Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of eleva...Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.展开更多
Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesi...Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesis of those linearized approximate equations leads to big errors when the two media across the interface vary dramatically.To extend the application of AVO analysis and inversion to high contrast between the properties of the two layers,we derive a novel nonlinearized high-contrast approximation of the PP-wave reflection coefficient,which establishes the direct relationship between PPwave reflection coefficient and P-wave velocities,S-wave velocities and densities across the interface.（A PP wave is a reflected compressional wave from an incident compressional wave（P-wave）.） This novel approximation is derived from the exact reflection coefficient equation with Taylor expansion for the incident angle.Model tests demonstrate that,compared with the reflection coefficients of the linearized approximations,the reflection coefficients of the novel nonlinearized approximate equation agree with those of the exact PP equation better for a high contrast interface with a moderate incident angle.Furthermore,we introduce a nonlinear direct inversion method utilizing the novel reflection coefficient equation as forward solver,to implement the direct inversion for the six parameters including P-wave velocities,S-wave velocities,and densities in the upper and lower layers across the interface.This nonlinear inversion algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way.Three examples verified the feasibility and suitability of this novel approximation for a high contrast interface,and we still could estimate the six parameters across the interface reasonably when the parameters in both media across the interface vary about 50%.展开更多
To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid t...To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood （EW） and latewood （LW）： tracheid length （TL）, double wall thickness （WT）, radial lumen diameter （R_D1）, tangential lumen diameter （T_D1）, radial central diameter （R_D2）, and tangential central diameter （T_D2）. We also studied the relationship with the following growth traits： diameter at breast height （DBH）, height （H）, crown breadth south-north axis （NSC）, crown breadth east-west axis （EWC）, ring width （RW）, latewood percentage （LWP）, and wood density （WD）. All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49-26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. H2/C was higher in LW （0.50） than in EW （0.20） for TL, while H 2/C was higher in EW （0.27-0.46） for other tracheid traits and the two ratios （TL/T_D2 and WT/R_D1） than in EW （0.06-0.22）. WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values （EW_WT/ R_D1, LW WT/R_D1, EW_TL/T_D2 and LW_TL/ T_D2）, were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW （r2= 0.22）. Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% （wood density was reduced by 0.14%） and produced similar responses between EW and LW for all tracheid traits： a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters （from 0.36 to 5.24%） and double wall thickness （0.07 and 0.87%）. The two ratios WT/R_D1 and TL/T_D2 across tissues （EW and LW） declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current longterm breeding program for P. tabuliformis.展开更多
A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of ...A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio（ PSRR） of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^（-6）/℃-9. 56 × 10^（-6）/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^（-6）/℃.展开更多
Compliant parts are widely applied to aircraft structures.Due to the ease of deformation of compliant parts in assembly,the prediction of assembly variation is especially important for assembly quality control.A dimen...Compliant parts are widely applied to aircraft structures.Due to the ease of deformation of compliant parts in assembly,the prediction of assembly variation is especially important for assembly quality control.A dimensional variation model considering the clamping force change in assembly is proposed based on the method of influence coefficient(MIC).First,the assembly process is decomposed into several steps including positioning,clamping,joining,and spring-back.Then,the force-displacement relationship is formulated according to the varied force conditions on the parts in each assembly step.Finally,two examples are illustrated to validate the proposed assembly variation model.The results show the impact of clamping force change is significant on the assembly variation,and the proposed model can predict the assembly variation more accurately than the referred method without clamping force correction at the over-constrained locating points of fixture.展开更多
基金Supported by the National Natural Science Foundation of China(61363075)the National High Technology Research and Development Program of China(863 Program)(2012AA12A308)the Yue Qi Young Scholars Program of China University of Mining&Technology,Beijing(800015Z1117)
文摘Aiming to deal with the difficult issues of terrain data model simplification and crack disposal,the paper proposed an improved level of detail(LOD)terrain rendering algorithm,in which a variation coefficient of elevation is introduced to express the undulation of topography.Then the coefficient is used to construct a node evaluation function in the terrain data model simplification step.Furthermore,an edge reduction strategy is combined with the improved restrictive quadtree segmentation to handle the crack problem.The experiment results demonstrated that the proposed method can reduce the amount of rendering triangles and enhance the rendering speed on the premise of ensuring the rendering effect compared with a traditional LOD algorithm.
基金the sponsorship of the National 973 Program of China (2013CB228604)the National Grand Project for Science and Technology (2011ZX05030-004-002, 2011ZX05019-003 and 2011ZX05006-002) for funding this research+2 种基金the support of the Australian and Western Australian Governments and the North West Shelf Joint Venture Partnersthe Western Australian Energy Research Alliance (WA:ERA)Foundation from Geophysical Key Lab of SINOPEC (WTYJYWX2013-04-01)
文摘Linearized approximations of reflection and transmission coefficients set a foundation for amplitude versus offset（AVO） analysis and inversion in exploration geophysics.However,the weak properties contrast hypothesis of those linearized approximate equations leads to big errors when the two media across the interface vary dramatically.To extend the application of AVO analysis and inversion to high contrast between the properties of the two layers,we derive a novel nonlinearized high-contrast approximation of the PP-wave reflection coefficient,which establishes the direct relationship between PPwave reflection coefficient and P-wave velocities,S-wave velocities and densities across the interface.（A PP wave is a reflected compressional wave from an incident compressional wave（P-wave）.） This novel approximation is derived from the exact reflection coefficient equation with Taylor expansion for the incident angle.Model tests demonstrate that,compared with the reflection coefficients of the linearized approximations,the reflection coefficients of the novel nonlinearized approximate equation agree with those of the exact PP equation better for a high contrast interface with a moderate incident angle.Furthermore,we introduce a nonlinear direct inversion method utilizing the novel reflection coefficient equation as forward solver,to implement the direct inversion for the six parameters including P-wave velocities,S-wave velocities,and densities in the upper and lower layers across the interface.This nonlinear inversion algorithm is able to estimate the inverse of the nonlinear function in terms of model parameters directly rather than in a conventional optimization way.Three examples verified the feasibility and suitability of this novel approximation for a high contrast interface,and we still could estimate the six parameters across the interface reasonably when the parameters in both media across the interface vary about 50%.
