In the process of bromine production,because of lag adjustment methods,there are problems of adjusting delay,raw material wastage and low growth rate.By considering the nature of bromine production,with the help of fu...In the process of bromine production,because of lag adjustment methods,there are problems of adjusting delay,raw material wastage and low growth rate.By considering the nature of bromine production,with the help of fuzzy data processing method,computer detection and display technique,we designed an automatic detection instrument for the ratio of chlorine to bromine in oxidized liquid of bromine production.This instrument can be used to detect the different parameters of raw materials adjustment and control in real time,and afford assurance that raw materials will be adjusted in time.This paper briefly introduces the working mechanism,hardware and software design of the instrument.展开更多
Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based dir...Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.展开更多
建立了液相色谱-串联质谱(LC-MS/MS)手性拆分和测定水产品中奥沙西泮和替马西泮对映体残留量的分析方法。样品经乙腈提取2次,40℃条件下氮气浓缩至近干,残渣加入2 mL 50%乙腈-水溶液溶解,采用分散固相萃取净化,LC-MS/MS测定。使用Enanti...建立了液相色谱-串联质谱(LC-MS/MS)手性拆分和测定水产品中奥沙西泮和替马西泮对映体残留量的分析方法。样品经乙腈提取2次,40℃条件下氮气浓缩至近干,残渣加入2 mL 50%乙腈-水溶液溶解,采用分散固相萃取净化,LC-MS/MS测定。使用EnantioPAK■Y1-R(5μm,150 mm×4.6 mm)手性色谱柱,乙腈和0.1%甲酸-5 mmol/L乙酸铵溶液作为流动相,采用等度洗脱方式实现奥沙西泮和替马西泮手性对映体的拆分。目标对映体采用电喷雾正离子(ESI^(+))模式电离,多反应监测(MRM)模式下,内标法测定。目标对映体在0.5~50μg/L质量浓度范围内线性关系良好,相关系数(r^(2))均不低于0.9990。水产品中对映体的检出限和定量下限分别为0.2μg/kg和0.5μg/kg。在5种空白基质中添加低、中、高浓度水平的目标对映体,样品平均加标回收率为82.6%~107%,相对标准偏差(RSD,n=6)为1.6%~9.2%。该方法灵敏可靠、适用性强,可用于不同水产品中奥沙西泮和替马西泮对映体的分析。展开更多
文摘In the process of bromine production,because of lag adjustment methods,there are problems of adjusting delay,raw material wastage and low growth rate.By considering the nature of bromine production,with the help of fuzzy data processing method,computer detection and display technique,we designed an automatic detection instrument for the ratio of chlorine to bromine in oxidized liquid of bromine production.This instrument can be used to detect the different parameters of raw materials adjustment and control in real time,and afford assurance that raw materials will be adjusted in time.This paper briefly introduces the working mechanism,hardware and software design of the instrument.
基金Project(2011GH561685)supported by the China Torch Program
文摘Solid wastes derived from metallurgical industries pose a significant threat to environment. The utilization and disposal of these solid wastes are the major concern in the world. Semi-coke generated in coal-based direct reduction process of iron ore is a by-product and its suitable utilization is not available so far. In order to handle it properly, the characteristics of this by-product were comprehensively investigated. A series of analysis methods were used to demonstrate its mineral compositions, petrography and physico-chemical properties. The results reveal that the semi-coke has poor washability. The fixed carbon content of semi-coke reaches 76.11% and the gross calorific value is 28.10 MJ/kg, both of which are similar to those of traditional sinter coke breeze. Also, semi-coke ash possesses lower content of SiO2, Al2O3, S and higher content of CaO and MgO, which could improve the strength of sinter ore when partially substituting for coke breeze in sintering. Semi-coke features well-development porous structure and higher reaction activity, which predicts that the sintering speed could be elevated to some extent when employing it as a partial replacement of coke breeze, so the studies further suggest that the potential adverse effect of the high reactivity on sintering process could be weakened by adequately coarsening the semi-coke's particle size.
