Hard carbon(HC)is widely used in sodium-ion batteries(SIBs),but its performance has always been limited by lowinitial Coulombic efficiency(ICE)and cycling stability.Cathode compensation agent is a favorable strategy t...Hard carbon(HC)is widely used in sodium-ion batteries(SIBs),but its performance has always been limited by lowinitial Coulombic efficiency(ICE)and cycling stability.Cathode compensation agent is a favorable strategy to make up for the loss of active sodium ions consumed byHCanode.Yet it lacks agent that effectively decomposes to increase the active sodium ions as well as regulate carbon defects for decreasing the irreversible sodium ions consumption.Here,we propose 1,2-dihydroxybenzene Na salt(NaDB)as a cathode compensation agent with high specific capacity(347.9 mAh g^(-1)),lower desodiation potential(2.4–2.8 V)and high utilization(99%).Meanwhile,its byproduct could functionalize HC with more C=O groups and promote its reversible capacity.Consequently,the presodiation hard carbon(pHC)anode exhibits highly reversible capacity of 204.7 mAh g^(-1) with 98%retention at 5 C rate over 1000 cycles.Moreover,with 5 wt%NaDB initially coated on the Na3V2(PO4)3(NVP)cathode,the capacity retention of NVP + NaDB|HC cell could increase from 22%to 89%after 1000 cycles at 1 C rate.This work provides a new avenue to improve reversible capacity and cycling performance of SIBs through designing functional cathode compensation agent.展开更多
Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal re...Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal resolution for research,such as the study of beam–cavity interactions and bunch-by-bunch parameter measurements.Therefore,a signal reconstruction algorithm with ultrahigh spatiotemporal resolution and bunch phase compensation based on equivalent sampling is proposed in this paper.Compared with traditional equivalent sampling,the use of phase compensation and setting the bunch signal zero-crossing point as the time reference can construct a more accurate reconstructed signal.The basic principles of the method,simulation,and experimental comparison are also introduced.Based on the beam test platform of the Shanghai Synchrotron Radiation Facility(SSRF)and the method of experimental verification,the factors that affect the reconstructed signal quality are analyzed and discussed,including the depth of the sampled data,quantization noise of analog-to-digital converter,beam transverse oscillation,and longitudinal oscillation.The results of the beam experiments show that under the user operation conditions of the SSRF,a beam excitation signal with an amplitude uncertainty of 2%can be reconstructed.展开更多
Terrestrial laser scanning(TLS)accurately captures tree structural information and provides prerequisites for treescale estimations of forest biophysical attributes.Quantifying tree-scale attributes from TLS point clo...Terrestrial laser scanning(TLS)accurately captures tree structural information and provides prerequisites for treescale estimations of forest biophysical attributes.Quantifying tree-scale attributes from TLS point clouds requires segmentation,yet the occlusion effects severely affect the accuracy of automated individual tree segmentation.In this study,we proposed a novel method using ellipsoid directional searching and point compensation algorithms to alleviate occlusion effects.Firstly,region growing and point compensation algorithms are used to determine the location of tree roots.Secondly,the neighbor points are extracted within an ellipsoid neighborhood to mitigate occlusion effects compared with k-nearest neighbor(KNN).Thirdly,neighbor points are uniformly subsampled by the directional searching algorithm based on the Fibonacci principle in multiple spatial directions to reduce memory consumption.Finally,a graph describing connectivity between a point and its neighbors is constructed,and it is utilized to complete individual tree segmentation based on the shortest path algorithm.The proposed method was evaluated on a public TLS dataset comprising six forest plots with three complexity categories in Evo,Finland,and it reached the highest mean accuracy of 77.5%,higher than previous studies on tree detection.We also extracted and validated the tree structure attributes using manual segmentation reference values.The RMSE,RMSE%,bias,and bias%of tree height,crown base height,crown projection area,crown surface area,and crown volume were used to evaluate the segmentation accuracy,respectively.Overall,the proposed method avoids many inherent limitations of current methods and can accurately map canopy structures in occluded complex forest stands.展开更多
