The boundness and compactness of products of multiplication,composition and differentiation on weighted Bergman spaces in the unit ball are studied.We define the differentiation operator on the space of holomorphic fu...The boundness and compactness of products of multiplication,composition and differentiation on weighted Bergman spaces in the unit ball are studied.We define the differentiation operator on the space of holomorphic functions in the unit ball by radial derivative.Then we extend the Sharma's results.展开更多
An energetic binder based on hydroxyl-terminated polybutadiene(HTPB),doped with different ratios of nitrocellulose(NC)(10%,20%,30%,and 50%),was developed to study the effect of NC doping on the thermal decomposition b...An energetic binder based on hydroxyl-terminated polybutadiene(HTPB),doped with different ratios of nitrocellulose(NC)(10%,20%,30%,and 50%),was developed to study the effect of NC doping on the thermal decomposition behavior of a composite propellant(CP)comprising ammonium nitrate(AN)as an oxidizer and magnesium(Mg)as a fuel.Optimization of the propellant formulation was conducted using Chemical Equilibrium with Applications-National Aeronautics and Space Administration(CEA-NASA)software,which demonstrated an increase in specific impulse by 12.09 s when the binder contained 50%NC.Fourier-transform infrared spectroscopy(FTIR)analysis confirmed the excellent compatibility between the components,and density measurements revealed an increase of 6.4%with a higher NC content.Morphological analysis using optical microscopy showed that NC doping improved the uniformity and compactness of the surface,reduced cavities,and achieved a more homogeneous particle distribution.Differential scanning calorimetry(DSC)analysis indicated a decrease in the decomposition temperature of the propellant as the NC content increased,while kinetic studies revealed a 48.68%reduction in the activation energy when 50%NC was incorporated into the binder.These findings suggest that the addition of NC enhances combustion efficiency and improves overall propellant performance.This study highlights the potential of the new HTPB-NC energetic binder as a promising approach for advancing solid propellant technology.展开更多
Objective To establish a body composition analysis system based on chest CT,and to observe its value for evaluating content of chest muscle and adipose.Methods T7—T8 layer CT images of 108 pneumonia patients were col...Objective To establish a body composition analysis system based on chest CT,and to observe its value for evaluating content of chest muscle and adipose.Methods T7—T8 layer CT images of 108 pneumonia patients were collected(segmented dataset),and chest CT data of 984 patients were screened from the COVID 19-CT dataset(10 cases were randomly selected as whole test dataset,the remaining 974 cases were selected as layer selection dataset).T7—T8 layer was classified based on convolutional neural network(CNN)derived networks,including ResNet,ResNeXt,MobileNet,ShuffleNet,DenseNet,EfficientNet and ConvNeXt,then the accuracy,precision,recall and specificity were used to evaluate the performance of layer selection dataset.The skeletal muscle(SM),subcutaneous adipose tissue(SAT),intermuscular adipose tissue(IMAT)and visceral adipose tissue(VAT)were segmented using classical fully CNN(FCN)derived network,including FCN,SegNet,UNet,Attention UNet,UNET++,nnUNet,UNeXt and CMUNeXt,then Dice similarity coefficient(DSC),intersection over union(IoU)and 95 Hausdorff distance(HD)were used to evaluate the performance of segmented dataset.The automatic body composition analysis system was constructed based on optimal layer selection network and segmentation network,the mean absolute error(MAE),root mean squared error(RMSE)and standard deviation(SD)of MAE were used to evaluate the performance of automatic system for testing the whole test dataset.Results The accuracy,precision,recall and specificity of DenseNet network for automatically classifying T7—T8 layer from chest CT images was 95.06%,84.83%,92.27%and 95.78%,respectively,which were all higher than those of the other layer selection networks.In segmentation of SM,SAT,IMAT and overall,DSC and IoU of UNet++network were all higher,while 95HD of UNet++network were all lower than those of the other segmentation networks.Using DenseNet as the layer selection network and UNet++as the segmentation network,MAE of the automatic body composition analysis system for predicting SM,SAT,IMAT,VAT and MAE was 27.09,6.95,6.65 and 3.35 cm 2,respectively.Conclusion The body composition analysis system based on chest CT could be used to assess content of chest muscle and adipose.Among them,the UNet++network had better segmentation performance in adipose tissue than SM.展开更多
Water-based aerosol is widely used as an effective strategy in electro-optical countermeasure on the battlefield used to the preponderance of high efficiency,low cost and eco-friendly.Unfortunately,the stability of th...Water-based aerosol is widely used as an effective strategy in electro-optical countermeasure on the battlefield used to the preponderance of high efficiency,low cost and eco-friendly.Unfortunately,the stability of the water-based aerosol is always unsatisfactory due to the rapid evaporation and sedimentation of the aerosol droplets.Great efforts have been devoted to improve the stability of water-based aerosol by using additives with different composition and proportion.However,the lack of the criterion and principle for screening the effective additives results in excessive experimental time consumption and cost.And the stabilization time of the aerosol is still only 30 min,which could not meet the requirements of the perdurable interference.Herein,to improve the stability of water-based aerosol and optimize the complex formulation efficiently,a theoretical calculation method based on thermodynamic entropy theory is proposed.All the factors that influence the shielding effect,including polyol,stabilizer,propellant,water and cosolvent,are considered within calculation.An ultra-stable water-based aerosol with long duration over 120 min is obtained with the optimal fogging agent composition,providing enough time for fighting the electro-optic weapon.Theoretical design guideline for choosing the additives with high phase transition temperature and low phase transition enthalpy is also proposed,which greatly improves the total entropy change and reduce the absolute entropy change of the aerosol cooling process,and gives rise to an enhanced stability of the water-based aerosol.The theoretical calculation methodology contributes to an abstemious time and space for sieving the water-based aerosol with desirable performance and stability,and provides the powerful guarantee to the homeland security.展开更多
