According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas...According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas relative permeability and effective viscosity under the condition of miscible flow. In order to predict the production performance（fast,） streamline method is employed to solve this model as an alternative to traditional finite（difference） （methods.） Based on streamline distribution of steady-state flow through porous media with complex boundary confirmed with the boundary element method （BEM）, an explicit total variation diminishing （TVD） method is used to solve the one-dimensional flow problem. At the same time, influences of development scheme, solvent slug size, and injection periods on CO2 drive recovery are discussed. The model has the advantages of less（information） need, fast calculation, and adaptation to calculate CO2 drive performance of all kinds of patterns in a random shaped porous media with assembly boundary. It can be an（effective） tool for early stage screening and reservoir dynamic management of the CO2（miscible） oil field.展开更多
In this paper, novel mathematical expressions are derived for the Global Positioning System (GPS) receiver interference tolerance in the presence of different types of interference signals such as: continuous wave int...In this paper, novel mathematical expressions are derived for the Global Positioning System (GPS) receiver interference tolerance in the presence of different types of interference signals such as: continuous wave interference, narrowband interference, partial band interference, broadband interference, match spectrum interference and pulse interference. Also, in this paper the mean time to loss lock is determined in order to analyse the mentioned interferences effect on the GPS receiver. These derived analytical expressions are validated with the aid of extensive simulation experiments.展开更多
The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be consid...The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be considered have increased significantly, and an efficient gate utilizationhas received considerable attention. For overcoming the shortcomings of previous gate assignmentapproaches, this paper presents a partial parallel gate assignment approach, by which more factorsconcerning aircraft and gates can be collsidered at the same time. This paper also presents themethod of using a knowledge-based system combined with a mathematical programming method forgetting an optimized feasible assignment solution. By this way, it is more easily to get the solutionthat satisfies both the static and dynamic situations,and thus it may adapt well to meet the needsof actual use to rea-time operations. An experimental prototype has been implemented, and a casestudy is presented at the end of the paper.展开更多
Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for ...Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for computing the load was presented. An optimization problem was formulated to determine the attitude of the flexible guidance based on the principle that the potential energy stored in the system was the minimum at the equilibrium. Then the friction force was obtained according to the attitude of guide leaves and the moving velocity of the feed belt and the friction factor. Consequently, the load of the automatic feed mechanism can be calculated. Finally, an example was given to compute the load when the horizontal and elevating firing angles of the automation were respectively 45° and 30°. The computing result can be a criterion to determine the designing parameters of automat.展开更多
Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel...Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel water inrush was proposed based on improved attribute mathematical theory.The trigonometric functions were adopted to optimize the attribute mathematical theory,avoiding the influence of mutation points and linear variation zones in traditional linear measurement functions on the accuracy of the model.Based on comprehensive analysis of various factors,five parameters were selected as the evaluation indicators for the model,including tunnel head pressure,permeability coefficient of surrounding rock,crushing degree of surrounding rock,relative angle of joint plane and tunnel section size,under the principle of dimension rationality,independence,directness and quantification.The indicator classifications were determined.The links among measured data were analyzed in detail,and the objective weight of each indicator was determined by using similar weight method.Thereby the tunnel water inrush risk assessment model is established and applied in four target segments of two different tunnels in engineering.The evaluation results and the actual excavation data agree well,which indicates that the model is of high credibility and feasibility.展开更多
Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for...Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.展开更多
Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination ...Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.展开更多
Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematica...Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.展开更多
Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the...Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.展开更多
In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characte...In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.展开更多
This paper represents a physical model of two -dimensional transpiration cooling control system with surface heating and ablating. The governing equation is derived and the third boundary conditions are given. They co...This paper represents a physical model of two -dimensional transpiration cooling control system with surface heating and ablating. The governing equation is derived and the third boundary conditions are given. They constitute a two -dimensional variable -domain distributed parameter control system in which the control parameter appears in both the governing equation and the boundary conditions. Applying time semi-step alternating direction method to difference this mathematical model, the tridiagonal difference equations are obtained. For a flying shell of electromagnetic railgun, the mathematical simulation results agree with the realistic physical process, and the control parameter not only can control the temperature of heat shield, but also can control the boundary motion effectively.展开更多
