The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytic...The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytical study of the evolution of the nose shape of larger hollow projectiles under hypersonic penetration.In the hypersonic penetration test,eight ogive-nose AerMet100 steel projectiles with a diameter of 40 mm were launched to hit concrete targets with impact velocities that ranged from 1351 to 1877 m/s.Severe erosion of the projectiles was observed during high-speed penetration of heterogeneous targets,and apparent localized mushrooming occurred in the front nose of recovered projectiles.By examining the damage to projectiles,a linear relationship was found between the relative length reduction rate and the initial kinetic energy of projectiles in different penetration tests.Furthermore,microscopic analysis revealed the forming mechanism of the localized mushrooming phenomenon for eroding penetration,i.e.,material spall erosion abrasion mechanism,material flow and redistribution abrasion mechanism and localized radial upsetting deformation mechanism.Finally,a model of highspeed penetration that included erosion was established on the basis of a model of the evolution of the projectile nose that considers radial upsetting;the model was validated by test data from the literature and the present study.Depending upon the impact velocity,v0,the projectile nose may behave as undistorted,radially distorted or hemispherical.Due to the effects of abrasion of the projectile and enhancement of radial upsetting on the duration and amplitude of the secondary rising segment in the pulse shape of projectile deceleration,the predicted DOP had an upper limit.展开更多
The test selection and optimization （TSO） can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management （PHM） systems. Traditionally, TSO mainly focuse...The test selection and optimization （TSO） can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management （PHM） systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability （DFT） to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model （FEMM） for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm （ASAGA） is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level.展开更多
Utilizing the acoustic emission(AE) technique, an experimental investigation into the damage evolution for steel strand under axial tension was described. The damage evolution model for steel stand relating the damage...Utilizing the acoustic emission(AE) technique, an experimental investigation into the damage evolution for steel strand under axial tension was described. The damage evolution model for steel stand relating the damage evolution to acoustic emission parameters was proposed by incorporating the AE rate process theory. The AE monitoring results indicate that damages occur in both elastic and plastic phases of steel strand. In elastic phase, AE signals are mainly sent out from the micro damage due to the surface friction among the wires of steel strand, while in plastic phase, AE signals emitted from the plastic deformation of wires. In addition, the AE cumulative parameters curves closely resemble the loading curve. The AE cumulative parameters curves can well describe the damage evolution process including the damage occurrence and damage development for steel strands. It is concluded that the AE technique is an effective and useful nondestructive technique for evaluating the damage characteristics of steel strand.展开更多
Resistance genes enable plants to fight against plant pathogens. Plant resistance genes （R gene） are organized complexly in genome. Some resistance gene sequence data enable an insight into R gene structure and gene...Resistance genes enable plants to fight against plant pathogens. Plant resistance genes （R gene） are organized complexly in genome. Some resistance gene sequence data enable an insight into R gene structure and gene evolution. Some sites like Leucine-Rich Repeat （LRR） are of specific interest since homologous recombination can happen. Crossing over, transposon insertion and excision and mutation can produce new specificity. Three models explaining R gene evolution were discussed. More information needed for dissection of R gene evolution though some step can be inferred from genetic and sequence analysis.展开更多
Rockburst is a dynamic phenomenon accompanied by acoustic emission(AE)activities.It is difficult to predict rockburst accurately.Based on the fast Fourier transform(FFT)method and the information entropy theory,the ev...Rockburst is a dynamic phenomenon accompanied by acoustic emission(AE)activities.It is difficult to predict rockburst accurately.Based on the fast Fourier transform(FFT)method and the information entropy theory,the evolution model of dominant frequency entropy was established.The AE energy,frequency and stress were synthetically considered to predict rockburst.Under the triaxial and the single-face unloading tests,the relationship between AE energy and the development of internal cracks was analyzed.Using the FFT method,the distribution characteristics of AE dominant frequency values were obtained.Based on the information entropy theory,the dominant frequencies evolved patterns were ascertained.It was observed that the evolution models of the dominant frequency entropy were nearly the same and shared a characteristic“undulation-decrease-rise-sharp decrease”pattern.Results show that AE energy will be released suddenly before rockburst.The density of intermediate frequency increased prior to rockburst.The dominant frequency entropy reached a relative maximum value before rockburst,and then decreased sharply.These features could be used as a precursory information for predicting rockburst.The proposed relative maximum value could be as a key point to predict rockburst.This is a meaningful attempt on predicting rockburst.展开更多
基金the National Natural Science Foundation of China(Grant No.12102050)the Open Fund of State Key Laboratory of Explosion Science and Technology(Grant No.SKLEST-ZZ-21-18).
