A series of triple hierarchical micro-mesomacroporous N-doped carbon shells with hollow cores have been successfully prepared via etching N-doped hollow carbon spheres with CO_2 at high temperatures.The surface areas,...A series of triple hierarchical micro-mesomacroporous N-doped carbon shells with hollow cores have been successfully prepared via etching N-doped hollow carbon spheres with CO_2 at high temperatures.The surface areas, total pore volumes and microporepercentages of the CO_2-activated samples evidently increase with increasing activation temperature from 800 to950 °C, while the N contents show a contrary trend from7.6 to 3.8 at%. The pyridinic and graphitic nitrogen groups are dominant among various N-containing groups in the samples. The 950 °C-activated sample(CANHCS-950) has the largest surface area(2072 m^2 g^(-1)), pore volume(1.96 cm^3 g^(-1)), hierarchical micro-mesopore distributions(1.2, 2.6 and 6.2 nm), hollow macropore cores(*91 nm)and highest relative content of pyridinic and graphitic N groups. This triple micro-meso-macropore system could synergistically enhance the activity because macropores could store up the reactant, mesopores could reduce the transport resistance of the reactants to the active sites, and micropores could be in favor of the accumulation of ions.Therefore, the CANHCS-950 with optimized structure shows the optimal and comparable oxygen reduction reaction(ORR) activity but superior methanol tolerance and long-term durability to commercial Pt/C with a 4 e--dominant transfer pathway in alkaline media. These excellent properties in combination with good stability and recyclability make CANHCSs among the most promising metal-free ORR electrocatalysts reported so far in practical applications.展开更多
Based on the generalized uncertainty principle with maximum momentum arid minimal length, we discuss the equation of state of ideal ultra-relativistic Fermi gases at zero temperature. Maximum momentum avoids the probl...Based on the generalized uncertainty principle with maximum momentum arid minimal length, we discuss the equation of state of ideal ultra-relativistic Fermi gases at zero temperature. Maximum momentum avoids the problem that the Fermi degenerate pressure blows up since the increase of the Fermi energy is not limited. Applying this equation of state to the Tolman-Oppenheimer Volkoff （TOV） equation, the quantum gravitational effects on the cores of compact stars are discussed. In the center of compact stars, we obtain the singularity-free solution of the metric component, gtt ～-（1 ＋ 0.2185×r^2）. By numerically solving the TOV equation, we find that quantum gravity plays an important role in the region r～10^4α0（△x）min. Current observed masses of neutron stars indicate that the dimensionless parameter α0 cannot exceed 10^19.展开更多
The core imbibition and shifting nuclear magnetic resonance(NMR) imaging experiment has loss of surface oil phase and air adsorption, which will affect the accuracy of the experiment result. To solve this issue, a mod...The core imbibition and shifting nuclear magnetic resonance(NMR) imaging experiment has loss of surface oil phase and air adsorption, which will affect the accuracy of the experiment result. To solve this issue, a modified experiment method, in-situ imbibition NMR method has been worked out. This method was used to carry out sandstone core imbibition experiment in nanofluid, and the oil migration images in the entire process were recorded. In combination with physical properties of the sandstone cores and the variations of the driving force during the imbibition process, imbibition characteristics of the sandstone cores with different permeabilities in nanofluid were analyzed. The results show that: the nanofluid can greatly reduce the interfacial tension of oil phase and improve the efficiency of imbibition and oil discharge, the higher the concentration, the lower the interfacial tension and the higher the efficiency of imbibition and oil discharge would be, but when the concentration reaches a certain value, the increase in imbibition and oil discharge efficiency slows down;the rise of temperature can reduce the oil viscosity resistance and interfacial tension, and hence enhance the imbibition and oil discharge rate;when the sandstone core is higher in permeability, the bottom crude oil would migrate upward and discharge during the imbibition, the higher the permeability of the sandstone core, the more obvious this phenomenon would be, and the phenomenon is shown as top oil discharge characteristic;when the sandstone core is low in permeability, the crude oil in the outer layer of the sandstone core would discharge first during the imbibition, then crude oil in the inside of the core would disperse outside and discharge, which is shown as oil discharge characteristic around the core;but under long time effect of nanofluid, the core would become more and more water-wet and reduce in the oil-water interfacial tension, so would have top oil discharge characteristic in the later stage of imbibition.展开更多
Hollow mesoporous silica spheres with magnetite cores(HMSMC) have been fabricated by Vacuum Nano-casting Route. The amount of magnetite cores and saturation magnetization value can be easily adjusted by changing the c...Hollow mesoporous silica spheres with magnetite cores(HMSMC) have been fabricated by Vacuum Nano-casting Route. The amount of magnetite cores and saturation magnetization value can be easily adjusted by changing the concentration of iron nitrate solution used in the synthesis procedure. Furthermore, the as-prepared HMSMCs still maintain narrow mesopore distribution, high surface area and large pore volume after the hollow cores of hollow mesoporous silica spheres were filled with magnetite particles. Specially, when the saturation magnetization value of as-prepared HMSMCs reaches 22.0 emu/g, the surface area and pore volume of corresponding HMSMCs are 149 m^2/g and 0.19 cm^3/g, respectively, and the pore size is 2.30 nm. The corresponding samples are characterized by X-ray diffraction, N_2 sorption isotherms, transmission electron microscopy and vibrating-sample magnetometer.展开更多
Purpose:Currently,social tagging behavior,including social tag,online review and score information,has been investigated extensively,however,there are very few works about the relationship among them.In this paper,we ...Purpose:Currently,social tagging behavior,including social tag,online review and score information,has been investigated extensively,however,there are very few works about the relationship among them.In this paper,we have investigated the problem using Douban Website as the research object.Design/methodology/approach:Firstly,we divided social tags into those with high and low frequency counts,respectively,divided books into popular and unpopular books according to books’popularity,and chose core tags in terms of distribution;Secondly,we conducted an investigation on the relationship between social tags and books scores including comprehensive analyses and assorted analyses.Findings:The more popular the books become,the higher scores they will get.Tag frequency is not related with book scores directly,and neither does the tag distribution weight.Tags in books of'fashion'category are relatively disordered,which may associate with books miscellany and readers diversity.Research limitations:Social tags are growing dramatically,strategies and researches to this respect are just experimental exploration.Open source books,data and educational resources are not consummate.Comparative studies are necessary,but the result may be affected by researches based on data analyses.In addition,this research has been conducted only on one website,namely Douban,and the tags provided by Douban Book are not complete.All these factors could influence the versatility of the results.Practical implications:There are very a few studies that have been conducted on the relationship between tags and scores,and this research could bring a certain practical significance to popular books prediction and tags’quality research.Originality/value:Less attention has been paid to Chinese books while analyzing relationship between scores and tags of user generated content.Analyses based on the Chinese books may fill in the gap of better understanding the relationship between the two objects.展开更多