This study was to investigate the effects of three exogenous substances on chemical constituents of Isatis indigotica leavesand their efficacy in alleviating drought stress, and explore the methods of applying exogeno...This study was to investigate the effects of three exogenous substances on chemical constituents of Isatis indigotica leavesand their efficacy in alleviating drought stress, and explore the methods of applying exogenous substances to efficient cultivationof Isatis indigotica. Polyethylene glycol (PEG) was used to simulate drought stress to deal with seeds of Isatis indigotica at thegermination stage (concentration: 0, 10%, 15%, and 20%). Simultaneous operation of exogenous growth regulators [microbialinoculum (MI), γ-aminobutyric acid (GABA) and salicylic acid (SA)] and PEG were implemented in seeds of Isatis indigotica.The effects of drought stress and the mitigation of exogenous substances were observed by statistics of seed germination potential,germination rate, hypocotyl length, and radicle length of each treatment. The effects of exogenous substances on the content ofalkaloids, crude protein and free amino acids in the leaves of Isatis indigotica grown in a greenhouse were determined after sprayingexogenous substances on the plants. The differences of germination potential, germination rate, hypocotyl length, and radicle lengthamong 15% PEG stress treatment, 10% PEG stress treatment and the control were significant (P<0.05). According to the predesignedgermination standard, the seeds did not germinate under 20% PEG stress treatment. When the PEG concentration was 15%, the resultsof seed germination potential and germination rate after adding MI were significantly different from those under stress alone (P<0.05).When exposed to 10% PEG stress, the supplementation of GABA led to a notable increase in radicle length of Isatis indigotica seeds,showing significant differences compared to other three treatments. The application of MI and GABA under 15% PEG stress resultedin a significant increase in the radicle and hypocotyl length of Isatis indigotica seeds compared to other two treatments. The contentof the total alkaloids in leaves of Isatis indigotica was significantly increased after spraying GABA. Meanwhile, the contents of crudeprotein and the total free amino acids were kept constant after spraying exogenous substances. Application of MI and GABA couldalleviate drought stress of Isatis indigotica. The content of the total alkaloids in leaves of Isatis indigotica could significantly increaseafter spraying GABA.展开更多
To improve the performance of solid composite propellants(SCPs)supplemented with ammonium nitrate(AN)as an oxidizer,the incorporation of energetic ingredients such as explosives,energetic binders or catalysts is a com...To improve the performance of solid composite propellants(SCPs)supplemented with ammonium nitrate(AN)as an oxidizer,the incorporation of energetic ingredients such as explosives,energetic binders or catalysts is a common effective approach.For this purpose,polyurethane(PU),a typical inert binder,was mixed with nitrocellulose(NC)as an energetic polymer.Numerous composite solid propellant compositions based on AN and NC-modified polyurethane binder with different NC ratios were prepared.The prepared formulations were characterized using Fourier transform infrared spectroscopy(FTIR),RAMAN spectroscopy,X-ray diffraction(XRD),electron densimetry,thermogravimetric(TG)analysis,and differential scanning calorimetry(DSC).A kinetic study was then performed using the iterative KissingerAkahira-Sunose(It-KAS),Flynn-Wall-Ozawa(It-FWO),and non-linear Vyazovkin integral with compensation effect(VYA/CE)methods.The theoretical performances,such as theoretical specific impulse,adiabatic flame temperature,and ideal exhaust gaseous species,were also determined using the NASA Lewis Code,Chemical Equilibrium with Application(CEA).Spectroscopic examinations revealed the existence of NC and full polymerization of PU in the prepared propellants.According to density tests,the density of the propellant increases as the nitrocellulose component increases.According to the thermal analysis and kinetics study,the increase in NC content catalyzed the thermal decomposition of the AN-based composite solid propellants.Based on the theoretical study,increasing the amount of NC in the propellant increased the specific impulse and,as a result,the overall performance.展开更多
The purpose of this paper is to study the construction of concept lattice from variable formal contexts.Composition and decomposition theories are proposed for the unraveling of concept lattice from contexts with vari...The purpose of this paper is to study the construction of concept lattice from variable formal contexts.Composition and decomposition theories are proposed for the unraveling of concept lattice from contexts with variable attribute set in the process of information updating.The relationship between the extension sets of the original context and that of its sub-context is analyzed.The composition and decomposition theories are then generalized to the situation involving more than two sub-contexts and the situation with variable attribute set and object set.展开更多
Based on the deficiency of time convergence and variability of Web services selection for services composition supporting cross-enterprises collaboration,an algorithm QCDSS(QoS constraints of dynamic Web services sele...Based on the deficiency of time convergence and variability of Web services selection for services composition supporting cross-enterprises collaboration,an algorithm QCDSS(QoS constraints of dynamic Web services selection)to resolve dynamic Web services selection with QoS global optimal path,was proposed.The essence of the algorithm was that the problem of dynamic Web services selection with QoS global optimal path was transformed into a multi-objective services composition optimization problem with QoS constraints.The operations of the cross and mutation in genetic algorithm were brought into PSOA(particle swarm optimization algorithm),forming an improved algorithm(IPSOA)to solve the QoS global optimal problem.Theoretical analysis and experimental results indicate that the algorithm can better satisfy the time convergence requirement for Web services composition supporting cross-enterprises collaboration than the traditional algorithms.展开更多
