In this work,the results of plasma microwave transmission diagnosis were analyzed.According to the attenuation and phase shift of the electromagnetic wave propagating in the plasma,the electron density and collision f...In this work,the results of plasma microwave transmission diagnosis were analyzed.According to the attenuation and phase shift of the electromagnetic wave propagating in the plasma,the electron density and collision frequency of the plasma can be diagnosed.Since part of the electromagnetic wave is reflected or diffracted when propagating in the plasma,and is not absorbed by the plasma,and this part of the attenuation is still included in the measured attenuation,the attenuation is distorted.Therefore,a curve fitting method is proposed to remove the attenuation caused by the plasma reflection,thereby improving the accuracy of the diagnosis of the collision frequency.The calibration effect of this method on plasmas with different electron densities and collision frequencies is analyzed,and a diagnostic frequency band with good calibration results is given.The curve fitting method is verified by experiment and simulation.After adopting the newly proposed method,the diagnosis accuracy of collision frequency can be increased by 30%.This method can be widely used in various types of plasma diagnosis and provides a new idea for plasma diagnosis.展开更多
Sinusoid curve fit is a very useful method in precise measurement, based on the modeling measurement. There are many valuable uses. But, what′s the specifications of the sinusoid curve fit software, and how to eval...Sinusoid curve fit is a very useful method in precise measurement, based on the modeling measurement. There are many valuable uses. But, what′s the specifications of the sinusoid curve fit software, and how to evaluate the uncertainty of it are still unknown yet, because they involve manifold factors and are complicated. Every one using the sinusoid curve fit software wants to know it. In this paper, the basic process and the uses of sinusoid curve fit are described, and some specifications and evaluation methods are introduced. One evaluation example of sinusoid curve fit software is discussed, the results and the specification are good.展开更多
Existing curve fitting algorithms of NC machining path mainly focus on the control of fitting error,but ignore the problem that the original discrete cutter position points are not enough in the high curvature area of...Existing curve fitting algorithms of NC machining path mainly focus on the control of fitting error,but ignore the problem that the original discrete cutter position points are not enough in the high curvature area of the tool path.It may cause a sudden change in the drive force of the feed axis,resulting in a large fluctuation in the feed speed.This paper proposes a new non-uniform rational B-spline(NURBS)curve fitting optimization method based on curvature smoothing preset point constraints.First,the short line segments generated by the CAM software are optimally divided into different segment regions,and then the curvature of the short line segments in each region is adjusted to make it smoother.Secondly,a set of characteristic points reflecting the change of the curvature of the fitted curve is constructed as the control apex of the fitted curve,and the curve is fitted using the NURBS curve fitting optimization method based on the curvature smoothing preset point constraint.Finally,the curve fitting error and curve volatility are analyzed with an example,which verifies that the method can significantly improve the curvature smoothness of the high-curvature tool path,reduce the fitting error,and improve the feed speed.展开更多
The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse moti...The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse motion of the object cannot change the one-order phase of the echo, but the high-order phase. The high-order Doppler effect of the transverse moving target is presented and a new algorithm for obtaining the transverse velocity is given. The scalar velocity of a target moving steadily in any direction can be calculated with one-order and two-order items of the echo phase. The calculating method and simulating results are given. As the transverse speed is 900 km/h, the speed calculation error is less than 0. 06% if SNR of echo signal is higher than 0 dB.展开更多
Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estim...Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.展开更多
A self-sensing test method for the temperature of piezoelectric stack,based on the high correlation between the static capacitance and the stack temperature,is proposed in order to construct a self-sufficient methodol...A self-sensing test method for the temperature of piezoelectric stack,based on the high correlation between the static capacitance and the stack temperature,is proposed in order to construct a self-sufficient methodology of temperature measurement. Firstly,a theoretical model of static capacitance of the piezoelectric stack under preload was set up,and the influence of preload on the static capacitance was analyzed. Secondly,the correctness of the model was verified by static capacitance test experiments under various preloading conditions. Finally, the temperature measurement experiments at low-temperature stage for two kinds of piezoelectric stacks,namely the lowtemperature-resistant piezoelectric stack and conventional piezoelectric stack, were conducted under various preloading conditions using a polynomial fitting method. The results,which validate the accuracy of the test method,show that the maximum temperature deviations of the two kinds of piezoelectric stack are 3.9 ℃ and 2.8 ℃,respectively,when the preload force is close to the specified value. The test method uses the piezoelectric stack itself as a temperature sensor,which does not require additional equipment for temperature sensing,so that the space and equipment cost could be economized. And the test for static capacitance is concise and convenient,which indicates that in the cooling process,a concise and efficient test of the temperature of the piezoelectric stack could be realized so as to grasp the current temperature change in time.展开更多
