With the development of computer technology, Computer-Aided Translation(CAT) is widely used in the translation process, thus increasing the efficiency of the entire translation work. The purpose of this article is to ...With the development of computer technology, Computer-Aided Translation(CAT) is widely used in the translation process, thus increasing the efficiency of the entire translation work. The purpose of this article is to analyze the importance of introducing CAT technology into translation teaching and explore some ways of integrating CAT technology with translation teaching, so as to improve the quality of the translators and the translation work.展开更多
This article begins with a brief analysis of the significance of translation technology in different spheres of modern life,followed by a distinction between machine translation(MT)and computer-aided translation(CAT)....This article begins with a brief analysis of the significance of translation technology in different spheres of modern life,followed by a distinction between machine translation(MT)and computer-aided translation(CAT).It then describes some translation resources and tools and examines the negative and positive aspects of computer-aided translations.Finally it comes to a conclusion that it would be greatly efficient and productive for the translators to acquire the new skills in the translation workplace.展开更多
Objective To evaluate and reduce inter-observer variations in the detection and characterization of pulmonary nodules on digital radiograph （DR） chest images. Methods Two hundreds and thirty-two new posterior-anteri...Objective To evaluate and reduce inter-observer variations in the detection and characterization of pulmonary nodules on digital radiograph （DR） chest images. Methods Two hundreds and thirty-two new posterior-anterior DR chest images were collected from out-patient screening patients. Consensus was reached by two experienced radiologists on the marking, rating, and segmentation of small actionable nodules ranged from 5 to 15 mm in diameter using a computer-aided diagnosis （CAD） system. Both their own nodule findings and the computer＇s automatic nodule detection results were analyzed to make the consensus. Nodules identified together with corresponding likelihood rating and segmentation results were referred as ＂Gold Stand- ard＂. Two un-experienced radiologists were asked to first mark and characterize suspicious nodules independently, then were allowed to consult the computer nodule detection results and change their decisions. Results Large inter-observer variations in pulmonary nodule identification and characterization on DR chest images were observed between un-experienced radiologists. Un-expefienced radiologists could greatly benefit from the CAD system, including substantial decrease of inter-observer variation and improvement of nodule detection rates. Moreover, radiologists with different levels of skillfulness could achieve similar high level performance after using the CAD system. Conclusion The CAD system shows a high potential for providing a valuable assistance to the examination of DR chest images.展开更多
The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive positi...The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive position of the Si Ge HBT device is the emitter center, where the protons pass through the larger collector-substrate(CS) junction. Furthermore, in this work the experimental studies are also carried out by using 100-Me V proton. In order to consider the influence of temperature on SEE, both simulation and experiment are conducted at a temperature of 93 K. At a cryogenic temperature, the carrier mobility increases, which leads to higher transient current peaks, but the duration of the current decreases significantly.Notably, at the same proton flux, there is only one single event transient(SET) that occurs at 93 K. Thus, the radiation hard ability of the device increases at cryogenic temperatures. The simulation results are found to be qualitatively consistent with the experimental results of 100-Me V protons. To further evaluate the tolerance of the device, the influence of proton on Si Ge HBT after gamma-ray(^(60)Coγ) irradiation is investigated. As a result, as the cumulative dose increases, the introduction of traps results in a significant reduction in both the peak value and duration of the transient currents.展开更多
To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the c...To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.展开更多
In the field of neutronics analysis, it is imperative to develop computer-aided modeling technology for Monte Carlo codes to address the increasing complexity of reactor core components by converting 3D CAD model(boun...In the field of neutronics analysis, it is imperative to develop computer-aided modeling technology for Monte Carlo codes to address the increasing complexity of reactor core components by converting 3D CAD model(boundary representation, BREP) to MC model(constructive solid geometry, CSG). Separation-based conversion from BREP to CSG is widely used in computer-aided modeling MC codes because of its high efficiency, reliability, and easy implementation. However, the current separation-based BREP-CSG conversion is poor for processing complex CAD models, and it is necessary to divide a complex model into several simple models before applying the separation-based conversion algorithm, which is time-consuming and tedious. To avoid manual segmentation, this study proposed a MeshCNN-based 3D-shape segmentation algorithm to automatically separate a complex model. The proposed 3D-shape segmentation algorithm was combined with separation-based BREP-CSG conversion algorithms to directly convert complex models.The proposed algorithm was integrated into the computeraided modeling software cosVMPT and validated using the Chinese fusion engineering testing reactor model. The results demonstrate that the MeshCNN-based BREP-CSG conversion algorithm has a better performance and higher efficiency, particularly in terms of CPU time, and the conversion result is more intuitive and consistent with the intention of the modeler.展开更多