In this article, the author studies the mechanism of formation of necrotic cores in the growth of tumors by using rigorous analysis of a mathematical model. The model modifies a corresponding tumor growth model propos...In this article, the author studies the mechanism of formation of necrotic cores in the growth of tumors by using rigorous analysis of a mathematical model. The model modifies a corresponding tumor growth model proposed by Byrne and Chaplain in 1996, in the case where no inhibitors exist. The modification is made such that both necrotic tumors and nonnecrotic tumors can be considered in a joint way. It is proved that if the nutrient supply is below a threshold value, then there is not dormant tumor, and all evolutionary tumors will finally vanish. If instead the nutrient supply is above this threshold value then there is a unique dormant tumor which can either be necrotic or nonnecrotic, depending on the level of the nutrient supply and the level of dead-cell dissolution rate, and all evolutionary tumors will converge to this dormant tumor. It is also proved that, in the se.cond case, if the dormant tumor is necrotic then an evolutionary tumor will form a necrotic core at a finite time, and if the dormant tumor is nonnecrotic then an evolutionary tumor will also be nonnecrotic from a finite time.展开更多
An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented. Polar folded quadra structures are regarded as a geometric basis for these cores whose standard fra...An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented. Polar folded quadra structures are regarded as a geometric basis for these cores whose standard frag ment has lhe fourlh degree of axial symmelry. The classification of the polar strucluresaredeseribedanda method of various quadra slrueture synthesis is developed. A possibilily to provide high strength of lhe structure due m preservation of faces reinforcement pattern is presented. Arrangemen! of the plane core on a bi curvature surface is also introduced. Besides, provision of isotropyof the core in two or three directions are described. Finally, exam ples of cellular folded cores manufaclured from basalt reinforced plaslic are demonslrated.展开更多
The phenomenon of multiphase flow in porous media is confronted in various fields of science and industrial applications. Owing to the complicated porous structure, the flow mechanisms are still not completely resolve...The phenomenon of multiphase flow in porous media is confronted in various fields of science and industrial applications. Owing to the complicated porous structure, the flow mechanisms are still not completely resolved. A critical and fundamental question is the variation of pore structure and REV sizes among different types of porous media. In this study, a total of 22 porous samples were employed to systematically evaluate the pore-based architecture and REV sizes based on X-ray CT image analysis and pore network modelling. It is found that the irregular grain shapes give rise to large specific areas,narrow and thin throats in identical sand packs. The packs with more types of sands, or composited by the sands with larger difference in diameter, have larger specific area, smaller tortuosity and pore spaces.Based on the REV measurement through porosity solely, the REV sizes of sand packs are generally in the order of magnitude of 10^(-2) m L, while it is at least one order of magnitude smaller in rock cores. Our result indicates that the combination of porosity and Euler number is an effective indicator to get the REV sizes of porous samples.展开更多
A self-designed full-diameter core experimental facility was used to evaluate the flow heterogeneity of bedding fractures at four radial directions under different closure pressures and injection rates,using full-diam...A self-designed full-diameter core experimental facility was used to evaluate the flow heterogeneity of bedding fractures at four radial directions under different closure pressures and injection rates,using full-diameter cores retaining original natural bedding fractures.The distribution morphology of bedding surface affects the conductivity of bedding fractures,and the flow capacity of bedding fractures in four radial directions varies greatly with the closure pressure and injection rate.The rougher the fracture surface,the greater the flow capacity varies with the closure pressure.For unsupported bedding fractures,the mean percentage error(MPE)of the conductivity in four radial directions increase gradually with the increase of the closure pressure.This phenomenon is especially prominent in deep rock samples.It is indicated that the flow heterogeneity of bedding fractures tends to increase with the closure pressure.When proppant is placed in the fracture,at a low closure pressure,due to the combined effects of self-support of rough fracture surface,proppant instability and uneven proppant placement,the flow heterogeneity is greater than that when proppant is not placed at the same closure pressure;however,with the increase of the closure pressure,the proppant becomes compact and stable,and the flow heterogeneity is mitigated gradually.展开更多
Purpose:In this paper,we use author clustering based on journal coupling(i.e.,shared academic journals)to determine researchers who have the same scientific interests and similar conceptual frameworks.The basic assump...Purpose:In this paper,we use author clustering based on journal coupling(i.e.,shared academic journals)to determine researchers who have the same scientific interests and similar conceptual frameworks.The basic assumption is that authors who publish in the same academic journals are more likely to share similar conceptual frameworks and interests than those who never publish in the same venues.Therefore,they are more likely to be part of the same invisible college(i.e.,authors in this subgroup contribute materially to research on the same topic and often publish their work in similar publication venues).Design/methodology/approach:Test in a controlled exercise the grouping of authors based on journal coupling to determine invisible colleges in a research field using a case study of 302 authors who had published in the Information Science and Library Science(IS&LS)category of the Web of Science Core Collection.For each author,we retrieved all the scientific journals in which this author had published his/her articles.We then used the cosine measure to calculate the similarity between authors(both first and second order).Findings:In