期刊文献+
共找到402篇文章
< 1 2 21 >
每页显示 20 50 100
Incremental multivariable predictive functional control and its application in a gas fractionation unit 被引量:3
1
作者 施惠元 苏成利 +3 位作者 曹江涛 李平 宋英莉 李宁波 《Journal of Central South University》 SCIE EI CAS CSCD 2015年第12期4653-4668,共16页
The control of gas fractionation unit(GFU) in petroleum industry is very difficult due to multivariable characteristics and a large time delay.PID controllers are still applied in most industry processes.However,the t... The control of gas fractionation unit(GFU) in petroleum industry is very difficult due to multivariable characteristics and a large time delay.PID controllers are still applied in most industry processes.However,the traditional PID control has been proven not sufficient and capable for this particular petro-chemical process.In this work,an incremental multivariable predictive functional control(IMPFC) algorithm was proposed with less online computation,great precision and fast response.An incremental transfer function matrix model was set up through the step-response data,and predictive outputs were deduced with the theory of single-value optimization.The results show that the method can optimize the incremental control variable and reject the constraint of the incremental control variable with the positional predictive functional control algorithm,and thereby making the control variable smoother.The predictive output error and future set-point were approximated by a polynomial,which can overcome the problem under the model mismatch and make the predictive outputs track the reference trajectory.Then,the design of incremental multivariable predictive functional control was studied.Simulation and application results show that the proposed control strategy is effective and feasible to improve control performance and robustness of process. 展开更多
关键词 gas fractionation unit multivariable process incremental predictive functional control
在线阅读 下载PDF
Active disturbance rejected predictive functional control for space vehicles with RCS 被引量:3
2
作者 TIAN Jiayi ZHANG Shifeng 《Journal of Systems Engineering and Electronics》 SCIE EI CSCD 2018年第5期1022-1035,共14页
Reaction control system(RCS) is a powerful and efficient actuator for space vehicles attitude control, which is typically characterized as a pulsed unilateral effector only with two states(off/on). Along with inevitab... Reaction control system(RCS) is a powerful and efficient actuator for space vehicles attitude control, which is typically characterized as a pulsed unilateral effector only with two states(off/on). Along with inevitable internal uncertainties and