The depth of penetration(DOP)method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials.The ceramic tile is bonded to a backing material of semi-infinite thickness,and th...The depth of penetration(DOP)method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials.The ceramic tile is bonded to a backing material of semi-infinite thickness,and the penetration depth of the projectile gives a measure of the performance of the ceramic.There is,however,an inherent variability in the results from this test method.In this work,the accuracy and the variability of the DOP method has been investigated in a round robin exercise.Six ballistic test centres took part in the exercise.A test protocol was developed,in which the threat type(projectile and impact conditions)and a procedure on how to prepare the targets were specified.The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes.Two different 7.62 mm armour piercing projectiles were employed;one with a hard steel core and one with a tungsten carbide core.The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties.These materials were distributed between the ballistic test centres.The test results of the different ballistic test facilities were collected and compared.There was not a lot of variation between the average DOP values obtained at each laboratory,but the variation in penetration depth between shots was high.The consequence of this variation may be less confidence in the test results,and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence.In most cases,the required number of tests is much higher than what is practically feasible.This work was conducted as part of the European Defence Agency-project CERAMBALL.展开更多
To study the relationship between grouting effect and grouting factors, three factors （seven parameters） directionless pressure and small cycle grouting model experiment on sandy gravel was done, which was designed ...To study the relationship between grouting effect and grouting factors, three factors （seven parameters） directionless pressure and small cycle grouting model experiment on sandy gravel was done, which was designed according to uniform design method. And regressing was applied to analysis of the test data. The two models test results indicate that when the diffusing radius of grout changes from 26 to 51 cm, the grouted sandy gravel compressing strength changes from 2.13 to 12.30 MPa; the relationship between diffusing radius（R） and water cement ratio（m）, permeability coefficient（k）, grouting pressure（p）, grouting time（t） is R=19.953m^0.121k^0.429p^0.412t^0.437; the relationship between compressing strength（P） and porosity（n）, water cement ratio, grouting pressure, grouting time is P =0.984n^0.517m6-1.488p^0.118t^0.031. So the porosity of sandy gravel, the permeability coefficient of sandy gravel, grouting pressure, grouting time, water cement ratio are main factors to influence the grouting effect. The grouting pressure is the main factor to influence grouting diffusing radius, and the water cement ratio is the main factor to influence grouted sandy gravel compressing strength.展开更多
In order to accurately estimate the anti-penetration capacity of yaw-inducing bursting layer with irregular barriers on surface impacted by projectile,the theoretical model of attack angle and angular velocity for pro...In order to accurately estimate the anti-penetration capacity of yaw-inducing bursting layer with irregular barriers on surface impacted by projectile,the theoretical model of attack angle and angular velocity for projectile impacting on irregular barrier was achieved according to the macroscopic relation of contact force versus contact time,in which the main factors such as the relative geometrical characteristics of projectile and irregular barrier,material property and impact velocity of projectile influencing on yaw-inducing effectiveness were considered.On the basis of considering synthetically the influences of attack angle,impact velocity,impact angle of projectile and uncontrolled free surface of target,the theoretical formulation of penetration depth for bursting layer with irregular barriers on surface impacted by projectile was presented by expressing the stress of an optional point on the nose of projectile according to the relation of stress versus velocity.The theoretical results indicate that in the case of oblique impact embodying effect of attack angle,the penetration depth is reduced with the increase of impact angle,attack angle or angular velocity,and penetration trajectory is also deflected obviously.The effectiveness of angular velocity influencing on penetration depth is increased with impact velocity increasing.The theoretical results are in good agreement with test data for low impact velocity.展开更多
The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of c...The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.展开更多
An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different fr...An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different from element-based numerical methods, this approach makes nodes free from the elemental restraint and avoids the explicit mesh discretization. First, we derived the boundary value problem for the 2D GPR simulation problems. Second, a penalty function approach and a boundary condition truncated method were used to enforce the essential and the absorbing boundary conditions, respectively. A three-layered GPR model was used to verify our element-free approach. The numerical solutions show that our solutions have an excellent agreement with solutions of a finite element method(FEM). Then, we used the EFGM to simulate one more complex model to show its capability and limitations. Simulation results show that one obvious advantage of EFGM is the absence of element mesh, which makes the method very flexible. Due to the use of MLS fitting, a key feature of EFM, is that both the dependent variable and its gradient are continuous and have high precision.展开更多
基金conducted as part of the European Defence Agency-project CERAMBALL,contract number B 1091 GEM1 GP
文摘The depth of penetration(DOP)method is a well-known ballistic test method for characterisation and ranking of ceramic armour materials.The ceramic tile is bonded to a backing material of semi-infinite thickness,and the penetration depth of the projectile gives a measure of the performance of the ceramic.There is,however,an inherent variability in the results from this test method.In this work,the accuracy and the variability of the DOP method has been investigated in a round robin exercise.Six ballistic test centres took part in the exercise.A test protocol was developed,in which the threat type(projectile and impact conditions)and a procedure on how to prepare the targets were specified.The targets consisted of alumina tiles of two different thicknesses that were bonded to polycarbonate backing cubes.Two different 7.62 mm armour piercing projectiles were employed;one with a hard steel core and one with a tungsten carbide core.The projectiles and the other materials all came from single material batches in order to avoid batch-to-batch variations in material properties.These materials were distributed between the ballistic test centres.The test results of the different ballistic test facilities were collected and compared.There was not a lot of variation between the average DOP values obtained at each laboratory,but the variation in penetration depth between shots was high.The consequence of this variation may be less confidence in the test results,and a statistical method was used to evaluate the required number of tests that are sufficient to obtain an average result with high confidence.In most cases,the required number of tests is much higher than what is practically feasible.This work was conducted as part of the European Defence Agency-project CERAMBALL.
