Carbon materials with adjustable porosity,controllable het-eroatom doping and low-cost have been received considerable attention as supercapacitor electrodes.However,using carbon materials with abundant micropores,a h...Carbon materials with adjustable porosity,controllable het-eroatom doping and low-cost have been received considerable attention as supercapacitor electrodes.However,using carbon materials with abundant micropores,a high surface area and a high-dopant content for an aqueous su-percapacitor with a high energy output still remains a challenge.We report the easy synthesis of interconnected carbon spheres by a polymerization re-action between p-benzaldehyde and 2,6-diaminopyridine.The synthesis in-volves adjusting the mass ratio of the copolymer and KOH activator to achieve increased charge storage ability and high energy output,which are attributed to the high ion-accessible area provided by the large number of micropores,high N/O contents and rapid ion diffusion channels in the porous structure.At a PMEC∶KOH mass ratio of 1∶1,the high electrolyte ion-adsorption area(2599.76 m^(2) g^(−1))and the N/O dopant atoms of the conductive framework of a typical carbon electrode produce a superior specific capacity(303.2 F g^(−1)@0.5 A g^(−1))giving an assembled symmetric capacitor a high energy delivery of 11.3 Wh kg^(−1)@250 W kg^(−1).This study presents a simple strategy for synthesizing microporous carbon and highlights its potential use in KOH-based supercapacitors.展开更多
Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aq...Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.展开更多
Reduction of Cr(VI)using zero-valent iron(ZVI)could not only decrease the amounts of chemicals used for reduction,but also decrease the discharge of sludge.In order to find a desirable ZVI material,reduction of Cr(VI)...Reduction of Cr(VI)using zero-valent iron(ZVI)could not only decrease the amounts of chemicals used for reduction,but also decrease the discharge of sludge.In order to find a desirable ZVI material,reduction of Cr(VI)with a relative high concentration using different kinds of ZVI powders(mainly carbon differences)including reduced Fe,grey cast iron,pig iron,nodular pig iron was carried out.Parameters such as ZVI dosage,type and size affecting on Cr(VI)reduction were firstly examined and grey cast iron was selected as a preferable reducing material,followed by pig iron.Additionally,it was found that the parameters had significant influences on experimental kinetics.Then,morphology and composition of the sample before and after reaction were characterized by SEM,EPMA and XPS analyses to disclose carbon effect on the reducibility.In order to further interpret reaction mechanism,different reaction models were constructed.It was revealed that not only the carbon content could affect the Cr(VI)reduction,but also the carbon structure had an important effect on its reduction.展开更多
Creep tests under at a certain temperature and different stress levels were performed on two carbon constructional quality steels at a certain stress level and different temperatures,and their creep curves at high tem...Creep tests under at a certain temperature and different stress levels were performed on two carbon constructional quality steels at a certain stress level and different temperatures,and their creep curves at high temperature were obtained based on analyzing the testing data.Taking 45 steel at a certain temperature and stress as the example,the integral creep constitutive equation and the differential stress-strain constitutive relationship were established based on the relevant rheological model,and the integral core function was also obtained.Simultaneously,the viscous coefficients denoting the viscous behavior in visco-plastic constitutive equation were determined by taking use of the creep testing data.Then the viscous coefficients of three carbon steels(20 steel,35 steel and 45 steel) were compared and analyzed.The results show that the viscosity is different due to different materials at the same temperature and stress.展开更多