According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most import...According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most important is to analyze an influence of the atmospheric electricity on the air and ground, create an exact mathematical model of the physical processes,and describe the ecological influence.展开更多
Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,phot...Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,photo degradation,and chemical coagulation.Dye decolorization with enzymatic reaction is an important issue for several research field(chemistry,environment)In this study,minimum decolorization time of Remazol Brilliant Blue R dye with Horseradish peroxidase enzyme was calculated using with mathematical equation depending on experimental data.Dye decolorization was determined by monitoring the absorbance decrease at the specific maximum wavelength for dye.All experiments were carried out with different initial dye concentrations of Remazol Brilliant Blue R at 25 ℃ constant temperature for 30 minutes.The development of the least squares estimators for a nonlinear model brings about complications not encountered in the case of the linear model.Decolorization times for completely removal of dye were calculated according to equation.It was shown that mathematical equation was conformed exponential curve for dye degradation.展开更多
Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state...Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.展开更多
Visual Query Language on Spatial Information (SIVQL) is one kind of visual query language based on the extension of Query by Example (QBE). It is a visual operation based on graphics or media object, such as point, li...Visual Query Language on Spatial Information (SIVQL) is one kind of visual query language based on the extension of Query by Example (QBE). It is a visual operation based on graphics or media object, such as point, line and area elements. In this paper, the relation calculation and query function of SIVQL have been studied and discussed by using set theory and relation algebra. The theory foundation of SIVQL has been investigated by the mathematical method. Finally, its application examples are also given with the specific information system.展开更多
A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simul...A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.展开更多
Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to p...Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.展开更多
Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated ...Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.展开更多
The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iter...The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iteration algorithm is used to solve this formulation, which distinguishes the integration points of the rigid zones and the plastic zones and solves a series of the quadratic programming to overcome the difficulties caused by the nonsmoothness and the nonlinearity of the objective function. This method has been used to carry out the rigid-plastic FEM analysis. An example is given to demonstrate the effectiveness of this method.展开更多
文摘According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas relative permeability and effective viscosity under the condition of miscible flow. In order to predict the production performance（fast,） streamline method is employed to solve this model as an alternative to traditional finite（difference） （methods.） Based on streamline distribution of steady-state flow through porous media with complex boundary confirmed with the boundary element method （BEM）, an explicit total variation diminishing （TVD） method is used to solve the one-dimensional flow problem. At the same time, influences of development scheme, solvent slug size, and injection periods on CO2 drive recovery are discussed. The model has the advantages of less（information） need, fast calculation, and adaptation to calculate CO2 drive performance of all kinds of patterns in a random shaped porous media with assembly boundary. It can be an（effective） tool for early stage screening and reservoir dynamic management of the CO2（miscible） oil field.
文摘In this paper, novel mathematical expressions are derived for the Global Positioning System (GPS) receiver interference tolerance in the presence of different types of interference signals such as: continuous wave interference, narrowband interference, partial band interference, broadband interference, match spectrum interference and pulse interference. Also, in this paper the mean time to loss lock is determined in order to analyse the mentioned interferences effect on the GPS receiver. These derived analytical expressions are validated with the aid of extensive simulation experiments.
文摘The gate assignment at an airport is one of the major activities in airport operations.With the increase of passenger traffic volumes and the number of flights, the complexity of this task and the factors to be considered have increased significantly, and an efficient gate utilizationhas received considerable attention. For overcoming the shortcomings of previous gate assignmentapproaches, this paper presents a partial parallel gate assignment approach, by which more factorsconcerning aircraft and gates can be collsidered at the same time. This paper also presents themethod of using a knowledge-based system combined with a mathematical programming method forgetting an optimized feasible assignment solution. By this way, it is more easily to get the solutionthat satisfies both the static and dynamic situations,and thus it may adapt well to meet the needsof actual use to rea-time operations. An experimental prototype has been implemented, and a casestudy is presented at the end of the paper.
基金Project supported by the Seventh Research Institute of China State Shipbuilding Corporation
文摘Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for computing the load was presented. An optimization problem was formulated to determine the attitude of the flexible guidance based on the principle that the potential energy stored in the system was the minimum at the equilibrium. Then the friction force was obtained according to the attitude of guide leaves and the moving velocity of the feed belt and the friction factor. Consequently, the load of the automatic feed mechanism can be calculated. Finally, an example was given to compute the load when the horizontal and elevating firing angles of the automation were respectively 45° and 30°. The computing result can be a criterion to determine the designing parameters of automat.