According to the statistic analysis,the reserve of manganese in electrolytic manganese residue deposit is over 780 kt. The average contents of available manganese and ammonium reach 3.90% and 1.68% (mass fraction),res...According to the statistic analysis,the reserve of manganese in electrolytic manganese residue deposit is over 780 kt. The average contents of available manganese and ammonium reach 3.90% and 1.68% (mass fraction),respectively. Large amount of manganese compounds and ammonium sulfate are detruded without any treatment or recovery. The compositions of the main elements in electrolytic manganese residue were analyzed comprehensively based on the extensive research data. According to the new development of electrolytic manganese residue comprehensively used in recent years,a water washing residue-twice precipitation process was also proposed. The experimental results indicate that manganese dioxide silicon dioxide and calcium sulfate are presented as amorphous state in the manganese residues. The recovery rates of manganese and nitrogen reach up to 99.5% and 94.5 %,respectively. The recovery process can be easily implemented,environment-friendly and fitting for industrial production.展开更多
The kinetics of the thermal decomposition for a naturally ageing ammonium perchlorate(AP) and hydroxyl-terminated-polybutadiene(HTPB) base bleed composite propellant were investigated using a differential scanning cal...The kinetics of the thermal decomposition for a naturally ageing ammonium perchlorate(AP) and hydroxyl-terminated-polybutadiene(HTPB) base bleed composite propellant were investigated using a differential scanning calorimetry(DSC). The naturally ageing AP/HTPB base bleed propellant samples have been stored in a sealed plastic bag at room temperature(5-25 ℃) for more than 20 years. The experimental DSC results were obtained by placing samples(each about 1.5 mg) in a sealed pan under non-isothermal condition under different heating rates, 5.0, 10.0, 15.0, 20.0 and 30.0 ℃·min^(-1). The activation energy and pre-exponential factor were estimated based on the relationship between the exothermic peak temperature and the heating rate by Ozawa and Kissinger methods, respectively. The decomposition kinetic parameters is lower the values under laboratorial aging condition.展开更多
The influence of chemical composition on corrosion resistance of AZ91D magnesium alloys ingots has been investigated. Mass loss method was applied to evaluate the corrosion resistance of AZ91D alloys and the data were...The influence of chemical composition on corrosion resistance of AZ91D magnesium alloys ingots has been investigated. Mass loss method was applied to evaluate the corrosion resistance of AZ91D alloys and the data were analyzed by multiple regression. The results show that the corrosion resistance of this alloy can be improved by increasing Al, Zn and Mn in a certain degree, and will drop with increasing Si and heavy metals (Fe, Cu, Ni). It is found that ingots received from company F should be listed into unusable materials in terms of the corrosion resistance, while among the five suppliers, the only local company E supplied excellent AZ91D magnesium alloy ingots with the best corrosion resistance.展开更多
Source apportionment of particulate matters with aerodynamic diameter less than 10 μm (PM10) was conducted in the suburban area of Changsha, China. PM10 samples for 24 h collected with TEOM 1400a and ACCU system in...Source apportionment of particulate matters with aerodynamic diameter less than 10 μm (PM10) was conducted in the suburban area of Changsha, China. PM10 samples for 24 h collected with TEOM 1400a and ACCU system in July and October 2008 were chemically analyzed by the wavelength dispersive X-ray fluorescence (WD-XRF). Source appointment was implemented by the principal component analysis/absolute principal component analysis (PCA/APCA) to identify the possible sources and to quantify the contributions of the sources to PM10. Results show that as the PM10 concentration is increased from (85.6±43.7) μg/m3 in July 2008 to (107.6±35.7) μg/m^3 in October 2008, the concentrations of the anthropogenic elements (P, S, C1, K, Mn, Ni, Cu, Zn, and Pb) are basically increased but concentrations of the natural elements (Na, Mg, Al, Si, Ca, Ti, and Fe) are essentially decreased. Six main sources of PM10 are identified in the suburban of Changsha, China: soil dust, secondary aerosols, domestic oil combustion, waste incineration, traffic emission, and industrial emission contribute 57.7%, 24.0%, 9.8%, 5.0%, 2.0%, and 1.5%, respectively. Soil dust and secondary aerosols are the two major sources of particulate air pollution in suburban area of Changsha, China, so effective measures should be taken to control these two particulate pollutants.展开更多
Upper atmosphere composition data were obtained for the last half year with a quadruple mass spectrometer on board spacecraft "SZ-2" launched on 10 Jan uary 2001. Based on the analysis of these data, the var...Upper atmosphere composition data were obtained for the last half year with a quadruple mass spectrometer on board spacecraft "SZ-2" launched on 10 Jan uary 2001. Based on the analysis of these data, the variations of atmospheric compositions in solar and geomagnetic quiet conditions are reported first, then a detailed discussion on the atmospheric composition variations under the so lar and geomagnetic disturbed conditions is given. The results show that near the altitude of 400 km the variations of main atmospheric compositions corre sponding to solar disturbances are more remarkable in the sunlit area than in the shade area. On the contrary, in geomagnetic disturbance events the corre sponding variations are more obvious in the shade area, an evident increase of N2 density at relatively higher latitudes was observed.展开更多
The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(...The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.展开更多
A novel layered method was proposed to solve the problem of Web services composition.In this method,services composition problem was formally transformed into the optimal matching problem of every layer,then optimal m...A novel layered method was proposed to solve the problem of Web services composition.In this method,services composition problem was formally transformed into the optimal matching problem of every layer,then optimal matching problem was modeled based on the hypergraph theory,and solved by computing the minimal transversals of the hypergraph.Meanwhile,two optimization algorithms were designed to discard some useless states at the intermediary steps of the composition algorithm.The effectiveness of the composition method was tested by a set of experiments,in addition,an example regarding the travel services composition was also given.The experimental results show that this method not only can automatically generate composition tree whose leaf nodes correspond to services composition solutions,but also has better performance on execution time and solution quality by adopting two proposed optimization algorithms.展开更多
