Although the slippage effect has been extensively studied,most of the previous studies focused on the impact of the slippage effect on apparent permeability within a low pore pressure range,resulting in the inability ...Although the slippage effect has been extensively studied,most of the previous studies focused on the impact of the slippage effect on apparent permeability within a low pore pressure range,resulting in the inability of matching the evolution of permeability in the remaining pressure range.In this paper,a new apparent permeability model that reveals the evolution of permeability under the combined action of effective stress and slippage in the full pore pressure range was proposed.In this model,both intrinsic permeability and slippage coefficient are stress dependent.Three experimental tests with pore pressure lower than 2 MPa and a test with pore pressure at about 10 MPa using cores from the same origin under constant confining stress and constant effective stress are conducted.By comparing experimental data and another apparent permeability model,we proved the fidelity of our newly developed model.Furthermore,the contribution factor of the slippage effect Rslip is used to determine the low pore pressure limit with significant slippage effect.Our results show that both narrow initial pore size and high effective stress increase the critical pore pressure.Finally,the evolutions of the slippage coefficient and the intrinsic permeability under different boundary conditions were analyzed.展开更多
Flexible risers are crucial pieces of equipment for moving output fluids from wells to platforms during the extraction of oil and gas from deepsea resources.One of the causes of collapse in these pipes is the high hyd...Flexible risers are crucial pieces of equipment for moving output fluids from wells to platforms during the extraction of oil and gas from deepsea resources.One of the causes of collapse in these pipes is the high hydrostatic pressure applied to risers in deep water.The innermost layer of a riser,known as the carcass layer,plays a critical role in resistance to external pressure.In this study,we investigated the collapse(nonlinear buckling)of a riser under external pressure,and a novel design based on the structure of a beetle’s exoskeleton was used to increase the load capacity of the carcass layer.This type of beetle skeleton is constructed in such a way that it creates strong connections among the various parts of the external skeleton to considerably enhance strength against external pressure while allowing necessary movements.To assess the performance of the design in comparison with the original design,we examined the nonlinear buckling of the new structure under external pressure.Through genetic algorithm optimization,design parameters were obtained,and the maximum strength before collapse was determined.Results show that the critical pressure in the new design substantially increases relative to that in the original design.展开更多
Natural gases containing sour components exhibit different gas compressibility factor （Z） behavior than do sweet gases. Therefore, a new accurate method should be developed to account for these differences. Several ...Natural gases containing sour components exhibit different gas compressibility factor （Z） behavior than do sweet gases. Therefore, a new accurate method should be developed to account for these differences. Several methods are available today for calculating the Z-factor from an equation of state. However, these equations are more complex than the foregoing correlations, involving a large number of parameters, which require more complicated and longer computations. The aim of this study is to develop a simplified calculation method for a rapid estimating Z-factor for sour natural gases containing as much as 90% total acid gas. In this article, two new correlations are first presented for calculating the pseudo- critical pressure and temperature of the gas mixture as a function of the gas specific gravity. Then, a simple correlation on the basis of the standard gas compressibility factor chart is introduced for a quick estimation of sweet gases＇ compressibility factor as a function of reduced pressure and temperature. Finally, a new corrective term related to the mole fractions of carbon dioxide and hydrogen sulfide is developed.展开更多
In order to study the water-inrush mechanism of concealed collapse pillars from the mechanical view, a mechanical model for water-inrush of collapse pillars has been established based on thick plate theory of elastic ...In order to study the water-inrush mechanism of concealed collapse pillars from the mechanical view, a mechanical model for water-inrush of collapse pillars has been established based on thick plate theory of elastic mechanics in this paper.By solving this model the deformation of water-resistant rock strata under the action of water pressure and the expression of critical water pressure for collapse pillar waterinrush have been obtained The research results indicate that：the boundary conditions and strength of water-resistant strata play important roles in influencing water-inrush of collapse pillars.The critical water-inrush pressure is determined by both relative thickness and absolute thickness of water-resistant strata.展开更多
The recent discovery of high-temperature superconductivity in iron-based pnictides （chalcogenides） not only trig- gers tremendous enthusiasm in searching for new superconducting materials, but also opens a new avenu...The recent discovery of high-temperature superconductivity in iron-based pnictides （chalcogenides） not only trig- gers tremendous enthusiasm in searching for new superconducting materials, but also opens a new avenue to the study of the Kondo physics. CeFeAsO is a parent compound of the 1111-type iron-based superconductors. It shows 3d- antiferromagnetic （AFM） ordering below 139 K and 4f-AFM ordering below 4 K. On the other hand, the phosphide CeFePO is a ferromagnetically corelated heavy-fermion （HF） metal with Kondo scale TK 10 K. These properties set up a new platform for research of the interplay among magnetism, Kondo effect, and superconductivity （SC）. In this review, we present the recent progress in the study of chemical pressure effect in CeFeAsOl_yFy （y = 0 and 0.05）. This P/As-doping in CeFeAsO serves as an effective controlling parameter which leads to two magnetic critical points, Xcl -- 0.4 and Xc2 - 0.92, associated with suppression of 3d and 4f magnetism, respectively. We also observe a turning point of AFM-FM ordering of Ce3＋ moment at Xc3 - 0.37. The SC is absent in the phase diagram, which is attributed to the destruction to Cooper pair by Ce-FM fluctuations in the vicinity of Xcl. We continue to investigate CeFeAsl-xPxO0.95Fo.os. With the separation of xcl and xc3, this chemical pressure results in a broad SC region 0〈 x 〈 0.53, while the original HF behavior is driven away by 5% F- doping. Different roles of P and F dopings are addressed, and the interplay between SC and Ce-4f magnetism is also discussed.展开更多
基金supported by the National Natural Science Foundation of China(No.52079077)the Natural Science Foundation of Shandong Province(No.ZR2021QE069)China Postdoctoral Science Foundation(No.2019M662402).