this paper,using journal coupling of IS&LS authors,we found four main invisible colleges:“Information Systems”,“Business and Information Management”,“Quantitative Information Science”and“Library Science.”The main journals that determine the existence of these invisible colleges were Inform Syst Res,Inform Syst J,J Bus Res,J Knowl Manage,J Informetr,Pro Int Conf Sci Inf,Int J Geogr Inf Sci,J Am Med Inform Assn,and Learn Publ.However,the main journals that demonstrate that IS&LS determine a field were J Am Soc Inf Sci Tec/J Assoc Inf Sci Tech,Scientometrics,Inform Process Manag,and J Inf Sci.Research limitations:The results shown in this article are from a controlled exercise.The analysis performed using journal coupling excludes books,book chapters,and conference papers.In this article,only academic journals were used for the representation of research results.Practical implications:Our results may be of interest to IS&LS scholars.This is because these results provide a new lens for grouping authors,making use of the authors’journal publication profile and journal coupling.Furthermore,extending our approach to the study of the structure of other disciplines would possibly be of interest to historians of science as well as scientometricians.Originality/value:This is a novel approach based on journal coupling to determine authors who are most likely to be part of the same invisible college.展开更多
The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and soci...The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and society.Technological exploration and research in the field of deep space science,especially lunar-based exploration,is a scientific strategy that has been pursued in China and worldwide.Drilling and sampling are key to accurate exploration of the desirable characteristics of deep lunar resources.In this study,an in-situ condition preserved coring(ICP-Coring)and analysis system,which can be used to test drilling tools and develop effective sampling strategies,was designed.The key features of the system include:(1)capability to replicate the extreme temperature fluctuations of the lunar environment(-185 to 200℃)with intelligent temperature control;(2)ability to maintain a vacuum environment at a scale of 10^(-3) Pa,both under unloaded conditions within Ф580 mm×1000 mm test chamber,and under loaded conditions using Ф400 mm×800 mm lunar rock simulant;(3)application of axial pressures up to 4 MPa and confining pressures up to 3.5 MPa;(4)sample rotation at any angle with a maximum sampling length of 800 mm;and(5)multiple modes of rotary-percussive drilling,controlled by penetration speed and weight on bit(WOB).Experimental studies on the drilling characteristics in the lunar rock simulant-loaded state under different drill bit-percussive-vacuum environment configurations were conducted.The results show that the outgassing rate of the lunar soil simulant is greater than that of the lunar rock simulant and that a low-temperature environment contributes to a reduced vacuum of the lunar-based simulated environment.The rotary-percussive drilling method effectively shortens the sampling time.With increasing sampling depth,the temperature rise of the drilling tools tends to rapidly increase,followed by slow growth or steady fluctuations.The temperature rise energy accumulation of the drill bits under vacuum is more significant than that under atmospheric pressure,approximately 1.47 times higher.The real-time monitored drilling pressure,penetration speed and rotary torque during drilling serve as parameters for discriminating the drilling status.The results of this research can provide a scientific basis for returning samples from lunar rock in extreme lunar-based environments.展开更多
Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability...Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.展开更多
Using pressure-preserved coring technique to determine in-situ gas content provides a more precise assessment of gas resource reserves and safeguard of mining safety in coal seams. How coring technique and depth affec...Using pressure-preserved coring technique to determine in-situ gas content provides a more precise assessment of gas resource reserves and safeguard of mining safety in coal seams. How coring technique and depth affect the determination of gas content is unclear due to borehole zoning rupture caused by roadway excavation and drilling disturbance. To this end, a proposed coupling model of stress distribution and gas migration was simulated and validated by FLAC^(3D) and COMSOL Multiphysics considering superposition effects of roadway excavation and drilling disturbance. The findings indicate that the roadway surrounding rock displays distinct zoning features including stress relief zone, stress concentration zone that is composed of plastic zone, elastic zone, and original stress zone;and the broken situations depending on the borehole peeping are consistent with the corresponding simulation results.On this basis, this study proposes a set of drilling coring depth calculation and prediction model for the gas desorption affected area under engineering disturbance. Optimal depth of coring drilling is not only approach to the in-situ coal bulk, but also can get the balance of the drilling workload and cost controlling. According to the typical mine site geological conditions and the numerical simulation results in this study, if the roadway excavation time is ~1 year, it is recommended that the pressure-preserved coring depth should be greater than 17 m.展开更多
An innovative multi-layer composite explosion containment vessel(CECV)utilizing a sliding steel platealuminum honeycomb-fiber cloth sandwich is put forward to improve the anti-explosion capacity of a conventional sing...An innovative multi-layer composite explosion containment vessel(CECV)utilizing a sliding steel platealuminum honeycomb-fiber cloth sandwich is put forward to improve the anti-explosion capacity of a conventional single-layer explosion containment vessel(SECV).Firstly,a series of experiments and finite element(FE)simulations of internal explosions are implemented to understand the basic anti-explosion characteristics of a SECV and the rationality of the computational models and methods is verified by the comparison between the experimental results and simulation results.Based on this,the CECV is designed in detail and a variety of FE simulations are carried out to investigate effects of the sandwich structure,the explosive quantity and the laying mode of the fiber cloth on anti-explosion performance and dynamic response of the CECV under internal explosions.Simulation results indicate that the end cover is the critical position for both the SECV and CECV.The maximum pressure of the explosion shock wave and the maximum strain of the CECV can be extremely declined compared to those of the SECV.As a result,the explosive quantity the CECV can sustain is up to 20 times of that the SECV can sustain.Besides,as the explosive quantity increases,the internal pressure of the CECV keeps growing and the plastic deformation and failure of the sandwich structure become more and more severe,yielding plastic strain of the CECV in addition to elastic strain.The results also reveal that the laying angles of the fiber cloth's five layers have an impact on the anti-explosion performance of the CECV.For example,the CECV with fiber cloth layered in 0°/45°/90°/45°/0°mode has the optimal anti-capacity,compared to 0°/0°/0°/0°/0°and 0°/30°/60°/30°/0°modes.Overall,owing to remarkable anti-explosion capacity,this CECV can be regarded as a promising candidate for explosion resistance.展开更多