Sodium fulvic acid based hierarchical porous carbons(SFA-HPCs) with a specific surface area of 1919 m^2·g^(–1) and total volume of 1.7 cm^3·g^(–1) has been synthesized by a simple self-template method. The...Sodium fulvic acid based hierarchical porous carbons(SFA-HPCs) with a specific surface area of 1919 m^2·g^(–1) and total volume of 1.7 cm^3·g^(–1) has been synthesized by a simple self-template method. The carbon skeleton can be formatted by the decomposition process of sodium fulvic acid(SFA) in a N_2 atmosphere. The sodium compund in SFA is used as a self-template to create the hierarchical porous structure. The unique hierarchical structure of SFA-HPCs provides an efficient pathway for electrolyte ions to be diffused into the internal surfaces of bulk electrode particles. It results in a high charge storage capacitance of 186 F·g^(–1) at current load of 40 A·g^(–1). The capacitance of 230 F·g^(–1) at 0.05 A·g^(–1) and 186 F·g^(–1) at 40 A·g^(–1) show its good rate capability. Besides, it also achieves desirable cycling stability, 99.4% capacitance remained after 10000 cycles at 40 A·g^(–1).展开更多
Carbon spheres with size of 50-300 nm were synthesized via a solvent-thermal reaction with calcium carbide and chloroform as reactants in a sealed autoclave.The morphologies and microstructures of carbon spheres befor...Carbon spheres with size of 50-300 nm were synthesized via a solvent-thermal reaction with calcium carbide and chloroform as reactants in a sealed autoclave.The morphologies and microstructures of carbon spheres before and after high temperature treatment(HTT) were characterized by X-ray diffractometry(XRD) ,scanning electronic microscopy(SEM) ,energy diffraction spectroscopy(EDS) ,and transmission electron microscopy(TEM) .The formation mechanism of carbon spheres was discussed.The results indicate that the carbon spheres convert to hollow polyhedron through HTT.Carbon spheres are composed of entangled and curve graphitic layers with short range order similar to cotton structure,and carbon polyhedron with dimension of 50-250 nm and shell thickness of 15-30 nm.The change of solid spheres to hollow polyhedron with branches gives a new evidence for formation mechanism of hollow carbon spheres.展开更多
The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential can...The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential candidates based on cosmochemical considerations(Stevenson,1981).High-pressure experiment results,in conjunction with theoretical and cosmochemical evidences,argued that it is difficult for any one of them to account for the core展开更多
基金financially supported by University-level key projects of Anhui University of Science and Technology(QNZD2021-04,QNZD2021-07)Scientific Research Foundation for High-level Talents of Anhui University of Science and Technology(2021yjrc22,13210572)+2 种基金Huainan Science and Technology Bureau Plan Project(2023A3111)Open Research Fund Program of Engineering Technology Research Center of Coal Resources Comprehensive Utilization(MTYJZX202204)Natural Science Research Project of Anhui Educational Committee(2023AH051184,2023AH051210)。
文摘Carbon materials with adjustable porosity,controllable het-eroatom doping and low-cost have been received considerable attention as supercapacitor electrodes.However,using carbon materials with abundant micropores,a high surface area and a high-dopant content for an aqueous su-percapacitor with a high energy output still remains a challenge.We report the easy synthesis of interconnected carbon spheres by a polymerization re-action between p-benzaldehyde and 2,6-diaminopyridine.The synthesis in-volves adjusting the mass ratio of the copolymer and KOH activator to achieve increased charge storage ability and high energy output,which are attributed to the high ion-accessible area provided by the large number of micropores,high N/O contents and rapid ion diffusion channels in the porous structure.At a PMEC∶KOH mass ratio of 1∶1,the high electrolyte ion-adsorption area(2599.76 m^(2) g^(−1))and the N/O dopant atoms of the conductive framework of a typical carbon electrode produce a superior specific capacity(303.2 F g^(−1)@0.5 A g^(−1))giving an assembled symmetric capacitor a high energy delivery of 11.3 Wh kg^(−1)@250 W kg^(−1).This study presents a simple strategy for synthesizing microporous carbon and highlights its potential use in KOH-based supercapacitors.
基金partially supported by the National Natural Science Foundation of China(22479022)Liaoning Revitalization Talents Program(XLYC2007129)。
文摘Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.