external disturbances in practice, this inherent nonlinear character always hinders space vehicles autopilot from pursuing precise tracking performance. Compared to most of pre-existing methodologies that passively suppress the uncertainties and disturbances, a design based on predictive functional control(PFC) and generalized extended state observer(GESO) is firstly proposed for three-axis RCS control system to actively reject that with no requirement for additional fuel consumption. To obtain a high fidelity predictive model on which the performance of PFC greatly depends, the nonlinear coupling multiple-input multiple-output(MIMO) flight dynamics model is parameterized as a state-dependent coefficient form. And based on that, a MIMO PFC algorithm in state space domain for a plant of arbitrary orders is deduced in this paper.The internal uncertainties and external disturbances are lumped as a total disturbance, which is estimated and cancelled timely to further enhance the robustness. The continuous control command synthesised by above controller-rejector tandem is finally modulated by pulse width pulse frequency modulator(PWPF) to on-off signals to meet RCS requirement. The robustness and feasibility of the proposed design are validated by a series of performance comparison simulations with some prominent methods in the presence of significant perturbations and disturbances, as well as measurement noise. 展开更多
关键词 reaction control system(RCS) predictive functional control(PFC) generalized extended state observer(GESO) pulse width pulse frequency(PWPF) multiple-input multiple-output(MIMO)
在线阅读 下载PDF
Adaptive predictive functional control based on Takagi-Sugeno model and its application to pH process 被引量:5
3
作者 苏成利 李平 《Journal of Central South University》 SCIE EI CAS 2010年第2期363-371,共9页
In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive fun... In order to obtain accurate prediction model and compensate for the influence of model mismatch on the control performance of the system and avoid solving nonlinear programming problem,an adaptive fuzzy predictive functional control(AFPFC) scheme for multivariable nonlinear systems was proposed.Firstly,multivariable nonlinear systems were described based on Takagi-Sugeno(T-S) fuzzy models;assuming that the antecedent parameters of T-S models were kept,the consequent parameters were identified on-line by using the weighted recursive least square(WRLS) method.Secondly,the identified T-S models were linearized to be time-varying state space model at each sampling instant.Finally,by using linear predictive control technique the analysis