Aluminized explosives exhibit excellent performance because the oxidation of aluminum(Al)powders enhances the pressure and temperature of detonation products.However,the equation of state(EOS)of detonation products ha...Aluminized explosives exhibit excellent performance because the oxidation of aluminum(Al)powders enhances the pressure and temperature of detonation products.However,the equation of state(EOS)of detonation products has not been understood well.In the present study,we conducted long-time tests(approximately 1 ms)of a metal rod driven by detonation products of RDX,RDX/Li F,and RDX/Al.In addition,we used laser velocimetry(PDV)to measure the freesurface velocity of the rod.Thermochemical code DLCHEQ was successfully applied to the hydrodynamic program SSS to perform the roddriven test,and a novel method was established to study the EOS of detonation products from the perspective of composition.The reliability of DLCEHQ was validated by a small deviation(<10%)between the experimental rod free-surface velocity of RDX and the calculated results;the deviation was considerably less than that from the results obtained using the JWL EOS and ideal-gas EOS.The endothermic process and the reaction of Al powders(Al+H_(2)O+NO+CO_(2)→CO+H_(2)+N_(2)+Al_(2)O_(3))were analyzed by calculating the rod free-surface velocity of RDX/Li F and RDX/Al,respectively.The results of the present study demonstrated that the thermodynamic state of Al powders has notable influence on the EOS of aluminized detonation products,and the findings were compared with those of previous studies.First,the temperature equilibrium between Al powders and CHNO products is not always achieved,and the disequilibrium is more obvious when the reaction of Al powders is stronger.Second,the reaction rate of Al powders depends on pressure and Al content.Finally,the endothermic process of Al powders has a high contribution to the decrease in the work ability of RDX/Al instead of the gasconsumption mechanism of the Al reaction.More than half of the reaction heat of Al powders is used to heat itself,whereas the gas consumption during the reaction is negligible.展开更多
The optimization of electrolytes and the material removal mechanisms for Cu electrochemical mechanical planarization(ECMP)at different pH values including 5-methyl-1H-benzotriazole(TTA),hydroxyethylidenediphosphoric a...The optimization of electrolytes and the material removal mechanisms for Cu electrochemical mechanical planarization(ECMP)at different pH values including 5-methyl-1H-benzotriazole(TTA),hydroxyethylidenediphosphoric acid(HEDP),and tribasic ammonium citrate(TAC)were investigated by electrochemical techniques,X-ray photoelectron spectrometer(XPS)analysis,nano-scratch tests,AFM measurements,and polishing of Cu-coated blanket wafers.The experimental results show that the planarization efficiency and the surface quality after ECMP obtained in alkali-based solutions are superior to that in acidic-based solutions,especially at pH=8.The optimal electrolyte compositions(mass fraction)are 6% HEDP,0.3% TTA and 3% TAC at pH=8.The main factor affecting the thickness of the oxide layer formed during ECMP process is the applied potential.The soft layer formation is a major mechanism for electrochemical enhanced mechanical abrasion.The surface topography evolution before and after electrochemical polishing(ECP)illustrates the mechanism of mechanical abrasion accelerating electrochemical dissolution,that is,the residual stress caused by the mechanical wear enhances the electrochemical dissolution rate.This understanding is beneficial for optimization of ECMP processes.展开更多
The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) h...The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.展开更多
This article introduces a fleet composition algorithm for a fleet of intermediate carriers, which should deliver a swarm of miniature unmanned aerial vehicles (mini-UAVs) to a mission area. The algorithm is based on...This article introduces a fleet composition algorithm for a fleet of intermediate carriers, which should deliver a swarm of miniature unmanned aerial vehicles (mini-UAVs) to a mission area. The algorithm is based on the sequential solution of several knapsack problems with various constraints. The algorithm allows both to form an initial set of required types of intermediate carriers, and to generate a fleet of intermediate carriers. The formation of a fleet of intermediate carriers to solve a suppression of enemy air defense (SEAD) problem is presented to illustrate the proposed algorithm.展开更多
基金Supported by Natural Science Foundation of Guangdong Province in China(2018KTSCX161)。
文摘The boundness and compactness of products of multiplication,composition and differentiation on weighted Bergman spaces in the unit ball are studied.We define the differentiation operator on the space of holomorphic functions in the unit ball by radial derivative.Then we extend the Sharma's results.
文摘An energetic binder based on hydroxyl-terminated polybutadiene(HTPB),doped with different ratios of nitrocellulose(NC)(10%,20%,30%,and 50%),was developed to study the effect of NC doping on the thermal decomposition behavior of a composite propellant(CP)comprising ammonium nitrate(AN)as an oxidizer and magnesium(Mg)as a fuel.Optimization of the propellant formulation was conducted using Chemical Equilibrium with Applications-National Aeronautics and Space Administration(CEA-NASA)software,which demonstrated an increase in specific impulse by 12.09 s when the binder contained 50%NC.Fourier-transform infrared spectroscopy(FTIR)analysis confirmed the excellent compatibility between the components,and density measurements revealed an increase of 6.4%with a higher NC content.Morphological analysis using optical microscopy showed that NC doping improved the uniformity and compactness of the surface,reduced cavities,and achieved a more homogeneous particle distribution.Differential scanning calorimetry(DSC)analysis indicated a decrease in the decomposition temperature of the propellant as the NC content increased,while kinetic studies revealed a 48.68%reduction in the activation energy when 50%NC was incorporated into the binder.These findings suggest that the addition of NC enhances combustion efficiency and improves overall propellant performance.This study highlights the potential of the new HTPB-NC energetic binder as a promising approach for advancing solid propellant technology.