Phenazine-based non-fullerene acceptors(NFAs)have demonstrated great potential in improving the power conversion efficiency(PCE)of organic solar cells(OSCs).Halogenation is known to be an effective strategy for increa...Phenazine-based non-fullerene acceptors(NFAs)have demonstrated great potential in improving the power conversion efficiency(PCE)of organic solar cells(OSCs).Halogenation is known to be an effective strategy for increasing optical absorption,refining energy levels,and improving molecular packing in organic semiconductors.Herein,a series of NFAs(Pz IC-4H,Pz IC-4F,Pz IC-4Cl,Pz IC-2Br)with phenazine as the central core and with/without halogen-substituted(dicyanomethylidene)-indan-1-one(IC)as the electron-accepting end group were synthesized,and the effect of end group matched phenazine central unit on the photovoltaic performance was systematically studied.Synergetic photophysical and morphological analyses revealed that the PM6:Pz IC-4F blend involves efficient exciton dissociation,higher charge collection and transfer rates,better crystallinity,and optimal phase separation.Therefore,OSCs based on PM6:Pz IC-4F as the active layer exhibited a PCE of 16.48%with an open circuit voltage(Voc)and energy loss of 0.880 V and 0.53 e V,respectively.Accordingly,this work demonstrated a promising approach by designing phenazine-based NFAs for achieving high-performance OSCs.展开更多
Despite advances in renewable energy sources, the world's current infrastructure and consumption patterns still heavily depend on crude oil. Enhanced oil recovery(EOR) is a crucial method for significantly increas...Despite advances in renewable energy sources, the world's current infrastructure and consumption patterns still heavily depend on crude oil. Enhanced oil recovery(EOR) is a crucial method for significantly increasing the amount of crude oil extracted from mature and declining oil fields. Nanomaterials have shown great potential in improving EOR methods due to their unique properties, such as high surface area, tunable surface chemistry, and the ability to interact at the molecular level with fluids and rock surfaces. This study examines the potential use of incorporating ethoxylated molybdenum disulfide with a unique three-dimensional flower-like morphology for overcoming the challenges associated with oil recovery from reservoirs characterized by complex pore structures and low permeability. The synthesized nanomaterial features a chemical composition that encompasses a polar ethoxy group linking molybdenum disulfide nanosheets and an alkylamine chain. The ethoxy group promotes interactions with water molecules through hydrogen bonding and electrostatic forces, disrupting the cohesive forces among water molecules and reduction surface tension at the oil-water interface. As a result, the nanomaterial achieves an ultra-low interfacial tension of 10^(-3) mN/m. Core flooding experiments demonstrate a significant oil recovery of approximately 70% at a concentration as low as 50 ppm. This research paves the way for the design and synthesis of advanced extended surfactant-like nanomaterials,offering a promising avenue for enhancing oil recovery efficiency.展开更多
Pressure-preserved coring is an effective means to develop deep resources. However, due to the complexity of existing pressure-preserved technology, the average success rate of pressure-preserved coring is low. In res...Pressure-preserved coring is an effective means to develop deep resources. However, due to the complexity of existing pressure-preserved technology, the average success rate of pressure-preserved coring is low. In response, a novel in situ magnetically controlled self-sealing pressure-preserved coring technology for deep reserves has been proposed and validated. This innovative technology distinguishes itself from conventional methods by employing noncontact forces to replace traditional pretensioning mechanisms, thereby enhancing the mechanical design of pressure-preserved coring equipment and significantly boosting the fault tolerance of the technology. Here, we report on the design,theoretical calculations, experimental validation, and industrial testing of this technology. Through theoretical and simulation calculations, the self-sealing composite magnetic field of the pressure controller was optimized. The initial pre-tensioning force of the optimal magnetic field was 13.05 N. The reliability of the magnetically controlled self-sealing pressure-preserved coring technology was verified using a self-developed self-sealing pressure performance testing platform, confirming the accuracy of the composite magnetic field calculation theory. Subsequently, a magnetically controlled self-triggering pressure-preserved coring device was designed. Field pressure-preserved coring was then conducted,preliminarily verifying the technology's effective self-sealing performance in industrial applications.Furthermore, the technology was analyzed and verified to be adaptable to complex reservoir environments with pressures up to 30 MPa, temperatures up to 80℃, and p H values ranging from 1 to 14. These research results provide technical support for multidirectional pressure-preserved coring, thus paving a new technical route for deep energy exploration through coring.展开更多
基金the financial support from the National Key Research and Development Program of China(2016YFB0700204)NSFC(51502327,51602332)+1 种基金Science and Technology Commission of Shanghai Municipality(15520720400,15YF1413800,14DZ2261203 and 16DZ2260603)Key Project for Young Researcher of State Key Laboratory of High Performance Ceramics and Superfine Microstructure and One Hundred Talent Plan of Chinese Academy of Sciences
文摘A series of triple hierarchical micro-mesomacroporous N-doped carbon shells with hollow cores have been successfully prepared via etching N-doped hollow carbon spheres with CO_2 at high temperatures.The surface areas, total pore volumes and microporepercentages of the CO_2-activated samples evidently increase with increasing activation temperature from 800 to950 °C, while the N contents show a contrary trend from7.6 to 3.8 at%. The pyridinic and graphitic nitrogen groups are dominant among various N-containing groups in the samples. The 950 °C-activated sample(CANHCS-950) has the largest surface area(2072 m^2 g^(-1)), pore volume(1.96 cm^3 g^(-1)), hierarchical micro-mesopore distributions(1.2, 2.6 and 6.2 nm), hollow macropore cores(*91 nm)and highest relative content of pyridinic and graphitic N groups. This triple micro-meso-macropore system could synergistically enhance the activity because macropores could store up the reactant, mesopores could reduce the transport resistance of the reactants to the active sites, and micropores could be in favor of the accumulation of ions.Therefore, the CANHCS-950 with optimized structure shows the optimal and comparable oxygen reduction reaction(ORR) activity but superior methanol tolerance and long-term durability to commercial Pt/C with a 4 e--dominant transfer pathway in alkaline media. These excellent properties in combination with good stability and recyclability make CANHCSs among the most promising metal-free ORR electrocatalysts reported so far in practical applications.