solution of the optimal control law of AFPFC was established.The application results for pH neutralization process show that the absolute error between the identified T-S model output and the process output is smaller than 0.015;the tracking ability of the proposed AFPFC is superior to that of non-AFPFC(NAFPFC) for pH process without disturbances,the overshoot of the effluent pH value of AFPFC with disturbances is decreased by 50% compared with that of NAFPFC;when the process parameters of AFPFC vary with time the integrated absolute error(IAE) performance index still retains to be less than 200 compared with that of NAFPFC. 展开更多
关键词 Takagi-Sugeno (T-S) model adaptive fuzzy predictive functional control (AFPFC) weighted recursive least square (WRLS) pH process
在线阅读 下载PDF
Performance Monitoring of the Data-driven Subspace Predictive Control Systems Based on Historical Objective Function Benchmark 被引量:3
4
作者 王陆 李柠 李少远 《自动化学报》 EI CSCD 北大核心 2013年第5期542-547,共6页
关键词 预测控制系统 性能监控 数据驱动 子空间 历史 基准 监视控制器 目标函数
在线阅读 下载PDF
Support vector machine based nonlinear model multi-step-ahead optimizing predictive control 被引量:9
5
作者 钟伟民 皮道映 孙优贤 《Journal of Central South University of Technology》 EI 2005年第5期591-595,共5页
A support vector machine with guadratic polynomial kernel function based nonlinear model multi-step-ahead optimizing predictive controller was presented. A support vector machine based predictive model was established... A support vector machine with guadratic polynomial kernel function based nonlinear model multi-step-ahead optimizing predictive controller was presented. A support vector machine based predictive model was established by black-box identification. And a quadratic objective function with receding horizon was selected to obtain the controller output. By solving a nonlinear optimization problem with equality constraint of model output and boundary constraint of controller output using Nelder-Mead simplex direct search method, a sub-optimal control law was achieved in feature space. The effect of the controller was demonstrated on a recognized benchmark problem and a continuous-stirred tank reactor. The simulation results show that the multi-step-ahead predictive controller can be well applied to nonlinear system, with better performance in following reference trajectory and disturbance-rejection. 展开更多
关键词 nonlinear model predictive control support vector machine nonlinear system identification kernel function nonlinear optimization
在线阅读 下载PDF
An improved constrained model predictive control approach for Hammerstein-Wiener nonlinear systems 被引量:1
6
