A feasible approach to rectify the world's energy demand using sustainable development of adequate energy generation and storage technologies in a single channel.In this respect,we made a holistic approach with a ...A feasible approach to rectify the world's energy demand using sustainable development of adequate energy generation and storage technologies in a single channel.In this respect,we made a holistic approach with a bifunctional electrode material to perform effectively in energy generation and storage applications.MoS_(2) nanosheets were produced by the eco-friendly method and reduced graphene oxide is used to prepared by carbon soot which is derived from castor oil.The prepared soot and rGO were combined with MoS_(2) nanosheets using a simple sonication method.The as-prepared sample was introduced in the supercapacitor and DSSC application.The combination MoS_(2)@rGO provides an enhanced conversion efficiency of 11.81%and the reproducibility of DSSC is also studied.Further,MoS_(2)@rGO is used to fabricate an asymmetric supercapacitor to investigate its real-time application.The device produced the maximum power density(1666.6 mW/kg)and energy density(25.69 mWh/Kg)at 1 A/g.The asymmetric supercapacitor device holds a cyclic stability of 81.4%for 5000 cycles and it powered up an LED device for 4 min.展开更多
Development of cost-effective and robust counter electrodes(CEs) is a persistent objective for highefficiency dye-sensitized solar cells(DSSCs). To achieve this goal, we present here the hydrothermal synthesis of well...Development of cost-effective and robust counter electrodes(CEs) is a persistent objective for highefficiency dye-sensitized solar cells(DSSCs). To achieve this goal, we present here the hydrothermal synthesis of well-aligned Ni Pt alloy CEs, which is templated by ZnO nanowires and nanosheets. The preliminary results demonstrate that Ni Pt alloy electrodes are featured by increased charge-transfer processes and electrocatalytic activity in comparison with expensive Pt CE, yielding power conversion efficiencies of 8.29% and 7.41% in corresponding DSSCs with Ni Pt nanowire and nanosheet alloy CEs, respectively. Additionally, the Ni Pt alloy CEs also display extraordinary dissolution-resistant ability when suffering longterm utilization in liquid-junction DSSCs.展开更多
A flexible counter electrode(CE) for dye-sensitized solar cells(DSCs) has been fabricated using a micro-porous polyvinylidene fluoride membrane as support media and sputtered Pt as the catalytic material.Non-conventio...A flexible counter electrode(CE) for dye-sensitized solar cells(DSCs) has been fabricated using a micro-porous polyvinylidene fluoride membrane as support media and sputtered Pt as the catalytic material.Non-conventional structure DSCs have been developed by the fabricated CEs. The Pt metal was sputtered onto one surface of the membrane as the catalytic material. DSCs were assembled by attaching the Ti O2 electrode to the membrane surface without Pt coating. The membrane was with cylindrical pore geometry. It served not only as a substrate for the CE but also as a spacer for the DSC. The fabricated DSC with the flexible membrane CE showed higher photocurrent density than the conventional sandwich devices based on chemically deposited Pt/FTO glass, achieving a photovoltaic conversion efficiency of 4.43%. The results provides useful information in investigation and development of stable, low-cost, simple-design, flexible and lightweight DSCs.展开更多
The micro-ring like structured zinc oxide(ZnO) film was deposited on SnO_2: F coated glass substrate by sol-gel dip-coating technique with 1.0 g polyethylene glycol(PEG) content. The surface morphology of micro-ring s...The micro-ring like structured zinc oxide(ZnO) film was deposited on SnO_2: F coated glass substrate by sol-gel dip-coating technique with 1.0 g polyethylene glycol(PEG) content. The surface morphology of micro-ring structured ZnO film has been confirmed by the scanning electron microscope. This ZnO film is used to fabricate the solar cell with the help of ruthenium based dye and carbon counter electrode. The photoelectric and incident photon-to-current conversion efficiency was 1.17% and 48.4%, respectively. The DSC results have been compared with ZnO films prepared without PEG contents.展开更多
