The severe erosion and inadequate mechanical strength are prominent challenges for high-energy gun propellants.To address it,novel PTW@PDA composites was prepared by polydopamine(PDA)-modifying onto potassium titanate...The severe erosion and inadequate mechanical strength are prominent challenges for high-energy gun propellants.To address it,novel PTW@PDA composites was prepared by polydopamine(PDA)-modifying onto potassium titanate whisker(PTW,K_(2)Ti_(6)O_(13)),and after was incorporated into gun propellant as erosion-reducing and mechanical-reinforcing fillers.The interfacial characterizations results indicated that as-prepared PTW@PDA composites exhibits an enhanced surface compatible with propellant matrix,thereby facilitating their dispersion into propellants more effectively than raw PTW materials.Compared to original propellants,PTW@PDA-modified propellants exhibited significant less erosion,with a Ti-Kbased protective coating being detected on the eroded steel.And 0.5 wt%and 1.0 wt%addition of PTW@PDA significantly improved impact,compressive and tensile strength of propellants.Despite the inevitably reduction in relative force,PTW@PDA slightly increase propellant burning rate while exerting little adverse impact on propellant dynamic activity.This strategy can provide a promising alternative to develop high-energy gun propellant with less erosion and more mechanical strength.展开更多
With the development of high energy solid propellants,it is critical to evaluate the safety and power performance of solid propellants in the face of threats such as unmanned aerial vehicles(UAVs)when transporting and...With the development of high energy solid propellants,it is critical to evaluate the safety and power performance of solid propellants in the face of threats such as unmanned aerial vehicles(UAVs)when transporting and using them in contemporary warfare.An electric probe-type cylinder test measured the displacement-time behavior of NEPE high-energy solid propellant,and the parameters of the Jones-Wilkins-Lee(JWL)equation of state(EOS)were derived using particle swarm optimization(PSO)with the Gurney energy model.Further,the parameters of JWL-Miller EOS,determined through AUTODYN simulations,were validated by comparing airburst process simulations with experimental overpressure data.The study established a method for determining EOS parameters of high-energy propellants,achieving a high degree of accuracy.The derived parameters ensure precise modeling of propellant behavior,offering a reliable foundation for future applications in solid rocket motor performance optimization and safety assessment.展开更多
The simulation of compression and fracture of charge bed in chamber is one of the key problems in the study of launch safety of gun propellant charge. A new kind of experimental device that can be used for simulation ...The simulation of compression and fracture of charge bed in chamber is one of the key problems in the study of launch safety of gun propellant charge. A new kind of experimental device that can be used for simulation is given. Its structure and operational principle are introduced. Using a semi-closed vessel as a source of compression force, the device can simulate any kind of dynamic environment in a gun propellant charge. Using the low temperature inert gas （N2） as the compression medium, the device can not only ensure that the simulation is real, but also protect the fragmentized propellant from combustion after experiment. Using the device, many simulation experiments have been accomplished, and dynamic environment of propellant fracture is acquired. With the experiments, fragmentized propellant for the compression and fracture of charge bed is obtained. Results of experiments show that the new device can be used to study the principle of the compression and fracture of charge bed.展开更多
Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of ...Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.展开更多
Smart materials,which exhibit shape memory behavior in response to external stimuli,have shown great potential for use in biomedical applications.In this study,an energetic composite was fabricated using a UV-assisted...Smart materials,which exhibit shape memory behavior in response to external stimuli,have shown great potential for use in biomedical applications.In this study,an energetic composite was fabricated using a UV-assisted DIW 3D printing technique and a shape memory material(SMP)as the binder.This composite has the ability to reduce the impact of external factors and adjust gun propellant combustion behavior.The composition and 3D printing process were delineated,while the internal structure and shape memory performance of the composite material were studied.The energetic SMP composite exhibits an angle of reversal of 18 s at 70°,with a maximum elongation typically reaching up to 280% of the original length and a recovery length of approximately 105%during ten cycles.Additionally,thermal decomposition and combustion behavior were also demonstrated for the energetic SMP composite.展开更多
Cellulose acetate nitrate(CAN) was used as an insensitive energetic binder to improve the insensitive munitions(IM) properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges.CAN conta...Cellulose acetate nitrate(CAN) was used as an insensitive energetic binder to improve the insensitive munitions(IM) properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges.CAN contains the energetic nitro groups found in nitrocellulose(NC),but also acetyl functionalities,which lowered the polymer's sensitivity to heat and shock,and therefore improved its IM properties relative to NC.The formulation,development and small-scale characterization testing of several CAN-based propellants were done.The formulations,using insensitive energetic solid fillers and high-nitrogen modifiers in place of nitramine were completed.The small scale characterization testing,such as closed bomb testing,small scale sensitivity,thermal stability,and chemical compatibility were done.The mechanical response of the propellants under high-rate uni-axial compression at,hot,cold,and ambient temperatures were also completed.Critical diameter testing,hot fragment conductive ignition(HFCI) tests were done to evaluate the propellants' responses to thermal and shock stimuli.Utilizing the propellant chemical composition,theoretical predictions of erosivity were completed.All the small scale test results were utilized to down-select the promising CAN based formulations for large scale demonstration testing such as the ballistic performance and fragment impact testing in the105 mm M67 artillery charge configurations.The test results completed in the small and large scale testing are discussed.展开更多