文摘Objective To establish a body composition analysis system based on chest CT,and to observe its value for evaluating content of chest muscle and adipose.Methods T7—T8 layer CT images of 108 pneumonia patients were collected(segmented dataset),and chest CT data of 984 patients were screened from the COVID 19-CT dataset(10 cases were randomly selected as whole test dataset,the remaining 974 cases were selected as layer selection dataset).T7—T8 layer was classified based on convolutional neural network(CNN)derived networks,including ResNet,ResNeXt,MobileNet,ShuffleNet,DenseNet,EfficientNet and ConvNeXt,then the accuracy,precision,recall and specificity were used to evaluate the performance of layer selection dataset.The skeletal muscle(SM),subcutaneous adipose tissue(SAT),intermuscular adipose tissue(IMAT)and visceral adipose tissue(VAT)were segmented using classical fully CNN(FCN)derived network,including FCN,SegNet,UNet,Attention UNet,UNET++,nnUNet,UNeXt and CMUNeXt,then Dice similarity coefficient(DSC),intersection over union(IoU)and 95 Hausdorff distance(HD)were used to evaluate the performance of segmented dataset.The automatic body composition analysis system was constructed based on optimal layer selection network and segmentation network,the mean absolute error(MAE),root mean squared error(RMSE)and standard deviation(SD)of MAE were used to evaluate the performance of automatic system for testing the whole test dataset.Results The accuracy,precision,recall and specificity of DenseNet network for automatically classifying T7—T8 layer from chest CT images was 95.06%,84.83%,92.27%and 95.78%,respectively,which were all higher than those of the other layer selection networks.In segmentation of SM,SAT,IMAT and overall,DSC and IoU of UNet++network were all higher,while 95HD of UNet++network were all lower than those of the other segmentation networks.Using DenseNet as the layer selection network and UNet++as the segmentation network,MAE of the automatic body composition analysis system for predicting SM,SAT,IMAT,VAT and MAE was 27.09,6.95,6.65 and 3.35 cm 2,respectively.Conclusion The body composition analysis system based on chest CT could be used to assess content of chest muscle and adipose.Among them,the UNet++network had better segmentation performance in adipose tissue than SM.
基金supported by the Preparation and Characterization of Fogging Agents,Cooperative Project of China(Grant No.1900030040)Preparation and Test of Fogging Agents,Cooperative Project of China(Grant No.2200030085)。
文摘Water-based aerosol is widely used as an effective strategy in electro-optical countermeasure on the battlefield used to the preponderance of high efficiency,low cost and eco-friendly.Unfortunately,the stability of the water-based aerosol is always unsatisfactory due to the rapid evaporation and sedimentation of the aerosol droplets.Great efforts have been devoted to improve the stability of water-based aerosol by using additives with different composition and proportion.However,the lack of the criterion and principle for screening the effective additives results in excessive experimental time consumption and cost.And the stabilization time of the aerosol is still only 30 min,which could not meet the requirements of the perdurable interference.Herein,to improve the stability of water-based aerosol and optimize the complex formulation efficiently,a theoretical calculation method based on thermodynamic entropy theory is proposed.All the factors that influence the shielding effect,including polyol,stabilizer,propellant,water and cosolvent,are considered within calculation.An ultra-stable water-based aerosol with long duration over 120 min is obtained with the optimal fogging agent composition,providing enough time for fighting the electro-optic weapon.Theoretical design guideline for choosing the additives with high phase transition temperature and low phase transition enthalpy is also proposed,which greatly improves the total entropy change and reduce the absolute entropy change of the aerosol cooling process,and gives rise to an enhanced stability of the water-based aerosol.The theoretical calculation methodology contributes to an abstemious time and space for sieving the water-based aerosol with desirable performance and stability,and provides the powerful guarantee to the homeland security.
基金the Doctoral Research Initiation Foundation of Changzhi Medical College(BS202005)。
文摘This study was to investigate the effects of three exogenous substances on chemical constituents of Isatis indigotica leavesand their efficacy in alleviating drought stress, and explore the methods of applying exogenous substances to efficient cultivationof Isatis indigotica. Polyethylene glycol (PEG) was used to simulate drought stress to deal with seeds of Isatis indigotica at thegermination stage (concentration: 0, 10%, 15%, and 20%). Simultaneous operation of exogenous growth regulators [microbialinoculum (MI), γ-aminobutyric acid (GABA) and salicylic acid (SA)] and PEG were implemented in seeds of Isatis indigotica.The effects of drought stress and the mitigation of exogenous substances were observed by statistics of seed germination potential,germination rate, hypocotyl length, and radicle length of each treatment. The effects of exogenous substances on the content ofalkaloids, crude protein and free amino acids in the leaves of Isatis indigotica grown in a greenhouse were determined after sprayingexogenous substances on the plants. The differences of germination potential, germination rate, hypocotyl length, and radicle lengthamong 15% PEG stress treatment, 10% PEG stress treatment and the control were significant (P<0.05). According to the predesignedgermination standard, the seeds did not germinate under 20% PEG stress treatment. When the PEG concentration was 15%, the resultsof seed germination potential and germination rate after adding MI were significantly different from those under stress alone (P<0.05).When exposed to 10% PEG stress, the supplementation of GABA led to a notable increase in radicle length of Isatis indigotica seeds,showing significant differences compared to other three treatments. The application of MI and GABA under 15% PEG stress resultedin a significant increase in the radicle and hypocotyl length of Isatis indigotica seeds compared to other two treatments. The contentof the total alkaloids in leaves of Isatis indigotica was significantly increased after spraying GABA. Meanwhile, the contents of crudeprotein and the total free amino acids were kept constant after spraying exogenous substances. Application of MI and GABA couldalleviate drought stress of Isatis indigotica. The content of the total alkaloids in leaves of Isatis indigotica could significantly increaseafter spraying GABA.