基金Foundation item: Project(40372124) supported by the National Natural Science of China project(05R214145) supported by Postdoctor Research Foundation of Chinaproject(B308) supported by Shanghai Leading Academic Discipline
文摘To study the relationship between grouting effect and grouting factors, three factors （seven parameters） directionless pressure and small cycle grouting model experiment on sandy gravel was done, which was designed according to uniform design method. And regressing was applied to analysis of the test data. The two models test results indicate that when the diffusing radius of grout changes from 26 to 51 cm, the grouted sandy gravel compressing strength changes from 2.13 to 12.30 MPa; the relationship between diffusing radius（R） and water cement ratio（m）, permeability coefficient（k）, grouting pressure（p）, grouting time（t） is R=19.953m^0.121k^0.429p^0.412t^0.437; the relationship between compressing strength（P） and porosity（n）, water cement ratio, grouting pressure, grouting time is P =0.984n^0.517m6-1.488p^0.118t^0.031. So the porosity of sandy gravel, the permeability coefficient of sandy gravel, grouting pressure, grouting time, water cement ratio are main factors to influence the grouting effect. The grouting pressure is the main factor to influence grouting diffusing radius, and the water cement ratio is the main factor to influence grouted sandy gravel compressing strength.
基金Project(20110490894) supported by the Postdoctoral Science Foundation of ChinaProject(50908228) supported by the National Natural Science Foundation of ChinaProject(51021001) supported by the Science Foundation for Creative Research Groups of China
文摘In order to accurately estimate the anti-penetration capacity of yaw-inducing bursting layer with irregular barriers on surface impacted by projectile,the theoretical model of attack angle and angular velocity for projectile impacting on irregular barrier was achieved according to the macroscopic relation of contact force versus contact time,in which the main factors such as the relative geometrical characteristics of projectile and irregular barrier,material property and impact velocity of projectile influencing on yaw-inducing effectiveness were considered.On the basis of considering synthetically the influences of attack angle,impact velocity,impact angle of projectile and uncontrolled free surface of target,the theoretical formulation of penetration depth for bursting layer with irregular barriers on surface impacted by projectile was presented by expressing the stress of an optional point on the nose of projectile according to the relation of stress versus velocity.The theoretical results indicate that in the case of oblique impact embodying effect of attack angle,the penetration depth is reduced with the increase of impact angle,attack angle or angular velocity,and penetration trajectory is also deflected obviously.The effectiveness of angular velocity influencing on penetration depth is increased with impact velocity increasing.The theoretical results are in good agreement with test data for low impact velocity.
文摘The ground penetrating radar(GPR) forward simulation all aims at the singular and regular models, such as sandwich model, round cavity, square cavity, and so on, which are comparably simple. But as to the forward of curl interface underground or “v” figure complex model, it is difficult to realize. So it is important to forward the complex geoelectricity model. This paper takes two Maxwell’s vorticity equations as departure point, makes use of the principles of Yee’s space grid model theory and the basic principle finite difference time domain method, and deduces a GPR forward system of equation of two dimensional spaces. The Mur super absorbed boundary condition is adopted to solve the super strong reflection on the interceptive boundary when there is the forward simulation. And a self-made program is used to process forward simulation to two typical geoelectricity model.
基金Project(41074085)supported by the National Natural Science Foundation of ChinaProject(NCET-12-0551)supported by the Funds for New Century Excellent Talents in University,ChinaProject supported by Shenghua Yuying Program of Central South University,China
文摘An element-free Galerkin method(EFGM) is used to solve the two-dimensional(2D) ground penetrating radar(GPR)modelling problems, due to its simple pre-processing, the absence of elements and high accuracy. Different from element-based numerical methods, this approach makes nodes free from the elemental restraint and avoids the explicit mesh discretization. First, we derived the boundary value problem for the 2D GPR simulation problems. Second, a penalty function approach and a boundary condition truncated method were used to enforce the essential and the absorbing boundary conditions, respectively. A three-layered GPR model was used to verify our element-free approach. The numerical solutions show that our solutions have an excellent agreement with solutions of a finite element method(FEM). Then, we used the EFGM to simulate one more complex model to show its capability and limitations. Simulation results show that one obvious advantage of EFGM is the absence of element mesh, which makes the method very flexible. Due to the use of MLS fitting, a key feature of EFM, is that both the dependent variable and its gradient are continuous and have high precision.
