A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the im...A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the immerged Long-big tunnel in Jinping Cascade II Hydropower Station under uniaxial compression was recorded by using the testing scheme. According to the stereology theory, the propagation and coalescent of cracks at meso-scale were quantitatively investigated with digital technology. Therefore, the basic geometric information of rock microcracks such as area, angle, length, width, perimeter, was obtained from binary images after segmentation. The failure mechanism of specimen under uniaxial compression with the quantitative information was studied from macro and microscopic point of view. The results show that the image of microfracturing process of the specimen can be observed and recorded digitally. During the damage of the specimen, the distribution of microcracks in the specimen is still subjected to exponential distribution with some microcracks concentrated in certain regions. Finally, the change law of the fractal dimension of the local element in marble sample under different external load conditions is obtained by means of the statistical calculation of the fractal dimension.展开更多
The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of tal...The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.展开更多
The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although vari...The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.展开更多
This paper proposed a method to automatically generate the trimap for digital matting. Camera parameters of aperture and shutter speed are used to control its exposure, and accordingly to take pictures of stationary f...This paper proposed a method to automatically generate the trimap for digital matting. Camera parameters of aperture and shutter speed are used to control its exposure, and accordingly to take pictures of stationary foreground with blurred background. Our method was inspired by color difference matting, both of which require a pre-record background image. In our method, only one image was required. Upon this input image, the process of blurring-deblurring, subtraction, thresholding and dilation were applied to finally generate the trimap. No user＇ s direct interface with the image was needed, and the user only needed to adjust the threshold or width of dilation for some input images. It reduces users＇ conservative interaction, and results are reliable for most of the pictures.展开更多
Three-dimensional (3-D) matched filtering has been suggested as a powerful processing technique for detecting weak, moving IR point target immersed in a noisy field. Based on the theory of the 3-D matched filtering an...Three-dimensional (3-D) matched filtering has been suggested as a powerful processing technique for detecting weak, moving IR point target immersed in a noisy field. Based on the theory of the 3-D matched filtering and the optimal linear processing, the optimal point target detector is being analyzed in this paper. The performance of the detector is introduced in detail. The results provide a standard reference to evaluate the performance of any other point target detection algorithms.展开更多
为实现星载数字时间延迟积分(Digital Time Integration Delay,DTDI)系统的有效设计与成像质量分析,文章提出星载DTDI系统全链路成像质量影响因素分析方法。首先,分析了技术的原理和影响因素,在此基础上构建了场景-大气-星载系统-处理...为实现星载数字时间延迟积分(Digital Time Integration Delay,DTDI)系统的有效设计与成像质量分析,文章提出星载DTDI系统全链路成像质量影响因素分析方法。首先,分析了技术的原理和影响因素,在此基础上构建了场景-大气-星载系统-处理的全链路DTDI成像系统仿真模型,开展了多要素影响下的DTDI成像仿真试验与分析评价。结果表明:0.9 m分辨率下,积分时间0.063 ms、量化位数12 bit、TDI级数6级可以获得较好的成像质量,利用DTDI技术可将平台稳定度要求降至0.1(°)/s。文章研究成果可为星载DTDI系统设计分析提供参考。展开更多
频率响应分析法(frequency response analysis,FRA)是一种有效检测变压器内部绕组变形故障的方法。然而,在传统的FRA法中,通常仅使用幅值响应来解释FRA特征,而相位响应的重要性尚未得到充分重视。针对以上问题,该文提出一种基于频响重...频率响应分析法(frequency response analysis,FRA)是一种有效检测变压器内部绕组变形故障的方法。然而,在传统的FRA法中,通常仅使用幅值响应来解释FRA特征,而相位响应的重要性尚未得到充分重视。针对以上问题,该文提出一种基于频响重构和数字图像处理的变压器绕组变形故障诊断方法。该方法首先将频率、幅值和相位元素融合在一个三维坐标图中,并应用图像处理技术进行纹理分析特征提取。随后,利用图像平方和比误差(image sum square ratio error,ISSRE)的三角坐标统计图实现了故障类型分类,并总结了绕组故障类型判别的参数化阈值指标。然后,基于极坐标频率响应特性,提出了能够识别绕组故障程度的定量化指标图像平方和最大-最小比误差(image sum square max-min ratio error,ISSMMRE)。最后,在1台定制电力变压器上进行了各种故障的实验验证,证明了该方法的有效性和可行性,为FRA方法的改进和自动化提供了新的思路和方法。展开更多
基金Projects(50674040, 50539090) supported by the National Natural Science Foundation of ChinaProject(CX07B_128z) supported by the Cultivate Creative Postgraduate Foundation of Jiangsu Province, China
文摘A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the immerged Long-big tunnel in Jinping Cascade II Hydropower Station under uniaxial compression was recorded by using the testing scheme. According to the stereology theory, the propagation and coalescent of cracks at meso-scale were quantitatively investigated with digital technology. Therefore, the basic geometric information of rock microcracks such as area, angle, length, width, perimeter, was obtained from binary images after segmentation. The failure mechanism of specimen under uniaxial compression with the quantitative information was studied from macro and microscopic point of view. The results show that the image of microfracturing process of the specimen can be observed and recorded digitally. During the damage of the specimen, the distribution of microcracks in the specimen is still subjected to exponential distribution with some microcracks concentrated in certain regions. Finally, the change law of the fractal dimension of the local element in marble sample under different external load conditions is obtained by means of the statistical calculation of the fractal dimension.
