Electroshocking treatment(EST),an efficient and rapid material treatment method,promotes microstructure evolution and improves mechanical properties.This study incorporates EST into the conventional cold rolling-quenc...Electroshocking treatment(EST),an efficient and rapid material treatment method,promotes microstructure evolution and improves mechanical properties.This study incorporates EST into the conventional cold rolling-quenching tempering process of M50 steel and investigates the influence and mechanism of applying EST at different stages of the process on the microstructure and mechanical properties.Scanning electron microscope(SEM),transmission electron microscope(TEM),and X-ray diffraction(XRD)were used to characterize the effect of EST on microstructure.The results show that EST can refine the grains of M50(average reduction of 10.1%in grain size),homogenize the grain size distribution,reduce the dislocation density(20.9%in average),promote the dissolution of carbides in the matrix and distribute them more uniformly along the grain boundaries,resulting in the improvement of mechanical properties.The mechanical properties of the specimen with the process flow of rolling-quenching-tempering-electroshocking showed excellent performance,with an increase in hardness of 1.4%,tensile strength of 17.7%,and elongation at break of 24.3%as compared to the specimen without EST.The tensile properties of the specimen with the process flow of rolling electroshocking-quenching-tempering showed the best performance,with an increase in tensile strength of 30.0%and elongation at break of 30.7%as compared to the specimen without EST.展开更多
基于稀疏非均匀COLD(concentered orthogonal loop and dipole)阵列,提出了一种极化信号的DOA(direction-of-arrival)无模糊估计算法。该算法利用了稀疏非均匀COLD阵列的阵元数少和孔径大等特点,因而在阵元数目一定的情况下,可获得较高...基于稀疏非均匀COLD(concentered orthogonal loop and dipole)阵列,提出了一种极化信号的DOA(direction-of-arrival)无模糊估计算法。该算法利用了稀疏非均匀COLD阵列的阵元数少和孔径大等特点,因而在阵元数目一定的情况下,可获得较高的DOA估计精度。由于稀疏非均匀COLD阵列可分成电磁环和偶极子两个子阵列,通过分析每个子阵列DOA估计的模糊性,给出了整个稀疏非均匀COLD阵列不发生DOA估计模糊的条件。通过计算机仿真证明了该算法的有效性。展开更多
同点正交配置磁环和电偶极子(Co-centered orthogonal loop and dipole,COLD)是一种最常用的二分量电磁矢量传感器,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息。本文针对由COLD传感器组成的均匀线阵(Uniform linear array...同点正交配置磁环和电偶极子(Co-centered orthogonal loop and dipole,COLD)是一种最常用的二分量电磁矢量传感器,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息。本文针对由COLD传感器组成的均匀线阵(Uniform linear array,ULA),将所有磁环和电偶极子分量分别沿两个正交方向均匀拉伸,形成L形阵,扩展阵列的空间孔径,并提出了基于广义旋转不变的降维多重信号分类算法(Dimension reduction multiple signal classification method based on generalized rotational invariance,GRIDR-MUSIC)。所提算法利用L形阵的几何构形,将导向矢量分隔成三部分,通过两个正交ULA的广义旋转不变结构,分别估计各个部分,使得波达角(Direction of arrival)和极化参数仅需一维谱峰搜索就可以估计得到,且无需参数匹配。最后,仿真实验验证了所提算法的有效性。展开更多
同点正交配置磁环和电偶极子(Co-centered Orthogonal Loop and Dipole,COLD)是常用的二分量电磁矢量传感器之一,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息.针对由COLD传感器组成的均匀线阵,磁环分量保持不变,将电偶极...同点正交配置磁环和电偶极子(Co-centered Orthogonal Loop and Dipole,COLD)是常用的二分量电磁矢量传感器之一,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息.针对由COLD传感器组成的均匀线阵,磁环分量保持不变,将电偶极子分量沿正交方向稀疏拉伸,形成L形阵,扩展阵列的空间孔径,提出了基于广义旋转不变的降维多重信号分类算法.该算法利用L形阵的几何构形,将导向矢量分隔成三部分,利用广义旋转不变矩阵分别估计各个部分,使得波达角和极化参数仅需一维谱峰搜索就可以估计得到.同时,在参考点处新增一个电偶极子天线,利用四元数模型解决了由于稀疏拉伸引起的相位周期模糊问题.仿真实验验证了所提算法的有效性.展开更多
Successfully developed an innovative process of direct reduction of cold bound pellets from iron ore concentrate with a coal based rotary kiln, in comparison with the traditional direct reduction of fired oxide pellet...Successfully developed an innovative process of direct reduction of cold bound pellets from iron ore concentrate with a coal based rotary kiln, in comparison with the traditional direct reduction of fired oxide pellets in coal based rotary kilns , possesses such advantages as: shorter flowsheet, lower capital investment, greater economic profit, good quality of direct reduced iron. The key technologies , such as the composite binder and corresponding feasible techniques were employed in practice. A mill utilizing this process and with an annual capacity of 50 thousand ton DRI has been put into operation.展开更多