文摘To improve the performance of solid composite propellants(SCPs)supplemented with ammonium nitrate(AN)as an oxidizer,the incorporation of energetic ingredients such as explosives,energetic binders or catalysts is a common effective approach.For this purpose,polyurethane(PU),a typical inert binder,was mixed with nitrocellulose(NC)as an energetic polymer.Numerous composite solid propellant compositions based on AN and NC-modified polyurethane binder with different NC ratios were prepared.The prepared formulations were characterized using Fourier transform infrared spectroscopy(FTIR),RAMAN spectroscopy,X-ray diffraction(XRD),electron densimetry,thermogravimetric(TG)analysis,and differential scanning calorimetry(DSC).A kinetic study was then performed using the iterative KissingerAkahira-Sunose(It-KAS),Flynn-Wall-Ozawa(It-FWO),and non-linear Vyazovkin integral with compensation effect(VYA/CE)methods.The theoretical performances,such as theoretical specific impulse,adiabatic flame temperature,and ideal exhaust gaseous species,were also determined using the NASA Lewis Code,Chemical Equilibrium with Application(CEA).Spectroscopic examinations revealed the existence of NC and full polymerization of PU in the prepared propellants.According to density tests,the density of the propellant increases as the nitrocellulose component increases.According to the thermal analysis and kinetics study,the increase in NC content catalyzed the thermal decomposition of the AN-based composite solid propellants.Based on the theoretical study,increasing the amount of NC in the propellant increased the specific impulse and,as a result,the overall performance.
基金supported by grants from the National Natural Science Foundation of China(No.60703117 and No.11071281)the Fundamental Research Funds for the Central Universities(No.JY 10000903010 and No.JY 10000903014).
文摘The purpose of this paper is to study the construction of concept lattice from variable formal contexts.Composition and decomposition theories are proposed for the unraveling of concept lattice from contexts with variable attribute set in the process of information updating.The relationship between the extension sets of the original context and that of its sub-context is analyzed.The composition and decomposition theories are then generalized to the situation involving more than two sub-contexts and the situation with variable attribute set and object set.
基金Project(70631004)supported by the Key Project of the National Natural Science Foundation of ChinaProject(20080440988)supported by the Postdoctoral Science Foundation of China+1 种基金Project(09JJ4030)supported by the Natural Science Foundation of Hunan Province,ChinaProject supported by the Postdoctoral Science Foundation of Central South University,China
文摘Based on the deficiency of time convergence and variability of Web services selection for services composition supporting cross-enterprises collaboration,an algorithm QCDSS(QoS constraints of dynamic Web services selection)to resolve dynamic Web services selection with QoS global optimal path,was proposed.The essence of the algorithm was that the problem of dynamic Web services selection with QoS global optimal path was transformed into a multi-objective services composition optimization problem with QoS constraints.The operations of the cross and mutation in genetic algorithm were brought into PSOA(particle swarm optimization algorithm),forming an improved algorithm(IPSOA)to solve the QoS global optimal problem.Theoretical analysis and experimental results indicate that the algorithm can better satisfy the time convergence requirement for Web services composition supporting cross-enterprises collaboration than the traditional algorithms.
基金Project(2008AA031202) supported by the National High Technology Research and Development Program of ChinaProject(0992007-6) supported by Major Science & Technology of Guangxi ProvinceProject(CSTC2008AB7127) supported by Major Science & Technology of Chongqing
文摘According to the statistic analysis,the reserve of manganese in electrolytic manganese residue deposit is over 780 kt. The average contents of available manganese and ammonium reach 3.90% and 1.68% (mass fraction),respectively. Large amount of manganese compounds and ammonium sulfate are detruded without any treatment or recovery. The compositions of the main elements in electrolytic manganese residue were analyzed comprehensively based on the extensive research data. According to the new development of electrolytic manganese residue comprehensively used in recent years,a water washing residue-twice precipitation process was also proposed. The experimental results indicate that manganese dioxide silicon dioxide and calcium sulfate are presented as amorphous state in the manganese residues. The recovery rates of manganese and nitrogen reach up to 99.5% and 94.5 %,respectively. The recovery process can be easily implemented,environment-friendly and fitting for industrial production.
文摘The kinetics of the thermal decomposition for a naturally ageing ammonium perchlorate(AP) and hydroxyl-terminated-polybutadiene(HTPB) base bleed composite propellant were investigated using a differential scanning calorimetry(DSC). The naturally ageing AP/HTPB base bleed propellant samples have been stored in a sealed plastic bag at room temperature(5-25 ℃) for more than 20 years. The experimental DSC results were obtained by placing samples(each about 1.5 mg) in a sealed pan under non-isothermal condition under different heating rates, 5.0, 10.0, 15.0, 20.0 and 30.0 ℃·min^(-1). The activation energy and pre-exponential factor were estimated based on the relationship between the exothermic peak temperature and the heating rate by Ozawa and Kissinger methods, respectively. The decomposition kinetic parameters is lower the values under laboratorial aging condition.
