The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-n...The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.展开更多
Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrat...Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.展开更多
In the view of the comparison of Mass Customization ( MC) with Mass Production and Customization Production, the objectives of MC are analyzed. It is pointed out that the core objectives of MC are to realize in dividu...In the view of the comparison of Mass Customization ( MC) with Mass Production and Customization Production, the objectives of MC are analyzed. It is pointed out that the core objectives of MC are to realize in dividuation customization, low cost, quick response to market demands. The modul arization theory is simply introduced. Based on the characteristics of modular ization, the mechanism of realizing MC with modularization is analyzed. The in dividuation customization can be realized with the different combinations of mod ules. The low cost can be realized with the scale economy and the category econo my of modules. The quick response can be realized with standard modules and its interfaces. So, the modularization is a kind of effective method in realizing MC . The modularization for MC is a systems engineering. With product modularized, production organization and management and manufacturing equipment will be chang ed. In addition, the paper also proposes a Mass Customization production model w hich is based on modularization. This Mass Customization production model is con sisted of modularization of product design, specialization of manufacturing, Vir tual Enterprises based on modularizing enterprises, and modularizing manufacturi ng equipment. The module design for MC, modularizing enterprises, and reconfigur able automation manufacturing equipment are discussed, and it is pointed out tha t they are the important supports for MC.展开更多
It is necessary to investigate the characteristics of Mesenchymal stem cells(MSCs)derived exosomes,and especially their application in tissue regeneration.Previous studies have shown that inflammatory stimulation enha...It is necessary to investigate the characteristics of Mesenchymal stem cells(MSCs)derived exosomes,and especially their application in tissue regeneration.Previous studies have shown that inflammatory stimulation enhanced the secretion of MSC-derived exosomes with stronger anti-inflammatory protein,cytokine profiles,and functional RNA via altering COX2/PGE2 pathway.Recently,accumulating evidence has also revealed that biophysical cues(especially biomechanical cues)in cell microenvironment have significant effects not only on cells but also on their exosomes.It has been reported that applying bi-axial strain to MSCs induces formation of a stiffer cytoskeleton through mTORC2 signaling,which biases against adipogenic differentiation and toward osteoblastogenesis.At the same time,For example,dimensionality,composition and stiffness of the extracellular matrix(ECM)has been proved to affect the size and composition of exosomes secreted by cancer cells.However,the effects of biomechanical cues in the three-dimensional(3D)microenvironment on stem cell-derived exosomes remains to be unveiled.Therefore,it is important to understand the roles of 3D cell mechanical microenvironment in regulating the characteristics of stem cell-derived exosomes and develop more efficient approaches to enhance their functions.This study aimed to explore the changes in characteristics of exosomes secreted by MSCs in periodontium in response to the matrix strain in 3D.Periodontal ligament stem cells(PDLSCs)were cultured in a 3D strain microenvironment engineered with microscale magnetically stretched collagen hydrogels.The morphology,particle distribution,marker protein expression of PDLSC-derived exosomes were analyzed.Then the pro-osteogenic property of exosomes was evaluated by assessing cell viability,proliferation,migration and osteogenic differentiation of target cells,for instance human bone marrow mesenchymal stem cells(hBMSCs).Detailed characterizations revealed that PDLSC-derived exosomes in the 3D strain mi-croenvironment were with similar morphology,particle distribution and surface markers.Notably,Exosomes secreted by PDLSCs in strain microenvironment were more endocytosed by hBMSCs and were more potent in improving proliferation and migration of hBMSCs,comparing with PDLSCs in non-strain environment.Alizarin red staining and molecular biology experiments confirmed that treatment of exosomes secreted by PDLSCs under mechanical stimulation led to a significant increase in osteogenic differentiation of hBMSCs in vitro.Meanwhile,in vivo study also indicated that PDLSC-derived exosomes obtained from the 3D strain microenvironment could obviously promote new bone formation.Our findings revealed that mechanical cues profoundly affected the characteristics of PDLSC-derived exosomes,especially for their bio-activity,providing a foundation for using the 3D mechanical microenvironment to enhance the osteo-inductive functions of stem cell-derived exosomes in cell-free therapy for bone regeneration.展开更多
