The dynamic and static modulus of elasticity （MOE） between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing （NDT）, Portable Ultras...The dynamic and static modulus of elasticity （MOE） between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing （NDT）, Portable Ultrasonic Non-destructive Digital Indicating Testing （Pundit）, Metriguard and Fast Fourier Transform （FFT） and the normal bending method. Results showed that the dynamic and static MOE of bluestained wood were higher than those of non-bluestained wood. The significant differences in dynamic MOE and static MOE were found between bulestained and non-bluestained wood, of which, the difference in each of three dynamic MOE （Ep. the ultrasonic wave modulus of elasticity, Ems, the stress wave modulus of elasticity and El, the longitudinal wave modulus of elasticity） between bulestained and non-bluestained wood arrived at the 0.01 significance level, whereas that in the static MOE at the 0.05 significance level. The differences in MOE between bulestained and non-bluestained wood were induced by the variation between sapwood and heartwood and the different densities of bulestained and non-bluestained wood. The correlation between dynamic MOE and static MOE was statistically significant at the 0.01 significance level. Although the dynamic MOE values of Ep, Em, Er were significantly different, there exists a close relationship between them （arriving at the 0.01 correlation level）. Comparative analysis among the three techniques indicated that the accurateness of FFT was higher than that of Pundit and Metriguard. Effect of tree knots on MOE was also investigated. Result showed that the dynamic and static MOE gradually decreased with the increase of knot number, indicating that knot number had significant effect on MOE value.展开更多
Dynamic elastic parameters of coal are closely linked to crack characteristics and are lithology indicators in seismic exploration. This experimental study measured ultrasonic wave velocity of coal samples considering...Dynamic elastic parameters of coal are closely linked to crack characteristics and are lithology indicators in seismic exploration. This experimental study measured ultrasonic wave velocity of coal samples considering both parallel(90°) and perpendicular(0°) to bedding planes, and then calculated the dynamic elastic parameters(Edand ld) and their anisotropy values(AEdand Ald). The variations of Edand ld,as well as AEdand Aldwere analyzed under various confining stresses. The results show that: Firstly, a critical confining pressure exists, and significant variation in the parameters can be seen below this point and weak variation appears above it. Secondly, a positive correlation exists between Edand the square of P-wave velocity(VP2), and between AEdand the P-wave velocity anisotropy(AEP) as well; however, there is no clear correlation between ldand P-wave velocity(VP). Thirdly, according to the major controlling factors of anisotropy, the coal samples with different Edand ldas well as AEdand Aldcan be divided into two types: one is mainly controlled by bedding and cracks and the other one is mainly controlled by differences of mineral compositions in directions. Consequently, this study can provide theoretical basis for future research on the dynamic elastic parameters and anisotropy of coal.展开更多
The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber ...The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.展开更多
Thorn scrub vegetation in Mexico is distributed over 50 million ha, where native tree species are the source of forage, timber, firewood and charcoal. Research describing wood durability of species from this vegetatio...Thorn scrub vegetation in Mexico is distributed over 50 million ha, where native tree species are the source of forage, timber, firewood and charcoal. Research describing wood durability of species from this vegetation type has not been fully determined, nor classified according to international standards. Thus, the aim of this study was to determine and classify the natural durability of ten woody species. Their natural durability was determined according to the European Pre-Norm 807, the loss of dynamic modulus of elasticity （MOEdyo） （MPa） was determined and wood mass loss （g） after being exposed to Trametes versicolor and Coniophora puteana fungi. Wood durability was classified accord- ing to the European Norm 350-1. Highly significant differences （p 〈 0.001） were found between the durability of woody species. The more durable species with lower MOEdyn lost were Condalia hooked （57.5% ± 0.6%）, Havardia pallens （58.2% ± 0.4%） and Acacia schaffneri （58.9% ±6.3%）. Species with lower mass loss after exposed to Coniophora puteana were Ebenopsis ebano （6.3% ±1.9%）, Condalia hooked （8.6% ±2.3%） and Cordia boissieri （11.8% ±2.3%）. E. ebano （7.1% ±2.4%）, Condalia hooked （8.2% ± 2.5%） and Cordia boissieri （11.5% ± 3.1%） showed the lower mass lost after exposed to T. versicolor. According to European Norm 350-1, three woody species were classified as very durable and durable species.展开更多
基金This paper was supported by "Wood-inorganic Res-toration Material" in "Technique Introduction and Innovation of Bio-macromolecule New Material" of Introducing Overseas Advanced Forest Technology Innovation Program of China ("948" Innovation Pro-ject, Number: 2006-4-C03)
文摘The dynamic and static modulus of elasticity （MOE） between bluestained and non-bluestained lumber of Lodgepole pine were tested and analyzed by using three methods of Non-destructive testing （NDT）, Portable Ultrasonic Non-destructive Digital Indicating Testing （Pundit）, Metriguard and Fast Fourier Transform （FFT） and the normal bending method. Results showed that the dynamic and static MOE of bluestained wood were higher than those of non-bluestained wood. The significant differences in dynamic MOE and static MOE were found between bulestained and non-bluestained wood, of which, the difference in each of three dynamic MOE （Ep. the ultrasonic wave modulus of elasticity, Ems, the stress wave modulus of elasticity and El, the longitudinal wave modulus of elasticity） between bulestained and non-bluestained wood arrived at the 0.01 significance level, whereas that in the static MOE at the 0.05 significance level. The differences in MOE between bulestained and non-bluestained wood were induced by the variation between sapwood and heartwood and the different densities of bulestained and non-bluestained wood. The correlation between dynamic MOE and static MOE was statistically significant at the 0.01 significance level. Although the dynamic MOE values of Ep, Em, Er were significantly different, there exists a close relationship between them （arriving at the 0.01 correlation level）. Comparative analysis among the three techniques indicated that the accurateness of FFT was higher than that of Pundit and Metriguard. Effect of tree knots on MOE was also investigated. Result showed that the dynamic and static MOE gradually decreased with the increase of knot number, indicating that knot number had significant effect on MOE value.