基金Supported by the Fundamental Research Funds for the Central Universities under Grant No ZYGX2009X008
文摘Based on the generalized uncertainty principle with maximum momentum arid minimal length, we discuss the equation of state of ideal ultra-relativistic Fermi gases at zero temperature. Maximum momentum avoids the problem that the Fermi degenerate pressure blows up since the increase of the Fermi energy is not limited. Applying this equation of state to the Tolman-Oppenheimer Volkoff （TOV） equation, the quantum gravitational effects on the cores of compact stars are discussed. In the center of compact stars, we obtain the singularity-free solution of the metric component, gtt ～-（1 ＋ 0.2185×r^2）. By numerically solving the TOV equation, we find that quantum gravity plays an important role in the region r～10^4α0（△x）min. Current observed masses of neutron stars indicate that the dimensionless parameter α0 cannot exceed 10^19.
基金Supported by National Natural Science Foundation of China (NO. 51274136)Shanghai Key Discipline Construction Project (NO. S30106)Shanghai Key Laboratory of Mechanics Application in Energy Engineering and Key Project of Shanghai Municipal Education Commission (Construction Project of Peak Discipline)。
文摘The core imbibition and shifting nuclear magnetic resonance(NMR) imaging experiment has loss of surface oil phase and air adsorption, which will affect the accuracy of the experiment result. To solve this issue, a modified experiment method, in-situ imbibition NMR method has been worked out. This method was used to carry out sandstone core imbibition experiment in nanofluid, and the oil migration images in the entire process were recorded. In combination with physical properties of the sandstone cores and the variations of the driving force during the imbibition process, imbibition characteristics of the sandstone cores with different permeabilities in nanofluid were analyzed. The results show that: the nanofluid can greatly reduce the interfacial tension of oil phase and improve the efficiency of imbibition and oil discharge, the higher the concentration, the lower the interfacial tension and the higher the efficiency of imbibition and oil discharge would be, but when the concentration reaches a certain value, the increase in imbibition and oil discharge efficiency slows down;the rise of temperature can reduce the oil viscosity resistance and interfacial tension, and hence enhance the imbibition and oil discharge rate;when the sandstone core is higher in permeability, the bottom crude oil would migrate upward and discharge during the imbibition, the higher the permeability of the sandstone core, the more obvious this phenomenon would be, and the phenomenon is shown as top oil discharge characteristic;when the sandstone core is low in permeability, the crude oil in the outer layer of the sandstone core would discharge first during the imbibition, then crude oil in the inside of the core would disperse outside and discharge, which is shown as oil discharge characteristic around the core;but under long time effect of nanofluid, the core would become more and more water-wet and reduce in the oil-water interfacial tension, so would have top oil discharge characteristic in the later stage of imbibition.
基金support of this research by the National Science Foundation of China(Grant No.50702072)Chinese Academy of Science(Grant No.KJCX2.YW.M02)+1 种基金National 863 Projects(Grant No.2007AA03Z317)Shanghai Nano-Science Program(Grant No.0852nm03900)
文摘Hollow mesoporous silica spheres with magnetite cores(HMSMC) have been fabricated by Vacuum Nano-casting Route. The amount of magnetite cores and saturation magnetization value can be easily adjusted by changing the concentration of iron nitrate solution used in the synthesis procedure. Furthermore, the as-prepared HMSMCs still maintain narrow mesopore distribution, high surface area and large pore volume after the hollow cores of hollow mesoporous silica spheres were filled with magnetite particles. Specially, when the saturation magnetization value of as-prepared HMSMCs reaches 22.0 emu/g, the surface area and pore volume of corresponding HMSMCs are 149 m^2/g and 0.19 cm^3/g, respectively, and the pore size is 2.30 nm. The corresponding samples are characterized by X-ray diffraction, N_2 sorption isotherms, transmission electron microscopy and vibrating-sample magnetometer.
基金supported by the National Natural Science Foundation of China(Grant No.:71273126)the Foundation for Humanities and Social Science of the Chinese Ministry of Education(Grant No.:13YJA870020)
文摘Purpose:Currently,social tagging behavior,including social tag,online review and score information,has been investigated extensively,however,there are very few works about the relationship among them.In this paper,we have investigated the problem using Douban Website as the research object.Design/methodology/approach:Firstly,we divided social tags into those with high and low frequency counts,respectively,divided books into popular and unpopular books according to books’popularity,and chose core tags in terms of distribution;Secondly,we conducted an investigation on the relationship between social tags and books scores including comprehensive analyses and assorted analyses.Findings:The more popular the books become,the higher scores they will get.Tag frequency is not related with book scores directly,and neither does the tag distribution weight.Tags in books of'fashion'category are relatively disordered,which may associate with books miscellany and readers diversity.Research limitations:Social tags are growing dramatically,strategies and researches to this respect are just experimental exploration.Open source books,data and educational resources are not consummate.Comparative studies are necessary,but the result may be affected by researches based on data analyses.In addition,this research has been conducted only on one website,namely Douban,and the tags provided by Douban Book are not complete.All these factors could influence the versatility of the results.Practical implications:There are very a few studies that have been conducted on the relationship between tags and scores,and this research could bring a certain practical significance to popular books prediction and tags’quality research.Originality/value:Less attention has been paid to Chinese books while analyzing relationship between scores and tags of user generated content.Analyses based on the Chinese books may fill in the gap of better understanding the relationship between the two objects.
