Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is sti...Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is still unsatisfactory because of the inevitably decreased activity of electrocatalysts when assembly into a thick electrode with high mass loading.Herein,we report a hierarchical electrocatalyst based on carbon microtube@nanotube core-shell nanostructure(CMT@CNT),which demonstrates superior electrocatalytic activity for oxygen reduction reaction and oxygen evolution reaction with a small potential gap of 0.678 V.Remarkably,when being employed as air-cathode in ZAB,the CMT@CNT presents an excellent performance with a high power density(160.6 mW cm^−2),specific capacity(781.7 mAhgZn^−1)as well as long cycle stability(117 h,351 cycles).Moreover,the ZAB performance of CMT@CNT is maintained well even under high mass loading(3 mg cm−2,three times as much as traditional usage),which could afford high power density and energy density for advanced electronic equipment.We believe that this work is promising for the rational design of hierarchical structured electrocatalysts for advanced metal-air batteries.展开更多
Organic carbonyl compounds are considered as promising candidates for lithium batteries due to theirhigh capacity and environmental friendliness, However, they suffer from serious dissolution in the elec-trolyte, lead...Organic carbonyl compounds are considered as promising candidates for lithium batteries due to theirhigh capacity and environmental friendliness, However, they suffer from serious dissolution in the elec-trolyte, leading to fast capacity decay. Here we report core-shell structured 1,4-benzoquinone@titaniumdioxide （BQ@TiO2） composite as cathode for lithium batteries. The composite cathode can deliver a highdischarge capacity of 441.2 mA h/g at 50 mA/g and a high capacity retention of 80.7% after 100 cycles. Thegood cycling performance of BQ@TiO2 composite can be attributed to the suppressed dissolution of BQ,which results from the physical confinement effect of Ti02 shell and the strong interactions between BQand Ti02. Moreover, the combination of ex situ infrared spectra and density functional theory calculationsreveals that the active redox sites of BQ are carbonyl groups. This work provides an alternative way tomitigate the dissolution of small carbonyl compounds and thus enhance their cycling stability.展开更多
Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell t...Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell thickness on the fine structures(local atom arrangement) of core materials was investigated by X-ray Absorption Near Edge Structure(XANES) and Extended X-ray Absorption Fine Structure(EXAFS).The results indicate that the shell thickness affects the fine structure of the core materials by causing atomic re-arrangement between the hexagonal close pack(hcp) and the face centered cubic(fcc) structure, and forming Co-Au bonds in the core-shell interface.展开更多
In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly techniqu...In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.展开更多
The properties of Raman phonons are very important due to the fact that they can availably reflect some important physical information. An abnormal Raman peak is observed at about 558 cm-1 in In film composed of In/In...The properties of Raman phonons are very important due to the fact that they can availably reflect some important physical information. An abnormal Raman peak is observed at about 558 cm-1 in In film composed of In/InOx core-shell structured nanoparticles, and the phonon mode stays very stable when the temperature changes. Our results indicate that this Raman scattering is attributed to the existence of incomplete indium oxide in the oxide shell.展开更多
To enhance the nucleation and crystallization properties of polyester (e.g., polyethylene terephthalate, PET), core-shell structured particles are used to improve these properties by controlling the inorganic di...To enhance the nucleation and crystallization properties of polyester (e.g., polyethylene terephthalate, PET), core-shell structured particles are used to improve these properties by controlling the inorganic dispersion properties in the polymers. In the paper, monodisperse particles of silica/polystyrene (PS) are prepared with both dispersion and emulsion polymerization techniques. The monodisperse silicon dioxide particles are first prepared with the seed growth method and modified by the coupling agents. Silica is properly modified with KH-570, and its size deviation is 3.0% or so. The modified silica then reacts with the mixture of ethanol, water medium, and monomer of styrene under dispersion polymerization. Results show that the dispersion polymerization technique is more suitable for monodisperse core-shell SiO2/PS particles than that of the emulsion. The morphology and molecular structure of the core-shell particles are investigated with the transmission electron microscope (TEM), and fourier transform infra-red spectroscopy (FTIR). The results show that the modified silica particles are successfully encapsulated with polystyrene. The average number of silica particles encapsulated into each polystyrene sphere decreases when the size of silica particles increases from 50 nm to 600 nm, and will approach one when the silica is greater than 380nm in size. The mass ratio for silica/PS particles in emulsion polymerization is 4.7/1, lower than that of 6.8/1 for dispersion polymerization, which is the first reported optimized data for preparing the similar monodisperse composite particles. Thus, the PS shell in the former is thinner than that in the latter.展开更多