Various kinds of base oils were applied to cold rolling aluminum strips on a test mill for evaluationof the influences of these base oils,aromatics contents and viscosity of base oils on their lubricating performances...Various kinds of base oils were applied to cold rolling aluminum strips on a test mill for evaluationof the influences of these base oils,aromatics contents and viscosity of base oils on their lubricating performances and surface reflectivity of rolled strips at annealing. Results showed that low friction coefficient androlling force were obtained by using the normal paraffins,whereas their contaminations on the annealed stripsurface were the same as those of other saturated hydrocarbons. Aromatics in base oil affected the stir face reflectivity of annealed strips, but the decrease of aromatics in base oil was ineffective to improve rolled stripssurface quality when it is less than 1 %. Base oil viscosity has the great influences on the lubricating performances and surface reflectivity of annealed strips just in this condition.展开更多
This study was to investigate the effects of cold stress on the contents of total antioxidant capacity （T-AOC） malondialdehyde （MDA） and superoxide dismutase （SOD） in duodenum, jejunum and ileum of chickens. A t...This study was to investigate the effects of cold stress on the contents of total antioxidant capacity （T-AOC） malondialdehyde （MDA） and superoxide dismutase （SOD） in duodenum, jejunum and ileum of chickens. A total of 80 15-dayold male chickens were treated by cold stress with the duration of the acute cold stress being 1, 3, 6, 12, and 24 h, and the chronic cold stress was 5, 10, and 20 days, respectively. Cold stress temperature was （12±1）℃. The chemical colorimetric method was used to detect the changes of the T-AOC, SOD activities and MDA contents. The results showed that compared with the corresponding control group, effects of acute cold stress on the T-AOC in duodenum, jejunum and ileum of chickens significantly （P〈0.05） increased firstly and then decreased. Under chronic cold stress, the T-AOC significantly （P〈0.05） decreased. Under acute cold stress and chronic cold stress, the MDA contents significantly （P〈0.05） increased in duodenum, jejunum and ileum of chickens. The effects of acute cold stress on the SOD activities in duodenum, jejunum and ileum of chickens significantly （P〈0.05） increased firstly and then decreased Under chronic cold stress the SOD activities significantly （P〈0.05） decreased in jejunum and ileum, but significantly （P〈0.05） decreased firstly and then increased in duodenum.展开更多
Total 75 rice varieties （lines） in Heilongjiang Province （or cold region） as germplasm resources were identified for cold tolerance at germinating stage by controlling temperature in artificial incubator. The resu...Total 75 rice varieties （lines） in Heilongjiang Province （or cold region） as germplasm resources were identified for cold tolerance at germinating stage by controlling temperature in artificial incubator. The results showed that the shooting seed rate at the germinating stage could be used as the evaluation index of cold tolerance. The cold tolerance was recorded on 1-9 scale and could be identified by the criteria of five indexes such as highly tolerant （HT）, tolerant （T）, moderately tolerant （MT）, susceptible （S）, highly susceptible （HS）.展开更多
Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and opt...Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and optimized remeshing function, especially for the large deformation. In order to use this function sufficiently, simulation of cold rolling involutes spline can be implemented indirectly. The relationship between die and workpiece, forming force and characteristic of deformation in the forming process of cold rolling involutes spline are analyzed and researched. Meanwhile, reliable proofs for the design of dies and deforming equipment are provided.展开更多
Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, t...Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, the process, weld combinations, laser-CMT hybrid welding and applications of CMT welding are critically reviewed. Microstructure and other weld characteristics have been discussed at length for various base metal combinations. Particularly, the welding of aluminium and steel with better results has been possible with CMT Welding. The results reviewed in this article indicate that the CMT-Laser hybrid welding is more preferable to Laser or Laser hybrid welding. CMT welding has found applications in automobile industries, defence sectors and power plants as a method of additive manufacturing.展开更多
Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)...Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)were identified in the Asplenium adiantum-nigrum L.,Althaea officinalis L.,Verbascum phlomoides L.,Euphorbia chamaesyce L.,Zizyphus jujube Miller,Peganum harmala L.,Arum dioscoridis Sm.,Sambucus nigra L.,Piper longum L.,Tussilago farfara L.and Elettaria cardamomum Maton by employing flame atomic absorption and emission spectrometry and electro-thermal atomic absorption spectrometry.Microwave digestion procedure for total concentration was applied under optimized conditions for dissolution of medicinal plants.Plant based biological certified reference materials(CRMs)served as standards for quantification.These elements are found to be present in varying concentrations in the studied plants.The baseline data presented in this work can be used in understanding the role of essential,non-essential and toxic elements in nutritive,preventive and therapeutic properties of medicinal plants.展开更多
The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on co...The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on cold tolerance and its related physiological parameters in rice seedings （chilling-sensitive cv. Changbai 9 and chilling-tolerant cv. Jijing 81） under low temperature stress. At the same time, the identification of cold tolerance was conducted. Compared with the normal temperature treatment, the relative chlorophyll content, photosynthesis rate, Fv/Fm and qP decreased and index of unsaturated fatty acid increased in rice under low temperature stress. The effect of chilling-sensitive cultivars was more than that of chilling-tolerant cultivars, more phosphorus fertilizer properly improved seedling quality of rice, slowed relative chlorophyll content dropping degree of rice seeding, increased photosynthesis rate, Fv/Fm, qP and index of unsaturated fatty acids, and enhanced the ability to chilling-tolerant cultivars under low temperature. The effect on chilling-tolerant cultivars was significantly higher than that on chilling sensitive cultivars by applying more phosphorus fertilizer. Phosphate regulated photosynthetic physiology and membrane fluidity to reduce injury by low temperature, and increasd the cold tolerance capacity of rice.展开更多
Winter wheat （Triticum aestivum） cultivars Dongnongdongmai 1 with strong cold/freezing tolerance and Jimai 22 with weak cold/freezing tolerance were used for investigating the difference of microstructure and ultras...Winter wheat （Triticum aestivum） cultivars Dongnongdongmai 1 with strong cold/freezing tolerance and Jimai 22 with weak cold/freezing tolerance were used for investigating the difference of microstructure and ultrastructure between leaves of two cultivars under low temperature stress （5℃ and -15 ℃） using optical and electron microscope. The results showed that there was no obvious difference between leaves of Dongnongdongmai 1 and Jimai 22 in microstructure. However, the difference between those leaves was distinct in ultrastructure. The grana lamella and stroma lamella were stacked regularly and arranged parallelly along the long axis of chloroplasts in cv. Dongnongdongmai 1, while the arrangement directions of thylakoids in Jimai 22＇s leaves were so irregular as to form various angles with the long axis of chloroplasts. At -15℃, the mitochondrias were swelled to be round and the structure of cristaes became blurry in both cultivars＇ leaves, while some cristaes of Jimai 22 disappeared. These results would provide theoretical evidence for selecting cold/freezing tolerant winter wheat germplasm resources展开更多