基金Project supported by the National Natural Science Foundation of China (10171112)
文摘In this article, the author studies the mechanism of formation of necrotic cores in the growth of tumors by using rigorous analysis of a mathematical model. The model modifies a corresponding tumor growth model proposed by Byrne and Chaplain in 1996, in the case where no inhibitors exist. The modification is made such that both necrotic tumors and nonnecrotic tumors can be considered in a joint way. It is proved that if the nutrient supply is below a threshold value, then there is not dormant tumor, and all evolutionary tumors will finally vanish. If instead the nutrient supply is above this threshold value then there is a unique dormant tumor which can either be necrotic or nonnecrotic, depending on the level of the nutrient supply and the level of dead-cell dissolution rate, and all evolutionary tumors will converge to this dormant tumor. It is also proved that, in the se.cond case, if the dormant tumor is necrotic then an evolutionary tumor will form a necrotic core at a finite time, and if the dormant tumor is nonnecrotic then an evolutionary tumor will also be nonnecrotic from a finite time.
基金supported by the Ministry of Education and Science of Russian Federation (No.RFMEFI57414X0078)
文摘An idea to develop a family of cellular cores for sandwich panels using a technology of prepreg folding is presented. Polar folded quadra structures are regarded as a geometric basis for these cores whose standard frag ment has lhe fourlh degree of axial symmelry. The classification of the polar strucluresaredeseribedanda method of various quadra slrueture synthesis is developed. A possibilily to provide high strength of lhe structure due m preservation of faces reinforcement pattern is presented. Arrangemen! of the plane core on a bi curvature surface is also introduced. Besides, provision of isotropyof the core in two or three directions are described. Finally, exam ples of cellular folded cores manufaclured from basalt reinforced plaslic are demonslrated.
基金supported by National Natural Science Foundation of China (Grant No. 52106213, 51876015)Shanxi Scholarship Council of China (2020-116)+1 种基金supported by the Key Laboratory of Ocean Energy Utilization and Energy Conservation of Ministry of Education (LOEC-201903)the Science Foundation of North University of China (XJJ201907)。
文摘The phenomenon of multiphase flow in porous media is confronted in various fields of science and industrial applications. Owing to the complicated porous structure, the flow mechanisms are still not completely resolved. A critical and fundamental question is the variation of pore structure and REV sizes among different types of porous media. In this study, a total of 22 porous samples were employed to systematically evaluate the pore-based architecture and REV sizes based on X-ray CT image analysis and pore network modelling. It is found that the irregular grain shapes give rise to large specific areas,narrow and thin throats in identical sand packs. The packs with more types of sands, or composited by the sands with larger difference in diameter, have larger specific area, smaller tortuosity and pore spaces.Based on the REV measurement through porosity solely, the REV sizes of sand packs are generally in the order of magnitude of 10^(-2) m L, while it is at least one order of magnitude smaller in rock cores. Our result indicates that the combination of porosity and Euler number is an effective indicator to get the REV sizes of porous samples.
基金Supported by National Natural Science Foundation of China Regional Innovation and Development Joint Fund(U19A2043)Project of PetroChina Chuanqing Drilling Engineering Co.,Ltd.(CQ2021B-39-Z2-4).
文摘A self-designed full-diameter core experimental facility was used to evaluate the flow heterogeneity of bedding fractures at four radial directions under different closure pressures and injection rates,using full-diameter cores retaining original natural bedding fractures.The distribution morphology of bedding surface affects the conductivity of bedding fractures,and the flow capacity of bedding fractures in four radial directions varies greatly with the closure pressure and injection rate.The rougher the fracture surface,the greater the flow capacity varies with the closure pressure.For unsupported bedding fractures,the mean percentage error(MPE)of the conductivity in four radial directions increase gradually with the increase of the closure pressure.This phenomenon is especially prominent in deep rock samples.It is indicated that the flow heterogeneity of bedding fractures tends to increase with the closure pressure.When proppant is placed in the fracture,at a low closure pressure,due to the combined effects of self-support of rough fracture surface,proppant instability and uneven proppant placement,the flow heterogeneity is greater than that when proppant is not placed at the same closure pressure;however,with the increase of the closure pressure,the proppant becomes compact and stable,and the flow heterogeneity is mitigated gradually.