基金provided by the National Key Basic Research Development Program(No.2009CB219603)the Jiangsu Natural Science Fund Project(No.BK20130201)the Jiangsu Graduate Student Innovation Training Project(No.KYLX_1399)
文摘Dynamic elastic parameters of coal are closely linked to crack characteristics and are lithology indicators in seismic exploration. This experimental study measured ultrasonic wave velocity of coal samples considering both parallel(90°) and perpendicular(0°) to bedding planes, and then calculated the dynamic elastic parameters(Edand ld) and their anisotropy values(AEdand Ald). The variations of Edand ld,as well as AEdand Aldwere analyzed under various confining stresses. The results show that: Firstly, a critical confining pressure exists, and significant variation in the parameters can be seen below this point and weak variation appears above it. Secondly, a positive correlation exists between Edand the square of P-wave velocity(VP2), and between AEdand the P-wave velocity anisotropy(AEP) as well; however, there is no clear correlation between ldand P-wave velocity(VP). Thirdly, according to the major controlling factors of anisotropy, the coal samples with different Edand ldas well as AEdand Aldcan be divided into two types: one is mainly controlled by bedding and cracks and the other one is mainly controlled by differences of mineral compositions in directions. Consequently, this study can provide theoretical basis for future research on the dynamic elastic parameters and anisotropy of coal.
基金Standard system on forestry engineering of Ministry ofScience and Technology ( 2004DEA70900-1).
文摘The dimension lumber （45mm×90mm×3700mm） of plantation Chinese fir （Cunninghamia lanceolata （Lamb.） Hook.） was graded to four different classes as SS, No. 1, No.2 and No.3, according to national lumber grades authority （NLGA） for structure light framing and structure joists and planks. The properties of apparent density was determined at 15% moisture content, bending strength and stiffness were tested according to American Society for Testing and Materials （ASTM） D198-99, and dynamic modulus of elasticity （Eusw） was measured by ultrasonic technique, for predicting the flexural properties of different grade lumbers. The results showed that Eosw was larger than the static MOE. The relationship between Eusw and static MOE was significant at 0.01 level, and the determination coefficients （R2） of the four grade lumbers followed the sequence as R^2No.2 （0.616）〉 R^2ss （0.567）〉 R^2No1 （0.366）〉 R^2No.3 （0.137）. The R^2 of Fusw and MOR were lower than that of the Etru and MOR for each grade. The Eusw of all the grade lumbers, except No.3-grade, had significant correlation with the static MOE and MOR, thus the bending strengthof those grade lumbers can be estimated by the E The Etru valuesof four grade lumbers followed a sequence as No.2-grade （10.701 GPa） 〉 SS-grade （10.359 GPa） 〉 No.l-grade （9.840 GPa） 〉 No.3-grade （9.554 GPa）. For the same grade dimension lumber, its Eusw value was larger than static MOE. Mean values of MOR for four grade lumbers follow a sequence as No.2-grade （48.67 MPa） 〉 SS-grade （48.16 MPa） 〉 No.3-grade （46.55 MPa） 〉 No. 1-grade （43.39MPa）.
基金supported by the Professors improvement Program (PROMEP) and the Science and Technology Support Research Program (Granted to the first author PAICyT)
文摘Thorn scrub vegetation in Mexico is distributed over 50 million ha, where native tree species are the source of forage, timber, firewood and charcoal. Research describing wood durability of species from this vegetation type has not been fully determined, nor classified according to international standards. Thus, the aim of this study was to determine and classify the natural durability of ten woody species. Their natural durability was determined according to the European Pre-Norm 807, the loss of dynamic modulus of elasticity （MOEdyo） （MPa） was determined and wood mass loss （g） after being exposed to Trametes versicolor and Coniophora puteana fungi. Wood durability was classified accord- ing to the European Norm 350-1. Highly significant differences （p 〈 0.001） were found between the durability of woody species. The more durable species with lower MOEdyn lost were Condalia hooked （57.5% ± 0.6%）, Havardia pallens （58.2% ± 0.4%） and Acacia schaffneri （58.9% ±6.3%）. Species with lower mass loss after exposed to Coniophora puteana were Ebenopsis ebano （6.3% ±1.9%）, Condalia hooked （8.6% ±2.3%） and Cordia boissieri （11.8% ±2.3%）. E. ebano （7.1% ±2.4%）, Condalia hooked （8.2% ± 2.5%） and Cordia boissieri （11.5% ± 3.1%） showed the lower mass lost after exposed to T. versicolor. According to European Norm 350-1, three woody species were classified as very durable and durable species.