In this study, a novel core-shell structure of ZSM-5@Mg(Al)O(abbreviated as Z@MA) was designed by using the sol-gel method, and the influence of different weight ratios of Mg(Al)O/ZSM-5 on the structure and catalytic ...In this study, a novel core-shell structure of ZSM-5@Mg(Al)O(abbreviated as Z@MA) was designed by using the sol-gel method, and the influence of different weight ratios of Mg(Al)O/ZSM-5 on the structure and catalytic performance was investigated. The as-obtained materials were characterized by XRD, N_2-physisorption, SEM, FT-IR, NH_3-TPD and XPS analyses. The results showed that, with the increase of the weight ratio of Mg(Al)O/ZSM-5, the thickness of Mg(Al)O shell was improved, and the pore structure and physiochemical properties of core-shell materials were directly modified. After introduction of Mg(Al)O, the acidity properties of different materials were significantly suppressed. Meanwhile, more Sn oxide species in Z@MA could facilitate the anchoring of Pt on the support. By effectively employing these modifications, the capacity of the catalysts to accommodate coke was significanty improved and the carbon deposits were migrated from active metal to the carrier. When the weight ratio was equal to 3, the catalyst PtSnNa/Z@MA showed a highest conversion and high selectivity in propane dehydrogenation.展开更多
This study demonstrated that a Ru-Ni bimetallic core-shell catalyst（0.6%Ru-Ni）@Si O2with a proper surface Ru concentration is superior in achieving better catalytic activity and tunable H2/CO ratio at a comparativel...This study demonstrated that a Ru-Ni bimetallic core-shell catalyst（0.6%Ru-Ni）@Si O2with a proper surface Ru concentration is superior in achieving better catalytic activity and tunable H2/CO ratio at a comparatively lower reaction temperature（700℃）.Compared to the impregnation method,the hydrothermal approach leads to a highly uniform Ru distribution throughout the core particles.Uniform Ru distribution would result in a proper surface Ru concentration as well as more direct Ru-Ni interaction,accounting for better catalyst performance.Enriched surface Ru species hinders surface carbon deposition,but also declines overall activity and H2/CO ratio,meanwhile likely enhances Ni oxidation to certain degree under the applied reaction conditions.Over the current（m%Ru-Ni）@Si O2catalyst,the formation of fibrous carbon species is suppressed,which accounts for good stability of catalyst within a TOS of 10 h.展开更多
Lithium-sulfur（Li-S） batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and...Lithium-sulfur（Li-S） batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and the shuttling of highly dissoluble lithium polysulfides generated during the cycles.Loading sulfur into porous carbons has been proved to be an effective approach to alleviate these issues.Mesoporous and microporous carbons have been widely used for sulfur accommodation,but mesoporous carbons have poor sulfur confinement,whereas microporous carbons are impeded by low sulfur loading rates.Here,a core-shell carbon,combining both the merits of mesoporous carbon with large pore volume and microporous carbon with effective sulfur confinement,was prepared by coating the mesoporous CMK-3 with a microporous carbon（MPC） shell and served as the carbon host（CMK-3 @MPC） to accommodate sulfur.After sulfur infusion,the as-obtained S/（CMK-3@MPC） cathode delivered a high initial capacity of up to 1422 mAh·g-1 and sustained 654 mAh·g-1 reversible specific capacity after 36 cycles at 0.1 C.The good performance is ascribed to the unique core-shell structure of the CMK-3@MPC matrix,in which sulfur can be effectively confined within the meso/microporous carbon host,thus achieving simultaneously high electrochemical utilization.展开更多
Natural aluminum particles have the core-shell structure.The structure response refers to the mechanical behavior of the aluminum particle structure caused by external influences.The dynamic behavior of the structural...Natural aluminum particles have the core-shell structure.The structure response refers to the mechanical behavior of the aluminum particle structure caused by external influences.The dynamic behavior of the structural response of aluminum core-shell particles before combustion is of great importance for the aluminum powder burning mechanism and its applications.In this paper,an aluminum particle combustion experiment in a detonation environment is conducted and analyzed;the breakage factors of aluminum particles shell in detonation environment are analyzed.The experiment results show that the aluminum particle burns in a gaseous state and condenses into a sub-micron particle cluster.The calculation and simulation demonstrate that the rupture of aluminum particle shell in the detonation environment is mainly caused by the impact of the detonation wave.The detonation wave impacts the aluminum particles,resulting in shell cracking,and due to the shrinkage-expansion of the aluminum core and stripping of the detonation product,the cracked shell is fractured and peeled with the aluminum reacting with the detonation product.展开更多
