The afterburning of TNT and structural constraints in confined spaces significantly amplify the blast load,leading to severe structural damage. This study investigates the mechanisms underlying the enhanced dynamic re...The afterburning of TNT and structural constraints in confined spaces significantly amplify the blast load,leading to severe structural damage. This study investigates the mechanisms underlying the enhanced dynamic response of reinforced concrete blast doors with four-sided restraints in confined space. Explosion tests with TNT charges ranging from 0.15 kg to 0.4 kg were conducted in a confined space,capturing overpressure loads and the dynamic response of the blast door. An internal explosion model incorporating the afterburning effect was developed using LS-DYNA software and validated against experimental data. The results reveal that the TNT afterburning effect amplifies both the initial peak overpressure and the quasi-static overpressure, resulting in increased deformation of the blast door.Within the 0.15-0.4 kg charge range, the initial overpressure peak and quasi-static overpressure increased by an average of 1.79 times and 2.21 times, respectively. Additionally, the afterburning effect enhanced the blast door's deflection by 177%. Compared to open-space scenarios, the cumulative deflection of the blast door due to repeated shock wave impacts is significantly greater in confined spaces. Furthermore, the quasi-static pressure arising from the structural constraints sustains the blast door's deflection at a high level.展开更多
Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/Al/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel t...Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/Al/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.展开更多
When a penetrator with enhanced lateral effect(PELE) impacts on a reinforced concrete(RC) target,the target is damaged with a large opening.An understanding of how PELE projectile parameters affect the opening dimensi...When a penetrator with enhanced lateral effect(PELE) impacts on a reinforced concrete(RC) target,the target is damaged with a large opening.An understanding of how PELE projectile parameters affect the opening dimension,is essential for effective design of the PELE projectile.In this study,under the condition that the impact velocity and target parameters(strength and thickness) were fixed values,the important influence factors of the PELE(jacket wall thickness B,jacket material strength Y1,filling material strength Y2 and angle of monolithic jacket θ) were determined by a dimensional analysis.Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter(D,an equivalent diameter under relative kinetic energy).Based on the test and simulation results,it is found that the influence of these factors B,Y1 and θ on the deformation mode of the jacket shows a similar trend:as values of the three factors decrease,the jacket deforms from small bending deformation to large one,and then to curling deformation.This causes the opening diameter to first increase with the decrease of these three factors,and then decreases.It is well known that the bending resistance of the jacket is related to these factors B,Y1 and θ.Therefore,a plastic limit bending moment(M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target.The influence factor Y2 causes D to first increase with the increase of Y2,and then decreases.A formula was developed to predict the opening diameter,whose influence parameters were considered in a dimensionless way.It has been shown that the dimensionless opening diameter D/d1 is dependent on two dimensionless parameters■ and■,where d1 and fc are the outer diameter of the projectile and the compressive strength of the target,respectively.展开更多
Impact experiments of large-caliber PELE with various inner-outer diameter ratio perforating RHA plate at low velocity were performed.Experimental results showed the size of perforated holes on plate,average diameter ...Impact experiments of large-caliber PELE with various inner-outer diameter ratio perforating RHA plate at low velocity were performed.Experimental results showed the size of perforated holes on plate,average diameter of damage area on witness plate,and number of behind-armor fragments will increase as d/D increasing from 0.72 to 0.84.Expansion and fragmentation of large-caliber PELE in this condition were also numerically studied with ANSYS Autodyn.Then,an analytical model accounting for an additional radial shock wave was presented to predict radial expansion velocity and fragmentation of jacket,as well as an empirical approach to estimate diameter of damage area.Calculation results by these approaches were in good agreement with experiments and numerical simulations.Further discussion revealed that Shock/rarefaction wave interactions behavior varying with inner-outer diameter ratio is an important mechanism resulting in different lateral effect by PELE projectiles with various configurations.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No. 52278504)the Natural Science Foundation of Jiangsu Province (Grant No. BK20220141)。
文摘The afterburning of TNT and structural constraints in confined spaces significantly amplify the blast load,leading to severe structural damage. This study investigates the mechanisms underlying the enhanced dynamic response of reinforced concrete blast doors with four-sided restraints in confined space. Explosion tests with TNT charges ranging from 0.15 kg to 0.4 kg were conducted in a confined space,capturing overpressure loads and the dynamic response of the blast door. An internal explosion model incorporating the afterburning effect was developed using LS-DYNA software and validated against experimental data. The results reveal that the TNT afterburning effect amplifies both the initial peak overpressure and the quasi-static overpressure, resulting in increased deformation of the blast door.Within the 0.15-0.4 kg charge range, the initial overpressure peak and quasi-static overpressure increased by an average of 1.79 times and 2.21 times, respectively. Additionally, the afterburning effect enhanced the blast door's deflection by 177%. Compared to open-space scenarios, the cumulative deflection of the blast door due to repeated shock wave impacts is significantly greater in confined spaces. Furthermore, the quasi-static pressure arising from the structural constraints sustains the blast door's deflection at a high level.