Cold closed-die forging is a suitable process to produce spur-bevel gears due to its advantages, such as saving materials and time, reducing costs, increasing die life and improving the quality of the product. The hom...Cold closed-die forging is a suitable process to produce spur-bevel gears due to its advantages, such as saving materials and time, reducing costs, increasing die life and improving the quality of the product. The homogeneity of microstructure of cold closed-die forged gears can highly affect their service performance. The homogeneity of microstructure and Vickers hardness in cold closed-die forged gear of 20 Cr Mn Ti alloy is comprehensively studied by using optical microscopy and Vickers hardness tester. The results show that the distribution homogeneity of the aspect ratio of grain and Vickers hardness is the same. In the circumferential direction of the gear tooth, the distribution of the aspect ratio of grain and Vickers hardness is inhomogeneous and they gradually decrease from the surface to the center of the tooth. In the radial direction, the distribution of the aspect ratio of grain and Vickers hardness is inhomogeneous on the surface of the gear tooth; while it is relatively homogeneous in the center of the gear tooth. In the axial direction of the gear tooth, the distribution of the aspect ratio of grain and Vickers hardness is relatively homogeneous from the small-end to the large-end of the gear tooth.展开更多
The dynamic model of cold rolling mill based on strip flatness and thickness integrated control was proposed,containing the following sub-models:the rolling process model,the dynamic model of rolls along axial directi...The dynamic model of cold rolling mill based on strip flatness and thickness integrated control was proposed,containing the following sub-models:the rolling process model,the dynamic model of rolls along axial direction,and the compensation model.Based on the rule of volume flow rate,the dynamic rolling process model was built.The work roll and backup roll were taken as elastic continuous bodies,the effect of shear and moment of inertia were taken into consideration,and then the dynamic model of rolls was built.The two models were coupled together,and the dynamic model of rolling mill was built.In the dynamic model,the thermal expansion of the rolls,the wear of the rolls and other related parameters can not be considered.In order to compensate the dynamic model,the coupled static model of rolls and strip was applied.Then,according to the inner relationship of these models,the dynamic model and the compensation model were coupled,and the dynamic model of rolling mill based on the strip flatness and thickness integrated control was built.The dynamic simulation of the rolling process was made,and the dynamic thickness and the dynamic flatness information were obtained.This model not only provides a theory basis for the virtual rolling,but also provides a platform for the application of advanced control theory.展开更多
基金Project(G202403)supported by the Open Foundation of The State Key Laboratory of Refractories and Metallurgy,ChinaProject(2022CFB378)supported by the Natural Science Foundation of Hubei Province,China+2 种基金Project(B 17034)supported by 111 Project,ChinaProject(IRT_17R83)supported by the Innovative Research Team Development Program of Ministry of Education of ChinaProject(P2024-026)supported by the Open Foundation of The State Key Laboratory of Materials Processing and Die&Mould Technology,China。
文摘Electroshocking treatment(EST),an efficient and rapid material treatment method,promotes microstructure evolution and improves mechanical properties.This study incorporates EST into the conventional cold rolling-quenching tempering process of M50 steel and investigates the influence and mechanism of applying EST at different stages of the process on the microstructure and mechanical properties.Scanning electron microscope(SEM),transmission electron microscope(TEM),and X-ray diffraction(XRD)were used to characterize the effect of EST on microstructure.The results show that EST can refine the grains of M50(average reduction of 10.1%in grain size),homogenize the grain size distribution,reduce the dislocation density(20.9%in average),promote the dissolution of carbides in the matrix and distribute them more uniformly along the grain boundaries,resulting in the improvement of mechanical properties.The mechanical properties of the specimen with the process flow of rolling-quenching-tempering-electroshocking showed excellent performance,with an increase in hardness of 1.4%,tensile strength of 17.7%,and elongation at break of 24.3%as compared to the specimen without EST.The tensile properties of the specimen with the process flow of rolling electroshocking-quenching-tempering showed the best performance,with an increase in tensile strength of 30.0%and elongation at break of 30.7%as compared to the specimen without EST.