Solid-state fiber dye-sensitized solar cells(SS-FDSSCs) have been the subject of intensive attention and development in recent years. Although this field is only in its infancy, metal–organic frameworks(MOFs) are one...Solid-state fiber dye-sensitized solar cells(SS-FDSSCs) have been the subject of intensive attention and development in recent years. Although this field is only in its infancy, metal–organic frameworks(MOFs) are one such material that has been utilized to further improve the power conversion efficiency of solar cells. In this study, MOF-integrated DSSCs were shown to have potential in the development of solar cell devices with efficiency comparable to or better than that of conventional solar cells. The power conversion efficiency(PCE) of SS-FDSSCs was improved by embedding MOF-801 into a mesoporous-TiO_(2)(mp-TiO_(2)) layer, which was used as a photoanode in SS-FDSSCs, which are inherently flexible. The PCE of the MOF-integrated SS-FDSSCs was 6.50%, which is comparable to that of the reference devices(4.19%).The MOF-801 enhanced SS-FDSSCs decreased the series resistance(R_(s)) value, resulting in effective electron extraction with improved short-circuit current density(J_(SC)), while also increasing the shunt resistance(R_(sh)) value to prevent the recombination of photo-induced electrons. The result is an improved fill factor and, consequently, a higher value for the PCE.展开更多
A bi-layer photoanode for dye-sensitized solar cell(DSSC) was fabricated, in which TiO_2 hollow spheres(THSs) were designed as a scattering layer and P25/multi-walled carbon nanotubes(MWNTs) as an under-layer. The THS...A bi-layer photoanode for dye-sensitized solar cell(DSSC) was fabricated, in which TiO_2 hollow spheres(THSs) were designed as a scattering layer and P25/multi-walled carbon nanotubes(MWNTs) as an under-layer. The THSs were synthesized by a sacrifice template method and showed good light scattering ability as an over-layer of the photoanode. MWNTs were mixed with P25 to form an under-layer of the photoanode to improve the electron transmission ability of the photoanode. The power conversion efficiency of this kind of DSSC with bi-layer was enhanced to 5.13 %,which is 14.25 % higher than that of pure P25 DSSC.Graphical Abstract A bi-layer composite photoanode based on P25/MWNTs-THSs with improved light scattering and electron transmission, which will provide a new insight into fabrication and structure design of highly efficient dyesensitized solar cells.展开更多
Unique ZnS nanobuns decorated with reduced graphene oxide （ROO） was synthesized and found to exhibit a synergetic effect as a highly efficient and low-cost counter electrode （CE） in dye-sensitized solar cells （D...Unique ZnS nanobuns decorated with reduced graphene oxide （ROO） was synthesized and found to exhibit a synergetic effect as a highly efficient and low-cost counter electrode （CE） in dye-sensitized solar cells （DSCs）. Using this ZnS-ROO CE, a power conversion efficiency （PCE） of 7.03% was achieved. This value was 53% and 41 % higher than those of pure ZnS and ROO CEs, respectively. The ZnS-ROO nanocomposite is indeed an efficient and cost-effective Pt-like alternative for iodine reduction reaction.展开更多
New metal-free organic dye sensitizers containing mono-triphenylamine or bis-triphenylamine as the electron donor, a thiophene as the π-conjugated system, and a cyanoacrylic acid moiety as the electron acceptor were ...New metal-free organic dye sensitizers containing mono-triphenylamine or bis-triphenylamine as the electron donor, a thiophene as the π-conjugated system, and a cyanoacrylic acid moiety as the electron acceptor were synthesized. The optical and electrochemical properties of the dyes were investigated,and their performance as sensitizers in solar cells was evaluated. Dye-sensitized solar cells based on dye containing bis-triphenylamine as the electron donor produced a photon-to-current conversion efficiency of 6.06%（Jsc = 14.21 m A/cm;, Voc = 0.62 V, ff = 0.69） under 100 m W/cm;simulated AM 1.5 G solar irradiation（100 m W/cm;）.展开更多
In order to improve the performance of the dye-sensitized solar cells based on ZnO films, ZnO nanoparticles of different sizes were prepared by two methods. Some surfactants were added into the particles to form three...In order to improve the performance of the dye-sensitized solar cells based on ZnO films, ZnO nanoparticles of different sizes were prepared by two methods. Some surfactants were added into the particles to form three types of ZnO pastes. Electrodes of various thickness applied to dye-sensitized solar cell were prepared starting from each of those pastes by the screen-printing method. The performance of dye-sensitized solar cells was optimized via both the selected particle size and film thickness. The reason of the inefficiency was explained by the infrared and ultraviolet- visible absorption spectra.展开更多