文摘Enhanced damage to the full-filled fuel tank,impacted by the cold pressed and sintered PTFE/Al/W reactive material projectile(RMP)with a density of 7.8 g/cm3,is investigated experimentally and theoretically.The fuel tank is a rectangular structure,welded by six pieces of 2024 aluminum plate with a thickness of 6 mm,and filled with RP-3 aviation kerosene.Experimental results show that the kerosene is ignited by the RMP impact at a velocity above 1062 m/s,and a novel interior ignition phenomenon which is closely related to the rupture effect of the fuel tank is observed.However,the traditional steel projectile with the same mass and dimension requires a velocity up to 1649 m/s to ignite the kerosene.Based on the experimental results,the radial pressure field is considered to be the main reason for the shear failure of weld.For mechanism considerations,the chemical energy released by the RMP enhances the hydrodynamic ram(HRAM)effect and provides additional ignition sources inside the fuel tank,thereby enhancing both rupture and ignition effects.Moreover,to further understand the enhanced ignition effect of RMP,the reactive debris temperature inside the kerosene is analyzed theoretically.The initiated reactive debris with high temperature provides effective interior ignition sources to ignite the kerosene,resulting in the enhanced ignition of the kerosene.
基金supported by the National Natural Science Foundation of China (Grant No: 11472008, 11772160, 11802141)the Opening Project of State Key Laboratory of Explosion Science and Technology (KFJJ18-01M), Beijing Institute of Technology。
文摘When a penetrator with enhanced lateral effect(PELE) impacts on a reinforced concrete(RC) target,the target is damaged with a large opening.An understanding of how PELE projectile parameters affect the opening dimension,is essential for effective design of the PELE projectile.In this study,under the condition that the impact velocity and target parameters(strength and thickness) were fixed values,the important influence factors of the PELE(jacket wall thickness B,jacket material strength Y1,filling material strength Y2 and angle of monolithic jacket θ) were determined by a dimensional analysis.Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter(D,an equivalent diameter under relative kinetic energy).Based on the test and simulation results,it is found that the influence of these factors B,Y1 and θ on the deformation mode of the jacket shows a similar trend:as values of the three factors decrease,the jacket deforms from small bending deformation to large one,and then to curling deformation.This causes the opening diameter to first increase with the decrease of these three factors,and then decreases.It is well known that the bending resistance of the jacket is related to these factors B,Y1 and θ.Therefore,a plastic limit bending moment(M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target.The influence factor Y2 causes D to first increase with the increase of Y2,and then decreases.A formula was developed to predict the opening diameter,whose influence parameters were considered in a dimensionless way.It has been shown that the dimensionless opening diameter D/d1 is dependent on two dimensionless parameters■ and■,where d1 and fc are the outer diameter of the projectile and the compressive strength of the target,respectively.
文摘Impact experiments of large-caliber PELE with various inner-outer diameter ratio perforating RHA plate at low velocity were performed.Experimental results showed the size of perforated holes on plate,average diameter of damage area on witness plate,and number of behind-armor fragments will increase as d/D increasing from 0.72 to 0.84.Expansion and fragmentation of large-caliber PELE in this condition were also numerically studied with ANSYS Autodyn.Then,an analytical model accounting for an additional radial shock wave was presented to predict radial expansion velocity and fragmentation of jacket,as well as an empirical approach to estimate diameter of damage area.Calculation results by these approaches were in good agreement with experiments and numerical simulations.Further discussion revealed that Shock/rarefaction wave interactions behavior varying with inner-outer diameter ratio is an important mechanism resulting in different lateral effect by PELE projectiles with various configurations.