作者 李妍 陈雪原 +1 位作者 毛志忠 袁平 《Journal of Central South University》 SCIE EI CAS 2014年第3期926-932,共7页
Many industry processes can be described as Hammerstein-Wiener nonlinear systems. In this work, an improved constrained model predictive control algorithm is presented for Hammerstein-Wiener systems. In the new approa... Many industry processes can be described as Hammerstein-Wiener nonlinear systems. In this work, an improved constrained model predictive control algorithm is presented for Hammerstein-Wiener systems. In the new approach, the maximum and minimum of partial derivative for input and output nonlinearities are solved in the neighbourhood of the equilibrium. And several parameter-dependent Lyapunov functions, each one corresponding to a different vertex of polytopic descriptions models, are introduced to analyze the stability of Hammerstein-Wiener systems, but only one Lyapunov function is utilized to analyze system stability like the traditional method. Consequently, the conservation of the traditional quadratic stability is removed, and the terminal regions are enlarged. Simulation and field trial results show that the proposed algorithm is valid. It has higher control precision and shorter blowing time than the traditional approach. 展开更多
关键词 Hammerstein-Wiener nonlinear systems model predictive control parameter-dependent Lyapunov functions stability linear matrix inequalities (LMIs)
在线阅读 下载PDF
基于转矩和悬浮力分配函数的单绕组BSRMWR预测控制
7
作者 杨艳 吴苏 +1 位作者 刘泽远 刘程子 《中国电机工程学报》 北大核心 2025年第15期6116-6128,I0030,共14页
由于单绕组宽转子齿结构无轴承开关磁阻电机的供电方式和双凸极结构,其在应用传统电流斩波控制策略时存在较大的转矩脉动和悬浮力波动以及悬浮运行不稳定的情况。为克服这些不足,该文基于该电机的本体结构与工作原理,提出适用于该电机... 由于单绕组宽转子齿结构无轴承开关磁阻电机的供电方式和双凸极结构,其在应用传统电流斩波控制策略时存在较大的转矩脉动和悬浮力波动以及悬浮运行不稳定的情况。为克服这些不足,该文基于该电机的本体结构与工作原理,提出适用于该电机的转矩分配函数和悬浮力分配函数;结合模型预测控制理论,研究一种基于转矩分配函数和悬浮力分配函数的预测转矩和预测悬浮力控制方法;通过仿真软件及硬件平台,验证该控制方法的效果。结果表明,该控制方法不仅可以实现电机的稳定悬浮运行,而且在抑制转矩脉动和悬浮力波动方面具有优越性。 展开更多
关键词 无轴承开关磁阻电机 单绕组 宽转子齿 转矩分配函数 悬浮力分配函数 模型预测控制
在线阅读 下载PDF
港口重载AGV转向稳定性容错控制策略
8
作者 刘璇 刘玉卿 +2 位作者 王子航 张明路 张建华 《计算机集成制造系统》 北大核心 2025年第1期47-55,共9页
针对四轮独立驱动与转向(4WID-4WIS)型港口重载自动导引车(AGV)常见的驱动电机失效情况,提出了三层控制结构的容错控制策略来进行转向稳定性容错控制。上层控制模块设计为模型预测控制器(MPC)与PI车速跟随控制器,实现港口AGV的路径跟踪... 针对四轮独立驱动与转向(4WID-4WIS)型港口重载自动导引车(AGV)常见的驱动电机失效情况,提出了三层控制结构的容错控制策略来进行转向稳定性容错控制。上层控制模块设计为模型预测控制器(MPC)与PI车速跟随控制器,实现港口AGV的路径跟踪;中层控制模块设计为横摆角速度、质心侧偏角RBF神经网络鲁棒滑模控制器,用来计算出最佳附加横摆力矩;下层控制模块设计为失效分配策略,对力矩进行重新分配。最后,搭建了CarMaker测试平台,通过实验验证了容错控制策略的有效性与优越性。 展开更多
关键词 港口重载AGV 模型预测控制器 PI车速跟随控制器 RBF神经网络 滑模控制 失效分配
在线阅读 下载PDF
结合有限集模型预测的改进下垂功率均分策略
9
作者 程勇 周江浩 杜光辉 《燕山大学学报》 北大核心 2025年第3期219-228,共10页