文摘Purpose:In this paper,we use author clustering based on journal coupling(i.e.,shared academic journals)to determine researchers who have the same scientific interests and similar conceptual frameworks.The basic assumption is that authors who publish in the same academic journals are more likely to share similar conceptual frameworks and interests than those who never publish in the same venues.Therefore,they are more likely to be part of the same invisible college(i.e.,authors in this subgroup contribute materially to research on the same topic and often publish their work in similar publication venues).Design/methodology/approach:Test in a controlled exercise the grouping of authors based on journal coupling to determine invisible colleges in a research field using a case study of 302 authors who had published in the Information Science and Library Science(IS&LS)category of the Web of Science Core Collection.For each author,we retrieved all the scientific journals in which this author had published his/her articles.We then used the cosine measure to calculate the similarity between authors(both first and second order).Findings:In this paper,using journal coupling of IS&LS authors,we found four main invisible colleges:“Information Systems”,“Business and Information Management”,“Quantitative Information Science”and“Library Science.”The main journals that determine the existence of these invisible colleges were Inform Syst Res,Inform Syst J,J Bus Res,J Knowl Manage,J Informetr,Pro Int Conf Sci Inf,Int J Geogr Inf Sci,J Am Med Inform Assn,and Learn Publ.However,the main journals that demonstrate that IS&LS determine a field were J Am Soc Inf Sci Tec/J Assoc Inf Sci Tech,Scientometrics,Inform Process Manag,and J Inf Sci.Research limitations:The results shown in this article are from a controlled exercise.The analysis performed using journal coupling excludes books,book chapters,and conference papers.In this article,only academic journals were used for the representation of research results.Practical implications:Our results may be of interest to IS&LS scholars.This is because these results provide a new lens for grouping authors,making use of the authors’journal publication profile and journal coupling.Furthermore,extending our approach to the study of the structure of other disciplines would possibly be of interest to historians of science as well as scientometricians.Originality/value:This is a novel approach based on journal coupling to determine authors who are most likely to be part of the same invisible college.
基金supported by the National Natural Science Foundation of China(Nos.52225403,U2013603,52434004,and 52404365)the Program for Guangdong Introducing Innovative and Entrepreneurial Teams(No.2019ZT08G315)+2 种基金the Shenzhen National Science Fund for Distinguished Young Scholars(No.RCJC20210706091948015)the National Key Research and Development Program of China(2023YFF0615404)the Scientific Instrument Developing Project of Shenzhen University。
文摘The lunar surface and its deep layers contain abundant resources and valuable information resources,the exploration and exploitation of which are important for the sustainable development of the human economy and society.Technological exploration and research in the field of deep space science,especially lunar-based exploration,is a scientific strategy that has been pursued in China and worldwide.Drilling and sampling are key to accurate exploration of the desirable characteristics of deep lunar resources.In this study,an in-situ condition preserved coring(ICP-Coring)and analysis system,which can be used to test drilling tools and develop effective sampling strategies,was designed.The key features of the system include:(1)capability to replicate the extreme temperature fluctuations of the lunar environment(-185 to 200℃)with intelligent temperature control;(2)ability to maintain a vacuum environment at a scale of 10^(-3) Pa,both under unloaded conditions within Ф580 mm×1000 mm test chamber,and under loaded conditions using Ф400 mm×800 mm lunar rock simulant;(3)application of axial pressures up to 4 MPa and confining pressures up to 3.5 MPa;(4)sample rotation at any angle with a maximum sampling length of 800 mm;and(5)multiple modes of rotary-percussive drilling,controlled by penetration speed and weight on bit(WOB).Experimental studies on the drilling characteristics in the lunar rock simulant-loaded state under different drill bit-percussive-vacuum environment configurations were conducted.The results show that the outgassing rate of the lunar soil simulant is greater than that of the lunar rock simulant and that a low-temperature environment contributes to a reduced vacuum of the lunar-based simulated environment.The rotary-percussive drilling method effectively shortens the sampling time.With increasing sampling depth,the temperature rise of the drilling tools tends to rapidly increase,followed by slow growth or steady fluctuations.The temperature rise energy accumulation of the drill bits under vacuum is more significant than that under atmospheric pressure,approximately 1.47 times higher.The real-time monitored drilling pressure,penetration speed and rotary torque during drilling serve as parameters for discriminating the drilling status.The results of this research can provide a scientific basis for returning samples from lunar rock in extreme lunar-based environments.
基金supported by the Sichuan Science and Technology Program (Grant Nos.2023NSFSC0004,2023NSFSC0790)the National Natural Science Foundation of China (Grant Nos.51827901,52304033)the Sichuan University Postdoctoral Fund (Grant No.2024SCU12093)。
文摘Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.
基金supported by National Natural Science Foundation of China (Nos. 51827901, 52104096)the Shenzhen National Science Fund for Distinguished Young Scholars (No. RCJC20210706091948015)+2 种基金Open Fund of State Key Laboratory of Hydraulics and Mountain River Engineering, Sichuan University (No. SKHL2216)National Key R & D Program of China (No. 2022YFB3706605)Youth Foundation of Sichuan Natural Science Foundation (No. 2023NSFSC0780)。
文摘Using pressure-preserved coring technique to determine in-situ gas content provides a more precise assessment of gas resource reserves and safeguard of mining safety in coal seams. How coring technique and depth affect the determination of gas content is unclear due to borehole zoning rupture caused by roadway excavation and drilling disturbance. To this end, a proposed coupling model of stress distribution and gas migration was simulated and validated by FLAC^(3D) and COMSOL Multiphysics considering superposition effects of roadway excavation and drilling disturbance. The findings indicate that the roadway surrounding rock displays distinct zoning features including stress relief zone, stress concentration zone that is composed of plastic zone, elastic zone, and original stress zone;and the broken situations depending on the borehole peeping are consistent with the corresponding simulation results.On this basis, this study proposes a set of drilling coring depth calculation and prediction model for the gas desorption affected area under engineering disturbance. Optimal depth of coring drilling is not only approach to the in-situ coal bulk, but also can get the balance of the drilling workload and cost controlling. According to the typical mine site geological conditions and the numerical simulation results in this study, if the roadway excavation time is ~1 year, it is recommended that the pressure-preserved coring depth should be greater than 17 m.