The railway pantograph-catenary system employs a ratchet compensation device to sustain the tension of the contact wire.However,the excessive weight associated with the ratchet structure adversely affects the performa...The railway pantograph-catenary system employs a ratchet compensation device to sustain the tension of the contact wire.However,the excessive weight associated with the ratchet structure adversely affects the performance of the compensation device.An optimization design aimed at lightweight optimization of the ratchet wheel structure can enhance the system’s agility,improve material utilization,and reduce costs.This study uses a finite element model to establish an equivalent load model for the ratchet under service conditions and analyzes its load-bearing state.An optimization model was created and solved using ANSYS Workbench.The topological optimization configurations were compared under unconstrained conditions and four different periodic constraint scenarios.Following this,the structure was redesigned based on the topological optimization results,and a simulation analysis was conducted to compare the reconstructed model with the original model.The comparison results indicate that the masses of all four optimized models have been reduced by more than 10%.Additionally,under conditions of a fully wound compensation rope,the maximum stress has decreased by over 20%,leading to a more uniform stress distribution and improved overall performance.The topology optimization and redesign method based on periodic constraints offers a viable engineering solution for the lightweight design of the ratchet structure.展开更多
On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mech...On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mechanism of forest ecological benefit, as well as compensation standard in order to provide scientific basis for further perfecting the compensation mechanism of forest ecological engineering benefit in China. It is suggested that setting up the compensation mechanism of forest ecological benefit can not only provide the steady funds source of managing and protecting forest resources, but resolve radically the dynamic and mechanism problems of commonweal forest ecological engineering construction, which will produce a widespread and profound influence on China forestry and ecological construction.展开更多
Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a no...Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a nonlinear observer/filter structure to compensate for uncertainties in corresponding friction parameters associated with the turntable system. Moreover, in the second scheme, adjustable gains are introduced into the dual nonlin- ear filters and they can be tuned to improve the position tracking performance. In both cases, a Lyapunov-like argument is provided for the global asymptotic stability of the closed-loop system. Simulation results demonstrate the effectiveness of the proposed schemes.展开更多
Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used...Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.展开更多
Aim To eliminate the influences of backlash nonlinear characteristics generally existing in servo systems, a nonlinear compensation method using backpropagation neural networks(BPNN) is presented. Methods Based on s...Aim To eliminate the influences of backlash nonlinear characteristics generally existing in servo systems, a nonlinear compensation method using backpropagation neural networks(BPNN) is presented. Methods Based on some weapon tracking servo system, a three layer BPNN was used to off line identify the backlash characteristics, then a nonlinear compensator was designed according to the identification results. Results The simulation results show that the method can effectively get rid of the sustained oscillation(limit cycle) of the system caused by the backlash characteristics, and can improve the system accuracy. Conclusion The method is effective on sloving the problems produced by the backlash characteristics in servo systems, and it can be easily accomplished in engineering.展开更多
Aim Aiming at the position tracking control for valve controlled motor electrohydraulic proportional servo systems mainly driving the static load torque, the tracking performance was studied in the presence of the v...Aim Aiming at the position tracking control for valve controlled motor electrohydraulic proportional servo systems mainly driving the static load torque, the tracking performance was studied in the presence of the variable gain and deadzone. Methods On the basis of conventional composite control with the deadzone compensation method, a comprehensive control approach with the deadzone and self adjusting feedforward compensation was proposed. Results Experimental results showed that the good tracking performance was achieved for the sinusoidal and constant velocity position tracking under a wide variations of load torque. Conclusion The position tracking accuracy for valve controlled motor electrohydraulic proportional servo systems has been solved by using the comprehensive control approach with the deadzone and self adjusting feedforward compensation.展开更多
This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication sys...This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication system. The obtained results show that the transmitter-receiver synchronization progressively degrades and the signal-to-noise ratio of the recovered message deteriorates as the fibre length increases due to the dispersion accumulation. Two segments of 2.5-km dispersion-compensating fibres are symmetrically placed at both ends of a segment of 245-km nonzero dispersionshifted fibre with low dispersion in one compensation period. The numerical results show that the signal-to-noise ratio of the extracted 1 GHz sinusoidal message is improved from -2.92 dB to 15.38 dB by this dispersion compensation for the transmission distance of 500 km.展开更多
基金supported by National Natural Science Foundation of China(No.22278308 and 22109114)Open Foundation of Shanghai Jiao Tong University Shaoxing Research Institute of Renewable Energy and Molecular Engineering(Grant number:JDSX2022023).