文摘基于稀疏非均匀COLD(concentered orthogonal loop and dipole)阵列,提出了一种极化信号的DOA(direction-of-arrival)无模糊估计算法。该算法利用了稀疏非均匀COLD阵列的阵元数少和孔径大等特点,因而在阵元数目一定的情况下,可获得较高的DOA估计精度。由于稀疏非均匀COLD阵列可分成电磁环和偶极子两个子阵列,通过分析每个子阵列DOA估计的模糊性,给出了整个稀疏非均匀COLD阵列不发生DOA估计模糊的条件。通过计算机仿真证明了该算法的有效性。
文摘同点正交配置磁环和电偶极子(Co-centered orthogonal loop and dipole,COLD)是一种最常用的二分量电磁矢量传感器,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息。本文针对由COLD传感器组成的均匀线阵(Uniform linear array,ULA),将所有磁环和电偶极子分量分别沿两个正交方向均匀拉伸,形成L形阵,扩展阵列的空间孔径,并提出了基于广义旋转不变的降维多重信号分类算法(Dimension reduction multiple signal classification method based on generalized rotational invariance,GRIDR-MUSIC)。所提算法利用L形阵的几何构形,将导向矢量分隔成三部分,通过两个正交ULA的广义旋转不变结构,分别估计各个部分,使得波达角(Direction of arrival)和极化参数仅需一维谱峰搜索就可以估计得到,且无需参数匹配。最后,仿真实验验证了所提算法的有效性。
文摘同点正交配置磁环和电偶极子(Co-centered Orthogonal Loop and Dipole,COLD)是常用的二分量电磁矢量传感器之一,但是COLD传感器没有充分利用磁环和电偶极子分量的空间信息.针对由COLD传感器组成的均匀线阵,磁环分量保持不变,将电偶极子分量沿正交方向稀疏拉伸,形成L形阵,扩展阵列的空间孔径,提出了基于广义旋转不变的降维多重信号分类算法.该算法利用L形阵的几何构形,将导向矢量分隔成三部分,利用广义旋转不变矩阵分别估计各个部分,使得波达角和极化参数仅需一维谱峰搜索就可以估计得到.同时,在参考点处新增一个电偶极子天线,利用四元数模型解决了由于稀疏拉伸引起的相位周期模糊问题.仿真实验验证了所提算法的有效性.
基金The Key Project of the 9th Five year Plan of Ministry of Science andTechnology!(No .960 40 2 0 2A)the Foundation for Unive
文摘Successfully developed an innovative process of direct reduction of cold bound pellets from iron ore concentrate with a coal based rotary kiln, in comparison with the traditional direct reduction of fired oxide pellets in coal based rotary kilns , possesses such advantages as: shorter flowsheet, lower capital investment, greater economic profit, good quality of direct reduced iron. The key technologies , such as the composite binder and corresponding feasible techniques were employed in practice. A mill utilizing this process and with an annual capacity of 50 thousand ton DRI has been put into operation.
文摘Various kinds of base oils were applied to cold rolling aluminum strips on a test mill for evaluationof the influences of these base oils,aromatics contents and viscosity of base oils on their lubricating performances and surface reflectivity of rolled strips at annealing. Results showed that low friction coefficient androlling force were obtained by using the normal paraffins,whereas their contaminations on the annealed stripsurface were the same as those of other saturated hydrocarbons. Aromatics in base oil affected the stir face reflectivity of annealed strips, but the decrease of aromatics in base oil was ineffective to improve rolled stripssurface quality when it is less than 1 %. Base oil viscosity has the great influences on the lubricating performances and surface reflectivity of annealed strips just in this condition.
基金Supported by the Special Foundation of Technological Innovation Project of Harbin (DEDE-2010RFXXN041)
文摘This study was to investigate the effects of cold stress on the contents of total antioxidant capacity （T-AOC） malondialdehyde （MDA） and superoxide dismutase （SOD） in duodenum, jejunum and ileum of chickens. A total of 80 15-dayold male chickens were treated by cold stress with the duration of the acute cold stress being 1, 3, 6, 12, and 24 h, and the chronic cold stress was 5, 10, and 20 days, respectively. Cold stress temperature was （12±1）℃. The chemical colorimetric method was used to detect the changes of the T-AOC, SOD activities and MDA contents. The results showed that compared with the corresponding control group, effects of acute cold stress on the T-AOC in duodenum, jejunum and ileum of chickens significantly （P〈0.05） increased firstly and then decreased. Under chronic cold stress, the T-AOC significantly （P〈0.05） decreased. Under acute cold stress and chronic cold stress, the MDA contents significantly （P〈0.05） increased in duodenum, jejunum and ileum of chickens. The effects of acute cold stress on the SOD activities in duodenum, jejunum and ileum of chickens significantly （P〈0.05） increased firstly and then decreased Under chronic cold stress the SOD activities significantly （P〈0.05） decreased in jejunum and ileum, but significantly （P〈0.05） decreased firstly and then increased in duodenum.