In this study, numerical optimisation and experimental validation of a divided rail freight brake disc crown made of grey cast iron EN-GJL-250 is presented.The analysed brake disc is used in rail freight wagons and po...In this study, numerical optimisation and experimental validation of a divided rail freight brake disc crown made of grey cast iron EN-GJL-250 is presented.The analysed brake disc is used in rail freight wagons and possesses a load capacity of 22.5 tons per axle. Two of the divided rail freight brake discs are mounted on each axle.With the aid of numerical analysis, the thermal dissipation properties of the brake disc were optimised and ventilation losses were reduced, and the numerical results were compared with experimental results. A one-way fluid–structure interaction analysis was performed. A computational fluid dynamic model of a divided rail freight brake disc, used to predict air flow properties and heat convection, was incorporated into a finite element model of the disc and used to evaluate the temperature of the disc. A numerical parametrical optimisation of cooling ribs of the brake disc was also performed, and novel optimised cooling ribs were developed. A transient thermal numerical analysis of the brake disc was validated using temperature measurements obtained during a braking test on a test bench. The ventilation losses of the brake disc were measured on a test bench specifically designed for the task, and the losses were compared to the simulation results. The experimentally obtained ventilation losses and temperature measurements compared favourably with the simulation results, confirming that this type of simulation process may be confidently applied in the future. Through systematic optimisation of the divided rail freight brake disc, ventilation losses were reduced by 37% and the mass was reduced by 21%, resulting in better thermal performance that will bring with it substantial energy savings.展开更多
The selection of phase change material(PCM)plays an important role in developing high-efficient thermal energy storage(TES)processes.Ionic liquids(ILs)or organic salts are thermally stable,non-volatile,and non-flammab...The selection of phase change material(PCM)plays an important role in developing high-efficient thermal energy storage(TES)processes.Ionic liquids(ILs)or organic salts are thermally stable,non-volatile,and non-flammable.Importantly,researchers have proved that some ILs possess higher latent heat of fusion than conventional PCMs.Despite these attractive characteristics,yet surprisingly,little research has been performed to the systematic selection or structural design of ILs for TES.Besides,most of the existing work is only focused on the latent heat when selecting PCMs.However,one should note that other properties such as heat capacity and thermal conductivity could affect the TES performance as well.In this work,we propose a computer-aided molecular design(CAMD)based method to systematically design IL PCMs for a practical TES process.The effects of different IL properties are simultaneously captured in the IL property models and TES process models.Optimal ILs holding a best compromise of all the properties are identified through the solution of a formulated CAMD problem where the TES performance of the process is maximized.[MPyEtOH][TfO]is found to be the best material and excitingly,the identified top nine ILs all show a higher TES performance than the traditional PCM paraffin wax at 10 h thermal charging time.展开更多
Displacement damage effects on the charge-coupled device(CCD)induced by neutrons at the back-streaming white neutron source(Back-n)in the China Spallation Neutron Source(CSNS)are analyzed according to an online irradi...Displacement damage effects on the charge-coupled device(CCD)induced by neutrons at the back-streaming white neutron source(Back-n)in the China Spallation Neutron Source(CSNS)are analyzed according to an online irradiation experiment.The hot pixels,random telegraph signal(RTS),mean dark signal,dark current and dark signal non-uniformity(DSNU)induced by Back-n are presented.The dark current is calculated according to the mean dark signal at various integration times.The single-particle displacement damage and transient response are also observed based on the online measurement data.The trends of hot pixels,mean dark signal,DSNU and RTS degradation are related to the integration time and irradiation fluence.The mean dark signal,dark current and DSNU2 are nearly linear with neutron irradiation fluence when nearly all the pixels do not reach saturation.In addition,the mechanisms of the displacement damage effects on the CCD are demonstrated by combining the experimental results and technology computer-aided design(TCAD)simulation.Radiation-induced traps in the space charge region of the CCD will act as generation/recombination centers of electron-hole pairs,leading to an increase in the dark signal.展开更多
