identification using information provided by consumer complaints from a probabilistic view.Due to the high uncertainties of information derived from users,the objective of the proposed methodology doesn't aim to capture a unique solution,but to minimize the number of possible contamination sources.In the proposed methodology,all the possible pollution nodes are identified through the CSA methodology firstly.And then based on the principle of total probability formula,the probability of each possible contamination node is obtained through a series of calculation.According to magnitude of the probability,the number of possible pollution nodes is minimized.The effectiveness and feasibility of the methodology is demonstrated through an application to a real case of ZJ City.Four scenarios were designed to investigate the influence of different uncertainties on the results in this case.The results show that pollutant concentration,injection duration,the number of consumer complaints nodes used for calculation and the prior probability with which consumers would complaint have no particular effect on the identification of contamination source.Three nodes were selected as the most possible pollution sources in water pipe network of ZJ City which includes more than 3 000 nodes.The results show the potential of the proposed method to identify contamination source through consumer complaints.展开更多
Warehouse operation has become a critical activity in supply chain. Position information of pallets is important in warehouse management which can enhance the efficiency of pallets picking and sortation. Radio frequen...Warehouse operation has become a critical activity in supply chain. Position information of pallets is important in warehouse management which can enhance the efficiency of pallets picking and sortation. Radio frequency identification(RFID) has been widely used in warehouse for item identifying. Meanwhile, RFID technology also has great potential for pallets localization which is underutilized in warehouse management. RFID-based checking-in and inventory systems have been applied in warehouse management by many enterprises. Localization approach is studied, which is compatible with existing RFID checking-in and inventory systems. A novel RFID localization approach is proposed for pallets checking-in. Phase variation of nearby tags was utilized to estimate the position of added pallets. A novel inventory localization approach combing angle of arrival(AOA) measurement and received signal strength(RSS) is also proposed for pallets inventory. Experiments were carried out using standard UHF passive RFID system. Experimental results show an acceptable localization accuracy which can satisfy the requirement of warehouse management.展开更多
For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and relea...For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and release time of a single constant contaminant source by using real sensors was presented. The method was numerically demonstrated and validated by a case study of contaminant release in a three-dimensional office. The effects of the measurement errors and total sampling period of sensor on the performance of source identification were thoroughly studied. The results indicate that the adverse effects of the measurement errors can be mitigated by extending the total sampling period. For reaching a desirable accuracy of source identification, the total sampling period should exceed a certain threshold, which can be determined by repeatedly running the identification method tmtil the results tend to be stable. The method presented can contribute to develop an onsite source identification system for protecting occupants from indoor releases.展开更多
Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were withi...Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were within the allowed standard of China’s safe water guideline. The hazard quotients （HQ） and the hazard index （HI） value levels of all the five heavy metals in all sampling sites did not exceed the acceptable risk limits of non-carcinogenic value through the selected assessment method. Pearson’s correlation analysis and principal component analysis （PCA） indicated that Zn and Cu mainly originated from the natural alluviation and non-point agricultural sources, whereas Cr and As were mainly derived from industrial effluents. Moreover, Cd mainly originated from both non-point agricultural and industrial pollution sources. In addition, cluster analysis （CA） implied that cluster 1 （including S3, S5, S6 and S10） was considered the set of high pollution sites and cluster 2 （including S4 and S9） was identified as the set of moderate pollution sites.展开更多