Herein,we examine the performance of dye-sensitized solar cells containing five D-π-A organic dyes designed by systematic modification of π-bridge size and geometric structure.Each dye has a simple push-pull structu...Herein,we examine the performance of dye-sensitized solar cells containing five D-π-A organic dyes designed by systematic modification of π-bridge size and geometric structure.Each dye has a simple push-pull structure with a triarylamino group as an electron donor,bithiophene-4,4-dimethyl-4 H-cyclopenta 1,2-b:5,4-b’]dithiophene(M11),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophenethiophene(M12),thiophene-4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M13),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene-benzene(M14),and 4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M15)units asπ-bridges,and cyanoacrylic acid as an electron acceptor/anchor.The extension of theπ-bridge linkage favors wide-range absorption but,because of the concomitant molecular volume increase,hinders the efficient adsorption of dyes on the TiO_(2) film surface.Hence,higher loadings are achieved for smaller dye molecules,resulting in(i)a shift of the TiO_(2) conduction band edge to more negative values,(ii)a greater photocurrent,and(iii)suppressed charge recombination between the photoanode and the redox couple in the electrolyte.Consequently,under one-sun equivalent illumination(AM 1.5 G,100 mW/cm^(2)),the highest photovoltage,photocurrent,and conversion efficiency(η=7.19%)are observed for M15,which has the smallest molecular volume among M series dyes.展开更多
Platinum nanoparticles （PtNPs）/graphene composite materials are synthesized by a controlled chemical reduction of H2PtC16 on graphene sheets. The electrocatalytic activity of a PtNPs/graphene composite counter elect...Platinum nanoparticles （PtNPs）/graphene composite materials are synthesized by a controlled chemical reduction of H2PtC16 on graphene sheets. The electrocatalytic activity of a PtNPs/graphene composite counter electrode for a dye-sensitized solar cell （DSSC） is investigated. The results demonstrate that the PtNPs/graphene composite has high electrocatalytic activity for the dye-sensitized solar cell. The cell employing PtNPs （1.6 wt%）/graphene counter electrode reaches an conversion efficiency （η） of 3.89% upon the excitation of 100 mW/cm2 AM 1.5 white light, which is comparable to that of the cell with a Pt-film counter electrode （7 = 3.76%）. It suggests that one can use only 14% Pt content of the conventional Pt-film counter electrode to obtain a comparable conversion efficiency. It may be possible to obtain a high performance DSSC using the PtNPs/graphene composite with a very low Pt content as a counter electrode due to its simplicity, low cost, and large scalability.展开更多
We applied the reduced graphene oxide/multi-walled carbon nanotubes/nickel oxide(RGO/MWCNTs/Ni O)nanocomposite as the counter electrode(CE) in dye-sensitized solar cells(DSSCs) on fluorine-doped tin oxide substrates b...We applied the reduced graphene oxide/multi-walled carbon nanotubes/nickel oxide(RGO/MWCNTs/Ni O)nanocomposite as the counter electrode(CE) in dye-sensitized solar cells(DSSCs) on fluorine-doped tin oxide substrates by blade doctor method. Power conversion efficiency(PCE) of 8.13 % was achieved for this DSSCs device, which is higher than that of DSSCs devices using Ni O, RGO, and RGO/Ni O-CE(PCE = 2.71 %, PCE = 6.77 % and PCE = 7.63 %). Also, the fill factor of the DSSCs devices using the RGO/MWCNTs/Ni O-CE was better than that of other CEs. The electron transfer measurement of cyclic voltammetry and electrochemical impedance spectroscopy showed that RGO/MWCNTs/Ni O film could provide fast electron transfer between the CE and the electrolyte, and high electrocatalytic activity for the reduction of triiodide in a CE based on RGO/MWCNTs/Ni O in a DSSC.展开更多
TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydr...TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.展开更多
We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of ...We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of nanoparticles on the fibers is controlled by varying their feed rates during electrospinning. The FP composites having three different particle loading are prepared by the methodology and the FP with the highest particle loading （denoted as FP-3 in the manuscript） showed the best overall efficiency of 9.15% in comparison to the other compositions of the FP （FP-2, 8.15% and FP-1, Z51%, respectively） and nanofibers （F） and nanoparticles （P） separately （7.21 and 7.81, respectively）. All the material systems are characterized by spec- troscopy, microscopy, surface area measurements and the devices are characterized by current-voltage （I-V）, incident photon-to-current conversion efficiency （IPCE）, electrochemical impedance measurements, etc. I-V, dye-loading and reflectance measurements throw light on the overall performance of the DSC devices.展开更多
Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time ...Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time sta- bility is still to be acquired. In recent years research on solid and quasi-solid state electrolytes is extensively in- creased. Various quasi-solid electrolytes, including composites polymer electrolytes, ionic liquid electrolytes, thermoplastic polymer electrolytes and thermosetting polymer electrolytes have been used. Performance and stability of a quasi-solid state electrolyte are between liquid and solid electrolytes. High photovoltaic performances of QS-DSSCs along better long-term stability can be obtained by designing and optimizing quasi-solid electrolytes. It is a prospective candidate for highly efficient and stable DSSCs.展开更多