文摘Hard carbon(HC)is widely used in sodium-ion batteries(SIBs),but its performance has always been limited by lowinitial Coulombic efficiency(ICE)and cycling stability.Cathode compensation agent is a favorable strategy to make up for the loss of active sodium ions consumed byHCanode.Yet it lacks agent that effectively decomposes to increase the active sodium ions as well as regulate carbon defects for decreasing the irreversible sodium ions consumption.Here,we propose 1,2-dihydroxybenzene Na salt(NaDB)as a cathode compensation agent with high specific capacity(347.9 mAh g^(-1)),lower desodiation potential(2.4–2.8 V)and high utilization(99%).Meanwhile,its byproduct could functionalize HC with more C=O groups and promote its reversible capacity.Consequently,the presodiation hard carbon(pHC)anode exhibits highly reversible capacity of 204.7 mAh g^(-1) with 98%retention at 5 C rate over 1000 cycles.Moreover,with 5 wt%NaDB initially coated on the Na3V2(PO4)3(NVP)cathode,the capacity retention of NVP + NaDB|HC cell could increase from 22%to 89%after 1000 cycles at 1 C rate.This work provides a new avenue to improve reversible capacity and cycling performance of SIBs through designing functional cathode compensation agent.
基金supported by the National Key R&D Program of China(No.2022YFA1602201)the international partnership program of the Chinese Academy of Sciences(No.211134KYSB20200057).
文摘Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal resolution for research,such as the study of beam–cavity interactions and bunch-by-bunch parameter measurements.Therefore,a signal reconstruction algorithm with ultrahigh spatiotemporal resolution and bunch phase compensation based on equivalent sampling is proposed in this paper.Compared with traditional equivalent sampling,the use of phase compensation and setting the bunch signal zero-crossing point as the time reference can construct a more accurate reconstructed signal.The basic principles of the method,simulation,and experimental comparison are also introduced.Based on the beam test platform of the Shanghai Synchrotron Radiation Facility(SSRF)and the method of experimental verification,the factors that affect the reconstructed signal quality are analyzed and discussed,including the depth of the sampled data,quantization noise of analog-to-digital converter,beam transverse oscillation,and longitudinal oscillation.The results of the beam experiments show that under the user operation conditions of the SSRF,a beam excitation signal with an amplitude uncertainty of 2%can be reconstructed.
基金supported by the National Natural Science Foundation of China(Nos.32171789,32211530031,12411530088)the National Key Research and Development Program of China(No.2023YFF1303901)+2 种基金the Joint Open Funded Project of State Key Laboratory of Geo-Information Engineering and Key Laboratory of the Ministry of Natural Resources for Surveying and Mapping Science and Geo-spatial Information Technology(2022-02-02)Background Resources Survey in Shennongjia National Park(SNJNP2022001)the Open Project Fund of Hubei Provincial Key Laboratory for Conservation Biology of Shennongjia Snub-nosed Monkeys(SNJGKL2022001).
文摘Terrestrial laser scanning(TLS)accurately captures tree structural information and provides prerequisites for treescale estimations of forest biophysical attributes.Quantifying tree-scale attributes from TLS point clouds requires segmentation,yet the occlusion effects severely affect the accuracy of automated individual tree segmentation.In this study,we proposed a novel method using ellipsoid directional searching and point compensation algorithms to alleviate occlusion effects.Firstly,region growing and point compensation algorithms are used to determine the location of tree roots.Secondly,the neighbor points are extracted within an ellipsoid neighborhood to mitigate occlusion effects compared with k-nearest neighbor(KNN).Thirdly,neighbor points are uniformly subsampled by the directional searching algorithm based on the Fibonacci principle in multiple spatial directions to reduce memory consumption.Finally,a graph describing connectivity between a point and its neighbors is constructed,and it is utilized to complete individual tree segmentation based on the shortest path algorithm.The proposed method was evaluated on a public TLS dataset comprising six forest plots with three complexity categories in Evo,Finland,and it reached the highest mean accuracy of 77.5%,higher than previous studies on tree detection.We also extracted and validated the tree structure attributes using manual segmentation reference values.The RMSE,RMSE%,bias,and bias%of tree height,crown base height,crown projection area,crown surface area,and crown volume were used to evaluate the segmentation accuracy,respectively.Overall,the proposed method avoids many inherent limitations of current methods and can accurately map canopy structures in occluded complex forest stands.
基金supported by the National Natural Science Foundation of China(Grant No.52075033)Research and Development Plan of REG(Grant No.2023-20)。
文摘The railway pantograph-catenary system employs a ratchet compensation device to sustain the tension of the contact wire.However,the excessive weight associated with the ratchet structure adversely affects the performance of the compensation device.An optimization design aimed at lightweight optimization of the ratchet wheel structure can enhance the system’s agility,improve material utilization,and reduce costs.This study uses a finite element model to establish an equivalent load model for the ratchet under service conditions and analyzes its load-bearing state.An optimization model was created and solved using ANSYS Workbench.The topological optimization configurations were compared under unconstrained conditions and four different periodic constraint scenarios.Following this,the structure was redesigned based on the topological optimization results,and a simulation analysis was conducted to compare the reconstructed model with the original model.The comparison results indicate that the masses of all four optimized models have been reduced by more than 10%.Additionally,under conditions of a fully wound compensation rope,the maximum stress has decreased by over 20%,leading to a more uniform stress distribution and improved overall performance.The topology optimization and redesign method based on periodic constraints offers a viable engineering solution for the lightweight design of the ratchet structure.