In order to deal with the complex association relationships between classes in an object-oriented software system,a novel approach for identifying refactoring opportunities is proposed.The approach can be used to dete...In order to deal with the complex association relationships between classes in an object-oriented software system,a novel approach for identifying refactoring opportunities is proposed.The approach can be used to detect complex and duplicated many-to-many association relationships in source code,and to provide guidance for further refactoring.In the approach,source code is first transformed to an abstract syntax tree from which all data members of each class are extracted,then each class is characterized in connection with a set of association classes saving its data members.Next,classes in common associations are obtained by comparing different association classes sets in integrated analysis.Finally,on condition of pre-defined thresholds,all class sets in candidate for refactoring and their common association classes are saved and exported.This approach is tested on 4 projects.The results show that the precision is over 96%when the threshold is 3,and 100%when the threshold is 4.Meanwhile,this approach has good execution efficiency as the execution time taken for a project with more than 500 classes is less than 4 s,which also indicates that it can be applied to projects of different scales to identify their refactoring opportunities effectively.展开更多
【目的】为厘清流域面源污染源结构、精细化解析面源污染负荷时空特征,【方法】以SWAT(Soil and Water Assessment Tool)流域面源污染模型为基础,选取代表性水文系列,结合入库污染负荷计算模型,构建了污染负荷量及入库强度的面源污染关...【目的】为厘清流域面源污染源结构、精细化解析面源污染负荷时空特征,【方法】以SWAT(Soil and Water Assessment Tool)流域面源污染模型为基础,选取代表性水文系列,结合入库污染负荷计算模型,构建了污染负荷量及入库强度的面源污染关键源区识别技术流程,并在数据条件较为完备的沙河水库流域进行验证。【结果】结果表明:沙河水库流域总氮(Total Nitrogen,TN)入库负荷总量为198.34 t/a,面源污染占比为86.53%,流域内茶园TN负荷量贡献率最大,占比为23.84%;TN负荷量在丰水年和特丰水年比枯水年上升58.06%和289.09%,在年内丰水期TN月均负荷量比平水期和枯水期分别高出75.24%和372.51%;河道削减TN负荷量为33.58 t/a,削减比例为14.48%;子流域TN入库产污强度变化范围为0.36~4.73 t/km^(2)。面源污染排放入库低值区主要位于流域南部,高值区主要位于近库区域,沙河西和沙河东控制分区单位面积TN入库强度显著高于流域南部。【结论】针对高产污地类、高产污区域及高产污时段应提高面源污染防控力度;建立的技术流程可有效识别和科学解析流域面源污染关键源区,为流域水环境开展面源污染防治和生态适应性开发提供一定技术支持,使相关工作开展更加有的放矢。展开更多
基金supported by the National Natural Science Foundation of China(62073093)the initiation fund for postdoctoral research in Heilongjiang Province(LBH-Q19098)the Natural Science Foundation of Heilongjiang Province(LH2020F017).
文摘In order to solve the problem that the performance of traditional localization methods for mixed near-field sources(NFSs)and far-field sources(FFSs)degrades under impulsive noise,a robust and novel localization method is proposed.After eliminating the impacts of impulsive noise by the weighted out-lier filter,the direction of arrivals(DOAs)of FFSs can be estimated by multiple signal classification(MUSIC)spectral peaks search.Based on the DOAs information of FFSs,the separation of mixed sources can be performed.Finally,the estimation of localizing parameters of NFSs can avoid two-dimension spectral peaks search by decomposing steering vectors.The Cramer-Rao bounds(CRB)for the unbiased estimations of DOA and range under impulsive noise have been drawn.Simulation experiments verify that the proposed method has advantages in probability of successful estimation(PSE)and root mean square error(RMSE)compared with existing localization methods.It can be concluded that the proposed method is effective and reliable in the environment with low generalized signal to noise ratio(GSNR),few snapshots,and strong impulse.
文摘A novel identification method for point source,coherently distributed（CD） source and incoherently distributed（ICD） source is proposed.The differences among the point source,CD source and ICD source are studied.According to the different characters of covariance matrix and general steering vector of the array received source,a second order blind identification method is used to separate the sources,the mixing matrix could be obtained.From the mixing matrix,the type of the source is identified by using an amplitude criterion.And the direction of arrival for the array received source is estimated by using the matching pursuit algorithm from the vectors of the mixing matrix.Computer simulations validate the efficiency of the method.