A 3D temperature field distribution of biological tissue for superficial hyperthermia using a pulse modulated microwave （PMMW） was presented. A 3D sliced homogeneous phantom was radiated by the PMMW and an infrared ...A 3D temperature field distribution of biological tissue for superficial hyperthermia using a pulse modulated microwave （PMMW） was presented. A 3D sliced homogeneous phantom was radiated by the PMMW and an infrared thermal imager was applied to image temperature distribution throughout the phantom. The period of the PMMW is 3 s and the output power is 35 W. The temperature rises by at least 3 ℃ in the phantom when the duty cycle varies from 1/3, 1/2, 2/3 to 1 （denoted by scenarios 1-4）. Both the accumulative temperature-volume histogram and the relative depth-area ratio histogram show that the maximum temperature rise （MTR） is 6.6 and 8 ℃ in scenarios 2 and 3, and they are superior to scenarios 1 and 4. Furthermore, the PMMW can control temperature field distribution of biological tissue. It provides both preliminary basis for thermal volume control and new technology for temperature control and monitor in superficial hyperthermia.展开更多
基金National Natural Science Foundation of China under Grant No.61973037China Postdoctoral Science Foundation 2022M720419 to provide fund for conducting experiments。
文摘The identification of intercepted radio fuze modulation types is a prerequisite for decision-making in interference systems.However,the electromagnetic environment of modern battlefields is complex,and the signal-to-noise ratio(SNR)of such environments is usually low,which makes it difficult to implement accurate recognition of radio fuzes.To solve the above problem,a radio fuze automatic modulation recognition(AMR)method for low-SNR environments is proposed.First,an adaptive denoising algorithm based on data rearrangement and the two-dimensional(2D)fast Fourier transform(FFT)(DR2D)is used to reduce the noise of the intercepted radio fuze intermediate frequency(IF)signal.Then,the textural features of the denoised IF signal rearranged data matrix are extracted from the statistical indicator vectors of gray-level cooccurrence matrices(GLCMs),and support vector machines(SVMs)are used for classification.The DR2D-based adaptive denoising algorithm achieves an average correlation coefficient of more than 0.76 for ten fuze types under SNRs of-10 d B and above,which is higher than that of other typical algorithms.The trained SVM classification model achieves an average recognition accuracy of more than 96%on seven modulation types and recognition accuracies of more than 94%on each modulation type under SNRs of-12 d B and above,which represents a good AMR performance of radio fuzes under low SNRs.
基金the National Key R&D Program of China(2022YFA1505200)the National Natural Science Foundation of China(22472140,22021001)the Fundamental Research Funds for the Central Universities(20720210017 and 20720210009)。
文摘Large-area two-dimensional(2D)materials,such as graphene,MoS_(2),WS_(2),h-BN,black phosphorus,and MXenes,are a class of advanced materials with many possible applications.Different applications need different substrates,and each substrate may need a different way of transferring the 2D material onto it.Problems such as local stress concentrations,an uneven surface tension,inconsistent adhesion,mechanical damage and contamination during the transfer can adversely affect the quality and properties of the transferred material.Therefore,how to improve the integrity,flatness and cleanness of large area 2D materials is a challenge.In order to achieve high-quality transfer,the main concern is to control the interface adhesion between the substrate,the 2D material and the transfer medium.This review focuses on this topic,and finally,in order to promote the industrial use of large area 2D materials,provides a recipe for this transfer process based on the requirements of the application,and points out the current problems and directions for future development.
文摘In the view of the comparison of Mass Customization ( MC) with Mass Production and Customization Production, the objectives of MC are analyzed. It is pointed out that the core objectives of MC are to realize in dividuation customization, low cost, quick response to market demands. The modul arization theory is simply introduced. Based on the characteristics of modular ization, the mechanism of realizing MC with modularization is analyzed. The in dividuation customization can be realized with the different combinations of mod ules. The low cost can be realized with the scale economy and the category econo my of modules. The quick response can be realized with standard modules and its interfaces. So, the modularization is a kind of effective method in realizing MC . The modularization for MC is a systems engineering. With product modularized, production organization and management and manufacturing equipment will be chang ed. In addition, the paper also proposes a Mass Customization production model w hich is based on modularization. This Mass Customization production model is con sisted of modularization of product design, specialization of manufacturing, Vir tual Enterprises based on modularizing enterprises, and modularizing manufacturi ng equipment. The module design for MC, modularizing enterprises, and reconfigur able automation manufacturing equipment are discussed, and it is pointed out tha t they are the important supports for MC.
