The effect of laser energy density on the crystallization of hydrogenated intrinsic amorphous silicon （a-Si：H） thin films was studied both theoretically and experimentally. The thin films were irritated by a freque...The effect of laser energy density on the crystallization of hydrogenated intrinsic amorphous silicon （a-Si：H） thin films was studied both theoretically and experimentally. The thin films were irritated by a frequency-doubled （λ= 532 nm） Nd：YAG pulsed nanosecond laser. An effective density functional theory model was built to reveal the variation of bandgap energy influenced by thermal stress after laser irradiation. Experimental results establish correlation between the thermal stress and the shift of transverse optical peak in Raman spectroscopy and suggest that the relatively greater shift of the transverse optical （TO） peak can produce higher stress. The highest crystalline fraction （84.5%） is obtained in the optimized laser energy density （1000 mJ/cm2） with a considerable stress release. The absorption edge energy measured by the UV- visible spectra is in fairly good agreement with the bandgap energy in the density functional theory （DFT） simulation.展开更多
B4C, SiC and C, Cu functionally graded-materials (FGMs) have been developed by plasma spraying and hot pressing. Their high-heat flux properties have been investigated by high energy laser and electron beam for the si...B4C, SiC and C, Cu functionally graded-materials (FGMs) have been developed by plasma spraying and hot pressing. Their high-heat flux properties have been investigated by high energy laser and electron beam for the simulation of plasma disruption process of the future fusion reactors, And a study on eroded products of B4C/Cu FGM under transient thermal load of electron beam was performed. In the experiment, SEM and EDS analysis indicated that B4C and SiC were decomposed, carbon was preferentially evaporated under high thermal load, and a part of Si and Cu were melted, in addition, the splash of melted metal and the particle emission of brittle destruction were also found. Different erosive behaviors of carbon-based materials (CBMs) caused by laser and electron beam were also discussed.展开更多
Memtransistors combine memristors and field-effect transistors, which can introduce multi-port control and have significant applications for enriching storage methods. In this paper, multilayer α-In2Se3and MoS2were t...Memtransistors combine memristors and field-effect transistors, which can introduce multi-port control and have significant applications for enriching storage methods. In this paper, multilayer α-In2Se3and MoS2were transferred to the substrate by the mechanical exfoliation method, then a heterojunction MoS_(2)/α-In_(2)Se_(3) memtransistor was prepared. Neural synaptic simulations were performed using electrical and optical pulses as input signals. Through measurements, such as excitatory/inhibitory post-synaptic current(EPSC/IPSC), long-term potentiation/depression(LTP/LTD), and paired-pulse facilitation/depression(PPF/PPD), it can be found that the fabricated device could simulate various functions of neural synapses well, and could work as an electronic synapse in artificial neural networks, proposing a possible solution for neuromorphic storage and computation.展开更多
基金Project supported by the Shanghai Leading Academic Disciplines,China(Grant No.S30107)
文摘The effect of laser energy density on the crystallization of hydrogenated intrinsic amorphous silicon （a-Si：H） thin films was studied both theoretically and experimentally. The thin films were irritated by a frequency-doubled （λ= 532 nm） Nd：YAG pulsed nanosecond laser. An effective density functional theory model was built to reveal the variation of bandgap energy influenced by thermal stress after laser irradiation. Experimental results establish correlation between the thermal stress and the shift of transverse optical peak in Raman spectroscopy and suggest that the relatively greater shift of the transverse optical （TO） peak can produce higher stress. The highest crystalline fraction （84.5%） is obtained in the optimized laser energy density （1000 mJ/cm2） with a considerable stress release. The absorption edge energy measured by the UV- visible spectra is in fairly good agreement with the bandgap energy in the density functional theory （DFT） simulation.
文摘B4C, SiC and C, Cu functionally graded-materials (FGMs) have been developed by plasma spraying and hot pressing. Their high-heat flux properties have been investigated by high energy laser and electron beam for the simulation of plasma disruption process of the future fusion reactors, And a study on eroded products of B4C/Cu FGM under transient thermal load of electron beam was performed. In the experiment, SEM and EDS analysis indicated that B4C and SiC were decomposed, carbon was preferentially evaporated under high thermal load, and a part of Si and Cu were melted, in addition, the splash of melted metal and the particle emission of brittle destruction were also found. Different erosive behaviors of carbon-based materials (CBMs) caused by laser and electron beam were also discussed.
基金Project supported by the National Natural Science Foundation of China (Grant No. 51702245)。
文摘Memtransistors combine memristors and field-effect transistors, which can introduce multi-port control and have significant applications for enriching storage methods. In this paper, multilayer α-In2Se3and MoS2were transferred to the substrate by the mechanical exfoliation method, then a heterojunction MoS_(2)/α-In_(2)Se_(3) memtransistor was prepared. Neural synaptic simulations were performed using electrical and optical pulses as input signals. Through measurements, such as excitatory/inhibitory post-synaptic current(EPSC/IPSC), long-term potentiation/depression(LTP/LTD), and paired-pulse facilitation/depression(PPF/PPD), it can be found that the fabricated device could simulate various functions of neural synapses well, and could work as an electronic synapse in artificial neural networks, proposing a possible solution for neuromorphic storage and computation.