This study presents a systematic review of the literature pertaining to dye-sensitized solar cells(DSSCs), in order to anticipate the direction and speed of change in technology trend. To study the general progression...This study presents a systematic review of the literature pertaining to dye-sensitized solar cells(DSSCs), in order to anticipate the direction and speed of change in technology trend. To study the general progression in DSSC research, we have assessed the evolution in annual DSSCs publications and their citations. Further, in order to identify the intellectual bases, we have also classified the journals, authors, institutes, and countries according to their scientific productivity in the field of DSSCs research during the period of 2007–2017.展开更多
Bipyridylporphyrin derivatives possessing a porphyrin moiety as the electron donor and bipyridyl moiety as the electron-acceptor were designed and synthesized for dye-sensitized solar cells （DSSCs）. The photo- physi...Bipyridylporphyrin derivatives possessing a porphyrin moiety as the electron donor and bipyridyl moiety as the electron-acceptor were designed and synthesized for dye-sensitized solar cells （DSSCs）. The photo- physical and electrochemical properties were investigated by absorption spectrometry and cyclic voltam- metry. Density functional theory （DFT） was employed to study electron distribution. From the photovoltaic performance measurements, a maximum conversion efficiency （η） of 0.38% was achieved based on the bipyridylporphyrin ruthenium dye A7 （Jsc = 1.33 mA/cm^2, Voc = 0.45 V, FF = 0.64） under 1,5 irradiation （100 mW/cm^2）.展开更多
This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transf...This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.展开更多
Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorp...Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorption onto Ti02, ultrafast electron injection, hot-electron injection, multiple-exciton generation, and electron-hole recombination. Advanced exper- imental techniques and theoretical approaches are briefly summarized, and then progressive achievements in photovoltaic device optimization based on insights from atomic scale investigations are introduced. Finally, some challenges and oppor- tunities for further improvement of dye solar cells are presented.展开更多
Three-dimensional （3D） printing technology is employed to improve the photovoltaic and photothermal conversion efficiency of dye-sensitized solar cell （DSC） module. The 3D-printed concentrator is optically designe...Three-dimensional （3D） printing technology is employed to improve the photovoltaic and photothermal conversion efficiency of dye-sensitized solar cell （DSC） module. The 3D-printed concentrator is optically designed and improves the photovoltaic efficiency of the DSC module from 5.48% to 7.03%. Additionally, with the 3D-printed microfluidic device serving as water cooling, the temperature of the DSC can be effectively controlled, which is beneficial for keeping a high photovoltaic conversion efficiency for DSC module. Moreover, the 3D-printed microfluidic device can realize photothermal conversion with an instantaneous photothermal efficiency of 42.1%. The integrated device realizes a total photovoltaic and photothermal conversion efficiency of 49% at the optimal working condition.展开更多
基金financial support by MHRD-SPARC-890(2019)UAE for financial support+1 种基金the full financial support by MHRD-SPARC-890(2019)the instrumentation facility utilized from RUSA 2.0 grant No.F.24-51/2014-U,Policy(TNMultiGen)Govt of India Projects。
文摘A feasible approach to rectify the world's energy demand using sustainable development of adequate energy generation and storage technologies in a single channel.In this respect,we made a holistic approach with a bifunctional electrode material to perform effectively in energy generation and storage applications.MoS_(2) nanosheets were produced by the eco-friendly method and reduced graphene oxide is used to prepared by carbon soot which is derived from castor oil.The prepared soot and rGO were combined with MoS_(2) nanosheets using a simple sonication method.The as-prepared sample was introduced in the supercapacitor and DSSC application.The combination MoS_(2)@rGO provides an enhanced conversion efficiency of 11.81%and the reproducibility of DSSC is also studied.Further,MoS_(2)@rGO is used to fabricate an asymmetric supercapacitor to investigate its real-time application.The device produced the maximum power density(1666.6 mW/kg)and energy density(25.69 mWh/Kg)at 1 A/g.The asymmetric supercapacitor device holds a cyclic stability of 81.4%for 5000 cycles and it powered up an LED device for 4 min.