文摘The majority of the projectiles used in the hypersonic penetration study are solid flat-nosed cylindrical projectiles with a diameter of less than 20 mm.This study aims to fill the gap in the experimental and analytical study of the evolution of the nose shape of larger hollow projectiles under hypersonic penetration.In the hypersonic penetration test,eight ogive-nose AerMet100 steel projectiles with a diameter of 40 mm were launched to hit concrete targets with impact velocities that ranged from 1351 to 1877 m/s.Severe erosion of the projectiles was observed during high-speed penetration of heterogeneous targets,and apparent localized mushrooming occurred in the front nose of recovered projectiles.By examining the damage to projectiles,a linear relationship was found between the relative length reduction rate and the initial kinetic energy of projectiles in different penetration tests.Furthermore,microscopic analysis revealed the forming mechanism of the localized mushrooming phenomenon for eroding penetration,i.e.,material spall erosion abrasion mechanism,material flow and redistribution abrasion mechanism and localized radial upsetting deformation mechanism.Finally,a model of highspeed penetration that included erosion was established on the basis of a model of the evolution of the projectile nose that considers radial upsetting;the model was validated by test data from the literature and the present study.Depending upon the impact velocity,v0,the projectile nose may behave as undistorted,radially distorted or hemispherical.Due to the effects of abrasion of the projectile and enhancement of radial upsetting on the duration and amplitude of the secondary rising segment in the pulse shape of projectile deceleration,the predicted DOP had an upper limit.
基金supported by the National Natural Science Foundation of China(51175502)
文摘The test selection and optimization （TSO） can improve the abilities of fault diagnosis, prognosis and health-state evalua- tion for prognostics and health management （PHM） systems. Traditionally, TSO mainly focuses on fault detection and isolation, but they cannot provide an effective guide for the design for testability （DFT） to improve the PHM performance level. To solve the problem, a model of TSO for PHM systems is proposed. Firstly, through integrating the characteristics of fault severity and propa- gation time, and analyzing the test timing and sensitivity, a testability model based on failure evolution mechanism model （FEMM） for PHM systems is built up. This model describes the fault evolution- test dependency using the fault-symptom parameter matrix and symptom parameter-test matrix. Secondly, a novel method of in- herent testability analysis for PHM systems is developed based on the above information. Having completed the analysis, a TSO model, whose objective is to maximize fault trackability and mini- mize the test cost, is proposed through inherent testability analysis results, and an adaptive simulated annealing genetic algorithm （ASAGA） is introduced to solve the TSO problem. Finally, a case of a centrifugal pump system is used to verify the feasibility and effectiveness of the proposed models and methods. The results show that the proposed technology is important for PHM systems to select and optimize the test set in order to improve their performance level.
基金Projects(51308073,51378081)supported by the National Natural Science Foundation of ChinaProject(20124316120002)supported by PhD Programs Foundation of Ministry of Education of China+1 种基金Project(12KB02)supported by the Key Laboratory for Safety Control of Bridge Engineering of Ministry of Education of ChinaProject(14JJ3087)supported by the Science Foundation of Hunan Province,China
文摘Utilizing the acoustic emission(AE) technique, an experimental investigation into the damage evolution for steel strand under axial tension was described. The damage evolution model for steel stand relating the damage evolution to acoustic emission parameters was proposed by incorporating the AE rate process theory. The AE monitoring results indicate that damages occur in both elastic and plastic phases of steel strand. In elastic phase, AE signals are mainly sent out from the micro damage due to the surface friction among the wires of steel strand, while in plastic phase, AE signals emitted from the plastic deformation of wires. In addition, the AE cumulative parameters curves closely resemble the loading curve. The AE cumulative parameters curves can well describe the damage evolution process including the damage occurrence and damage development for steel strands. It is concluded that the AE technique is an effective and useful nondestructive technique for evaluating the damage characteristics of steel strand.
文摘Resistance genes enable plants to fight against plant pathogens. Plant resistance genes （R gene） are organized complexly in genome. Some resistance gene sequence data enable an insight into R gene structure and gene evolution. Some sites like Leucine-Rich Repeat （LRR） are of specific interest since homologous recombination can happen. Crossing over, transposon insertion and excision and mutation can produce new specificity. Three models explaining R gene evolution were discussed. More information needed for dissection of R gene evolution though some step can be inferred from genetic and sequence analysis.
基金Project(2017YFC0804201)supported by the National Key Research and Development Program of ChinaProject(51574246)supported by the National Natural Science Foundation of China+1 种基金Project(2011QZ01)supported by Fundamental Research Funds for the Central Universities,ChinaProject(C201911362)supported by the National Training Program of Innovation and Entrepreneurship for Undergraduates,China。
文摘Rockburst is a dynamic phenomenon accompanied by acoustic emission(AE)activities.It is difficult to predict rockburst accurately.Based on the fast Fourier transform(FFT)method and the information entropy theory,the evolution model of dominant frequency entropy was established.The AE energy,frequency and stress were synthetically considered to predict rockburst.Under the triaxial and the single-face unloading tests,the relationship between AE energy and the development of internal cracks was analyzed.Using the FFT method,the distribution characteristics of AE dominant frequency values were obtained.Based on the information entropy theory,the dominant frequencies evolved patterns were ascertained.It was observed that the evolution models of the dominant frequency entropy were nearly the same and shared a characteristic“undulation-decrease-rise-sharp decrease”pattern.Results show that AE energy will be released suddenly before rockburst.The density of intermediate frequency increased prior to rockburst.The dominant frequency entropy reached a relative maximum value before rockburst,and then decreased sharply.These features could be used as a precursory information for predicting rockburst.The proposed relative maximum value could be as a key point to predict rockburst.This is a meaningful attempt on predicting rockburst.