In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides ...In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides in diesel were explored. Through studying the mechanism for oxidation of sulfides and the principle of solvent extraction,the kinetic equation of desulfurization via oxidative extraction were determined. By means of the evaluation of model parameters and curve fitting,the reaction order between organic sulfide and sulfone,the intrinsic oxidation rate constant of organic sulfide and sulfone,and the equilibrium constant between sulfone in model diesel and extractive solvent were determined. The experimental values of the desulfurization rate and the theoretical values of the corresponding model equation had closely demonstrated that the desulfurization reaction rate had high accuracy. And the reaction kinetics could provide an important basis for diesel desulfurization process in the future.展开更多
As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact...As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact of the scattering effect on latency and bandwidth, this paper first presents the quality-factor model which optimises latency and bandwidth effectively with the consideration of the scattering effect. Then we obtain the analytical model of line width and spacing with application of curve-fitting method. The proposed model has been verified and compared based on the nano-scale CMOS technology. This optimisation model algorithm is simple and can be applied to the interconnection system optimal design of nano-scale integrated circuits.展开更多
To provide hexapod robots with strategies of locomotion planning, observation experiments were operated on a kind of ant with the use of high speed digital photography and computer assistant analysis. Through digitali...To provide hexapod robots with strategies of locomotion planning, observation experiments were operated on a kind of ant with the use of high speed digital photography and computer assistant analysis. Through digitalization of original analog video, locomotion characters of ants were obtained, the biomimetic foundation was laid for polynomial trajectory planning of multi-legged robots, which was deduced with mathematics method. In addition, five rules were concluded, which apply to hexapod robots marching locomotion planning. The first one is the fundamental strategy of multi-legged robots＇ leg trajectory planning. The second one helps to enhance the static and dynamic stability of multi-legged robots. The third one can improve the validity and feasibility of legs＇ falling points. The last two give criterions of multi-legged robots＇ toe trajectory figures and practical recommendatory constraints. These five rules give a good method for marching locomotion planning of multi-legged robots, and can be expended to turning planning and any other special locomotion.展开更多
method was used to derive the stiffness curve equation of a single throttle-slice in shock absorbers. The analytical formula of large deflection for superposed throttle-slices was deduced directly and generalized. The...method was used to derive the stiffness curve equation of a single throttle-slice in shock absorbers. The analytical formula of large deflection for superposed throttle-slices was deduced directly and generalized. The undetermined coefficients of analytical for- mula were obtained through the finite element method （FEM） and curve fitting. Numerical results show that the analytical formula has satisfactory accuracy.展开更多
In order to improve the firing efficiency of projectiles,it is required to use the universal firing table for gun weapon system equipped with a variety of projectiles.Moreover,the foundation of sharing the universal f...In order to improve the firing efficiency of projectiles,it is required to use the universal firing table for gun weapon system equipped with a variety of projectiles.Moreover,the foundation of sharing the universal firing table is the ballistic matching for two types of projectiles.Therefore,a method is proposed in the process of designing new type of projectile.The least squares support vector machine is utilized to build the ballistic trajectory model of the original projectile,thus it is viable to compare the two trajectories.Then the particle swarm optimization is applied to find the combination of trajectory parameters which meet the criterion of ballistic matching best.Finally,examples show the proposed method is valid and feasible.展开更多
This paper introduces horizon control, seismic control, logging control and facies control methods through the application of the least squares fitting of logging curves, seismic inversion and facies-controlled techni...This paper introduces horizon control, seismic control, logging control and facies control methods through the application of the least squares fitting of logging curves, seismic inversion and facies-controlled techniques. Based on the microgeology and thin section analyses, the lithology, lithofacies and periods of the Permian igneous rocks are described in detail. The seismic inversion and facies-controlled techniques were used to find the distribution characteristics of the igneous rocks and the 3D velocity volume. The least squares fitting of the logging curves overcome the problem that the work area is short of density logging data. Through analysis of thin sections, the lithofacies can be classified into eruption airfall subfacies, eruption pyroclastic flow subfacies and eruption facies.展开更多
基金supported in part by National Natural Science Foundation of China(Nos.61627901,61601353,61801343,and 61901321)。
文摘In this work,the results of plasma microwave transmission diagnosis were analyzed.According to the attenuation and phase shift of the electromagnetic wave propagating in the plasma,the electron density and collision frequency of the plasma can be diagnosed.Since part of the electromagnetic wave is reflected or diffracted when propagating in the plasma,and is not absorbed by the plasma,and this part of the attenuation is still included in the measured attenuation,the attenuation is distorted.Therefore,a curve fitting method is proposed to remove the attenuation caused by the plasma reflection,thereby improving the accuracy of the diagnosis of the collision frequency.The calibration effect of this method on plasmas with different electron densities and collision frequencies is analyzed,and a diagnostic frequency band with good calibration results is given.The curve fitting method is verified by experiment and simulation.After adopting the newly proposed method,the diagnosis accuracy of collision frequency can be increased by 30%.This method can be widely used in various types of plasma diagnosis and provides a new idea for plasma diagnosis.
