In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from th...In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from the jet tip to tail.The density of jet tip is approximately 1.5 g/cm3,which is lower than that of the reactive liner materials.The X-ray experiments show similar results with the simulations.The density decreasing effect of jet tip has a significant influence on the penetration behavior when the reactive jet impacts steel plate.According to the simulation results,this paper assumes that the density gradient in the jet section has linear distribution.Then,the deflagration pressure generated by each jet element at the bottom of crater is introduced into the Bernoulli equation.Based on the virtual origin model and Szendrei-Held equation,the analytical models for penetration depth and radial cratering of reactive jet with the density reduction are obtained.Moreover,to further prove the validity of analytical models,the penetration experiments of the reactive liner shaped charge against steel plate under different standoffs are carried out.There is a convergence between the analytical crater profiles and experimental results when reactive jets penetrate steel plates under different standoffs,especially at standoff of 1.5 and 2.0charge diameters.展开更多
The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although vari...The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.展开更多
The influences of the mask wall angle on the current density distribution,shape of the evolving cavity and machining accuracy were investigated in electrochemical machining(ECM) by mask.A mathematical model was develo...The influences of the mask wall angle on the current density distribution,shape of the evolving cavity and machining accuracy were investigated in electrochemical machining(ECM) by mask.A mathematical model was developed to predict the shape evolution during the ECM by mask.The current density distribution is sensitive to mask wall angle.The evolution of cavity is determined by the current density distribution of evolving workpiece surface.The maximum depth is away from the center of holes machined,which leads to the island appearing at the center of cavity for mask wall angles greater than or equal to 90°(β≥90°).The experimental system was established and the simulation results were experimentally verified.The results indicate that the simulation results of cavity shape are consistent with the actual ones.The experiments also show that the repetition accuracy of matrix-hole for β≥90° is higher than that for β<90°.A hole taper is diminished,and the machining accuracy is improved with the mask wall angle increasing.展开更多
The thermal behavior,non-isothermal thermal decomposition reaction kinetics and specific heat capacity of hexanitro-hexaazaisowurtzitane(HNIW)were studied by differential scanning calorimeter(DSC)and Micro-DSCIapparat...The thermal behavior,non-isothermal thermal decomposition reaction kinetics and specific heat capacity of hexanitro-hexaazaisowurtzitane(HNIW)were studied by differential scanning calorimeter(DSC)and Micro-DSCIapparatus,The kinetic parameters of the thermal decomposition reaction(the apparent activation energy(E,)and pre-exponential factor(A))were calcu-lated by non-isothermal DSC curves.The results show that the differential mlechanism function and values of E,and A of the ther-mal decomposition reaction of HNIW are 3(1-a)[-ln(1-a)]"·,155.04 kJ·mol^(-1)and 10""s^(-1),respectively.The critical tem-perature of thermal explosion of the title compound is 226.60℃.The entropy of activation(AS·),enthalpy of activation(AH·)and free energy of activation(AG·)of this reaction are 11.60J·mol·K^(-1),152.04 kJ·mol^(-1)and 146.29 kJ·mol^(-1),respec-tively.The equation of specific heat capacity of HNIW with temperature is C,=0.2472+0.002705992Tin the temperature range of 283 K to 343K.The values of self-accelerating decomposition temperature,adiabatic time-to-maximum decomposition rate and adiabatic time-to-explosion are 486.5K,54.81s and 54.31s,respectively.Thermal sensitivity probability density distribution curve of HNIW is constructed.展开更多
In order to reduce the partial derivative errors in Preisach hysteresis model caused by inaccurate experimental data,the concept and correlative method of discretization of Preisach hysteresis model are proposed,the e...In order to reduce the partial derivative errors in Preisach hysteresis model caused by inaccurate experimental data,the concept and correlative method of discretization of Preisach hysteresis model are proposed,the essential of which is to centralize the distribution density of Preisach hysteresis model in local region as an integral,which is defined as the weight of a certain point in that region.For the input composed of an ascending segment and a descending segment,a method to determine the initial weights together with an additional method to determine present weights is given according to the number of input ascending segments.If the number of input ascending segments increases,the weights of the corresponding points in updating rectangle are updated by adding the initial weights of corresponding points.A prominent advantage of discrete Preisach hysteresis model is its memory efficiency.Another advantage of discrete Preisach hysteresis model is that there is no function in the model,and thus,it can be expediently operated using a computer.By generalizing the above updating rectangle method to the continuous Preisach hysteresis model,identification method of distribution density can be given as well.展开更多
基金supported by the National Natural Science Foundation of China(No.12002046)the China Postdoctoral Science Foundation(No.2020M680392)。
文摘In this paper,the penetration mechanism of reactive jet with non-uniform density distribution is studied.The simulations show that the density deficit occurs in the whole reactive jet,and the density increases from the jet tip to tail.The density of jet tip is approximately 1.5 g/cm3,which is lower than that of the reactive liner materials.The X-ray experiments show similar results with the simulations.The density decreasing effect of jet tip has a significant influence on the penetration behavior when the reactive jet impacts steel plate.According to the simulation results,this paper assumes that the density gradient in the jet section has linear distribution.Then,the deflagration pressure generated by each jet element at the bottom of crater is introduced into the Bernoulli equation.Based on the virtual origin model and Szendrei-Held equation,the analytical models for penetration depth and radial cratering of reactive jet with the density reduction are obtained.Moreover,to further prove the validity of analytical models,the penetration experiments of the reactive liner shaped charge against steel plate under different standoffs are carried out.There is a convergence between the analytical crater profiles and experimental results when reactive jets penetrate steel plates under different standoffs,especially at standoff of 1.5 and 2.0charge diameters.