The n-type silicon integrated-back contact（IBC） solar cell has attracted much attention due to its high efficiency,whereas its performance is very sensitive to the wafer of low quality or the contamination during hi...The n-type silicon integrated-back contact（IBC） solar cell has attracted much attention due to its high efficiency,whereas its performance is very sensitive to the wafer of low quality or the contamination during high temperature fabrication processing, which leads to low bulk lifetime τbulk. In order to clarify the influence of bulk lifetime on cell characteristics, two-dimensional（2D） TCAD simulation, combined with our experimental data, is used to simulate the cell performances, with the wafer thickness scaled down under various τbulk conditions. The modeling results show that for the IBC solar cell with high τbulk,（such as 1 ms-2 ms）, its open-circuit voltage V oc almost remains unchanged, and the short-circuit current density J sc monotonically decreases as the wafer thickness scales down. In comparison, for the solar cell with low τbulk（for instance, 〈 500 μs） wafer or the wafer contaminated during device processing, the V oc increases monotonically but the J sc first increases to a maximum value and then drops off as the wafer＇s thickness decreases. A model combing the light absorption and the minority carrier diffusion is used to explain this phenomenon. The research results show that for the wafer with thinner thickness and high bulk lifetime, the good light trapping technology must be developed to offset the decrease in J sc.展开更多
Objective We developed a universal lesion detector(ULDor)which showed good performance in in-lab experiments.The study aims to evaluate the performance and its ability to generalize in clinical setting via both extern...Objective We developed a universal lesion detector(ULDor)which showed good performance in in-lab experiments.The study aims to evaluate the performance and its ability to generalize in clinical setting via both external and internal validation.Methods The ULDor system consists of a convolutional neural network(CNN)trained on around 80 K lesion annotations from about 12 K CT studies in the DeepLesion dataset and 5 other public organ-specific datasets.During the validation process,the test sets include two parts:the external validation dataset which was comprised of 164 sets of non-contrasted chest and upper abdomen CT scans from a comprehensive hospital,and the internal validation dataset which was comprised of 187 sets of low-dose helical CT scans from the National Lung Screening Trial(NLST).We ran the model on the two test sets to output lesion detection.Three board-certified radiologists read the CT scans and verified the detection results of ULDor.We used positive predictive value(PPV)and sensitivity to evaluate the performance of the model in detecting space-occupying lesions at all extra-pulmonary organs visualized on CT images,including liver,kidney,pancreas,adrenal,spleen,esophagus,thyroid,lymph nodes,body wall,thoracic spine,etc.Results In the external validation,the lesion-level PPV and sensitivity of the model were 57.9%and 67.0%,respectively.On average,the model detected 2.1 findings per set,and among them,0.9 were false positives.ULDor worked well for detecting liver lesions,with a PPV of 78.9%and a sensitivity of 92.7%,followed by kidney,with a PPV of 70.0%and a sensitivity of 58.3%.In internal validation with NLST test set,ULDor obtained a PPV of 75.3%and a sensitivity of 52.0%despite the relatively high noise level of soft tissue on images.Conclusions The performance tests of ULDor with the external real-world data have shown its high effectiveness in multiple-purposed detection for lesions in certain organs.With further optimisation and iterative upgrades,ULDor may be well suited for extensive application to external data.展开更多
This paper presents an investigation into the impact of proton-induced alteration of carrier lifetime on the singleevent transient(SET) caused by heavy ions in silicon–germanium heterojunction bipolar transistor(SiGe...This paper presents an investigation into the impact of proton-induced alteration of carrier lifetime on the singleevent transient(SET) caused by heavy ions in silicon–germanium heterojunction bipolar transistor(SiGe HBT).The ioninduced current transients and integrated charge collections under different proton fluences are obtained based on technology computer-aided design(TCAD) simulation.The results indicate that the impact of carrier lifetime alteration is determined by the dominating charge collection mechanism at the ion incident position and only the long-time diffusion process is affected.With a proton fluence of 5 × 1013 cm-2, almost no change is found in the transient feature, and the charge collection of events happened in the region enclosed by deep trench isolation(DTI), where prompt funneling collection is the dominating mechanism.Meanwhile, for the events happening outside DTI where diffusion dominates the collection process, the peak value and the duration of the ion-induced current transient both decrease with increasing proton fluence, leading to a great decrease in charge collection.展开更多