基金this study was supported by National Forestry Sci-ence and Technology Support Program (No.2006BAD03A15)Key laboratory of Forest Silvculture of the State Forestry Ministration’ Sus-tentation Fund
文摘On the basis of analysis of the present situation of the ecological benefit compensation in China and foreign countries, this paper discusses the necessity, principle and approach of establishing the compensation mechanism of forest ecological benefit, as well as compensation standard in order to provide scientific basis for further perfecting the compensation mechanism of forest ecological engineering benefit in China. It is suggested that setting up the compensation mechanism of forest ecological benefit can not only provide the steady funds source of managing and protecting forest resources, but resolve radically the dynamic and mechanism problems of commonweal forest ecological engineering construction, which will produce a widespread and profound influence on China forestry and ecological construction.
文摘Two adaptive friction compensation schemes are developed for a high precision turntable system with nonlinear dynamic friction to handle two types of parametric uncertainties in the friction. Both schemes utilize a nonlinear observer/filter structure to compensate for uncertainties in corresponding friction parameters associated with the turntable system. Moreover, in the second scheme, adjustable gains are introduced into the dual nonlin- ear filters and they can be tuned to improve the position tracking performance. In both cases, a Lyapunov-like argument is provided for the global asymptotic stability of the closed-loop system. Simulation results demonstrate the effectiveness of the proposed schemes.
文摘Motion compensation is a key step for inverse synthetic aperture radar (ISAR) imaging. Many algorithms have been proposed. The rank one phase estimation (ROPE) algorithm is a good estimator for phase error widely used in SAR. The ROPE algorithm is used in ISAR phase compensation and the concrete implementation steps are presented. Subsequently, the performance of ROPE is analyzed. For ISAR data that fit the ROPE algorithm model, an excellent compensation effect can be obtained with high computation efficiency. Finally, ISAR real data are processed with ROPE and its imaging result is compared with that obtained by the modified Doppler centroid tracking (MDCT) method, which is a robust and good estimator in ISAR phase compensation.
文摘Aim To eliminate the influences of backlash nonlinear characteristics generally existing in servo systems, a nonlinear compensation method using backpropagation neural networks(BPNN) is presented. Methods Based on some weapon tracking servo system, a three layer BPNN was used to off line identify the backlash characteristics, then a nonlinear compensator was designed according to the identification results. Results The simulation results show that the method can effectively get rid of the sustained oscillation(limit cycle) of the system caused by the backlash characteristics, and can improve the system accuracy. Conclusion The method is effective on sloving the problems produced by the backlash characteristics in servo systems, and it can be easily accomplished in engineering.
文摘Aim Aiming at the position tracking control for valve controlled motor electrohydraulic proportional servo systems mainly driving the static load torque, the tracking performance was studied in the presence of the variable gain and deadzone. Methods On the basis of conventional composite control with the deadzone compensation method, a comprehensive control approach with the deadzone and self adjusting feedforward compensation was proposed. Results Experimental results showed that the good tracking performance was achieved for the sinusoidal and constant velocity position tracking under a wide variations of load torque. Conclusion The position tracking accuracy for valve controlled motor electrohydraulic proportional servo systems has been solved by using the comprehensive control approach with the deadzone and self adjusting feedforward compensation.
基金supported by the National Natural Science Foundation of China (Grant Nos 60777041 and 60577019)the International Cooperation Project of Shanxi Province,China (Grant No 2007081019)
文摘This paper numerically investigates the effects of dispersion on optical fibre chaotic communication, and proposes a dispersion compensation scheme to improve the performance of optical fibre chaotic communication system. The obtained results show that the transmitter-receiver synchronization progressively degrades and the signal-to-noise ratio of the recovered message deteriorates as the fibre length increases due to the dispersion accumulation. Two segments of 2.5-km dispersion-compensating fibres are symmetrically placed at both ends of a segment of 245-km nonzero dispersionshifted fibre with low dispersion in one compensation period. The numerical results show that the signal-to-noise ratio of the extracted 1 GHz sinusoidal message is improved from -2.92 dB to 15.38 dB by this dispersion compensation for the transmission distance of 500 km.