文摘Sinusoid curve fit is a very useful method in precise measurement, based on the modeling measurement. There are many valuable uses. But, what′s the specifications of the sinusoid curve fit software, and how to evaluate the uncertainty of it are still unknown yet, because they involve manifold factors and are complicated. Every one using the sinusoid curve fit software wants to know it. In this paper, the basic process and the uses of sinusoid curve fit are described, and some specifications and evaluation methods are introduced. One evaluation example of sinusoid curve fit software is discussed, the results and the specification are good.
基金the Open Foundation Project of Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology Open Fund Project.
文摘Existing curve fitting algorithms of NC machining path mainly focus on the control of fitting error,but ignore the problem that the original discrete cutter position points are not enough in the high curvature area of the tool path.It may cause a sudden change in the drive force of the feed axis,resulting in a large fluctuation in the feed speed.This paper proposes a new non-uniform rational B-spline(NURBS)curve fitting optimization method based on curvature smoothing preset point constraints.First,the short line segments generated by the CAM software are optimally divided into different segment regions,and then the curvature of the short line segments in each region is adjusted to make it smoother.Secondly,a set of characteristic points reflecting the change of the curvature of the fitted curve is constructed as the control apex of the fitted curve,and the curve is fitted using the NURBS curve fitting optimization method based on the curvature smoothing preset point constraint.Finally,the curve fitting error and curve volatility are analyzed with an example,which verifies that the method can significantly improve the curvature smoothness of the high-curvature tool path,reduce the fitting error,and improve the feed speed.
基金Supported by the State Key Laboratory of Millimeter Waves(K200819)~~
文摘The one-order phase of the echo changes if there is relative radial moving between the object and the radar, i.e. , the Doppler effect. The Doppler effect is widely used in radar signal processing. The transverse motion of the object cannot change the one-order phase of the echo, but the high-order phase. The high-order Doppler effect of the transverse moving target is presented and a new algorithm for obtaining the transverse velocity is given. The scalar velocity of a target moving steadily in any direction can be calculated with one-order and two-order items of the echo phase. The calculating method and simulating results are given. As the transverse speed is 900 km/h, the speed calculation error is less than 0. 06% if SNR of echo signal is higher than 0 dB.
文摘Objective：To investigate the reliability for kinetic assay of substance with background predicted by the integrated method using uricase reaction as model. Methods： Absorbance before uricase action （Δ0） was estimated by extrapolation with given lag time of steady-state reaction. With Km fixed at 12.5μmol/L, background absorbance （Δb） was predicted by nonlinearly fitting integrated Michaelis-Menten equation to Candida utilis uricase reaction curve. Uric acid in reaction solution was determined by the difference （ΔA） between Δ0 and Δb. Results .Ab usually showed deviation 〈3% from direct assay with residual substrate done fifth of initial substrate for analysis. ΔA showed CV 〈5% with resistance to common interferences except xanthine, and it linearly responded to uric acid with slope consistent to the absorptivity of uric acid. The lower limit was 2.0 μmol/L and upper limit reached 30 μmol/L in reaction solution with data monitored within 8 min reaction at 0. 015 U/ml uricase. Preliminary application to serum and urine gave better precision than the direct equilibrium method without the removal of proteins before analysis. Conclusion .This kinetic method with background predicted by the integrated method was reliable for enzymatic analysis, and it showed resistance to common interferences and enhanced efficiency at much lower cost.
基金This work is supported by the NationalNatural Science Foundation of China （No. 11872207）；the Postgraduate Research & Practice Innovation Program of Jiangsu Province (No. KYCX18_0266)the Fundamental Research Funds for the Central Universities(No.kfjj20180105)
文摘A self-sensing test method for the temperature of piezoelectric stack,based on the high correlation between the static capacitance and the stack temperature,is proposed in order to construct a self-sufficient methodology of temperature measurement. Firstly,a theoretical model of static capacitance of the piezoelectric stack under preload was set up,and the influence of preload on the static capacitance was analyzed. Secondly,the correctness of the model was verified by static capacitance test experiments under various preloading conditions. Finally, the temperature measurement experiments at low-temperature stage for two kinds of piezoelectric stacks,namely the lowtemperature-resistant piezoelectric stack and conventional piezoelectric stack, were conducted under various preloading conditions using a polynomial fitting method. The results,which validate the accuracy of the test method,show that the maximum temperature deviations of the two kinds of piezoelectric stack are 3.9 ℃ and 2.8 ℃,respectively,when the preload force is close to the specified value. The test method uses the piezoelectric stack itself as a temperature sensor,which does not require additional equipment for temperature sensing,so that the space and equipment cost could be economized. And the test for static capacitance is concise and convenient,which indicates that in the cooling process,a concise and efficient test of the temperature of the piezoelectric stack could be realized so as to grasp the current temperature change in time.