文摘Total 75 rice varieties （lines） in Heilongjiang Province （or cold region） as germplasm resources were identified for cold tolerance at germinating stage by controlling temperature in artificial incubator. The results showed that the shooting seed rate at the germinating stage could be used as the evaluation index of cold tolerance. The cold tolerance was recorded on 1-9 scale and could be identified by the criteria of five indexes such as highly tolerant （HT）, tolerant （T）, moderately tolerant （MT）, susceptible （S）, highly susceptible （HS）.
文摘Design of forming dies and whole process of simulation of cold rolling involutes spline can be realized by using of CAD software of PRO-E and CAE software of DEFORM-3D. Software DEFORM-3D provides an automatic and optimized remeshing function, especially for the large deformation. In order to use this function sufficiently, simulation of cold rolling involutes spline can be implemented indirectly. The relationship between die and workpiece, forming force and characteristic of deformation in the forming process of cold rolling involutes spline are analyzed and researched. Meanwhile, reliable proofs for the design of dies and deforming equipment are provided.
文摘Cold Metal Transfer technology has revolutionized the welding of dissimilar metals and thicker materials by producing improved weld bead aesthetics with controlled metal deposition and low heat-input. In this study, the process, weld combinations, laser-CMT hybrid welding and applications of CMT welding are critically reviewed. Microstructure and other weld characteristics have been discussed at length for various base metal combinations. Particularly, the welding of aluminium and steel with better results has been possible with CMT Welding. The results reviewed in this article indicate that the CMT-Laser hybrid welding is more preferable to Laser or Laser hybrid welding. CMT welding has found applications in automobile industries, defence sectors and power plants as a method of additive manufacturing.
基金Financial support from the Unit of the Scientific Research Projects of Innü University(Grant no:2008/34)
文摘Eleven important medicinal plants generally used by the people of Turkey for the treatment of common cold have been studied for their mineral contents.Eleven minor and major elements(essential,non-essential and toxic)were identified in the Asplenium adiantum-nigrum L.,Althaea officinalis L.,Verbascum phlomoides L.,Euphorbia chamaesyce L.,Zizyphus jujube Miller,Peganum harmala L.,Arum dioscoridis Sm.,Sambucus nigra L.,Piper longum L.,Tussilago farfara L.and Elettaria cardamomum Maton by employing flame atomic absorption and emission spectrometry and electro-thermal atomic absorption spectrometry.Microwave digestion procedure for total concentration was applied under optimized conditions for dissolution of medicinal plants.Plant based biological certified reference materials(CRMs)served as standards for quantification.These elements are found to be present in varying concentrations in the studied plants.The baseline data presented in this work can be used in understanding the role of essential,non-essential and toxic elements in nutritive,preventive and therapeutic properties of medicinal plants.
基金Supported by the Special Agricultural Project of Agricultural Department (200903003)the Agricultural Modernization Project in the Science and Technology Development Plan of Jilin Province (2009-2010) the High-yield Project of Science and Technology Department (2011BAD16B10)
文摘The study was designated to explore the physiological mechanism of cold tolerance enhanced by phosphate in rice. An experiment was conducted to investigate the effects of different levels of phosphate fertilizer on cold tolerance and its related physiological parameters in rice seedings （chilling-sensitive cv. Changbai 9 and chilling-tolerant cv. Jijing 81） under low temperature stress. At the same time, the identification of cold tolerance was conducted. Compared with the normal temperature treatment, the relative chlorophyll content, photosynthesis rate, Fv/Fm and qP decreased and index of unsaturated fatty acid increased in rice under low temperature stress. The effect of chilling-sensitive cultivars was more than that of chilling-tolerant cultivars, more phosphorus fertilizer properly improved seedling quality of rice, slowed relative chlorophyll content dropping degree of rice seeding, increased photosynthesis rate, Fv/Fm, qP and index of unsaturated fatty acids, and enhanced the ability to chilling-tolerant cultivars under low temperature. The effect on chilling-tolerant cultivars was significantly higher than that on chilling sensitive cultivars by applying more phosphorus fertilizer. Phosphate regulated photosynthetic physiology and membrane fluidity to reduce injury by low temperature, and increasd the cold tolerance capacity of rice.