It is important to know whether the laws or phenomena in statistical physics for natural systems with non-adaptive agents still hold for social human systems with adaptive agents, because this implies whether it is po...It is important to know whether the laws or phenomena in statistical physics for natural systems with non-adaptive agents still hold for social human systems with adaptive agents, because this implies whether it is possible to study or understand social human systems by using statistical physics originating from natural systems. For this purpose, we review the role of human adaptability in four kinds of specific human behaviors, namely, normal behavior, herd behavior, contrarian behavior, and hedge behavior. The approach is based on controlled experiments in the framework of market-directed resource-allocation games. The role of the controlled experiments could be at least two-fold： adopting the real human decision-making process so that the system under consideration could reflect the performance of genuine human beings; making it possible to obtain macroscopic physical properties of a human system by tuning a particular factor of the system, thus directly revealing cause and effect. As a result, both computer simulations and theoretical analyses help to show a few counterparts of some laws or phenomena in statistical physics for social human systems： two-phase phenomena or phase transitions, entropy-related phenomena, and a non-equilibrium steady state. This review highlights the role of human adaptability in these counterparts, and makes it possible to study or understand some particular social human systems by means of statistical physics coming from natural systems.展开更多
A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented f...A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.展开更多
Objective: To design and test the accuracy and efficiency of our lung segmentation algorithm on thoracic CT image in computer-aided diagnostic (CAD) system, especially on the segmentation between left and right lungs....Objective: To design and test the accuracy and efficiency of our lung segmentation algorithm on thoracic CT image in computer-aided diagnostic (CAD) system, especially on the segmentation between left and right lungs. Methods: We put forward the base frame of our lung segmentation firstly. Then, using optimal thresholding and mathematical morphologic methods, we acquired the rough image of lung segmentation. Finally, we presented a fast self-fit segmentation refinement algorithm, adapting to the unsuccessful left-right lung segmentation of thredsholding. Then our algorithm was used to CT scan images of 30 patients and the results were compared with those made by experts. Results: Experiments on clinical 2-D pulmonary images showed the results of our algorithm were very close to the expert’s manual outlines, and it was very effective for the separation of left and right lungs with a successful segmentation ratio 94.8%. Conclusion: It is a practicable fast lung segmentation algorithm for CAD system on thoracic CT image.展开更多
With technology computer-aided design(TCAD)simulation software,we design a new structure of gallium oxide on gallium-nitride Schottky barrier diode(SBD).The parameters of gallium oxide are defined as new material para...With technology computer-aided design(TCAD)simulation software,we design a new structure of gallium oxide on gallium-nitride Schottky barrier diode(SBD).The parameters of gallium oxide are defined as new material parameters in the material library,and the SBD turn-on and breakdown behavior are simulated.The simulation results reveal that this new structure has a larger turn-on current than Ga2O3 SBD and a larger breakdown voltage than Ga N SBD.Also,to solve the lattice mismatch problem in the real epitaxy,we add a Zn O layer as a transition layer.The simulations show that the device still has good properties after adding this layer.展开更多
For an SOI-FPGA （silicon-on-insulator field programmable gate arrays） （VS1000） fabricated with 0.5 ttm SOI-CMOS （silicon-on-insulator complementary-metal-oxide-semiconductor） process, a complete integrated platf...For an SOI-FPGA （silicon-on-insulator field programmable gate arrays） （VS1000） fabricated with 0.5 ttm SOI-CMOS （silicon-on-insulator complementary-metal-oxide-semiconductor） process, a complete integrated platform of FPGA computer-aided design （CAD） toolset （VDK） is developed, which can convert the Verilog HDL （hardware description language） description into a bitstream and finally download it into an FPGA. Experiments and testing verify that this FPGA CAD works well and efficiently.展开更多
With the rapid development of translation technology, great changes have taken place in translation teaching. The traditional translation teaching can not meet the needs of the market, and the market is in urgent need...With the rapid development of translation technology, great changes have taken place in translation teaching. The traditional translation teaching can not meet the needs of the market, and the market is in urgent need of translators who are proficient in information technology. Therefore, translation memory is gradually applied to translation teaching. Translation teaching has been liberated by translation memory to some extent. And translation memory makes translation teaching avoid a lot of repeated knowledge and processes of translation. It is no doubt that translation memory has some limitations. As a result, the advantages and limitations of translation memory in translation teaching are discussed.展开更多
文摘With the development of computer technology, Computer-Aided Translation(CAT) is widely used in the translation process, thus increasing the efficiency of the entire translation work. The purpose of this article is to analyze the importance of introducing CAT technology into translation teaching and explore some ways of integrating CAT technology with translation teaching, so as to improve the quality of the translators and the translation work.