基金supported by “Open Fund of State Key Laboratory of Tree Genetics and Breeding(Chinese Academy of Forestry)(Grant No.TGB2016001)”“The Lecture and Study Program for Outstanding Scholars from Home and Abroad(Grant No.CAFYBB2011007)”“Continuation project of National Natural Science Foundation of China(Grant No.CAFNSFC201601)”
文摘To improve wood quality for pulpwood industries, it is important to examine not only wood density but also its components, especially tracheid characteristics. We studied genetic variations in the following tracheid traits by earlywood （EW） and latewood （LW）： tracheid length （TL）, double wall thickness （WT）, radial lumen diameter （R_D1）, tangential lumen diameter （T_D1）, radial central diameter （R_D2）, and tangential central diameter （T_D2）. We also studied the relationship with the following growth traits： diameter at breast height （DBH）, height （H）, crown breadth south-north axis （NSC）, crown breadth east-west axis （EWC）, ring width （RW）, latewood percentage （LWP）, and wood density （WD）. All sample materials were collected from a 33-year old clonal seed orchard of Pinus tabuliformis Carr. Genetic variation among clones was moderate for all tracheid traits, 9.49-26.03%. Clones significantly affected WT, R_D1, R_D2, T_D1, T_D2, and the two ratios WT/R_D1 and TL/T_D2 in EW but had no effects in LW. Clones significantly affected TL in LW but had no effects in EW. H2/C was higher in LW （0.50） than in EW （0.20） for TL, while H 2/C was higher in EW （0.27-0.46） for other tracheid traits and the two ratios （TL/T_D2 and WT/R_D1） than in EW （0.06-0.22）. WD and TL were significantly positively correlated, but WT and TL were negatively correlated both at individual and clone levels; all tracheid diameters and the four ratio values （EW_WT/ R_D1, LW WT/R_D1, EW_TL/T_D2 and LW_TL/ T_D2）, were strongly positively correlated with DBH, H, NSC, WEC and RW, and strongly negatively correlated with WD both at individual and clone levels. The most important variables for predicting WD were LW_TL, EW_WT and R_D1 in both EW and LW （r2= 0.22）. Selecting the top 10% of the clones by DBH would improve DBH growth by 12.19% （wood density was reduced by 0.14%） and produced similar responses between EW and LW for all tracheid traits： a reduction of 0.94 and 3.69% in tracheid length and increases in tracheid diameters （from 0.36 to 5.24%） and double wall thickness （0.07 and 0.87%）. The two ratios WT/R_D1 and TL/T_D2 across tissues （EW and LW） declined 0.59 and 4.56%, respectively. The decreased tracheid length and the ratio between tracheid length and diameter is disadvantageous for pulp production. The unfavorable relationship of tracheid traits with wood density indicate that multiple trait selection using optimal economic weights and optimal breeding strategies are recommended for the current longterm breeding program for P. tabuliformis.
基金Supported by the National Natural Science Foundation of China(61604109)the National High-Tech R&D Program of China(2015AA042605)
文摘A lowtemperature coefficient（ TC） bandgap reference（ BGR） with novel process variation calibration technique is proposed in this paper. This proposed calibration technique compensating both TC and output value of BGR achieves fine adjustment step towards the reference voltage,while keeping optimal TC by utilizing large resistance to help layout match. The high-order curvature compensation realized by poly and p-diffusion resistors is introduced into the design to guarantee the temperature characteristic. Implemented in 180 nm technology,the proposed BGR has been simulated to have a power supply rejection ratio（ PSRR） of 91 dB@100 Hz. The calibration technique covers output voltage scope of 0. 49 V-0. 56 Vwith TC of 9. 45 × 10^（-6）/℃-9. 56 × 10^（-6）/℃ over the temperature range of-40 ℃-120 ℃. The designed BGR provides a reference voltage of 500 mV,with measured TC of 10. 1 × 10^（-6）/℃.
基金funded by the National Natural Science Foundation of China ( No.51275236)
文摘Compliant parts are widely applied to aircraft structures.Due to the ease of deformation of compliant parts in assembly,the prediction of assembly variation is especially important for assembly quality control.A dimensional variation model considering the clamping force change in assembly is proposed based on the method of influence coefficient(MIC).First,the assembly process is decomposed into several steps including positioning,clamping,joining,and spring-back.Then,the force-displacement relationship is formulated according to the varied force conditions on the parts in each assembly step.Finally,two examples are illustrated to validate the proposed assembly variation model.The results show the impact of clamping force change is significant on the assembly variation,and the proposed model can predict the assembly variation more accurately than the referred method without clamping force correction at the over-constrained locating points of fixture.