文摘Although the slippage effect has been extensively studied,most of the previous studies focused on the impact of the slippage effect on apparent permeability within a low pore pressure range,resulting in the inability of matching the evolution of permeability in the remaining pressure range.In this paper,a new apparent permeability model that reveals the evolution of permeability under the combined action of effective stress and slippage in the full pore pressure range was proposed.In this model,both intrinsic permeability and slippage coefficient are stress dependent.Three experimental tests with pore pressure lower than 2 MPa and a test with pore pressure at about 10 MPa using cores from the same origin under constant confining stress and constant effective stress are conducted.By comparing experimental data and another apparent permeability model,we proved the fidelity of our newly developed model.Furthermore,the contribution factor of the slippage effect Rslip is used to determine the low pore pressure limit with significant slippage effect.Our results show that both narrow initial pore size and high effective stress increase the critical pore pressure.Finally,the evolutions of the slippage coefficient and the intrinsic permeability under different boundary conditions were analyzed.
文摘Flexible risers are crucial pieces of equipment for moving output fluids from wells to platforms during the extraction of oil and gas from deepsea resources.One of the causes of collapse in these pipes is the high hydrostatic pressure applied to risers in deep water.The innermost layer of a riser,known as the carcass layer,plays a critical role in resistance to external pressure.In this study,we investigated the collapse(nonlinear buckling)of a riser under external pressure,and a novel design based on the structure of a beetle’s exoskeleton was used to increase the load capacity of the carcass layer.This type of beetle skeleton is constructed in such a way that it creates strong connections among the various parts of the external skeleton to considerably enhance strength against external pressure while allowing necessary movements.To assess the performance of the design in comparison with the original design,we examined the nonlinear buckling of the new structure under external pressure.Through genetic algorithm optimization,design parameters were obtained,and the maximum strength before collapse was determined.Results show that the critical pressure in the new design substantially increases relative to that in the original design.
文摘Natural gases containing sour components exhibit different gas compressibility factor （Z） behavior than do sweet gases. Therefore, a new accurate method should be developed to account for these differences. Several methods are available today for calculating the Z-factor from an equation of state. However, these equations are more complex than the foregoing correlations, involving a large number of parameters, which require more complicated and longer computations. The aim of this study is to develop a simplified calculation method for a rapid estimating Z-factor for sour natural gases containing as much as 90% total acid gas. In this article, two new correlations are first presented for calculating the pseudo- critical pressure and temperature of the gas mixture as a function of the gas specific gravity. Then, a simple correlation on the basis of the standard gas compressibility factor chart is introduced for a quick estimation of sweet gases＇ compressibility factor as a function of reduced pressure and temperature. Finally, a new corrective term related to the mole fractions of carbon dioxide and hydrogen sulfide is developed.
基金Projects are supported by the National Basic Research Program of China(No.2007CB209400)the National Natural Science Foundation of China(Nos.50974115,50904065 and 50974107)the 111 Project(No.B07028).
文摘In order to study the water-inrush mechanism of concealed collapse pillars from the mechanical view, a mechanical model for water-inrush of collapse pillars has been established based on thick plate theory of elastic mechanics in this paper.By solving this model the deformation of water-resistant rock strata under the action of water pressure and the expression of critical water pressure for collapse pillar waterinrush have been obtained The research results indicate that：the boundary conditions and strength of water-resistant strata play important roles in influencing water-inrush of collapse pillars.The critical water-inrush pressure is determined by both relative thickness and absolute thickness of water-resistant strata.
基金supported by the National Basic Research Program of China(Grant Nos.2011CBA00103 and 2010CB923003)the National Natural Science Foundation of China
文摘The recent discovery of high-temperature superconductivity in iron-based pnictides （chalcogenides） not only trig- gers tremendous enthusiasm in searching for new superconducting materials, but also opens a new avenue to the study of the Kondo physics. CeFeAsO is a parent compound of the 1111-type iron-based superconductors. It shows 3d- antiferromagnetic （AFM） ordering below 139 K and 4f-AFM ordering below 4 K. On the other hand, the phosphide CeFePO is a ferromagnetically corelated heavy-fermion （HF） metal with Kondo scale TK 10 K. These properties set up a new platform for research of the interplay among magnetism, Kondo effect, and superconductivity （SC）. In this review, we present the recent progress in the study of chemical pressure effect in CeFeAsOl_yFy （y = 0 and 0.05）. This P/As-doping in CeFeAsO serves as an effective controlling parameter which leads to two magnetic critical points, Xcl -- 0.4 and Xc2 - 0.92, associated with suppression of 3d and 4f magnetism, respectively. We also observe a turning point of AFM-FM ordering of Ce3＋ moment at Xc3 - 0.37. The SC is absent in the phase diagram, which is attributed to the destruction to Cooper pair by Ce-FM fluctuations in the vicinity of Xcl. We continue to investigate CeFeAsl-xPxO0.95Fo.os. With the separation of xcl and xc3, this chemical pressure results in a broad SC region 0〈 x 〈 0.53, while the original HF behavior is driven away by 5% F- doping. Different roles of P and F dopings are addressed, and the interplay between SC and Ce-4f magnetism is also discussed.