文摘The influence of chemical composition on corrosion resistance of AZ91D magnesium alloys ingots has been investigated. Mass loss method was applied to evaluate the corrosion resistance of AZ91D alloys and the data were analyzed by multiple regression. The results show that the corrosion resistance of this alloy can be improved by increasing Al, Zn and Mn in a certain degree, and will drop with increasing Si and heavy metals (Fe, Cu, Ni). It is found that ingots received from company F should be listed into unusable materials in terms of the corrosion resistance, while among the five suppliers, the only local company E supplied excellent AZ91D magnesium alloy ingots with the best corrosion resistance.
基金Project (FANEDD 200545) supported by the Foundation for the Author of National Excellent Doctoral Dissertation of China Project (50408019) supported by the National Natural Science Foundation of China Project (2008BAJ12B03) supported by National Key Project of Scientific and Technical Supporting Programs of China
文摘Source apportionment of particulate matters with aerodynamic diameter less than 10 μm (PM10) was conducted in the suburban area of Changsha, China. PM10 samples for 24 h collected with TEOM 1400a and ACCU system in July and October 2008 were chemically analyzed by the wavelength dispersive X-ray fluorescence (WD-XRF). Source appointment was implemented by the principal component analysis/absolute principal component analysis (PCA/APCA) to identify the possible sources and to quantify the contributions of the sources to PM10. Results show that as the PM10 concentration is increased from (85.6±43.7) μg/m3 in July 2008 to (107.6±35.7) μg/m^3 in October 2008, the concentrations of the anthropogenic elements (P, S, C1, K, Mn, Ni, Cu, Zn, and Pb) are basically increased but concentrations of the natural elements (Na, Mg, Al, Si, Ca, Ti, and Fe) are essentially decreased. Six main sources of PM10 are identified in the suburban of Changsha, China: soil dust, secondary aerosols, domestic oil combustion, waste incineration, traffic emission, and industrial emission contribute 57.7%, 24.0%, 9.8%, 5.0%, 2.0%, and 1.5%, respectively. Soil dust and secondary aerosols are the two major sources of particulate air pollution in suburban area of Changsha, China, so effective measures should be taken to control these two particulate pollutants.
文摘Upper atmosphere composition data were obtained for the last half year with a quadruple mass spectrometer on board spacecraft "SZ-2" launched on 10 Jan uary 2001. Based on the analysis of these data, the variations of atmospheric compositions in solar and geomagnetic quiet conditions are reported first, then a detailed discussion on the atmospheric composition variations under the so lar and geomagnetic disturbed conditions is given. The results show that near the altitude of 400 km the variations of main atmospheric compositions corre sponding to solar disturbances are more remarkable in the sunlit area than in the shade area. On the contrary, in geomagnetic disturbance events the corre sponding variations are more obvious in the shade area, an evident increase of N2 density at relatively higher latitudes was observed.
基金This work was supported by the Fundamental Research Funds for the Central Universities(No.30918011324).
文摘The effects of magnesium/polytetrafluoroethylene(Mg/PTFE)pyrotechnic compositions on the coupled flow field and reignition mechanism are important aspects governing the perfommance and range of base bleed projectiles(BBPs).Owing to a decrease in pressure and temperature when the BBP leaves the muzzle,rapid depressurization occurs,which extinguishes the base bleed propellant.The Mg/PTFE py-rotechnic composition pressed in the igniter of the base bleed unit(BBU)provides additional energy to the BBU via a chemical reaction.Thus,the extinguished base bleed propellant is reignited under the effect of high-temperature combustion gas jets from the igniter.In this study,a numerical analysis is conducted to evaluate the effects of PTFE and Mg granularity as well as Mg/PTFE pyrotechnic compo-sitions.Owing to the rapid depressurization,the temperature and pressure was found to decrease fordifferent Mg/PIFE pyrotechnic compositions.However,the depressurization time increased as the PTFE granularity increased,the Mg granularity decreased,and the Mg content increased.When the pressure in the combustion chamber of the BBU decreased to the atmospheric pressure,the combustion gas jets from the igniter expand upstream(rather than downstream).However,these combustion gas jets exhibit different axial and radial expansion characteristics depending on the pyrotechnic compositions used,The results show that the reignition delay time,ta,of the base bleed propellant was 377.608,94.27,387.243,523.966,and 221.094 ms for cases A-E,respectively.Therefore,it was concluded that the Mg/PTFE pyrotechnic composition of case B was the most beneficial for the reignition of the base bleed propellant,with the earliest addition of energy and mass to the BBP.
基金Project(2010CB328101) supported by the National Basic Research Program of ChinaProject(2009AA01Z401) supported by the National High Technology Research and Development Program of China+4 种基金Projects(60803032,90818023) supported by the National Natural Science Foundation of ChinaProjects(09510701300,09JC1414200,09DZ1120403) supported by the Shanghai Science and Technology Commission,China"Shu Guang" Project(10SG23) supported by Shanghai Municipal Education Commission and Shanghai Education Development Foundation,ChinaProject(09QA1405800) supported by Shanghai Science and Technology Commission Rising-Star Program,ChinaProject(NCET-10-0598) supported by Program for New Century Excellent Talents in Chinese University
文摘A novel layered method was proposed to solve the problem of Web services composition.In this method,services composition problem was formally transformed into the optimal matching problem of every layer,then optimal matching problem was modeled based on the hypergraph theory,and solved by computing the minimal transversals of the hypergraph.Meanwhile,two optimization algorithms were designed to discard some useless states at the intermediary steps of the composition algorithm.The effectiveness of the composition method was tested by a set of experiments,in addition,an example regarding the travel services composition was also given.The experimental results show that this method not only can automatically generate composition tree whose leaf nodes correspond to services composition solutions,but also has better performance on execution time and solution quality by adopting two proposed optimization algorithms.