文摘In this study,by means of the experiments for desulfurization of model diesel through oxidative extraction,the changes associated with the rate of desulfurization of diesel and the mechanism for oxidation of sulfides in diesel were explored. Through studying the mechanism for oxidation of sulfides and the principle of solvent extraction,the kinetic equation of desulfurization via oxidative extraction were determined. By means of the evaluation of model parameters and curve fitting,the reaction order between organic sulfide and sulfone,the intrinsic oxidation rate constant of organic sulfide and sulfone,and the equilibrium constant between sulfone in model diesel and extractive solvent were determined. The experimental values of the desulfurization rate and the theoretical values of the corresponding model equation had closely demonstrated that the desulfurization reaction rate had high accuracy. And the reaction kinetics could provide an important basis for diesel desulfurization process in the future.
基金supported by the National Natural Science Foundation of China (Grant Nos.60725415 and 60971066)the National High-tech Program (Grant Nos.2009AA01Z258 and 2009AA01Z260)the National Key Lab Foundation (Grant No.ZHD200904)
文摘As the feature size of the CMOS integrated circuit continues to shrink, the more and more serious scattering effect has a serious impact on interconnection performance, such as delay and bandwidth. Based on the impact of the scattering effect on latency and bandwidth, this paper first presents the quality-factor model which optimises latency and bandwidth effectively with the consideration of the scattering effect. Then we obtain the analytical model of line width and spacing with application of curve-fitting method. The proposed model has been verified and compared based on the nano-scale CMOS technology. This optimisation model algorithm is simple and can be applied to the interconnection system optimal design of nano-scale integrated circuits.
基金Sponsored by the Ministerial Level Advanced Research Foundation(65822576)
文摘To provide hexapod robots with strategies of locomotion planning, observation experiments were operated on a kind of ant with the use of high speed digital photography and computer assistant analysis. Through digitalization of original analog video, locomotion characters of ants were obtained, the biomimetic foundation was laid for polynomial trajectory planning of multi-legged robots, which was deduced with mathematics method. In addition, five rules were concluded, which apply to hexapod robots marching locomotion planning. The first one is the fundamental strategy of multi-legged robots＇ leg trajectory planning. The second one helps to enhance the static and dynamic stability of multi-legged robots. The third one can improve the validity and feasibility of legs＇ falling points. The last two give criterions of multi-legged robots＇ toe trajectory figures and practical recommendatory constraints. These five rules give a good method for marching locomotion planning of multi-legged robots, and can be expended to turning planning and any other special locomotion.
基金Supported by the Ministerial Level Advanced Research Foundation(51404040104BQ0146)
文摘method was used to derive the stiffness curve equation of a single throttle-slice in shock absorbers. The analytical formula of large deflection for superposed throttle-slices was deduced directly and generalized. The undetermined coefficients of analytical for- mula were obtained through the finite element method （FEM） and curve fitting. Numerical results show that the analytical formula has satisfactory accuracy.
基金supported by the National Natural Science Foundation of China(No.51006052)
文摘In order to improve the firing efficiency of projectiles,it is required to use the universal firing table for gun weapon system equipped with a variety of projectiles.Moreover,the foundation of sharing the universal firing table is the ballistic matching for two types of projectiles.Therefore,a method is proposed in the process of designing new type of projectile.The least squares support vector machine is utilized to build the ballistic trajectory model of the original projectile,thus it is viable to compare the two trajectories.Then the particle swarm optimization is applied to find the combination of trajectory parameters which meet the criterion of ballistic matching best.Finally,examples show the proposed method is valid and feasible.
基金A Project Funded by National Science and Technology Major Project (2011ZX05001-002-003)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)Key Laboratory for Coalbed Methane Resources and Reservoir formation Process, CUMT, Ministry of Education, China
文摘This paper introduces horizon control, seismic control, logging control and facies control methods through the application of the least squares fitting of logging curves, seismic inversion and facies-controlled techniques. Based on the microgeology and thin section analyses, the lithology, lithofacies and periods of the Permian igneous rocks are described in detail. The seismic inversion and facies-controlled techniques were used to find the distribution characteristics of the igneous rocks and the 3D velocity volume. The least squares fitting of the logging curves overcome the problem that the work area is short of density logging data. Through analysis of thin sections, the lithofacies can be classified into eruption airfall subfacies, eruption pyroclastic flow subfacies and eruption facies.