The U.S. military has a need for more powerful propellants with balanced/stoichiometric amounts of fuel and oxidants. However, balanced and more powerful propellants lead to accelerated gun barrel erosion and markedly...The U.S. military has a need for more powerful propellants with balanced/stoichiometric amounts of fuel and oxidants. However, balanced and more powerful propellants lead to accelerated gun barrel erosion and markedly shortened useful barrel life. Boron nitride(BN) is an interesting potential additive for propellants that could reduce gun wear effects in advanced propellants(US patent pending 2015-026P). Hexagonal boron nitride is a good lubricant that can provide wear resistance and lower flame temperatures for gun barrels. Further, boron can dope steel, which drastically improves its strength and wear resistance, and can block the formation of softer carbides. A scalable synthesis method for producing boron nitride nano-particles that can be readily dispersed into propellants has been developed. Even dispersion of the nano-particles in a double-base propellant has been demonstrated using a solvent-based processing approach. Stability of a composite propellant with the BN additive was verified. In this paper, results from propellant testing of boron nitride nano-composite propellants are presented, including closed bomb and wear and erosion testing. Detailed characterization of the erosion tester substrates before and after firing was obtained by electron microscopy,inductively coupled plasma and x-ray photoelectron spectroscopy. This promising boron nitride additive shows the ability to improve gun wear and erosion resistance without any destabilizing effects to the propellant. Potential applications could include less erosive propellants in propellant ammunition for large, medium and small diameter fire arms.展开更多
The experimental modal analysis of the selected self-propelled gun was completed to obtain its modal frequency distribution and modes by using an operational modal analysis experimental technique.The result obtained b...The experimental modal analysis of the selected self-propelled gun was completed to obtain its modal frequency distribution and modes by using an operational modal analysis experimental technique.The result obtained by the method was compared with that obtained by the traditional method.It indicates that the two results are in good agreement.展开更多
From the view point of launch safety caused by fracture of propellant charge,this paper points out that the safety criterion of pressure wave is inadequate to evaluate the launch safety of propellant charge based on t...From the view point of launch safety caused by fracture of propellant charge,this paper points out that the safety criterion of pressure wave is inadequate to evaluate the launch safety of propellant charge based on the initial negative differential pressure and sensitivity tests.Generally,the maximum barrel pressure does not depend upon the intensity of pressure wave correspondingly.The pressure wave intensity can not describe the fracture degree of propellant charge in chamber and reflect the mechanical environment of propellant charge fracturing exactly and wholly.The evaluation criterion for launch safety of propellant charge should be built on the basis of depicting the fracture degree of propellant bed.展开更多
This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gun...This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.展开更多
基金the support of the instrument and equipment fund of the Key Laboratory of Special Energy,Ministry of Education,Nanjing University of Science and Technology,China.
文摘The severe erosion and inadequate mechanical strength are prominent challenges for high-energy gun propellants.To address it,novel PTW@PDA composites was prepared by polydopamine(PDA)-modifying onto potassium titanate whisker(PTW,K_(2)Ti_(6)O_(13)),and after was incorporated into gun propellant as erosion-reducing and mechanical-reinforcing fillers.The interfacial characterizations results indicated that as-prepared PTW@PDA composites exhibits an enhanced surface compatible with propellant matrix,thereby facilitating their dispersion into propellants more effectively than raw PTW materials.Compared to original propellants,PTW@PDA-modified propellants exhibited significant less erosion,with a Ti-Kbased protective coating being detected on the eroded steel.And 0.5 wt%and 1.0 wt%addition of PTW@PDA significantly improved impact,compressive and tensile strength of propellants.Despite the inevitably reduction in relative force,PTW@PDA slightly increase propellant burning rate while exerting little adverse impact on propellant dynamic activity.This strategy can provide a promising alternative to develop high-energy gun propellant with less erosion and more mechanical strength.
基金supported by"the Fundamental Research Funds for the Central Universities",No.30924010503.
文摘With the development of high energy solid propellants,it is critical to evaluate the safety and power performance of solid propellants in the face of threats such as unmanned aerial vehicles(UAVs)when transporting and using them in contemporary warfare.An electric probe-type cylinder test measured the displacement-time behavior of NEPE high-energy solid propellant,and the parameters of the Jones-Wilkins-Lee(JWL)equation of state(EOS)were derived using particle swarm optimization(PSO)with the Gurney energy model.Further,the parameters of JWL-Miller EOS,determined through AUTODYN simulations,were validated by comparing airburst process simulations with experimental overpressure data.The study established a method for determining EOS parameters of high-energy propellants,achieving a high degree of accuracy.The derived parameters ensure precise modeling of propellant behavior,offering a reliable foundation for future applications in solid rocket motor performance optimization and safety assessment.