基金supported by the National Natural Science Foundation of China (Grant No.11902157)Natural Science Foundation of Jiangsu Province (Grant No.BK20180417)the Scientific and Technological Innovation Project of Army Engineering Univeristy of PLA (Grant No.KYGYZXJK150025)。
文摘An innovative multi-layer composite explosion containment vessel(CECV)utilizing a sliding steel platealuminum honeycomb-fiber cloth sandwich is put forward to improve the anti-explosion capacity of a conventional single-layer explosion containment vessel(SECV).Firstly,a series of experiments and finite element(FE)simulations of internal explosions are implemented to understand the basic anti-explosion characteristics of a SECV and the rationality of the computational models and methods is verified by the comparison between the experimental results and simulation results.Based on this,the CECV is designed in detail and a variety of FE simulations are carried out to investigate effects of the sandwich structure,the explosive quantity and the laying mode of the fiber cloth on anti-explosion performance and dynamic response of the CECV under internal explosions.Simulation results indicate that the end cover is the critical position for both the SECV and CECV.The maximum pressure of the explosion shock wave and the maximum strain of the CECV can be extremely declined compared to those of the SECV.As a result,the explosive quantity the CECV can sustain is up to 20 times of that the SECV can sustain.Besides,as the explosive quantity increases,the internal pressure of the CECV keeps growing and the plastic deformation and failure of the sandwich structure become more and more severe,yielding plastic strain of the CECV in addition to elastic strain.The results also reveal that the laying angles of the fiber cloth's five layers have an impact on the anti-explosion performance of the CECV.For example,the CECV with fiber cloth layered in 0°/45°/90°/45°/0°mode has the optimal anti-capacity,compared to 0°/0°/0°/0°/0°and 0°/30°/60°/30°/0°modes.Overall,owing to remarkable anti-explosion capacity,this CECV can be regarded as a promising candidate for explosion resistance.
基金financially supported by the National Natural Science Foundation of China (22279152,U21A20331)the National Science Fund for Distinguished Young Scholars (21925506)+1 种基金the Ningbo key scientific and technological project (2022Z117)the Ningbo Natural Science Foundation (2021J192)。
文摘Phenazine-based non-fullerene acceptors(NFAs)have demonstrated great potential in improving the power conversion efficiency(PCE)of organic solar cells(OSCs).Halogenation is known to be an effective strategy for increasing optical absorption,refining energy levels,and improving molecular packing in organic semiconductors.Herein,a series of NFAs(Pz IC-4H,Pz IC-4F,Pz IC-4Cl,Pz IC-2Br)with phenazine as the central core and with/without halogen-substituted(dicyanomethylidene)-indan-1-one(IC)as the electron-accepting end group were synthesized,and the effect of end group matched phenazine central unit on the photovoltaic performance was systematically studied.Synergetic photophysical and morphological analyses revealed that the PM6:Pz IC-4F blend involves efficient exciton dissociation,higher charge collection and transfer rates,better crystallinity,and optimal phase separation.Therefore,OSCs based on PM6:Pz IC-4F as the active layer exhibited a PCE of 16.48%with an open circuit voltage(Voc)and energy loss of 0.880 V and 0.53 e V,respectively.Accordingly,this work demonstrated a promising approach by designing phenazine-based NFAs for achieving high-performance OSCs.
基金funded by the National Natural Science Foundation of China (No. 52174046)。
文摘Despite advances in renewable energy sources, the world's current infrastructure and consumption patterns still heavily depend on crude oil. Enhanced oil recovery(EOR) is a crucial method for significantly increasing the amount of crude oil extracted from mature and declining oil fields. Nanomaterials have shown great potential in improving EOR methods due to their unique properties, such as high surface area, tunable surface chemistry, and the ability to interact at the molecular level with fluids and rock surfaces. This study examines the potential use of incorporating ethoxylated molybdenum disulfide with a unique three-dimensional flower-like morphology for overcoming the challenges associated with oil recovery from reservoirs characterized by complex pore structures and low permeability. The synthesized nanomaterial features a chemical composition that encompasses a polar ethoxy group linking molybdenum disulfide nanosheets and an alkylamine chain. The ethoxy group promotes interactions with water molecules through hydrogen bonding and electrostatic forces, disrupting the cohesive forces among water molecules and reduction surface tension at the oil-water interface. As a result, the nanomaterial achieves an ultra-low interfacial tension of 10^(-3) mN/m. Core flooding experiments demonstrate a significant oil recovery of approximately 70% at a concentration as low as 50 ppm. This research paves the way for the design and synthesis of advanced extended surfactant-like nanomaterials,offering a promising avenue for enhancing oil recovery efficiency.
基金supported by the National Natural Science Foundation of China (52225403, 52304146)the Sichuan Science and Technology Program (2023NSFSC0919, 2023NSFSC0790)the China Postdoctoral Science Foundation (2023M742460)。
文摘Pressure-preserved coring is an effective means to develop deep resources. However, due to the complexity of existing pressure-preserved technology, the average success rate of pressure-preserved coring is low. In response, a novel in situ magnetically controlled self-sealing pressure-preserved coring technology for deep reserves has been proposed and validated. This innovative technology distinguishes itself from conventional methods by employing noncontact forces to replace traditional pretensioning mechanisms, thereby enhancing the mechanical design of pressure-preserved coring equipment and significantly boosting the fault tolerance of the technology. Here, we report on the design,theoretical calculations, experimental validation, and industrial testing of this technology. Through theoretical and simulation calculations, the self-sealing composite magnetic field of the pressure controller was optimized. The initial pre-tensioning force of the optimal magnetic field was 13.05 N. The reliability of the magnetically controlled self-sealing pressure-preserved coring technology was verified using a self-developed self-sealing pressure performance testing platform, confirming the accuracy of the composite magnetic field calculation theory. Subsequently, a magnetically controlled self-triggering pressure-preserved coring device was designed. Field pressure-preserved coring was then conducted,preliminarily verifying the technology's effective self-sealing performance in industrial applications.Furthermore, the technology was analyzed and verified to be adaptable to complex reservoir environments with pressures up to 30 MPa, temperatures up to 80℃, and p H values ranging from 1 to 14. These research results provide technical support for multidirectional pressure-preserved coring, thus paving a new technical route for deep energy exploration through coring.