文摘This article begins with a brief analysis of the significance of translation technology in different spheres of modern life,followed by a distinction between machine translation(MT)and computer-aided translation(CAT).It then describes some translation resources and tools and examines the negative and positive aspects of computer-aided translations.Finally it comes to a conclusion that it would be greatly efficient and productive for the translators to acquire the new skills in the translation workplace.
文摘Objective To evaluate and reduce inter-observer variations in the detection and characterization of pulmonary nodules on digital radiograph （DR） chest images. Methods Two hundreds and thirty-two new posterior-anterior DR chest images were collected from out-patient screening patients. Consensus was reached by two experienced radiologists on the marking, rating, and segmentation of small actionable nodules ranged from 5 to 15 mm in diameter using a computer-aided diagnosis （CAD） system. Both their own nodule findings and the computer＇s automatic nodule detection results were analyzed to make the consensus. Nodules identified together with corresponding likelihood rating and segmentation results were referred as ＂Gold Stand- ard＂. Two un-experienced radiologists were asked to first mark and characterize suspicious nodules independently, then were allowed to consult the computer nodule detection results and change their decisions. Results Large inter-observer variations in pulmonary nodule identification and characterization on DR chest images were observed between un-experienced radiologists. Un-expefienced radiologists could greatly benefit from the CAD system, including substantial decrease of inter-observer variation and improvement of nodule detection rates. Moreover, radiologists with different levels of skillfulness could achieve similar high level performance after using the CAD system. Conclusion The CAD system shows a high potential for providing a valuable assistance to the examination of DR chest images.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.61574171,61704127,11875229,51872251,and 12027813)。
文摘The single event effect(SEE) sensitivity of silicon–germanium heterojunction bipolar transistor(Si Ge HBT) irradiated by 100-Me V proton is investigated. The simulation results indicate that the most sensitive position of the Si Ge HBT device is the emitter center, where the protons pass through the larger collector-substrate(CS) junction. Furthermore, in this work the experimental studies are also carried out by using 100-Me V proton. In order to consider the influence of temperature on SEE, both simulation and experiment are conducted at a temperature of 93 K. At a cryogenic temperature, the carrier mobility increases, which leads to higher transient current peaks, but the duration of the current decreases significantly.Notably, at the same proton flux, there is only one single event transient(SET) that occurs at 93 K. Thus, the radiation hard ability of the device increases at cryogenic temperatures. The simulation results are found to be qualitatively consistent with the experimental results of 100-Me V protons. To further evaluate the tolerance of the device, the influence of proton on Si Ge HBT after gamma-ray(^(60)Coγ) irradiation is investigated. As a result, as the cumulative dose increases, the introduction of traps results in a significant reduction in both the peak value and duration of the transient currents.
文摘To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.
基金supported by the National Key R&D Program of China(Nos.2019YFE03110000 and 2017YFE0300501)the Chinese National Natural Science Foundation(No.11775256)。
文摘In the field of neutronics analysis, it is imperative to develop computer-aided modeling technology for Monte Carlo codes to address the increasing complexity of reactor core components by converting 3D CAD model(boundary representation, BREP) to MC model(constructive solid geometry, CSG). Separation-based conversion from BREP to CSG is widely used in computer-aided modeling MC codes because of its high efficiency, reliability, and easy implementation. However, the current separation-based BREP-CSG conversion is poor for processing complex CAD models, and it is necessary to divide a complex model into several simple models before applying the separation-based conversion algorithm, which is time-consuming and tedious. To avoid manual segmentation, this study proposed a MeshCNN-based 3D-shape segmentation algorithm to automatically separate a complex model. The proposed 3D-shape segmentation algorithm was combined with separation-based BREP-CSG conversion algorithms to directly convert complex models.The proposed algorithm was integrated into the computeraided modeling software cosVMPT and validated using the Chinese fusion engineering testing reactor model. The results demonstrate that the MeshCNN-based BREP-CSG conversion algorithm has a better performance and higher efficiency, particularly in terms of CPU time, and the conversion result is more intuitive and consistent with the intention of the modeler.