基金financial support provided by the National Natural Science Foundation of China(Grant No.11902276)the Natural Science Foundation of Sichuan Province(Grant No.2022NSFSC1802)+2 种基金the National Key Laboratory for Shock Wave and Detonation Physics of China(Grant No.JCKYS2019212007)the Original Scientific Research Instrument and Equipment Development Project of Southwest Jiaotong University(Grant No.XJ2021KJZK055)Sichuan Science and Technology Development Project(Grant No.2021ZYD0027)。
文摘Aluminized explosives exhibit excellent performance because the oxidation of aluminum(Al)powders enhances the pressure and temperature of detonation products.However,the equation of state(EOS)of detonation products has not been understood well.In the present study,we conducted long-time tests(approximately 1 ms)of a metal rod driven by detonation products of RDX,RDX/Li F,and RDX/Al.In addition,we used laser velocimetry(PDV)to measure the freesurface velocity of the rod.Thermochemical code DLCHEQ was successfully applied to the hydrodynamic program SSS to perform the roddriven test,and a novel method was established to study the EOS of detonation products from the perspective of composition.The reliability of DLCEHQ was validated by a small deviation(<10%)between the experimental rod free-surface velocity of RDX and the calculated results;the deviation was considerably less than that from the results obtained using the JWL EOS and ideal-gas EOS.The endothermic process and the reaction of Al powders(Al+H_(2)O+NO+CO_(2)→CO+H_(2)+N_(2)+Al_(2)O_(3))were analyzed by calculating the rod free-surface velocity of RDX/Li F and RDX/Al,respectively.The results of the present study demonstrated that the thermodynamic state of Al powders has notable influence on the EOS of aluminized detonation products,and the findings were compared with those of previous studies.First,the temperature equilibrium between Al powders and CHNO products is not always achieved,and the disequilibrium is more obvious when the reaction of Al powders is stronger.Second,the reaction rate of Al powders depends on pressure and Al content.Finally,the endothermic process of Al powders has a high contribution to the decrease in the work ability of RDX/Al instead of the gasconsumption mechanism of the Al reaction.More than half of the reaction heat of Al powders is used to heat itself,whereas the gas consumption during the reaction is negligible.
基金Project(50975058)supported by the National Science Foundation of China
文摘The optimization of electrolytes and the material removal mechanisms for Cu electrochemical mechanical planarization(ECMP)at different pH values including 5-methyl-1H-benzotriazole(TTA),hydroxyethylidenediphosphoric acid(HEDP),and tribasic ammonium citrate(TAC)were investigated by electrochemical techniques,X-ray photoelectron spectrometer(XPS)analysis,nano-scratch tests,AFM measurements,and polishing of Cu-coated blanket wafers.The experimental results show that the planarization efficiency and the surface quality after ECMP obtained in alkali-based solutions are superior to that in acidic-based solutions,especially at pH=8.The optimal electrolyte compositions(mass fraction)are 6% HEDP,0.3% TTA and 3% TAC at pH=8.The main factor affecting the thickness of the oxide layer formed during ECMP process is the applied potential.The soft layer formation is a major mechanism for electrochemical enhanced mechanical abrasion.The surface topography evolution before and after electrochemical polishing(ECP)illustrates the mechanism of mechanical abrasion accelerating electrochemical dissolution,that is,the residual stress caused by the mechanical wear enhances the electrochemical dissolution rate.This understanding is beneficial for optimization of ECMP processes.
基金Project(51304041) supported by the National Natural Science Foundation of ChinaProject(N100402015) supported by Fundamental Research Funds for the Central Universities of China+1 种基金Project(2012AA03A502) supported by the National High Technology Research and Development Program of ChinaProject supported by Program for Liaoning Innovative Research Team in University,China
文摘The influence of chemical composition and cold deformation on aging precipitation behavior of 18Cr-16Mn-2Mo-I.IN (HNS-A), 18Cr-16Mn-I.3N (HNS-B), 18Cr-18Mn-2Mo-0.96N (HNS-C) and 18Cr-18Mn-2Mo-0.77N (I-INS-D) high nitrogen austenitic stainless steels was investigated. The results show that the "nose" temperatures and incubation periods of the initial time-temperature-precipitation (TTP) curves of aged HNSs are found to be 850 ℃, 60 s; 850 ℃, 45 s; 850 ℃, 60 s and 900 ℃, 90 s, respectively. Based on the analysis of SAD patterns, the coarse cellular Cr2N precipitate which presents a lamellar structure has a hexagonal structure of a=0.478 nm and c=0.444 nm. The Z phase corresponding to a composition of Fe36Cr^2Mo10, is determined to be a body-centered cubic structure ofa=0.892 nm. The precipitating sensitivity presents no more difference with the nitrogen content increasing from 0.77% to 0.96%, but exhibits so obviously that the cellular precipitates nearly overspread the whole field. The addition of Mo element can restrain the TTP curves moving left and down, which means decreasing the sensitivity of aging precipitation. With increasing the cold deformation, the sensitivity of precipitation increases obviously.
基金supported by the National Natural Science Foundation of China(60774064)the Aerospace Science Foundation (20085153015)
文摘This article introduces a fleet composition algorithm for a fleet of intermediate carriers, which should deliver a swarm of miniature unmanned aerial vehicles (mini-UAVs) to a mission area. The algorithm is based on the sequential solution of several knapsack problems with various constraints. The algorithm allows both to form an initial set of required types of intermediate carriers, and to generate a fleet of intermediate carriers. The formation of a fleet of intermediate carriers to solve a suppression of enemy air defense (SEAD) problem is presented to illustrate the proposed algorithm.