基金Project(xjj20100078) supported by the Fundamental Research Funds for the Central Universities in China
文摘Several parameter identification methods of thermal response test were evaluated through numerical and experimental study.A three-dimensional finite-volume numerical model was established under the assumption that the soil thermal conductivity had been known in the simulation of thermal response test.The thermal response curve was firstly obtained through numerical calculation.Then,the accuracy of the numerical model was verified with measured data obtained through a thermal response test.Based on the numerical and experimental thermal response curves,the thermal conductivity of the soil was calculated by different parameter identification methods.The calculated results were compared with the assumed value and then the accuracy of these methods was evaluated.Furthermore,the effects of test time,variable data quality,borehole radius,initial ground temperature,and heat injection rate were analyzed.The results show that the method based on cylinder-source model has a low precision and the identified thermal conductivity decreases with an increase in borehole radius.For parameter estimation,the measuring accuracy of the initial temperature of the deep ground soil has greater effect on identified thermal conductivity.
文摘The basic principles of the partial and multiple coherence ananlysis and their utilization on vibration source identification are discussed in detail in this paper. The partial coherence analysis is the effective method of vibration source identification in multiple input single output systems.Formerly, there was not any this kind of function in the signal processor, and there was not any special software too. The software which we developed and used in the 7T 17S signal processor has this function. This software can be used not only for the partial and multiple coherence analysis of signal, but also for the correlation analysis, power spectrum analysis, transfer function analysis et al.We used this software to make the identifcation of the vibration source of the car floor board of electrical measuring vehicle, and to find the main factors which effect the vibration of the car board.The excellent result was obtained. This method can also be used for making the identifications of noise source and other sources.
基金Project(50908165) supported by the National Natural Science Foundation of China
文摘A new methodology was proposed for contamination source identification using information provided by consumer complaints from a probabilistic view.Due to the high uncertainties of information derived from users,the objective of the proposed methodology doesn't aim to capture a unique solution,but to minimize the number of possible contamination sources.In the proposed methodology,all the possible pollution nodes are identified through the CSA methodology firstly.And then based on the principle of total probability formula,the probability of each possible contamination node is obtained through a series of calculation.According to magnitude of the probability,the number of possible pollution nodes is minimized.The effectiveness and feasibility of the methodology is demonstrated through an application to a real case of ZJ City.Four scenarios were designed to investigate the influence of different uncertainties on the results in this case.The results show that pollutant concentration,injection duration,the number of consumer complaints nodes used for calculation and the prior probability with which consumers would complaint have no particular effect on the identification of contamination source.Three nodes were selected as the most possible pollution sources in water pipe network of ZJ City which includes more than 3 000 nodes.The results show the potential of the proposed method to identify contamination source through consumer complaints.
基金Project(2009BADB9B09)supported by the National Key Technologies R&D Program of China
文摘Warehouse operation has become a critical activity in supply chain. Position information of pallets is important in warehouse management which can enhance the efficiency of pallets picking and sortation. Radio frequency identification(RFID) has been widely used in warehouse for item identifying. Meanwhile, RFID technology also has great potential for pallets localization which is underutilized in warehouse management. RFID-based checking-in and inventory systems have been applied in warehouse management by many enterprises. Localization approach is studied, which is compatible with existing RFID checking-in and inventory systems. A novel RFID localization approach is proposed for pallets checking-in. Phase variation of nearby tags was utilized to estimate the position of added pallets. A novel inventory localization approach combing angle of arrival(AOA) measurement and received signal strength(RSS) is also proposed for pallets inventory. Experiments were carried out using standard UHF passive RFID system. Experimental results show an acceptable localization accuracy which can satisfy the requirement of warehouse management.
基金Project(50908128) supported by the National Natural Science Foundation of ChinaProject(51125030) supported by the National Science Foundation for Distinguished Young Scholars in China
文摘For the release of hazardous contaminant indoors, source identification is critical for developing effective response measures. A method which can quickly and accurately identify the position, emission rate, and release time of a single constant contaminant source by using real sensors was presented. The method was numerically demonstrated and validated by a case study of contaminant release in a three-dimensional office. The effects of the measurement errors and total sampling period of sensor on the performance of source identification were thoroughly studied. The results indicate that the adverse effects of the measurement errors can be mitigated by extending the total sampling period. For reaching a desirable accuracy of source identification, the total sampling period should exceed a certain threshold, which can be determined by repeatedly running the identification method tmtil the results tend to be stable. The method presented can contribute to develop an onsite source identification system for protecting occupants from indoor releases.