基金Project(51604131)supported by the National Natural Science Foundation of ChinaProject(2017FB084)supported by the Yunnan Province Applied Basic Research,China+1 种基金Project(KKSY201563041)supported by the Talent&Training Program of Yunnan Province,ChinaProjects(2017T20090159,2018T20150055)supported by the Testing and Analyzing Funds of Kunming University of Science and Technology,China
文摘Reduction of Cr(VI)using zero-valent iron(ZVI)could not only decrease the amounts of chemicals used for reduction,but also decrease the discharge of sludge.In order to find a desirable ZVI material,reduction of Cr(VI)with a relative high concentration using different kinds of ZVI powders(mainly carbon differences)including reduced Fe,grey cast iron,pig iron,nodular pig iron was carried out.Parameters such as ZVI dosage,type and size affecting on Cr(VI)reduction were firstly examined and grey cast iron was selected as a preferable reducing material,followed by pig iron.Additionally,it was found that the parameters had significant influences on experimental kinetics.Then,morphology and composition of the sample before and after reaction were characterized by SEM,EPMA and XPS analyses to disclose carbon effect on the reducibility.In order to further interpret reaction mechanism,different reaction models were constructed.It was revealed that not only the carbon content could affect the Cr(VI)reduction,but also the carbon structure had an important effect on its reduction.
基金Project(07031B) supported by the Scientific Research Fund of Central South University of Forestry and Technology
文摘Creep tests under at a certain temperature and different stress levels were performed on two carbon constructional quality steels at a certain stress level and different temperatures,and their creep curves at high temperature were obtained based on analyzing the testing data.Taking 45 steel at a certain temperature and stress as the example,the integral creep constitutive equation and the differential stress-strain constitutive relationship were established based on the relevant rheological model,and the integral core function was also obtained.Simultaneously,the viscous coefficients denoting the viscous behavior in visco-plastic constitutive equation were determined by taking use of the creep testing data.Then the viscous coefficients of three carbon steels(20 steel,35 steel and 45 steel) were compared and analyzed.The results show that the viscosity is different due to different materials at the same temperature and stress.
基金supported by the Ningbo’s Industrial Technology Innovation and Industrialization of Scientific and Technological Achievements Program(2013B6003)
文摘Sodium fulvic acid based hierarchical porous carbons(SFA-HPCs) with a specific surface area of 1919 m^2·g^(–1) and total volume of 1.7 cm^3·g^(–1) has been synthesized by a simple self-template method. The carbon skeleton can be formatted by the decomposition process of sodium fulvic acid(SFA) in a N_2 atmosphere. The sodium compund in SFA is used as a self-template to create the hierarchical porous structure. The unique hierarchical structure of SFA-HPCs provides an efficient pathway for electrolyte ions to be diffused into the internal surfaces of bulk electrode particles. It results in a high charge storage capacitance of 186 F·g^(–1) at current load of 40 A·g^(–1). The capacitance of 230 F·g^(–1) at 0.05 A·g^(–1) and 186 F·g^(–1) at 40 A·g^(–1) show its good rate capability. Besides, it also achieves desirable cycling stability, 99.4% capacitance remained after 10000 cycles at 40 A·g^(–1).
基金Project(2006CB600901) supported by the National Basic Research Program of ChinaProject(0991015) supported by Guangxi Natural Science Foundation,ChinaProject(200808MS083) supported by Guangxi Education Department Foundation,China
文摘Carbon spheres with size of 50-300 nm were synthesized via a solvent-thermal reaction with calcium carbide and chloroform as reactants in a sealed autoclave.The morphologies and microstructures of carbon spheres before and after high temperature treatment(HTT) were characterized by X-ray diffractometry(XRD) ,scanning electronic microscopy(SEM) ,energy diffraction spectroscopy(EDS) ,and transmission electron microscopy(TEM) .The formation mechanism of carbon spheres was discussed.The results indicate that the carbon spheres convert to hollow polyhedron through HTT.Carbon spheres are composed of entangled and curve graphitic layers with short range order similar to cotton structure,and carbon polyhedron with dimension of 50-250 nm and shell thickness of 15-30 nm.The change of solid spheres to hollow polyhedron with branches gives a new evidence for formation mechanism of hollow carbon spheres.
文摘The presence of light element(s)in the Earth’s core is necessary in order to explain the observed density and velocity discrepancy for the core(Anderson and Ahrens,1994).O,Si,S,C and H were suggested as potential candidates based on cosmochemical considerations(Stevenson,1981).High-pressure experiment results,in conjunction with theoretical and cosmochemical evidences,argued that it is difficult for any one of them to account for the core