The performance of dye-sensitized solar cells （DSSCs） is strongly affected by the properties of semiconductor nanoparticles. In this work, we used TiO2 particles prepared by TiC14 hydrolysis n times on A1203 films ...The performance of dye-sensitized solar cells （DSSCs） is strongly affected by the properties of semiconductor nanoparticles. In this work, we used TiO2 particles prepared by TiC14 hydrolysis n times on A1203 films （A/T（n））, and investigated morphology, photoelectric, and electron transport properties of A/T（n）. The TiO2 shell was composed of 10-20 nm nanoparticles and the number of nanoparticles increased with increasing TIC14 treatment times. The highest photoelectric conversion efficiency of 3.23% was obtained as A/T（4）. IMPS results indicated that electron transport rate was high enough to conduct current, and was not the dominating effect to limit the Jsc. Jsc was mainly determined by dye loading on TiO2 and the interconnection of TiO2. These may provide a new strategy for preparing semiconductor working electrodes for DSSC.展开更多
化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于...化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。展开更多
A nano sulfur-based composite cathode material featured by uniform core@shell-structured sulfur@polypyrrole nanoparticles sandwiched in three-dimensional graphene sheets conductive network（S@PPy/GS） is fabricated vi...A nano sulfur-based composite cathode material featured by uniform core@shell-structured sulfur@polypyrrole nanoparticles sandwiched in three-dimensional graphene sheets conductive network（S@PPy/GS） is fabricated via a facile solution-based method. The S@PPy nanoparticles are synthesized by in situ chemical oxidative polymerization of pyrrole on the surface of sulfur particles,and then graphene sheets are covered outside the S@PPy nanoparticles,forming a three-dimensional conductive network. When evaluating the electrochemical performance of S@PPy/GS in a lithium–sulfur battery,it delivers large discharge capacity,excellent cycle stability,and good rate capability. The initial discharge capacity is up to 1040 m Ah/g at 0.1 C,the capacity can remain 537.8 m Ah/g at 0.2 C after 200 cycles,even at a higher rate of 1 C,the specific capacity still reaches 566.5 m Ah/g. The good electrochemical performance is attributed to the unique structure of S@PPy/GS,which can not only provide an excellent transport of lithium and electron ions within the electrodes,but also retard the shuttle effect of soluble lithium polysulfides effectively,thus plays a positive role in building better lithium-sulfur batteries.展开更多
Polymer electrolyte membrane fuel cells(PEMFCs), as an energy conversion technology, have attracted extensive attention due to their high conversion efficiency, low emission, high energy density,and fast fuel charging...Polymer electrolyte membrane fuel cells(PEMFCs), as an energy conversion technology, have attracted extensive attention due to their high conversion efficiency, low emission, high energy density,and fast fuel charging [1,2]. Pt-based catalysts have been acknowledged to be the most effective catalyst for the oxygen reduction reaction(ORR) [3–5]. However, both the source scarcity and high cost of Pt severely hinder the commercial application of the PEMFCs [1,6,7].展开更多
基金supported by the National Natural Science Foundation of China(21922501,21871021 and 21521005)the Beijing Natural Science Foundation(2192040)+1 种基金the National Key Research and Development Programme(2017YFA0206804)the Fundamental Research Funds for the Central Universities(XK1802-6 and 479 XK1803-05).
文摘Zinc-air batteries(ZABs)hold tremendous promise for clean and efficient energy storage with the merits of high theoretical energy density and environmental friendliness.However,the performance of practical ZABs is still unsatisfactory because of the inevitably decreased activity of electrocatalysts when assembly into a thick electrode with high mass loading.Herein,we report a hierarchical electrocatalyst based on carbon microtube@nanotube core-shell nanostructure(CMT@CNT),which demonstrates superior electrocatalytic activity for oxygen reduction reaction and oxygen evolution reaction with a small potential gap of 0.678 V.Remarkably,when being employed as air-cathode in ZAB,the CMT@CNT presents an excellent performance with a high power density(160.6 mW cm^−2),specific capacity(781.7 mAhgZn^−1)as well as long cycle stability(117 h,351 cycles).Moreover,the ZAB performance of CMT@CNT is maintained well even under high mass loading(3 mg cm−2,three times as much as traditional usage),which could afford high power density and energy density for advanced electronic equipment.We believe that this work is promising for the rational design of hierarchical structured electrocatalysts for advanced metal-air batteries.