基金Project(2021YFF0500200) supported by the National Key R&D Program of ChinaProject(52105437) supported by the National Natural Science Foundation of China+1 种基金Project(202006120184) supported by the Heilongjiang Provincial Postdoctoral Science Foundation,ChinaProject(LBH-Z20054) supported by the China Scholarship Council。
文摘The model of heat source(MHS) which reflects the thermal interaction between materials and laser during processing determines the accuracy of simulation results. To acquire desirable simulations results, although various modifications of heat sources in the aspect of absorption process of laser by materials have been purposed, the distribution of laser power density(DLPD) in MHS is still modeled theoretically. However, in the actual situations of laser processing, the DLPD is definitely different from the ideal models. So, it is indispensable to build MHS using actual DLPD to improve the accuracy of simulation results. Besides, an automatic modeling method will be benefit to simplify the tedious pre-processing of simulations. This paper presents a modeling method and corresponding algorithm to model heat source using measured DLPD. This algorithm automatically processes original data to get modeling parameters and provides a step MHS combining with absorption models. Simulations and experiments of heat transfer in steel plates irradiated by laser prove the mothed and the step MHS. Moreover, the investigations of laser induced thermal-crack propagation in glass highlight the signification of modeling heat source based on actual DLPD and demonstrate the enormous application of this method in the simulation of laser processing.
基金Project(50635040) supported by the National Natural Science Foundation of ChinaProject(2009AA044205) supported by the National High Technology Research and Development ProgramProject(BK2008043) supported by the Jiangsu Provincial Natural Science Foundation,China
文摘The influences of the mask wall angle on the current density distribution,shape of the evolving cavity and machining accuracy were investigated in electrochemical machining(ECM) by mask.A mathematical model was developed to predict the shape evolution during the ECM by mask.The current density distribution is sensitive to mask wall angle.The evolution of cavity is determined by the current density distribution of evolving workpiece surface.The maximum depth is away from the center of holes machined,which leads to the island appearing at the center of cavity for mask wall angles greater than or equal to 90°(β≥90°).The experimental system was established and the simulation results were experimentally verified.The results indicate that the simulation results of cavity shape are consistent with the actual ones.The experiments also show that the repetition accuracy of matrix-hole for β≥90° is higher than that for β<90°.A hole taper is diminished,and the machining accuracy is improved with the mask wall angle increasing.
基金The National Nature Science Foundation of China(21173163)
文摘The thermal behavior,non-isothermal thermal decomposition reaction kinetics and specific heat capacity of hexanitro-hexaazaisowurtzitane(HNIW)were studied by differential scanning calorimeter(DSC)and Micro-DSCIapparatus,The kinetic parameters of the thermal decomposition reaction(the apparent activation energy(E,)and pre-exponential factor(A))were calcu-lated by non-isothermal DSC curves.The results show that the differential mlechanism function and values of E,and A of the ther-mal decomposition reaction of HNIW are 3(1-a)[-ln(1-a)]"·,155.04 kJ·mol^(-1)and 10""s^(-1),respectively.The critical tem-perature of thermal explosion of the title compound is 226.60℃.The entropy of activation(AS·),enthalpy of activation(AH·)and free energy of activation(AG·)of this reaction are 11.60J·mol·K^(-1),152.04 kJ·mol^(-1)and 146.29 kJ·mol^(-1),respec-tively.The equation of specific heat capacity of HNIW with temperature is C,=0.2472+0.002705992Tin the temperature range of 283 K to 343K.The values of self-accelerating decomposition temperature,adiabatic time-to-maximum decomposition rate and adiabatic time-to-explosion are 486.5K,54.81s and 54.31s,respectively.Thermal sensitivity probability density distribution curve of HNIW is constructed.
基金Project(2013CB733000)supported by the National Basic Research Program of China
文摘In order to reduce the partial derivative errors in Preisach hysteresis model caused by inaccurate experimental data,the concept and correlative method of discretization of Preisach hysteresis model are proposed,the essential of which is to centralize the distribution density of Preisach hysteresis model in local region as an integral,which is defined as the weight of a certain point in that region.For the input composed of an ascending segment and a descending segment,a method to determine the initial weights together with an additional method to determine present weights is given according to the number of input ascending segments.If the number of input ascending segments increases,the weights of the corresponding points in updating rectangle are updated by adding the initial weights of corresponding points.A prominent advantage of discrete Preisach hysteresis model is its memory efficiency.Another advantage of discrete Preisach hysteresis model is that there is no function in the model,and thus,it can be expediently operated using a computer.By generalizing the above updating rectangle method to the continuous Preisach hysteresis model,identification method of distribution density can be given as well.