基金financial supports from the National Natural Science Foundation of China(21503202,61604143,51362031)Shandong Provincial Natural Science Foundation(JQ201714)and Fundamental Research Funds for the Central Universities(201762018)
文摘Development of cost-effective and robust counter electrodes(CEs) is a persistent objective for highefficiency dye-sensitized solar cells(DSSCs). To achieve this goal, we present here the hydrothermal synthesis of well-aligned Ni Pt alloy CEs, which is templated by ZnO nanowires and nanosheets. The preliminary results demonstrate that Ni Pt alloy electrodes are featured by increased charge-transfer processes and electrocatalytic activity in comparison with expensive Pt CE, yielding power conversion efficiencies of 8.29% and 7.41% in corresponding DSSCs with Ni Pt nanowire and nanosheet alloy CEs, respectively. Additionally, the Ni Pt alloy CEs also display extraordinary dissolution-resistant ability when suffering longterm utilization in liquid-junction DSSCs.
基金supported by National Natural Science Foundation of China(No.10774046)Shanghai Municipal Science&Technology Committee(No.09JC1404600+1 种基金No.0852nm06100 and No.08230705400)Singapore Ministry of Education innovation fund(MOE IF Funding MOE2008-IF-1-016)
文摘A flexible counter electrode(CE) for dye-sensitized solar cells(DSCs) has been fabricated using a micro-porous polyvinylidene fluoride membrane as support media and sputtered Pt as the catalytic material.Non-conventional structure DSCs have been developed by the fabricated CEs. The Pt metal was sputtered onto one surface of the membrane as the catalytic material. DSCs were assembled by attaching the Ti O2 electrode to the membrane surface without Pt coating. The membrane was with cylindrical pore geometry. It served not only as a substrate for the CE but also as a spacer for the DSC. The fabricated DSC with the flexible membrane CE showed higher photocurrent density than the conventional sandwich devices based on chemically deposited Pt/FTO glass, achieving a photovoltaic conversion efficiency of 4.43%. The results provides useful information in investigation and development of stable, low-cost, simple-design, flexible and lightweight DSCs.
基金the Ministry of EducationCulture,Sports,Science and Technology,Japan for financial support
文摘The micro-ring like structured zinc oxide(ZnO) film was deposited on SnO_2: F coated glass substrate by sol-gel dip-coating technique with 1.0 g polyethylene glycol(PEG) content. The surface morphology of micro-ring structured ZnO film has been confirmed by the scanning electron microscope. This ZnO film is used to fabricate the solar cell with the help of ruthenium based dye and carbon counter electrode. The photoelectric and incident photon-to-current conversion efficiency was 1.17% and 48.4%, respectively. The DSC results have been compared with ZnO films prepared without PEG contents.
基金supported by the Fundamental Research Program(PNK 7350 and PNK 7340)of the Korea Institute of Materials Science(KIMS)the National Research Foundation(NRF)grant funded by the Korean government(MEST)(2021R1A2C2014192)。
文摘Solid-state fiber dye-sensitized solar cells(SS-FDSSCs) have been the subject of intensive attention and development in recent years. Although this field is only in its infancy, metal–organic frameworks(MOFs) are one such material that has been utilized to further improve the power conversion efficiency of solar cells. In this study, MOF-integrated DSSCs were shown to have potential in the development of solar cell devices with efficiency comparable to or better than that of conventional solar cells. The power conversion efficiency(PCE) of SS-FDSSCs was improved by embedding MOF-801 into a mesoporous-TiO_(2)(mp-TiO_(2)) layer, which was used as a photoanode in SS-FDSSCs, which are inherently flexible. The PCE of the MOF-integrated SS-FDSSCs was 6.50%, which is comparable to that of the reference devices(4.19%).The MOF-801 enhanced SS-FDSSCs decreased the series resistance(R_(s)) value, resulting in effective electron extraction with improved short-circuit current density(J_(SC)), while also increasing the shunt resistance(R_(sh)) value to prevent the recombination of photo-induced electrons. The result is an improved fill factor and, consequently, a higher value for the PCE.