基金Projects(51578222,51178172) supported by the National Natural Science Foundation of ChinaProjects(17Z017,17G025) supported by the Humanities and Social Science Project of Hubei Provincial Education Department,China+1 种基金Project(1718WT15) supported by the Hubei College Student Affairs Research Institute,ChinaProjects(2016J1410,2016J1411) supported by the Graduate Innovative Education Program of Zhongnan University of Economics and Law,China
文摘Five trace elements including Zn, Cu, Cd, Cr and As were investigated in surface water from ten typical sampling sites in Honghu Lake. The consequence indicated that all of the detected trace element levels were within the allowed standard of China’s safe water guideline. The hazard quotients （HQ） and the hazard index （HI） value levels of all the five heavy metals in all sampling sites did not exceed the acceptable risk limits of non-carcinogenic value through the selected assessment method. Pearson’s correlation analysis and principal component analysis （PCA） indicated that Zn and Cu mainly originated from the natural alluviation and non-point agricultural sources, whereas Cr and As were mainly derived from industrial effluents. Moreover, Cd mainly originated from both non-point agricultural and industrial pollution sources. In addition, cluster analysis （CA） implied that cluster 1 （including S3, S5, S6 and S10） was considered the set of high pollution sites and cluster 2 （including S4 and S9） was identified as the set of moderate pollution sites.
文摘In order to deal with the complex association relationships between classes in an object-oriented software system,a novel approach for identifying refactoring opportunities is proposed.The approach can be used to detect complex and duplicated many-to-many association relationships in source code,and to provide guidance for further refactoring.In the approach,source code is first transformed to an abstract syntax tree from which all data members of each class are extracted,then each class is characterized in connection with a set of association classes saving its data members.Next,classes in common associations are obtained by comparing different association classes sets in integrated analysis.Finally,on condition of pre-defined thresholds,all class sets in candidate for refactoring and their common association classes are saved and exported.This approach is tested on 4 projects.The results show that the precision is over 96%when the threshold is 3,and 100%when the threshold is 4.Meanwhile,this approach has good execution efficiency as the execution time taken for a project with more than 500 classes is less than 4 s,which also indicates that it can be applied to projects of different scales to identify their refactoring opportunities effectively.
文摘【目的】为厘清流域面源污染源结构、精细化解析面源污染负荷时空特征,【方法】以SWAT(Soil and Water Assessment Tool)流域面源污染模型为基础,选取代表性水文系列,结合入库污染负荷计算模型,构建了污染负荷量及入库强度的面源污染关键源区识别技术流程,并在数据条件较为完备的沙河水库流域进行验证。【结果】结果表明:沙河水库流域总氮(Total Nitrogen,TN)入库负荷总量为198.34 t/a,面源污染占比为86.53%,流域内茶园TN负荷量贡献率最大,占比为23.84%;TN负荷量在丰水年和特丰水年比枯水年上升58.06%和289.09%,在年内丰水期TN月均负荷量比平水期和枯水期分别高出75.24%和372.51%;河道削减TN负荷量为33.58 t/a,削减比例为14.48%;子流域TN入库产污强度变化范围为0.36~4.73 t/km^(2)。面源污染排放入库低值区主要位于流域南部,高值区主要位于近库区域,沙河西和沙河东控制分区单位面积TN入库强度显著高于流域南部。【结论】针对高产污地类、高产污区域及高产污时段应提高面源污染防控力度;建立的技术流程可有效识别和科学解析流域面源污染关键源区,为流域水环境开展面源污染防治和生态适应性开发提供一定技术支持,使相关工作开展更加有的放矢。