基金supported by the European Union’s Horizon 2020 researchinnovation programme FUTURA under Grant Agreement No. 700985
文摘In this study, numerical optimisation and experimental validation of a divided rail freight brake disc crown made of grey cast iron EN-GJL-250 is presented.The analysed brake disc is used in rail freight wagons and possesses a load capacity of 22.5 tons per axle. Two of the divided rail freight brake discs are mounted on each axle.With the aid of numerical analysis, the thermal dissipation properties of the brake disc were optimised and ventilation losses were reduced, and the numerical results were compared with experimental results. A one-way fluid–structure interaction analysis was performed. A computational fluid dynamic model of a divided rail freight brake disc, used to predict air flow properties and heat convection, was incorporated into a finite element model of the disc and used to evaluate the temperature of the disc. A numerical parametrical optimisation of cooling ribs of the brake disc was also performed, and novel optimised cooling ribs were developed. A transient thermal numerical analysis of the brake disc was validated using temperature measurements obtained during a braking test on a test bench. The ventilation losses of the brake disc were measured on a test bench specifically designed for the task, and the losses were compared to the simulation results. The experimentally obtained ventilation losses and temperature measurements compared favourably with the simulation results, confirming that this type of simulation process may be confidently applied in the future. Through systematic optimisation of the divided rail freight brake disc, ventilation losses were reduced by 37% and the mass was reduced by 21%, resulting in better thermal performance that will bring with it substantial energy savings.
基金the financial support from Max Planck Society,Germany,for the Computer-Aided Material and Process Design(CAMPD)project
文摘The selection of phase change material(PCM)plays an important role in developing high-efficient thermal energy storage(TES)processes.Ionic liquids(ILs)or organic salts are thermally stable,non-volatile,and non-flammable.Importantly,researchers have proved that some ILs possess higher latent heat of fusion than conventional PCMs.Despite these attractive characteristics,yet surprisingly,little research has been performed to the systematic selection or structural design of ILs for TES.Besides,most of the existing work is only focused on the latent heat when selecting PCMs.However,one should note that other properties such as heat capacity and thermal conductivity could affect the TES performance as well.In this work,we propose a computer-aided molecular design(CAMD)based method to systematically design IL PCMs for a practical TES process.The effects of different IL properties are simultaneously captured in the IL property models and TES process models.Optimal ILs holding a best compromise of all the properties are identified through the solution of a formulated CAMD problem where the TES performance of the process is maximized.[MPyEtOH][TfO]is found to be the best material and excitingly,the identified top nine ILs all show a higher TES performance than the traditional PCM paraffin wax at 10 h thermal charging time.
基金Project supported by the Foundation of State Key Laboratory of China(Grant Nos.SKLIPR1903Z,1803)the National Natural Science Foundation of China(Grant Nos.U2167208 and 11875223).
文摘Displacement damage effects on the charge-coupled device(CCD)induced by neutrons at the back-streaming white neutron source(Back-n)in the China Spallation Neutron Source(CSNS)are analyzed according to an online irradiation experiment.The hot pixels,random telegraph signal(RTS),mean dark signal,dark current and dark signal non-uniformity(DSNU)induced by Back-n are presented.The dark current is calculated according to the mean dark signal at various integration times.The single-particle displacement damage and transient response are also observed based on the online measurement data.The trends of hot pixels,mean dark signal,DSNU and RTS degradation are related to the integration time and irradiation fluence.The mean dark signal,dark current and DSNU2 are nearly linear with neutron irradiation fluence when nearly all the pixels do not reach saturation.In addition,the mechanisms of the displacement damage effects on the CCD are demonstrated by combining the experimental results and technology computer-aided design(TCAD)simulation.Radiation-induced traps in the space charge region of the CCD will act as generation/recombination centers of electron-hole pairs,leading to an increase in the dark signal.