基金Supported by Doctoral Scientific Research Project of Northeast Agricultural University (20082010)Innovative Research Team Project of Northeast Agricultural University (CXZ003)
文摘Winter wheat （Triticum aestivum） cultivars Dongnongdongmai 1 with strong cold/freezing tolerance and Jimai 22 with weak cold/freezing tolerance were used for investigating the difference of microstructure and ultrastructure between leaves of two cultivars under low temperature stress （5℃ and -15 ℃） using optical and electron microscope. The results showed that there was no obvious difference between leaves of Dongnongdongmai 1 and Jimai 22 in microstructure. However, the difference between those leaves was distinct in ultrastructure. The grana lamella and stroma lamella were stacked regularly and arranged parallelly along the long axis of chloroplasts in cv. Dongnongdongmai 1, while the arrangement directions of thylakoids in Jimai 22＇s leaves were so irregular as to form various angles with the long axis of chloroplasts. At -15℃, the mitochondrias were swelled to be round and the structure of cristaes became blurry in both cultivars＇ leaves, while some cristaes of Jimai 22 disappeared. These results would provide theoretical evidence for selecting cold/freezing tolerant winter wheat germplasm resources
基金Project(51105287)supported by the National Natural Science Foundation of ChinaProject(2013M531750)supported by China Postdoctoral Science Foundation
文摘Cold closed-die forging is a suitable process to produce spur-bevel gears due to its advantages, such as saving materials and time, reducing costs, increasing die life and improving the quality of the product. The homogeneity of microstructure of cold closed-die forged gears can highly affect their service performance. The homogeneity of microstructure and Vickers hardness in cold closed-die forged gear of 20 Cr Mn Ti alloy is comprehensively studied by using optical microscopy and Vickers hardness tester. The results show that the distribution homogeneity of the aspect ratio of grain and Vickers hardness is the same. In the circumferential direction of the gear tooth, the distribution of the aspect ratio of grain and Vickers hardness is inhomogeneous and they gradually decrease from the surface to the center of the tooth. In the radial direction, the distribution of the aspect ratio of grain and Vickers hardness is inhomogeneous on the surface of the gear tooth; while it is relatively homogeneous in the center of the gear tooth. In the axial direction of the gear tooth, the distribution of the aspect ratio of grain and Vickers hardness is relatively homogeneous from the small-end to the large-end of the gear tooth.
基金Project(E2012203177)supported by the Natural Science Foundation of Hebei Province,ChinaProject(2011BAF15B01)supported by the National Science and Technology Support Plan of China+1 种基金Project(E2006001038)supported by Great Natural Science Foundation of Hebei Province,ChinaProject(NECSR-201202)supported by Open Project Program of National Engineering Research Center for Equipment and Technology of Cold Strip Rolling,China
文摘The dynamic model of cold rolling mill based on strip flatness and thickness integrated control was proposed,containing the following sub-models:the rolling process model,the dynamic model of rolls along axial direction,and the compensation model.Based on the rule of volume flow rate,the dynamic rolling process model was built.The work roll and backup roll were taken as elastic continuous bodies,the effect of shear and moment of inertia were taken into consideration,and then the dynamic model of rolls was built.The two models were coupled together,and the dynamic model of rolling mill was built.In the dynamic model,the thermal expansion of the rolls,the wear of the rolls and other related parameters can not be considered.In order to compensate the dynamic model,the coupled static model of rolls and strip was applied.Then,according to the inner relationship of these models,the dynamic model and the compensation model were coupled,and the dynamic model of rolling mill based on the strip flatness and thickness integrated control was built.The dynamic simulation of the rolling process was made,and the dynamic thickness and the dynamic flatness information were obtained.This model not only provides a theory basis for the virtual rolling,but also provides a platform for the application of advanced control theory.