基金supported by the National Programs for NanoKey Project (2017YFA0206700)the National Natural Science Foundation of China (51231003)the Ministry of Education of China (B12015)
文摘Organic carbonyl compounds are considered as promising candidates for lithium batteries due to theirhigh capacity and environmental friendliness, However, they suffer from serious dissolution in the elec-trolyte, leading to fast capacity decay. Here we report core-shell structured 1,4-benzoquinone@titaniumdioxide （BQ@TiO2） composite as cathode for lithium batteries. The composite cathode can deliver a highdischarge capacity of 441.2 mA h/g at 50 mA/g and a high capacity retention of 80.7% after 100 cycles. Thegood cycling performance of BQ@TiO2 composite can be attributed to the suppressed dissolution of BQ,which results from the physical confinement effect of Ti02 shell and the strong interactions between BQand Ti02. Moreover, the combination of ex situ infrared spectra and density functional theory calculationsreveals that the active redox sites of BQ are carbonyl groups. This work provides an alternative way tomitigate the dissolution of small carbonyl compounds and thus enhance their cycling stability.
基金support from National Science Foundation of China(NSFC,Grant No.50971010)the Fundamental Research Funds for the Central Universities(YWF-11-03-Q-002)
文摘Co@Au core shell nanoparticles(NPs) of different shell thicknesses were fabricated by a combination of the displacement process and the reduction-deposition process in a microfluidic reactor. The effect of the shell thickness on the fine structures(local atom arrangement) of core materials was investigated by X-ray Absorption Near Edge Structure(XANES) and Extended X-ray Absorption Fine Structure(EXAFS).The results indicate that the shell thickness affects the fine structure of the core materials by causing atomic re-arrangement between the hexagonal close pack(hcp) and the face centered cubic(fcc) structure, and forming Co-Au bonds in the core-shell interface.
基金Project supported by the National Natural Science Foundation of China （Grant No 50641006） and the Science Foundation of Education Commission of Beijing, China.
文摘In this paper, Fe30Pt70/Fe3O4 core/shell nanoparticles were synthesized by chemical routine and the layered polyethylenimine （PEI）-Fe30Pt70/Fe3O4 structure was constructed by molecule-mediated self-assembly technique. The dimension of core/shell structured nanoparticles was that of 4nm core and 2 nm shell. After annealing under a flow of forming gas （50%Ar2＋30%H2） for 1 h at or above 400℃, the iron oxide shell was reduced to Fe and diffused to Pt-rieh core, which leaded to the formation of L1. phase FePt at low temperature. The x-ray diffraction results and magnetic properties measurement showed that the chemical ordering temperature of Fe30Pt70/Fe3O4 core/shell nanoparticles assembly can be reduced to as low as 400℃. The sample annealed at 400℃ showed the eoereivity of 4KOe with the applied field of 1.5T. The core/shell structure was suggested to be an effective way to reduce the ordering temperature obviously.
基金Project supported by the National Natural Science Foundation of China （Grant Nos. 11374069 and 61006078）, the National Basic Research Program of China （Grant Nos. 2010CB934102 and 2010CB934101）, and the ＂Strategic Priority Research Program＂ of the Chinese Academy of Sciences （Grant No. XDA09020300）.
文摘The properties of Raman phonons are very important due to the fact that they can availably reflect some important physical information. An abnormal Raman peak is observed at about 558 cm-1 in In film composed of In/InOx core-shell structured nanoparticles, and the phonon mode stays very stable when the temperature changes. Our results indicate that this Raman scattering is attributed to the existence of incomplete indium oxide in the oxide shell.
文摘To enhance the nucleation and crystallization properties of polyester (e.g., polyethylene terephthalate, PET), core-shell structured particles are used to improve these properties by controlling the inorganic dispersion properties in the polymers. In the paper, monodisperse particles of silica/polystyrene (PS) are prepared with both dispersion and emulsion polymerization techniques. The monodisperse silicon dioxide particles are first prepared with the seed growth method and modified by the coupling agents. Silica is properly modified with KH-570, and its size deviation is 3.0% or so. The modified silica then reacts with the mixture of ethanol, water medium, and monomer of styrene under dispersion polymerization. Results show that the dispersion polymerization technique is more suitable for monodisperse core-shell SiO2/PS particles than that of the emulsion. The morphology and molecular structure of the core-shell particles are investigated with the transmission electron microscope (TEM), and fourier transform infra-red spectroscopy (FTIR). The results show that the modified silica particles are successfully encapsulated with polystyrene. The average number of silica particles encapsulated into each polystyrene sphere decreases when the size of silica particles increases from 50 nm to 600 nm, and will approach one when the silica is greater than 380nm in size. The mass ratio for silica/PS particles in emulsion polymerization is 4.7/1, lower than that of 6.8/1 for dispersion polymerization, which is the first reported optimized data for preparing the similar monodisperse composite particles. Thus, the PS shell in the former is thinner than that in the latter.