文摘The simulation of compression and fracture of charge bed in chamber is one of the key problems in the study of launch safety of gun propellant charge. A new kind of experimental device that can be used for simulation is given. Its structure and operational principle are introduced. Using a semi-closed vessel as a source of compression force, the device can simulate any kind of dynamic environment in a gun propellant charge. Using the low temperature inert gas （N2） as the compression medium, the device can not only ensure that the simulation is real, but also protect the fragmentized propellant from combustion after experiment. Using the device, many simulation experiments have been accomplished, and dynamic environment of propellant fracture is acquired. With the experiments, fragmentized propellant for the compression and fracture of charge bed is obtained. Results of experiments show that the new device can be used to study the principle of the compression and fracture of charge bed.
文摘Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.
文摘Smart materials,which exhibit shape memory behavior in response to external stimuli,have shown great potential for use in biomedical applications.In this study,an energetic composite was fabricated using a UV-assisted DIW 3D printing technique and a shape memory material(SMP)as the binder.This composite has the ability to reduce the impact of external factors and adjust gun propellant combustion behavior.The composition and 3D printing process were delineated,while the internal structure and shape memory performance of the composite material were studied.The energetic SMP composite exhibits an angle of reversal of 18 s at 70°,with a maximum elongation typically reaching up to 280% of the original length and a recovery length of approximately 105%during ten cycles.Additionally,thermal decomposition and combustion behavior were also demonstrated for the energetic SMP composite.
文摘Cellulose acetate nitrate(CAN) was used as an insensitive energetic binder to improve the insensitive munitions(IM) properties of gun propellants to replace the M1 propellant used in 105 mm artillery charges.CAN contains the energetic nitro groups found in nitrocellulose(NC),but also acetyl functionalities,which lowered the polymer's sensitivity to heat and shock,and therefore improved its IM properties relative to NC.The formulation,development and small-scale characterization testing of several CAN-based propellants were done.The formulations,using insensitive energetic solid fillers and high-nitrogen modifiers in place of nitramine were completed.The small scale characterization testing,such as closed bomb testing,small scale sensitivity,thermal stability,and chemical compatibility were done.The mechanical response of the propellants under high-rate uni-axial compression at,hot,cold,and ambient temperatures were also completed.Critical diameter testing,hot fragment conductive ignition(HFCI) tests were done to evaluate the propellants' responses to thermal and shock stimuli.Utilizing the propellant chemical composition,theoretical predictions of erosivity were completed.All the small scale test results were utilized to down-select the promising CAN based formulations for large scale demonstration testing such as the ballistic performance and fragment impact testing in the105 mm M67 artillery charge configurations.The test results completed in the small and large scale testing are discussed.
基金supported by the US ARMY RDECOM Tech Base ProgramSmall Business Innovation Research (SBIR) Army Contract Number W15QKN-12-C-0041
文摘The U.S. military has a need for more powerful propellants with balanced/stoichiometric amounts of fuel and oxidants. However, balanced and more powerful propellants lead to accelerated gun barrel erosion and markedly shortened useful barrel life. Boron nitride(BN) is an interesting potential additive for propellants that could reduce gun wear effects in advanced propellants(US patent pending 2015-026P). Hexagonal boron nitride is a good lubricant that can provide wear resistance and lower flame temperatures for gun barrels. Further, boron can dope steel, which drastically improves its strength and wear resistance, and can block the formation of softer carbides. A scalable synthesis method for producing boron nitride nano-particles that can be readily dispersed into propellants has been developed. Even dispersion of the nano-particles in a double-base propellant has been demonstrated using a solvent-based processing approach. Stability of a composite propellant with the BN additive was verified. In this paper, results from propellant testing of boron nitride nano-composite propellants are presented, including closed bomb and wear and erosion testing. Detailed characterization of the erosion tester substrates before and after firing was obtained by electron microscopy,inductively coupled plasma and x-ray photoelectron spectroscopy. This promising boron nitride additive shows the ability to improve gun wear and erosion resistance without any destabilizing effects to the propellant. Potential applications could include less erosive propellants in propellant ammunition for large, medium and small diameter fire arms.
文摘The experimental modal analysis of the selected self-propelled gun was completed to obtain its modal frequency distribution and modes by using an operational modal analysis experimental technique.The result obtained by the method was compared with that obtained by the traditional method.It indicates that the two results are in good agreement.
基金Sponsored by National Defence Prestudy Foundation of China(40406010401)
文摘From the view point of launch safety caused by fracture of propellant charge,this paper points out that the safety criterion of pressure wave is inadequate to evaluate the launch safety of propellant charge based on the initial negative differential pressure and sensitivity tests.Generally,the maximum barrel pressure does not depend upon the intensity of pressure wave correspondingly.The pressure wave intensity can not describe the fracture degree of propellant charge in chamber and reflect the mechanical environment of propellant charge fracturing exactly and wholly.The evaluation criterion for launch safety of propellant charge should be built on the basis of depicting the fracture degree of propellant bed.
基金supported by the National Research Centre,Poland [grant number DOB-BIO8/05/01/2016]the Ministry of Defence of Poland [grant number GBMON/13-988/2018/WAT]
文摘This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.