基金the support provided by the National High Technology Research and Development Program 863 (No.2006AA05Z417)Science and Technology Platform Construction Project of Dalian (2010-354)+4 种基金the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning (No.2013-70)‘‘Shu Guang’’ project supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation (No.13SG55)National Natural Science Foundation of China (NSFC) (No.61376009)Science and Technology Commission of Shanghai Municipality (No.14YF1410500)Shanghai Young Teacher Supporting Foundation (No.ZZEGD14011)
文摘A bi-layer photoanode for dye-sensitized solar cell(DSSC) was fabricated, in which TiO_2 hollow spheres(THSs) were designed as a scattering layer and P25/multi-walled carbon nanotubes(MWNTs) as an under-layer. The THSs were synthesized by a sacrifice template method and showed good light scattering ability as an over-layer of the photoanode. MWNTs were mixed with P25 to form an under-layer of the photoanode to improve the electron transmission ability of the photoanode. The power conversion efficiency of this kind of DSSC with bi-layer was enhanced to 5.13 %,which is 14.25 % higher than that of pure P25 DSSC.Graphical Abstract A bi-layer composite photoanode based on P25/MWNTs-THSs with improved light scattering and electron transmission, which will provide a new insight into fabrication and structure design of highly efficient dyesensitized solar cells.
基金supported by the National Natural Science Foundation of China(Grant No.51172102,51302125 and 51303076)
文摘Unique ZnS nanobuns decorated with reduced graphene oxide （ROO） was synthesized and found to exhibit a synergetic effect as a highly efficient and low-cost counter electrode （CE） in dye-sensitized solar cells （DSCs）. Using this ZnS-ROO CE, a power conversion efficiency （PCE） of 7.03% was achieved. This value was 53% and 41 % higher than those of pure ZnS and ROO CEs, respectively. The ZnS-ROO nanocomposite is indeed an efficient and cost-effective Pt-like alternative for iodine reduction reaction.
基金supported by the National Natural Science Foundation of China (Nos. 21273026 and 21572028) for their financial supportsupported by the Fundamental Research Funds for the Central Universities (DUT15LK37)the Outstanding Young Scholars Development Growth Plan of universities in Liaoning Province (LJQ2015027)
文摘New metal-free organic dye sensitizers containing mono-triphenylamine or bis-triphenylamine as the electron donor, a thiophene as the π-conjugated system, and a cyanoacrylic acid moiety as the electron acceptor were synthesized. The optical and electrochemical properties of the dyes were investigated,and their performance as sensitizers in solar cells was evaluated. Dye-sensitized solar cells based on dye containing bis-triphenylamine as the electron donor produced a photon-to-current conversion efficiency of 6.06%（Jsc = 14.21 m A/cm;, Voc = 0.62 V, ff = 0.69） under 100 m W/cm;simulated AM 1.5 G solar irradiation（100 m W/cm;）.
基金supported by the National Basic Research Program of China (No. G2000028206)
文摘In order to improve the performance of the dye-sensitized solar cells based on ZnO films, ZnO nanoparticles of different sizes were prepared by two methods. Some surfactants were added into the particles to form three types of ZnO pastes. Electrodes of various thickness applied to dye-sensitized solar cell were prepared starting from each of those pastes by the screen-printing method. The performance of dye-sensitized solar cells was optimized via both the selected particle size and film thickness. The reason of the inefficiency was explained by the infrared and ultraviolet- visible absorption spectra.
基金supported by Basic Science Research through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(No.2017R1D1A1B03035077)also supported by Research Program(2018R1A2B2006708)+1 种基金Technology Development Program to Solve Climate Changes(2015M1A2A2057062)funded by the National Research Foundation under the Ministry of Science and ICT,Republic of Koreasupported by the Defense Challengeable Future Technology Program of the Agency for Defense Development,Republic of Korea。
文摘Herein,we examine the performance of dye-sensitized solar cells containing five D-π-A organic dyes designed by systematic modification of π-bridge size and geometric structure.Each dye has a simple push-pull structure with a triarylamino group as an electron donor,bithiophene-4,4-dimethyl-4 H-cyclopenta 1,2-b:5,4-b’]dithiophene(M11),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophenethiophene(M12),thiophene-4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M13),4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene-benzene(M14),and 4,4-dimethyl-4 H-cyclopenta[1,2-b:5,4-b’]dithiophene(M15)units asπ-bridges,and cyanoacrylic acid as an electron acceptor/anchor.The extension of theπ-bridge linkage favors wide-range absorption but,because of the concomitant molecular volume increase,hinders the efficient adsorption of dyes on the TiO_(2) film surface.Hence,higher loadings are achieved for smaller dye molecules,resulting in(i)a shift of the TiO_(2) conduction band edge to more negative values,(ii)a greater photocurrent,and(iii)suppressed charge recombination between the photoanode and the redox couple in the electrolyte.Consequently,under one-sun equivalent illumination(AM 1.5 G,100 mW/cm^(2)),the highest photovoltage,photocurrent,and conversion efficiency(η=7.19%)are observed for M15,which has the smallest molecular volume among M series dyes.