基金Project(2013CB036004) supported by National Basic Research Program(973)of ChinaProject(51378510) supported by National Natural Science Foundation of China
文摘Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel water inrush was proposed based on improved attribute mathematical theory.The trigonometric functions were adopted to optimize the attribute mathematical theory,avoiding the influence of mutation points and linear variation zones in traditional linear measurement functions on the accuracy of the model.Based on comprehensive analysis of various factors,five parameters were selected as the evaluation indicators for the model,including tunnel head pressure,permeability coefficient of surrounding rock,crushing degree of surrounding rock,relative angle of joint plane and tunnel section size,under the principle of dimension rationality,independence,directness and quantification.The indicator classifications were determined.The links among measured data were analyzed in detail,and the objective weight of each indicator was determined by using similar weight method.Thereby the tunnel water inrush risk assessment model is established and applied in four target segments of two different tunnels in engineering.The evaluation results and the actual excavation data agree well,which indicates that the model is of high credibility and feasibility.
基金Project(NCET-05-0630) supported by Program for New Century Excellent Talents in University of China
文摘Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.
文摘Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
基金Project(NCET050630) supported by Program for New Century Excellent Talents in University,China
文摘Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.
文摘Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.
基金Project(7131109)supported by the National Defense Pre-research Foundation of ChinaProject(51175500)supported by the National Natural Science Foundation of China
文摘In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.
基金The project is supported by Natural Science Foundation of China
文摘This paper represents a physical model of two -dimensional transpiration cooling control system with surface heating and ablating. The governing equation is derived and the third boundary conditions are given. They constitute a two -dimensional variable -domain distributed parameter control system in which the control parameter appears in both the governing equation and the boundary conditions. Applying time semi-step alternating direction method to difference this mathematical model, the tridiagonal difference equations are obtained. For a flying shell of electromagnetic railgun, the mathematical simulation results agree with the realistic physical process, and the control parameter not only can control the temperature of heat shield, but also can control the boundary motion effectively.
文摘According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most important is to analyze an influence of the atmospheric electricity on the air and ground, create an exact mathematical model of the physical processes,and describe the ecological influence.
文摘Synthetic dyes are very important for textile dyeing,paper printing,color photography and petroleum products.Traditional methods of dye removal include biodegradation,precipitation,adsorption,chemical degradation,photo degradation,and chemical coagulation.Dye decolorization with enzymatic reaction is an important issue for several research field(chemistry,environment)In this study,minimum decolorization time of Remazol Brilliant Blue R dye with Horseradish peroxidase enzyme was calculated using with mathematical equation depending on experimental data.Dye decolorization was determined by monitoring the absorbance decrease at the specific maximum wavelength for dye.All experiments were carried out with different initial dye concentrations of Remazol Brilliant Blue R at 25 ℃ constant temperature for 30 minutes.The development of the least squares estimators for a nonlinear model brings about complications not encountered in the case of the linear model.Decolorization times for completely removal of dye were calculated according to equation.It was shown that mathematical equation was conformed exponential curve for dye degradation.
基金This project was supported by the National Key program of Science and Technology(99-A29-0101).
文摘Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.
文摘Visual Query Language on Spatial Information (SIVQL) is one kind of visual query language based on the extension of Query by Example (QBE). It is a visual operation based on graphics or media object, such as point, line and area elements. In this paper, the relation calculation and query function of SIVQL have been studied and discussed by using set theory and relation algebra. The theory foundation of SIVQL has been investigated by the mathematical method. Finally, its application examples are also given with the specific information system.
文摘A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.
文摘Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.
文摘Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.
文摘The rigid-plastic analysis of mental forming simulation is formulated as a discrete nonlinear mathematical programming problem with equality and inequality constraints by means of the finite element technique. An iteration algorithm is used to solve this formulation, which distinguishes the integration points of the rigid zones and the plastic zones and solves a series of the quadratic programming to overcome the difficulties caused by the nonsmoothness and the nonlinearity of the objective function. This method has been used to carry out the rigid-plastic FEM analysis. An example is given to demonstrate the effectiveness of this method.