基金financially supported by the Young Elite Scientist Sponsorship Program by CAST ( 2018QNRC001)the China Postdoctoral Science Foundation ( 2018M631172)
文摘It is necessary to investigate the characteristics of Mesenchymal stem cells(MSCs)derived exosomes,and especially their application in tissue regeneration.Previous studies have shown that inflammatory stimulation enhanced the secretion of MSC-derived exosomes with stronger anti-inflammatory protein,cytokine profiles,and functional RNA via altering COX2/PGE2 pathway.Recently,accumulating evidence has also revealed that biophysical cues(especially biomechanical cues)in cell microenvironment have significant effects not only on cells but also on their exosomes.It has been reported that applying bi-axial strain to MSCs induces formation of a stiffer cytoskeleton through mTORC2 signaling,which biases against adipogenic differentiation and toward osteoblastogenesis.At the same time,For example,dimensionality,composition and stiffness of the extracellular matrix(ECM)has been proved to affect the size and composition of exosomes secreted by cancer cells.However,the effects of biomechanical cues in the three-dimensional(3D)microenvironment on stem cell-derived exosomes remains to be unveiled.Therefore,it is important to understand the roles of 3D cell mechanical microenvironment in regulating the characteristics of stem cell-derived exosomes and develop more efficient approaches to enhance their functions.This study aimed to explore the changes in characteristics of exosomes secreted by MSCs in periodontium in response to the matrix strain in 3D.Periodontal ligament stem cells(PDLSCs)were cultured in a 3D strain microenvironment engineered with microscale magnetically stretched collagen hydrogels.The morphology,particle distribution,marker protein expression of PDLSC-derived exosomes were analyzed.Then the pro-osteogenic property of exosomes was evaluated by assessing cell viability,proliferation,migration and osteogenic differentiation of target cells,for instance human bone marrow mesenchymal stem cells(hBMSCs).Detailed characterizations revealed that PDLSC-derived exosomes in the 3D strain mi-croenvironment were with similar morphology,particle distribution and surface markers.Notably,Exosomes secreted by PDLSCs in strain microenvironment were more endocytosed by hBMSCs and were more potent in improving proliferation and migration of hBMSCs,comparing with PDLSCs in non-strain environment.Alizarin red staining and molecular biology experiments confirmed that treatment of exosomes secreted by PDLSCs under mechanical stimulation led to a significant increase in osteogenic differentiation of hBMSCs in vitro.Meanwhile,in vivo study also indicated that PDLSC-derived exosomes obtained from the 3D strain microenvironment could obviously promote new bone formation.Our findings revealed that mechanical cues profoundly affected the characteristics of PDLSC-derived exosomes,especially for their bio-activity,providing a foundation for using the 3D mechanical microenvironment to enhance the osteo-inductive functions of stem cell-derived exosomes in cell-free therapy for bone regeneration.
基金Project(50977064) supported by the National Natural Science Foundation of China
文摘A 3D temperature field distribution of biological tissue for superficial hyperthermia using a pulse modulated microwave （PMMW） was presented. A 3D sliced homogeneous phantom was radiated by the PMMW and an infrared thermal imager was applied to image temperature distribution throughout the phantom. The period of the PMMW is 3 s and the output power is 35 W. The temperature rises by at least 3 ℃ in the phantom when the duty cycle varies from 1/3, 1/2, 2/3 to 1 （denoted by scenarios 1-4）. Both the accumulative temperature-volume histogram and the relative depth-area ratio histogram show that the maximum temperature rise （MTR） is 6.6 and 8 ℃ in scenarios 2 and 3, and they are superior to scenarios 1 and 4. Furthermore, the PMMW can control temperature field distribution of biological tissue. It provides both preliminary basis for thermal volume control and new technology for temperature control and monitor in superficial hyperthermia.