基金Project(2013BAB06B00) supported by the National Key Technology R&D Programof ChinaProject(2011CB013504) supported by the National Basic Research Program of ChinaProject(50911130366) supported by the National Natural Science Foundation of China
文摘The macro mechanical properties of materials with characteristics of large scale and complicated structural composition can be analyzed through its reconstructed meso-structures.In this work,the meso-structures of talus deposits that widely exist in the hydro-power engineering in the southwest of China were first reconstructed by small particles according to the in-situ photographs based on the self-adaptive PCNN digital image processing,and then numerical direct shear tests were carried out for studying the mechanical properties of talus deposits.Results indicate that the reconstructed meso-structures of talus deposits are more consistent with the actual situation because the self-adaptive PCNN digital image processing has a higher discrimination in the details of soil-rock segmentation.The existence and random distribution of rock blocks make the initial shear stiffness,the peak strength and the residual strength higher than those of the "pure soil" with particle size less than 1.25 cm apparently,but reduce the displacements required for the talus deposits reaching its peak shear strength.The increase of rock proportion causes a significant improvement in the internal friction angle of talus deposit,which to a certain degree leads to the characteristics of shear stress-displacement curves having a changing trend from the plastic strain softening deformation to the nonlinear strain hardening deformation,while an unconspicuous increase in cohesion.The uncertainty and heterogeneity of rock distributions cause the differences of rock proportion within shear zone,leading to a relatively strong fluctuation in peak strengths during the shear process,while movement features of rock blocks,such as translation,rotation and crossing,expand the scope of shear zone,increase the required shear force,and also directly lead to the misjudgment that the lower shear strength is obtained from the samples with high rock proportion.That,however,just explains the reason why the shear strength gained from a small amount of indoor test data is not consistent with engineering practice.
基金Project(2021YFF0500200) supported by the National Key R&D Program of ChinaProject(52105437) supported by the National Natural Science Foundation of China+1 种基金Project(202006120184) supported by the Heilongjiang Provincial Postdoctoral Science Foundation,ChinaProject(LBH-Z20054) supported by the China Scholarship Council。
文摘The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.
基金Supported by the National Key Techenology Innovation Program of China under Grant(02BK-029)National Natural Science Foundation of China Under Grant(60105002)
文摘This paper proposed a method to automatically generate the trimap for digital matting. Camera parameters of aperture and shutter speed are used to control its exposure, and accordingly to take pictures of stationary foreground with blurred background. Our method was inspired by color difference matting, both of which require a pre-record background image. In our method, only one image was required. Upon this input image, the process of blurring-deblurring, subtraction, thresholding and dilation were applied to finally generate the trimap. No user＇ s direct interface with the image was needed, and the user only needed to adjust the threshold or width of dilation for some input images. It reduces users＇ conservative interaction, and results are reliable for most of the pictures.
文摘Three-dimensional (3-D) matched filtering has been suggested as a powerful processing technique for detecting weak, moving IR point target immersed in a noisy field. Based on the theory of the 3-D matched filtering and the optimal linear processing, the optimal point target detector is being analyzed in this paper. The performance of the detector is introduced in detail. The results provide a standard reference to evaluate the performance of any other point target detection algorithms.
文摘频率响应分析法(frequency response analysis,FRA)是一种有效检测变压器内部绕组变形故障的方法。然而,在传统的FRA法中,通常仅使用幅值响应来解释FRA特征,而相位响应的重要性尚未得到充分重视。针对以上问题,该文提出一种基于频响重构和数字图像处理的变压器绕组变形故障诊断方法。该方法首先将频率、幅值和相位元素融合在一个三维坐标图中,并应用图像处理技术进行纹理分析特征提取。随后,利用图像平方和比误差(image sum square ratio error,ISSRE)的三角坐标统计图实现了故障类型分类,并总结了绕组故障类型判别的参数化阈值指标。然后,基于极坐标频率响应特性,提出了能够识别绕组故障程度的定量化指标图像平方和最大-最小比误差(image sum square max-min ratio error,ISSMMRE)。最后,在1台定制电力变压器上进行了各种故障的实验验证,证明了该方法的有效性和可行性,为FRA方法的改进和自动化提供了新的思路和方法。