基金Project supported by the Chinese Ministry of Science and Technology Projects(Grant Nos.2012AA050304 and Y0GZ124S01)the National Natural Science Foundation of China(Grant Nos.11104319,11274346,51202285,51402347,and 51172268)the Fund of the Solar Energy Action Plan from the Chinese Academy of Sciences(Grant Nos.Y3ZR044001 and Y2YF014001)
文摘The n-type silicon integrated-back contact（IBC） solar cell has attracted much attention due to its high efficiency,whereas its performance is very sensitive to the wafer of low quality or the contamination during high temperature fabrication processing, which leads to low bulk lifetime τbulk. In order to clarify the influence of bulk lifetime on cell characteristics, two-dimensional（2D） TCAD simulation, combined with our experimental data, is used to simulate the cell performances, with the wafer thickness scaled down under various τbulk conditions. The modeling results show that for the IBC solar cell with high τbulk,（such as 1 ms-2 ms）, its open-circuit voltage V oc almost remains unchanged, and the short-circuit current density J sc monotonically decreases as the wafer thickness scales down. In comparison, for the solar cell with low τbulk（for instance, 〈 500 μs） wafer or the wafer contaminated during device processing, the V oc increases monotonically but the J sc first increases to a maximum value and then drops off as the wafer＇s thickness decreases. A model combing the light absorption and the minority carrier diffusion is used to explain this phenomenon. The research results show that for the wafer with thinner thickness and high bulk lifetime, the good light trapping technology must be developed to offset the decrease in J sc.
文摘Objective We developed a universal lesion detector(ULDor)which showed good performance in in-lab experiments.The study aims to evaluate the performance and its ability to generalize in clinical setting via both external and internal validation.Methods The ULDor system consists of a convolutional neural network(CNN)trained on around 80 K lesion annotations from about 12 K CT studies in the DeepLesion dataset and 5 other public organ-specific datasets.During the validation process,the test sets include two parts:the external validation dataset which was comprised of 164 sets of non-contrasted chest and upper abdomen CT scans from a comprehensive hospital,and the internal validation dataset which was comprised of 187 sets of low-dose helical CT scans from the National Lung Screening Trial(NLST).We ran the model on the two test sets to output lesion detection.Three board-certified radiologists read the CT scans and verified the detection results of ULDor.We used positive predictive value(PPV)and sensitivity to evaluate the performance of the model in detecting space-occupying lesions at all extra-pulmonary organs visualized on CT images,including liver,kidney,pancreas,adrenal,spleen,esophagus,thyroid,lymph nodes,body wall,thoracic spine,etc.Results In the external validation,the lesion-level PPV and sensitivity of the model were 57.9%and 67.0%,respectively.On average,the model detected 2.1 findings per set,and among them,0.9 were false positives.ULDor worked well for detecting liver lesions,with a PPV of 78.9%and a sensitivity of 92.7%,followed by kidney,with a PPV of 70.0%and a sensitivity of 58.3%.In internal validation with NLST test set,ULDor obtained a PPV of 75.3%and a sensitivity of 52.0%despite the relatively high noise level of soft tissue on images.Conclusions The performance tests of ULDor with the external real-world data have shown its high effectiveness in multiple-purposed detection for lesions in certain organs.With further optimisation and iterative upgrades,ULDor may be well suited for extensive application to external data.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11775167,61574171,11575138,and 11835006)
文摘This paper presents an investigation into the impact of proton-induced alteration of carrier lifetime on the singleevent transient(SET) caused by heavy ions in silicon–germanium heterojunction bipolar transistor(SiGe HBT).The ioninduced current transients and integrated charge collections under different proton fluences are obtained based on technology computer-aided design(TCAD) simulation.The results indicate that the impact of carrier lifetime alteration is determined by the dominating charge collection mechanism at the ion incident position and only the long-time diffusion process is affected.With a proton fluence of 5 × 1013 cm-2, almost no change is found in the transient feature, and the charge collection of events happened in the region enclosed by deep trench isolation(DTI), where prompt funneling collection is the dominating mechanism.Meanwhile, for the events happening outside DTI where diffusion dominates the collection process, the peak value and the duration of the ion-induced current transient both decrease with increasing proton fluence, leading to a great decrease in charge collection.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11075035 and 11222544)the Fok Ying Tung Education Foundation,China(Grant No. 131008)+2 种基金the Program for New Century Excellent Talents in University,China (Grant No. NCET-12-0121)the Shanghai Rising-Star Program,China(Grant No. 12QA1400200)the Fundamental Research Funds for the Central Universities,China
文摘It is important to know whether the laws or phenomena in statistical physics for natural systems with non-adaptive agents still hold for social human systems with adaptive agents, because this implies whether it is possible to study or understand social human systems by using statistical physics originating from natural systems. For this purpose, we review the role of human adaptability in four kinds of specific human behaviors, namely, normal behavior, herd behavior, contrarian behavior, and hedge behavior. The approach is based on controlled experiments in the framework of market-directed resource-allocation games. The role of the controlled experiments could be at least two-fold： adopting the real human decision-making process so that the system under consideration could reflect the performance of genuine human beings; making it possible to obtain macroscopic physical properties of a human system by tuning a particular factor of the system, thus directly revealing cause and effect. As a result, both computer simulations and theoretical analyses help to show a few counterparts of some laws or phenomena in statistical physics for social human systems： two-phase phenomena or phase transitions, entropy-related phenomena, and a non-equilibrium steady state. This review highlights the role of human adaptability in these counterparts, and makes it possible to study or understand some particular social human systems by means of statistical physics coming from natural systems.
