The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approach...The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approaches are used to explore effective methods to predict dielectric constants of a series of 12 energetic materials(EMs)for which experimental data needed to experimentally determine the dielectric constant(refractive indices)are available.These include military grades energetic materials,nitro and peroxide compounds,and the widely used nitroglycerin.Ab-initio and DFT calculations are conducted.In order to calculate dielectric constant values of materials,potential DFT functional combined with basis sets are considered for testing.Accuracy of the calculations are compared to experimental data listed in the scientific literature,and time required for calculations are both evaluated and discussed.The best functional/basis set combinations among those tested are CAM-B3LYP and AUG-ccpVDZm,which provide great results,with accuracy deviations below 5%when calculated results are compared to experimental data.展开更多
The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size o...The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size of cavity and the dimension of dielectric materials is proposed.And several error correction curves are provided for measuring high dielectric constant materials.Finally,the experiment is conducted to validate the feasibility of our analysis.展开更多
The influence of soaking time on the nonlinear electrical behavior and dielectric properties of TiO2-based varistor ceramics was investigated. Based on single sintering process, six disk samples of （Sr, Bi, Si, Ta）-...The influence of soaking time on the nonlinear electrical behavior and dielectric properties of TiO2-based varistor ceramics was investigated. Based on single sintering process, six disk samples of （Sr, Bi, Si, Ta）-doped TiO2-based varistor ceramics were fabricated by sintering at 1 250 ℃ for 0.5-5.0 h. The samples were characterized by X-ray diffraction, voltage-current characteristics, energy spectra, metallographs, breakdown voltages, and apparent dielectric constant. It is found that the breakdown electrical field intensity at a current density of 10 mA/cma decreases from 5.5 to 4.1 V/mm first and then increases to 7.0 V/mm, the nonlinear coefficient increases from 2.39 to 2.62 first and then decreases to 2.42, and the apparent dielectric constant increases from 98 200 to 1l5 049 first and then decreases to 73 865 with the soaking time increasing from 0.5 to 5.0 h. These indicate that the optimal soaking time is 2.0-3.0 h considering both nonlinear electrical behavior and dielectric properties.展开更多
Preparation and electrocatalytic activities of Pt-TiO_2 nanotubes(Ba_ 0.57Sr_ 0.33Ca_ 0.10)TiO_3 powders,prepared by the sol-gel method,were doped MnCO_3 as acceptor and Dy_2O_3 as donor.This powder was mixed with an ...Preparation and electrocatalytic activities of Pt-TiO_2 nanotubes(Ba_ 0.57Sr_ 0.33Ca_ 0.10)TiO_3 powders,prepared by the sol-gel method,were doped MnCO_3 as acceptor and Dy_2O_3 as donor.This powder was mixed with an organic vehicle and BSCT thick films were fabricated by the screen-printing techniques on alumina substrate.The structural and dielectric properties of BSCT thick films were investigated with variation of Dy_2O_3 amount.As a result of the differential thermal analysis(DTA),exothermic peak was observed at around 670℃ due to the formation of the polycrystalline perovskite phase.All the BSCT thick films showed the XRD patterns of a typical polycrystalline perovskite structure.The average grain size of BSCT thick films decreased with increasing amount of Dy_2O_3.The relative dielectric constant and dielectric loss of the BSCT thick film doped Dy_2O_3 0.1mol% were 4637.4 and 1.6% at 1kHz,respectively.展开更多
Among many scientific objectives of lunar exploration, investigations on lunar soil become more and more attractive to the scientists duo to the existence of abundant 3He and ilmenite in the lunar soil and their possi...Among many scientific objectives of lunar exploration, investigations on lunar soil become more and more attractive to the scientists duo to the existence of abundant 3He and ilmenite in the lunar soil and their possible utilization. Although the soil composition determination on the lunar surface is available by visible light spectrometer,γ/X-ray spectrometer etc, the evaluations on the total reserves of 3He and ilmenite in the lunar deep and on the thickness of the lunar soil are still impossible so far. In this paper, the authors first give a rough analysis of the microwave brightness temperature images of the lunar disc observed using the NRAO 12 Meter Telescope and Siberian Solar Radio Telescope; then introduce our researches on the microwave dielectric properties of lunar soil simulators; finally, discuss some basic relations between the microwave brightness temperature and lunar soil properties.展开更多
文摘The dielectric constant(DC)is one of the key properties for detection of threat materials such as Improvised Explosive Devices(IEDs).In the present paper,the density functional theory(DFT)as well as ab-initio approaches are used to explore effective methods to predict dielectric constants of a series of 12 energetic materials(EMs)for which experimental data needed to experimentally determine the dielectric constant(refractive indices)are available.These include military grades energetic materials,nitro and peroxide compounds,and the widely used nitroglycerin.Ab-initio and DFT calculations are conducted.In order to calculate dielectric constant values of materials,potential DFT functional combined with basis sets are considered for testing.Accuracy of the calculations are compared to experimental data listed in the scientific literature,and time required for calculations are both evaluated and discussed.The best functional/basis set combinations among those tested are CAM-B3LYP and AUG-ccpVDZm,which provide great results,with accuracy deviations below 5%when calculated results are compared to experimental data.