针对低压微电网中并联逆变器由于线路阻抗参数不匹配造成有功功率分配失衡,以及有限集模型预测控制多目标优化权重系数设计复杂问题,提出一种结合有限集模型预测的改进下垂控制策略。首先通过改进传统下垂控制,实现有功功率精确分配。... 针对低压微电网中并联逆变器由于线路阻抗参数不匹配造成有功功率分配失衡,以及有限集模型预测控制多目标优化权重系数设计复杂问题,提出一种结合有限集模型预测的改进下垂控制策略。首先通过改进传统下垂控制,实现有功功率精确分配。其次添加电压恢复机制补偿负载突变带来的电压降落。然后结合有限集模型预测控制,提高系统动态响应速度,并在成本函数中利用电压电流串行评估,消除权重系数配置。最后仿真和实验结果表明,所提策略能够实现有功功率精确分配,补偿了电压降落,实现了逆变器的稳定运行。 展开更多
关键词 并联逆变器 下垂控制 功率均分 模型预测控制 成本函数 权重系数
在线阅读 下载PDF
储能电池双向DC-DC变换器控制策略
10
作者 岳改丽 张哲 +2 位作者 杜光辉 徐振振 姚嘉栋 《电工技术学报》 北大核心 2025年第20期6618-6629,共12页
为了解决三相交错并联双向Buck-Boost变换器各并联模块之间寄生参数不一致,导致各相电感电流不均衡的问题,该文首先提出一种滑模控制-预测控制(SMC-MPC)的均流方法,其中电压外环采用滑模控制,通过建立滑模面进而推导出给定于电流内环的... 为了解决三相交错并联双向Buck-Boost变换器各并联模块之间寄生参数不一致,导致各相电感电流不均衡的问题,该文首先提出一种滑模控制-预测控制(SMC-MPC)的均流方法,其中电压外环采用滑模控制,通过建立滑模面进而推导出给定于电流内环的电感电流参考值表达式,提高系统的鲁棒性及响应速度;其次预测控制应用于电流内环,通过推导变换器在离散状态下的空间方程、构建评价函数,并对占空比表达式的导出作出详细的理论分析,通过占空比补偿的方法实现各相电流的均流控制;最后基于Matlab/Simulink仿真软件搭建仿真平台并制作了一台功率为500 W的实验样机。仿真和实验结果表明,采用SMC-MPC策略,在降低系统超调、提高系统均流精度和鲁棒性等方面相较于传统PI-MPC策略均有显著提升,验证该文所提控制理论的有效性和可行性。 展开更多
关键词 双向Buck-Boost变换器 均流 滑模控制 预测控制 评价函数
在线阅读 下载PDF
电力电子变换器MPC权重系数的ANN设计
11
作者 毕长飞 《机械设计与制造》 北大核心 2025年第9期221-224,共4页
针对电力电子变换器采用有限集模型预测控制(MPC)时,其成本函数中权重系数难以整定的问题,设计了一种基于人工神经网络(ANN)的新型MPC权重系数整定方案。基于仿真平台搭建了变换器电路仿真模型并代入不同权重系数进行测试以获取对应的... 针对电力电子变换器采用有限集模型预测控制(MPC)时,其成本函数中权重系数难以整定的问题,设计了一种基于人工神经网络(ANN)的新型MPC权重系数整定方案。基于仿真平台搭建了变换器电路仿真模型并代入不同权重系数进行测试以获取对应的如总谐波失真等关键性能指标,然后利用这些数据对ANN进行训练,使得ANN具备为任意权重系数组合快速准确估计性能指标的能力。从而,对于任意结合输出指标的用户自定义适应度函数,可快速准确地找到权重系数优化组合。利用不间断电源系统开展了对MPC权重系数设计的ANN方法的实验,实验结果为对于指定的示例性适应度函数,采用AAN设计权重系数后可产生预期的控制性能,并对负载变化具有一定的鲁棒性,同时与仿真模型的误差小于3%,与实测误差小于10%。实验结果验证了所设计的ANN方法整定电力电子变换器MPC权重系数的有效性。 展开更多
关键词 模型预测控制 电力电子变换器 成本函数 权重系数 人工神经网络
在线阅读 下载PDF
基于理想电压矢量位置的永磁同步电机模型预测电流控制
12
作者 程勇 颜宇尧 杜光辉 《电机与控制学报》 北大核心 2025年第4期135-146,共12页
针对永磁同步电机采用传统三矢量模型预测电流控制时存在的运算复杂、延时较高等问题,提出一种基于理想电压矢量位置的模型预测电流控制策略。首先,根据矢量合成和扇区划分原理,在线寻优选择第一最优电压矢量,接着通过引入额外电压矢量... 针对永磁同步电机采用传统三矢量模型预测电流控制时存在的运算复杂、延时较高等问题,提出一种基于理想电压矢量位置的模型预测电流控制策略。首先,根据矢量合成和扇区划分原理,在线寻优选择第一最优电压矢量,接着通过引入额外电压矢量,对原基本电压矢量所在扇区进行细分并结合理想电压矢量位置选择第二最优电压矢量,最后由开关切换次数最少原则确定零矢量。其次,为进一步减小计算量,所选电压矢量的作用时间基于直交轴分量误差最小原则算出。此外,为确保系统控制性能在不同工况下均能保持良好,根据电机的运行状态优化设计了价值函数结构。仿真和实验结果表明,所提算法减少了电压矢量的寻优次数和控制器的计算时间,提高了系统的响应速度和跟踪能力,降低了控制延时,减小了电流和转速脉动,具有良好的动态响应和稳态性能。 展开更多
关键词 永磁同步电机 模型预测电流控制 矢量位置 矢量作用时间 价值函数 响应速度
在线阅读 下载PDF
基于占空比调制的永磁辅助同步磁阻电机模型预测转矩控制
13
作者 许爱德 胡士迈 +1 位作者 刘鑫 李新宇 《电机与控制学报》 北大核心 2025年第5期133-143,共11页
针对永磁辅助同步磁阻电机在传统模型预测转矩控制下转矩脉动较大的问题,提出一种基于占空比调制的模型预测转矩控制方法。采用转矩滞环预筛选的方式将传统模型预测转矩控制中7个基本电压矢量预测个数降低至3个,在转矩、磁链预测环节中... 针对永磁辅助同步磁阻电机在传统模型预测转矩控制下转矩脉动较大的问题,提出一种基于占空比调制的模型预测转矩控制方法。采用转矩滞环预筛选的方式将传统模型预测转矩控制中7个基本电压矢量预测个数降低至3个,在转矩、磁链预测环节中加入反馈补偿进一步提高预测模型的准确性。依据无差拍原理计算出3个不同电压矢量对应的最优占空比。将占空比计算部分置于并联评价函数之前,结合占空比以及反馈补偿后的转矩、磁链预测值代入并联评价函数遴选出最优电压矢量及其对应占空比,通过占空比调制的方式输出最优期望电压矢量。仿真及实验结果表明,所提出的基于占空比调制的模型预测转矩控制方法可以有效抑制电机的转矩脉动,降低定子电流的谐波含量。 展开更多