文摘A simulation tool named BITSIM orienting production engineering is developed in order to improve enterprise＇s productivity and making up the scarcity of computer application. The architecture of BITSIM is presented first. Hierarchical technique, control strategy based on multi-agent and simulation output analysis are depicted in detail then. In the end, an application example is taken out to prove that this system could be used to analyzing different hypothetical situation and configuring the auxiliary manufacturing system before production.
基金the National Key Basic Research and Development Plan of China ("973" Projects, 2003CB716104)the Key Program of the National Natural Science Foundation of China (30730036)+1 种基金the Sci & Tech Planning Program of Guangdong Province (2007B010400058)the Sci & Tech Project Foundation of Guangzhou City (2007Z3-E0031)
文摘Objective: To design and test the accuracy and efficiency of our lung segmentation algorithm on thoracic CT image in computer-aided diagnostic (CAD) system, especially on the segmentation between left and right lungs. Methods: We put forward the base frame of our lung segmentation firstly. Then, using optimal thresholding and mathematical morphologic methods, we acquired the rough image of lung segmentation. Finally, we presented a fast self-fit segmentation refinement algorithm, adapting to the unsuccessful left-right lung segmentation of thredsholding. Then our algorithm was used to CT scan images of 30 patients and the results were compared with those made by experts. Results: Experiments on clinical 2-D pulmonary images showed the results of our algorithm were very close to the expert’s manual outlines, and it was very effective for the separation of left and right lungs with a successful segmentation ratio 94.8%. Conclusion: It is a practicable fast lung segmentation algorithm for CAD system on thoracic CT image.
文摘With technology computer-aided design(TCAD)simulation software,we design a new structure of gallium oxide on gallium-nitride Schottky barrier diode(SBD).The parameters of gallium oxide are defined as new material parameters in the material library,and the SBD turn-on and breakdown behavior are simulated.The simulation results reveal that this new structure has a larger turn-on current than Ga2O3 SBD and a larger breakdown voltage than Ga N SBD.Also,to solve the lattice mismatch problem in the real epitaxy,we add a Zn O layer as a transition layer.The simulations show that the device still has good properties after adding this layer.
文摘For an SOI-FPGA （silicon-on-insulator field programmable gate arrays） （VS1000） fabricated with 0.5 ttm SOI-CMOS （silicon-on-insulator complementary-metal-oxide-semiconductor） process, a complete integrated platform of FPGA computer-aided design （CAD） toolset （VDK） is developed, which can convert the Verilog HDL （hardware description language） description into a bitstream and finally download it into an FPGA. Experiments and testing verify that this FPGA CAD works well and efficiently.
文摘With the rapid development of translation technology, great changes have taken place in translation teaching. The traditional translation teaching can not meet the needs of the market, and the market is in urgent need of translators who are proficient in information technology. Therefore, translation memory is gradually applied to translation teaching. Translation teaching has been liberated by translation memory to some extent. And translation memory makes translation teaching avoid a lot of repeated knowledge and processes of translation. It is no doubt that translation memory has some limitations. As a result, the advantages and limitations of translation memory in translation teaching are discussed.