文摘In this study, a novel core-shell structure of ZSM-5@Mg(Al)O(abbreviated as Z@MA) was designed by using the sol-gel method, and the influence of different weight ratios of Mg(Al)O/ZSM-5 on the structure and catalytic performance was investigated. The as-obtained materials were characterized by XRD, N_2-physisorption, SEM, FT-IR, NH_3-TPD and XPS analyses. The results showed that, with the increase of the weight ratio of Mg(Al)O/ZSM-5, the thickness of Mg(Al)O shell was improved, and the pore structure and physiochemical properties of core-shell materials were directly modified. After introduction of Mg(Al)O, the acidity properties of different materials were significantly suppressed. Meanwhile, more Sn oxide species in Z@MA could facilitate the anchoring of Pt on the support. By effectively employing these modifications, the capacity of the catalysts to accommodate coke was significanty improved and the carbon deposits were migrated from active metal to the carrier. When the weight ratio was equal to 3, the catalyst PtSnNa/Z@MA showed a highest conversion and high selectivity in propane dehydrogenation.
基金the financial support from NSFC (21173118, 21373110)MSTC (2013AA031703)
文摘This study demonstrated that a Ru-Ni bimetallic core-shell catalyst（0.6%Ru-Ni）@Si O2with a proper surface Ru concentration is superior in achieving better catalytic activity and tunable H2/CO ratio at a comparatively lower reaction temperature（700℃）.Compared to the impregnation method,the hydrothermal approach leads to a highly uniform Ru distribution throughout the core particles.Uniform Ru distribution would result in a proper surface Ru concentration as well as more direct Ru-Ni interaction,accounting for better catalyst performance.Enriched surface Ru species hinders surface carbon deposition,but also declines overall activity and H2/CO ratio,meanwhile likely enhances Ni oxidation to certain degree under the applied reaction conditions.Over the current（m%Ru-Ni）@Si O2catalyst,the formation of fibrous carbon species is suppressed,which accounts for good stability of catalyst within a TOS of 10 h.
基金supported by the National Natural Science Foundation of China(Grant No.51225204,91127044,U1301244 and 21121063)the National Key Project on Basic Research(Grant No.2011CB935700,2013AA050903 and 2012CB932900)the"Strategic Priority Research Program"of CAS(Grant No.XDA09010300)
文摘Lithium-sulfur（Li-S） batteries belong to one of the promising technologies for high-energy-density rechargeable batteries.However,sulfur cathodes suffer from inherent problems of its poor electronic conductivity and the shuttling of highly dissoluble lithium polysulfides generated during the cycles.Loading sulfur into porous carbons has been proved to be an effective approach to alleviate these issues.Mesoporous and microporous carbons have been widely used for sulfur accommodation,but mesoporous carbons have poor sulfur confinement,whereas microporous carbons are impeded by low sulfur loading rates.Here,a core-shell carbon,combining both the merits of mesoporous carbon with large pore volume and microporous carbon with effective sulfur confinement,was prepared by coating the mesoporous CMK-3 with a microporous carbon（MPC） shell and served as the carbon host（CMK-3 @MPC） to accommodate sulfur.After sulfur infusion,the as-obtained S/（CMK-3@MPC） cathode delivered a high initial capacity of up to 1422 mAh·g-1 and sustained 654 mAh·g-1 reversible specific capacity after 36 cycles at 0.1 C.The good performance is ascribed to the unique core-shell structure of the CMK-3@MPC matrix,in which sulfur can be effectively confined within the meso/microporous carbon host,thus achieving simultaneously high electrochemical utilization.