关键词 永磁辅助同步磁阻电机 模型预测转矩控制 占空比调制 转矩脉动 并联评价函数
在线阅读 下载PDF
开关电感准Z源逆变器无权重系数FCS-MPC策略
14
作者 刘春喜 林枝伟 +1 位作者 刘志乐 徐可 《电机与控制学报》 北大核心 2025年第3期142-154,共13页
针对开关电感准Z源逆变器采用有限集模型预测控制(FCS-MPC)时目标函数权重系数设计复杂的问题,提出一种无权重系数的FCS-MPC算法,避免了繁琐的权重系数调整过程。通过伏秒平衡原理分析电感周期性充放电的机理,在直通状态时对电感电流设... 针对开关电感准Z源逆变器采用有限集模型预测控制(FCS-MPC)时目标函数权重系数设计复杂的问题,提出一种无权重系数的FCS-MPC算法,避免了繁琐的权重系数调整过程。通过伏秒平衡原理分析电感周期性充放电的机理,在直通状态时对电感电流设置一个中间值,根据中间值和预测值的比较来确定下一周期的开关状态,在非直通状态时则采用归一化思想将输出电流和电容电压的目标函数设计为基于动态变化的函数,将误差限制在[0,1]范围内,从而不需要任何权重系数,避免了权重系数的调整过程,最后通过仿真和实验对所提的方法进行验证。结果表明:所提无权重系数FCS-MPC策略与传统FCS-MPC策略相比,在无权重系数的情况下,系统的稳态性能相同,动态性能更优。 展开更多
关键词 开关电感准Z源逆变器 有限集模型预测控制 无权重系数 目标函数 伏秒平衡 归一化
在线阅读 下载PDF
基于深度学习辅助修正的履带车辆路径跟随控制研究
15
作者 路潇然 邹渊 +3 位作者 刘海涛 李春明 张旭东 李云霄 《北京理工大学学报》 北大核心 2025年第8期832-843,共12页
为了提升在城市、厂区等铺面路应用场景下的无人履带平台的路径跟随作业精度,减少差速转向中滑移滑转对车辆行驶路径的影响,提出了一种基于深度学习辅助修正的履带车辆路径跟随控制方法.基于卷积神经网络-径向基函数网络(convolutional ... 为了提升在城市、厂区等铺面路应用场景下的无人履带平台的路径跟随作业精度,减少差速转向中滑移滑转对车辆行驶路径的影响,提出了一种基于深度学习辅助修正的履带车辆路径跟随控制方法.基于卷积神经网络-径向基函数网络(convolutional neural network-radial basis function,CNN-RBF)建立了车辆滑移滑转率识别预测模型,根据车辆在城市道路行驶过程中对滑移滑转率保持均方根误差(root mean square error,RMSE)小于0.101的识别水平,基于线性时变模型预测控制技术(linear time varying-model predictive control,LTV-MPC)建立了车辆路径跟随控制算法,并采用识别预测得到的滑移滑转率进行辅助修正,以提升城市应用场景下履带车辆路径跟随控制精度.Recurdyn-Simulink联合仿真试验结果表明,与无修正的路径跟随控制比较,采用基于深度学习辅助修正的履带车辆路径跟随控制算法对跟随误差平均优化了45.5%、最大优化67%. 展开更多
关键词 卷积神经网络 径向基函数神经网络 滑移滑转率 模型预测控制 履带车辆路径跟随
在线阅读 下载PDF
大型环柱天线卫星姿轨一体化全推进系统设计
16
作者 王诗杰 孙敏哲 +3 位作者 高峰 季奕 孙光辉 董富祥 《振动与冲击》 北大核心 2025年第11期1-11,共11页
大型环柱天线卫星作为地球静止轨道上的关键空间结构,其任务是在该轨道上提供高速信息传输和稳定的通信服务。这要求卫星具备精确的轨道保持和姿态控制能力。由于此类卫星通常具有更大的质量和特殊的结构设计,该研究利用高精度轨道预报... 大型环柱天线卫星作为地球静止轨道上的关键空间结构,其任务是在该轨道上提供高速信息传输和稳定的通信服务。这要求卫星具备精确的轨道保持和姿态控制能力。由于此类卫星通常具有更大的质量和特殊的结构设计,该研究利用高精度轨道预报算法,通过精细建模分析了非球形摄动、太阳光压和三体摄动等关键空间环境因素对此类卫星空间运行的影响规律。进一步地,参考编队飞行重力场测量卫星的设计理念,该研究针对此类卫星提出了基于推力器布局优化的分布式全推力控制策略。在此基础上,还提出了一种基于Laguerre函数的改进显式模型预测控制算法,将设备能力限制和性能需求转化为输入、输出约束,结合多参数二次规划实现了对大型环柱天线卫星的姿轨一体化控制。仿真结果表明:在稳定运行期间,该卫星的位置保持误差可控制在米级范围内,姿态角误差优于0.03°,该控制算法的计算效率显著高于标准模型预测控制算法和基于Laguerre函数的模型预测控制算法,且占用的硬件内存远低于显式模型预测控制算法。通过理论分析和数值验证,该研究为算力有限的星载计算机实现大型环柱天线卫星在复杂空间环境中的全推力器集成控制提供了一种有效解决方案。 展开更多
关键词 大型环柱天线卫星 空间环境 姿轨一体化 模型预测控制 全推力设计 LAGUERRE函数
在线阅读 下载PDF
考虑时域自适应的永磁直驱电机模型预测控制
17
作者 赵金阳 杜钦君 +2 位作者 徐执诏 马炳图 吴育桐 《仪表技术与传感器》 北大核心 2025年第1期112-119,共8页
永磁直驱电机运行时负载变化及电机内部参数变化,导致输出转矩产生波动。为提高伺服系统运动性能,提出了一种改进型连续控制集预测转矩控制方法。根据速度误差判断电机的运行状态,利用自适应函数对电机处于暂态、稳态不同工况下在线调... 永磁直驱电机运行时负载变化及电机内部参数变化,导致输出转矩产生波动。为提高伺服系统运动性能,提出了一种改进型连续控制集预测转矩控制方法。根据速度误差判断电机的运行状态,利用自适应函数对电机处于暂态、稳态不同工况下在线调整预测步数、预测步长以及控制周期,采用增量模型消除磁链对预测控制的影响。针对直驱系统易受外部扰动的影响,设计了具有可变增益的龙伯格观测器,使观测器在电机稳态和暂态时分别采用不同的增益,并超前一步观测负载转矩,提高观测器的观测性能。进行了仿真实验,验证所提方法的有效性。 展开更多
关键词 永磁直驱电机 自适应函数 增量模型 模型预测转矩控制 龙伯格观测器