文摘The purpose of this paper is to reduce the error when measuring high dielectric constant materials.In this paper,the reason why the error introduced is analyzed firstly.Then,with HFSS,the method of choosing the size of cavity and the dimension of dielectric materials is proposed.And several error correction curves are provided for measuring high dielectric constant materials.Finally,the experiment is conducted to validate the feasibility of our analysis.
基金Project(50872001) supported by the National Natural Science Foundation of ChinaProjects(KJ2007B132, KJ2009A006Z) supported by the Scientific Research Foundation of Education Department of Anhui Province, ChinaProject(XJ200907) supported by the Foundation of Construction of Quality Project of Anhui University, China
文摘The influence of soaking time on the nonlinear electrical behavior and dielectric properties of TiO2-based varistor ceramics was investigated. Based on single sintering process, six disk samples of （Sr, Bi, Si, Ta）-doped TiO2-based varistor ceramics were fabricated by sintering at 1 250 ℃ for 0.5-5.0 h. The samples were characterized by X-ray diffraction, voltage-current characteristics, energy spectra, metallographs, breakdown voltages, and apparent dielectric constant. It is found that the breakdown electrical field intensity at a current density of 10 mA/cma decreases from 5.5 to 4.1 V/mm first and then increases to 7.0 V/mm, the nonlinear coefficient increases from 2.39 to 2.62 first and then decreases to 2.42, and the apparent dielectric constant increases from 98 200 to 1l5 049 first and then decreases to 73 865 with the soaking time increasing from 0.5 to 5.0 h. These indicate that the optimal soaking time is 2.0-3.0 h considering both nonlinear electrical behavior and dielectric properties.
基金KEI(R-2005-7-094)which is funded by MOCIE(Ministry of commerce,industry and energy)Mr.Parkand Ms.Nohare grateful tothe secondstage of BK21 programfor supporting a fellowship
文摘Preparation and electrocatalytic activities of Pt-TiO_2 nanotubes(Ba_ 0.57Sr_ 0.33Ca_ 0.10)TiO_3 powders,prepared by the sol-gel method,were doped MnCO_3 as acceptor and Dy_2O_3 as donor.This powder was mixed with an organic vehicle and BSCT thick films were fabricated by the screen-printing techniques on alumina substrate.The structural and dielectric properties of BSCT thick films were investigated with variation of Dy_2O_3 amount.As a result of the differential thermal analysis(DTA),exothermic peak was observed at around 670℃ due to the formation of the polycrystalline perovskite phase.All the BSCT thick films showed the XRD patterns of a typical polycrystalline perovskite structure.The average grain size of BSCT thick films decreased with increasing amount of Dy_2O_3.The relative dielectric constant and dielectric loss of the BSCT thick film doped Dy_2O_3 0.1mol% were 4637.4 and 1.6% at 1kHz,respectively.
基金Supported by the China-Russia Joint Research Center on Space Weather,Chinese Academy of Sciences
文摘Among many scientific objectives of lunar exploration, investigations on lunar soil become more and more attractive to the scientists duo to the existence of abundant 3He and ilmenite in the lunar soil and their possible utilization. Although the soil composition determination on the lunar surface is available by visible light spectrometer,γ/X-ray spectrometer etc, the evaluations on the total reserves of 3He and ilmenite in the lunar deep and on the thickness of the lunar soil are still impossible so far. In this paper, the authors first give a rough analysis of the microwave brightness temperature images of the lunar disc observed using the NRAO 12 Meter Telescope and Siberian Solar Radio Telescope; then introduce our researches on the microwave dielectric properties of lunar soil simulators; finally, discuss some basic relations between the microwave brightness temperature and lunar soil properties.