基金Project supported by the Program for New Century Excellent Talents in University,China (Grant No. NCET-10-0291)the Fundamental Research Funds for the Central Universities,China (Grant Nos. ZYGX2009X005 and ZYGX2010J031)+1 种基金the Startup Research Project of University of Electronic Science and Technology of China (Grant No.Y02002010301041)the National Natural Science Foundation of China (Grant Nos. 50832007,11074285,and 51202022)
文摘Platinum nanoparticles （PtNPs）/graphene composite materials are synthesized by a controlled chemical reduction of H2PtC16 on graphene sheets. The electrocatalytic activity of a PtNPs/graphene composite counter electrode for a dye-sensitized solar cell （DSSC） is investigated. The results demonstrate that the PtNPs/graphene composite has high electrocatalytic activity for the dye-sensitized solar cell. The cell employing PtNPs （1.6 wt%）/graphene counter electrode reaches an conversion efficiency （η） of 3.89% upon the excitation of 100 mW/cm2 AM 1.5 white light, which is comparable to that of the cell with a Pt-film counter electrode （7 = 3.76%）. It suggests that one can use only 14% Pt content of the conventional Pt-film counter electrode to obtain a comparable conversion efficiency. It may be possible to obtain a high performance DSSC using the PtNPs/graphene composite with a very low Pt content as a counter electrode due to its simplicity, low cost, and large scalability.
基金supported by the National Basic Research Program(2011CB933300)of Chinathe National Natural Science Foundation of China(11374110,11204093,51371085,and 11304106)
文摘We applied the reduced graphene oxide/multi-walled carbon nanotubes/nickel oxide(RGO/MWCNTs/Ni O)nanocomposite as the counter electrode(CE) in dye-sensitized solar cells(DSSCs) on fluorine-doped tin oxide substrates by blade doctor method. Power conversion efficiency(PCE) of 8.13 % was achieved for this DSSCs device, which is higher than that of DSSCs devices using Ni O, RGO, and RGO/Ni O-CE(PCE = 2.71 %, PCE = 6.77 % and PCE = 7.63 %). Also, the fill factor of the DSSCs devices using the RGO/MWCNTs/Ni O-CE was better than that of other CEs. The electron transfer measurement of cyclic voltammetry and electrochemical impedance spectroscopy showed that RGO/MWCNTs/Ni O film could provide fast electron transfer between the CE and the electrolyte, and high electrocatalytic activity for the reduction of triiodide in a CE based on RGO/MWCNTs/Ni O in a DSSC.
基金Project supported by the Fundamental Research Funds for the Central Universities,China(Grant No.2013XK07)
文摘TiO2 is a wide band gap semiconductor with important applications in photovoltaic cells. Vertically aligned Tit2 nanorod arrays （NRs） are grown on the fluorine-doped tin oxide （FTO） substrates by a multicycle hydrothermal synthesis process. The samples are characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM）, high-resolution transmission electron microscopy （HRTEM）, and selected-area electron diffraction （SAED）. It is found that dye-sensitized solar cells （DSSCs） assembled by the as-prepared Tit2 single-crystal NRs exhibit different trends under the condition of different nucleation and growth concentrations. Optimum cell performance is obtained with high nucleation concentration and low growth cycle concentration. The efficiency enhancement is mainly attributed to the improved specific surface area of the nanorod.
基金supported by Ministry of New and Renewable Energy(MNRE)the Solar Energy Research Initiative(SERI),respectively.of Govt.of India
文摘We report a facile method for the fabrication of TiO2 nanofiber-nanoparticle composite （FP） via. simulta- neous electrospraying and electrospinning for dye-sensitized solar cell （DSC） applications. The loading of nanoparticles on the fibers is controlled by varying their feed rates during electrospinning. The FP composites having three different particle loading are prepared by the methodology and the FP with the highest particle loading （denoted as FP-3 in the manuscript） showed the best overall efficiency of 9.15% in comparison to the other compositions of the FP （FP-2, 8.15% and FP-1, Z51%, respectively） and nanofibers （F） and nanoparticles （P） separately （7.21 and 7.81, respectively）. All the material systems are characterized by spec- troscopy, microscopy, surface area measurements and the devices are characterized by current-voltage （I-V）, incident photon-to-current conversion efficiency （IPCE）, electrochemical impedance measurements, etc. I-V, dye-loading and reflectance measurements throw light on the overall performance of the DSC devices.
