Fiber reinforced polymers (FRPs), unlike steel, are corrosion-resistant and therefore are of interest;however, their use is hindered because their brittle shear is formulated in most specifications using limited data ...Fiber reinforced polymers (FRPs), unlike steel, are corrosion-resistant and therefore are of interest;however, their use is hindered because their brittle shear is formulated in most specifications using limited data available at the time. We aimed to predict the shear strength of concrete beams reinforced with FRP bars and without stirrups by compiling a relatively large database of 198 previously published test results (available in appendix). To model shear strength, an artificial neural network was trained by an ensemble of Levenberg-Marquardt and imperialist competitive algorithms. The results suggested superior accuracy of model compared to equations available in specifications and literature.展开更多
A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A fi...A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A finite element analysis(FEA) was performed for preliminarily evaluating the suitability of the proposed conceptual double pull specimen.Through the FEA,it was indicated that the FRP-to-concrete interface of the proposed conceptual specimen might subject to a much higher load level than that of the most commonly used simple shear specimen,showing a great potential for measuring δ-τ relationship more accurately.In the light of the conceptual specimen,a kind of "practical" double pull specimen was developed and proved to be more suitable for measuring δ-τ relationship through an exploratory experimental study with 20 specimens.Consequently,an experimental program with 10 double pull specimens was performed for measuring the ultimate slip δu which was difficult to capture by using the existing specimens.It is shown that the range of δu is 0.31-0.52 mm based on the test results.The suggestion for improving the measure method is also put forward.展开更多
The full-range behavior of partially bonded, together with partially prestressed concrete beams containing fiber reinforced polymer （FRP） tendons and stainless steel reinforcing bars was simulated using a simplified...The full-range behavior of partially bonded, together with partially prestressed concrete beams containing fiber reinforced polymer （FRP） tendons and stainless steel reinforcing bars was simulated using a simplified theoretical model. The model assumes that a section in the beam has a trilinear moment--curvature relationship characterized by three particular points, initial cracking of concrete, yielding of non-prestressed steel, and crushing of concrete or rupturing of prestressing tendons. Predictions from the model were compared with the limited available test data, and a reasonable agreement was obtained. A detailed parametric study of the behavior of the prestressed concrete beams with hybrid FRP and stainless steel reinforcements was conducted. It can be concluded that the deformability of the beam can be enhanced by increasing the ultimate compressive strain of concrete, unhonded length of tendon, percentage of compressive reinforcement and partial prestress ratio, and decreasing the effective prestress in tendons, and increasing in ultimate compressive strain of concrete is the most efficient one. The deformability of the beam is almost directly proportional to the concrete ultimate strain provided the failure mode is concrete crushing, even though the concrete ultimate strain has less influence on the load-carrying capacity.展开更多
文摘Fiber reinforced polymers (FRPs), unlike steel, are corrosion-resistant and therefore are of interest;however, their use is hindered because their brittle shear is formulated in most specifications using limited data available at the time. We aimed to predict the shear strength of concrete beams reinforced with FRP bars and without stirrups by compiling a relatively large database of 198 previously published test results (available in appendix). To model shear strength, an artificial neural network was trained by an ensemble of Levenberg-Marquardt and imperialist competitive algorithms. The results suggested superior accuracy of model compared to equations available in specifications and literature.
基金Project(2006BAJ03A07) supported by the National Key Technologies R & D Program of ChinaProject(5008283) supported by the Natural Science Foundation of Guangdong Province, China
文摘A new "conceptual" design named "double pull" specimen was proposed in order to measure the bond-slip(δ-τ) relationship of fiber reinforced polymer(FRP)-to-concrete interface more accurately.A finite element analysis(FEA) was performed for preliminarily evaluating the suitability of the proposed conceptual double pull specimen.Through the FEA,it was indicated that the FRP-to-concrete interface of the proposed conceptual specimen might subject to a much higher load level than that of the most commonly used simple shear specimen,showing a great potential for measuring δ-τ relationship more accurately.In the light of the conceptual specimen,a kind of "practical" double pull specimen was developed and proved to be more suitable for measuring δ-τ relationship through an exploratory experimental study with 20 specimens.Consequently,an experimental program with 10 double pull specimens was performed for measuring the ultimate slip δu which was difficult to capture by using the existing specimens.It is shown that the range of δu is 0.31-0.52 mm based on the test results.The suggestion for improving the measure method is also put forward.
基金Project (50478502) supported by the National Natural Science Foundation of China
文摘The full-range behavior of partially bonded, together with partially prestressed concrete beams containing fiber reinforced polymer （FRP） tendons and stainless steel reinforcing bars was simulated using a simplified theoretical model. The model assumes that a section in the beam has a trilinear moment--curvature relationship characterized by three particular points, initial cracking of concrete, yielding of non-prestressed steel, and crushing of concrete or rupturing of prestressing tendons. Predictions from the model were compared with the limited available test data, and a reasonable agreement was obtained. A detailed parametric study of the behavior of the prestressed concrete beams with hybrid FRP and stainless steel reinforcements was conducted. It can be concluded that the deformability of the beam can be enhanced by increasing the ultimate compressive strain of concrete, unhonded length of tendon, percentage of compressive reinforcement and partial prestress ratio, and decreasing the effective prestress in tendons, and increasing in ultimate compressive strain of concrete is the most efficient one. The deformability of the beam is almost directly proportional to the concrete ultimate strain provided the failure mode is concrete crushing, even though the concrete ultimate strain has less influence on the load-carrying capacity.