在线阅读 下载PDF
基于模型预测控制和控制障碍函数的锂电池充电安全控制策略
18
作者 袁婷婷 蔡欣 +1 位作者 任向前 贾港华 《东华大学学报(自然科学版)》 北大核心 2025年第4期174-183,共10页
针对现有充电优化策略无法同时满足用户对充电速度、电池健康性及安全性等多重需求的问题,提出基于模型预测控制(MPC)和控制障碍函数(CBF)的锂电池充电安全控制策略。采用控制障碍函数和控制李雅普诺夫函数(CLF)对充电过程中的关键参数... 针对现有充电优化策略无法同时满足用户对充电速度、电池健康性及安全性等多重需求的问题,提出基于模型预测控制(MPC)和控制障碍函数(CBF)的锂电池充电安全控制策略。采用控制障碍函数和控制李雅普诺夫函数(CLF)对充电过程中的关键参数进行约束从而确保充电过程的安全性和稳定性。将电池的荷电状态和健康状态作为优化策略的关键因素,通过MPC优化方法构建一个综合考虑充电效率、电池健康度及用户需求的充电模型。将整体优化目标根据用户的偏好进行细分,得到快速-健康-均衡的充电策略。经验证,所提策略与传统优化策略相比,强化了安全边界,减少了电流的震荡,充电速度提高22.9%。试验结果表明:利用该方法能够满足用户在不同情境下的充电需求,提供全面的充电选择,提高用户充电的满意度。 展开更多
关键词 模型预测控制 控制障碍函数 电池充电 安全
在线阅读 下载PDF
Multi-Objective optimization for stable and efficient cargo transportation of partial space elevator
19
作者 Gefei Shi Zheng H.Zhu 《Defence Technology(防务技术)》 2025年第2期17-29,共13页
This paper proposed a new libration decoupling analytical speed function(LD-ASF)in lieu of the classic analytical speed function to control the climber's speed along a partial space elevator to improve libration s... This paper proposed a new libration decoupling analytical speed function(LD-ASF)in lieu of the classic analytical speed function to control the climber's speed along a partial space elevator to improve libration stability in cargo transportation.The LD-ASF is further optimized for payload transportation efficiency by a novel coordinate game theory to balance competing control objectives among payload transport speed,stable end body's libration,and overall control input via model predictive control.The transfer period is divided into several sections to reduce computational burden.The validity and efficacy of the proposed LD-ASF and coordinate game-based model predictive control are demonstrated by computer simulation.Numerical results reveal that the optimized LD-ASF results in higher transportation speed,stable end body's libration,lower thrust fuel consumption,and more flexible optimization space than the classic analytical speed function. 展开更多
关键词 Partial space elevator Stable transportation Libration decoupling analytical speed function Coordinate game Model predictive control Pareto optimization
在线阅读 下载PDF
动态环境下移动机器人主动安全控制实验设计
20
作者 冒建亮 孙林 +2 位作者 周昕 夏飞 张传林 《实验室研究与探索》 北大核心 2025年第9期12-16,共5页
针对非结构化动态环境中的移动机器人安全避障任务,基于模型预测控制(MPC)与控制障碍函数(CBF),构建了移动机器人主动安全控制系统。通过机器人操作系统(ROS)搭建了动态避障算法的仿真环境,从障碍物识别与预测、安全控制2个方面进行系... 针对非结构化动态环境中的移动机器人安全避障任务,基于模型预测控制(MPC)与控制障碍函数(CBF),构建了移动机器人主动安全控制系统。通过机器人操作系统(ROS)搭建了动态避障算法的仿真环境,从障碍物识别与预测、安全控制2个方面进行系统设计,从而有效提升动态避障过程中的安全性与可靠性。实验结果表明,所构建的系统能够实现动态障碍物的实时感知与状态估计,并生成安全、优化的避障轨迹。该系统为实验室智能化研究的深入开展提供了有力的技术支撑。 展开更多
关键词 移动机器人 动态避障 模型预测控制 控制障碍函数
在线阅读 下载PDF
上一页 1 2 21 下一页 到第
使用帮助 返回顶部