文摘Dye-sensitized solar cells （DSSCs） are the most promising, low cost and most extensively investigated solar cells. They are famous for their clean and efficient solar energy conversion. Nevertheless this, long-time sta- bility is still to be acquired. In recent years research on solid and quasi-solid state electrolytes is extensively in- creased. Various quasi-solid electrolytes, including composites polymer electrolytes, ionic liquid electrolytes, thermoplastic polymer electrolytes and thermosetting polymer electrolytes have been used. Performance and stability of a quasi-solid state electrolyte are between liquid and solid electrolytes. High photovoltaic performances of QS-DSSCs along better long-term stability can be obtained by designing and optimizing quasi-solid electrolytes. It is a prospective candidate for highly efficient and stable DSSCs.
文摘This study presents a systematic review of the literature pertaining to dye-sensitized solar cells(DSSCs), in order to anticipate the direction and speed of change in technology trend. To study the general progression in DSSC research, we have assessed the evolution in annual DSSCs publications and their citations. Further, in order to identify the intellectual bases, we have also classified the journals, authors, institutes, and countries according to their scientific productivity in the field of DSSCs research during the period of 2007–2017.
基金financially supported by the National Science and Technology Development Agency (BT-B-01-A5-09-5202)the Thailand Research Fund (TRF) under the Golden Jubilee Ph.D. Program (Duanglaor P.,Grant No.PHD/0226/2549+1 种基金3.C.CU/49/W.1)Rachadapiseksompot Endowment Fund of Chulalongkorn University for postdoctoral fellowship (Thiampanya P.)
文摘Bipyridylporphyrin derivatives possessing a porphyrin moiety as the electron donor and bipyridyl moiety as the electron-acceptor were designed and synthesized for dye-sensitized solar cells （DSSCs）. The photo- physical and electrochemical properties were investigated by absorption spectrometry and cyclic voltam- metry. Density functional theory （DFT） was employed to study electron distribution. From the photovoltaic performance measurements, a maximum conversion efficiency （η） of 0.38% was achieved based on the bipyridylporphyrin ruthenium dye A7 （Jsc = 1.33 mA/cm^2, Voc = 0.45 V, FF = 0.64） under 1,5 irradiation （100 mW/cm^2）.
基金Project supported by the Program of Science and Technology Commission of Shanghai Municipality (Grant No 03DZ12032)the Program for New Century Excellent Talents in University in China (Grant No NCET-04-0406)
文摘This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11222431 and 11074287)the National Basic Key Research Program of China(Grant No.2012CB921403)the Hundred-Talent Program of the Chinese Academy of Sciences
文摘Recent progress in dye-sensitized solar cells （DSC） research is reviewed, focusing on atomic-scale investigations of the interface electronic structures and dynamical processes, including the structure of dye adsorption onto Ti02, ultrafast electron injection, hot-electron injection, multiple-exciton generation, and electron-hole recombination. Advanced exper- imental techniques and theoretical approaches are briefly summarized, and then progressive achievements in photovoltaic device optimization based on insights from atomic scale investigations are introduced. Finally, some challenges and oppor- tunities for further improvement of dye solar cells are presented.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.21103194,51506205,and 21673243)the Science and Technology Planning Project of Guangdong Province,China(Grant Nos.2014A010106018 and 2013A011401011)+3 种基金the Guangdong-Hong Kong Joint Innovation Project of Guangdong Province,China(Grant No.2014B050505015)the Special Support Program of Guangdong Province,China(Grant No.2014TQ01N610)the Director Innovation Foundation of Guangzhou Institute of Energy Conversion,China(Grant No.y307p81001)the Solar Photothermal Advanced Materials Engineering Research Center Construction Project of Guangdong Province,China(Grant No.2014B090904071)
文摘Three-dimensional （3D） printing technology is employed to improve the photovoltaic and photothermal conversion efficiency of dye-sensitized solar cell （DSC） module. The 3D-printed concentrator is optically designed and improves the photovoltaic efficiency of the DSC module from 5.48% to 7.03%. Additionally, with the 3D-printed microfluidic device serving as water cooling, the temperature of the DSC can be effectively controlled, which is beneficial for keeping a high photovoltaic conversion efficiency for DSC module. Moreover, the 3D-printed microfluidic device can realize photothermal conversion with an instantaneous photothermal efficiency of 42.1%. The integrated device realizes a total photovoltaic and photothermal conversion efficiency of 49% at the optimal working condition.