基金Project supported by the National Natural Science Foundation of China(Grant No.11772058)
文摘Natural aluminum particles have the core-shell structure.The structure response refers to the mechanical behavior of the aluminum particle structure caused by external influences.The dynamic behavior of the structural response of aluminum core-shell particles before combustion is of great importance for the aluminum powder burning mechanism and its applications.In this paper,an aluminum particle combustion experiment in a detonation environment is conducted and analyzed;the breakage factors of aluminum particles shell in detonation environment are analyzed.The experiment results show that the aluminum particle burns in a gaseous state and condenses into a sub-micron particle cluster.The calculation and simulation demonstrate that the rupture of aluminum particle shell in the detonation environment is mainly caused by the impact of the detonation wave.The detonation wave impacts the aluminum particles,resulting in shell cracking,and due to the shrinkage-expansion of the aluminum core and stripping of the detonation product,the cracked shell is fractured and peeled with the aluminum reacting with the detonation product.
基金Project supported by the National Materials Genome Project of China(Grant No.2016YFB0700600)the National Natural Science Foundation of China(Grant No.51673204)
文摘The performance of dye-sensitized solar cells （DSSCs） is strongly affected by the properties of semiconductor nanoparticles. In this work, we used TiO2 particles prepared by TiC14 hydrolysis n times on A1203 films （A/T（n））, and investigated morphology, photoelectric, and electron transport properties of A/T（n）. The TiO2 shell was composed of 10-20 nm nanoparticles and the number of nanoparticles increased with increasing TIC14 treatment times. The highest photoelectric conversion efficiency of 3.23% was obtained as A/T（4）. IMPS results indicated that electron transport rate was high enough to conduct current, and was not the dominating effect to limit the Jsc. Jsc was mainly determined by dye loading on TiO2 and the interconnection of TiO2. These may provide a new strategy for preparing semiconductor working electrodes for DSSC.
文摘化工、纺织印染与农药化肥等产业的蓬勃发展推动着人类社会的进步,但同时也给环境治理带来了巨大难题。目前,光催化降解局限于在特定波长下针对单一有机污染物进行降解,然而现实中的情况往往更复杂。因此,开发一种多功能光催化材料用于光催化降解不同有机污染物显得尤为重要。采用一步无模板溶剂热法合成了核壳结构的C-TiO_(2)复合材料前驱体,并在氩气气氛下煅烧得到高结晶度的C-TiO_(2)复合光催化材料。运用SEM、TEM、XRD和TG等表征手段对材料进行表征,结论如下:550℃煅烧时的样品为包含少量碳的高结晶度的锐钛矿相TiO 2,且550℃煅烧时的样品依然保持了完整的核壳结构。此外,C-TiO_(2)复合材料的比表面积高达85.69 m 2·g^(-1),平均孔径为16.4 nm以及孔体积为0.423 m 3·g^(-1)。在UV-Vis光照射下,C-TiO_(2)复合材料分别对罗丹明B(RhB)、亚甲基蓝(MB)和刚果红(CR)3种染料显示出增强的光催化降解活性。
文摘A nano sulfur-based composite cathode material featured by uniform core@shell-structured sulfur@polypyrrole nanoparticles sandwiched in three-dimensional graphene sheets conductive network（S@PPy/GS） is fabricated via a facile solution-based method. The S@PPy nanoparticles are synthesized by in situ chemical oxidative polymerization of pyrrole on the surface of sulfur particles,and then graphene sheets are covered outside the S@PPy nanoparticles,forming a three-dimensional conductive network. When evaluating the electrochemical performance of S@PPy/GS in a lithium–sulfur battery,it delivers large discharge capacity,excellent cycle stability,and good rate capability. The initial discharge capacity is up to 1040 m Ah/g at 0.1 C,the capacity can remain 537.8 m Ah/g at 0.2 C after 200 cycles,even at a higher rate of 1 C,the specific capacity still reaches 566.5 m Ah/g. The good electrochemical performance is attributed to the unique structure of S@PPy/GS,which can not only provide an excellent transport of lithium and electron ions within the electrodes,but also retard the shuttle effect of soluble lithium polysulfides effectively,thus plays a positive role in building better lithium-sulfur batteries.
基金supported by the National Natural Science Foundation of China (Nos. 21676106 and 21576101)Science and Technology Program of Guangzhou (201704030065)+1 种基金Science and Technology Program of Guangdong (2017A050506015)the Fundamental Research Funds for the Central Universities
文摘Polymer electrolyte membrane fuel cells(PEMFCs), as an energy conversion technology, have attracted extensive attention due to their high conversion efficiency, low emission, high energy density,and fast fuel charging [1,2]. Pt-based catalysts have been acknowledged to be the most effective catalyst for the oxygen reduction reaction(ORR) [3–5]. However, both the source scarcity and high cost of Pt severely hinder the commercial application of the PEMFCs [1,6,7].
