This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-bas...This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.展开更多
To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The ...To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.展开更多
Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)s...Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)scenario due to the fast development of in-home PLC.The aim of this paper is to evaluate the link-level performance of a medium voltage(MV)MIMO-OFDM communication system based on transmission link under underground power line channel.The MIMO channel is modeled as a modified multipath model in the presence of impulsive noise and background noise.We first perform a measurement on the practical MV MIMO channel parameters for a section of buried cable of 1 km long in Ganzhou city,Jiangxi province,China.Based on the measured channel,we design the frame structure based on an IEEE standard for broadband over power line networks[1]to support MV MIMO-OFDM transmission.According to designed frame structure,we design an encoder and a decoder for a dual binary tail-biting turbo code and optimize some key decoder parameters for low bit error rate performance.Finally,the link-level performance for both spatial multiplexing and spatial diversity are evaluated.Numeral results show that MV MIMO-OFDM is a promising approach to provide both high data rate and link reliability for PLC.展开更多
For studying the dynamic performance of subsea umbilical cable laying system and achieving the goal of cable tension and laying speed control,the rigid finite element method is used to discrete and transform the syste...For studying the dynamic performance of subsea umbilical cable laying system and achieving the goal of cable tension and laying speed control,the rigid finite element method is used to discrete and transform the system into a rigid-flexible coupling multi-body system which consists of rigid elements and spring-damping elements.The mathematical model of subsea umbilical cable laying system kinematic chain is presented with the second order Lagrange equation in the joint coordinate system,and dynamic modeling and simulation is performed with ADAMS.The dynamic analysis is conducted assuming the following three statuses:ideal laying,practical laying under wave disturbance,and practical laying with tension compensation.Results show that motion disturbances of the laying budge under sea waves,especially with heaving and pitching,will cause relatively serious fluctuations in cable tension and laying speed.Tension compensation,i.e.,active back tension torque control can restrict continuous tension increasing or decreasing effectively and rapidly,thus avoiding cable breach or buckling.展开更多
MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial...MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial multiplexing technology will be affected by the spatial correlation between MIMO-PLC sub-channels.To reduce the system bit error rate caused by MIMO-PLC correlation among sub-channels,this paper proposed a phase rotation precoding scheme for the 2×2 closed-loop MIMO-PLC system.According to the channel transfer function of high correlation MIMO-PLC system,the phase rotation precoding matrix F is calculated,and the transmission signal matrix S is modulated with the F,the code distance at the receiving point with smallest code distance is increased by phase rotation.Simulation results show that the scheme can effectively reduce the bit error rate of the 2×2 MIMO-PLC system based on ML detection,and significantly improve the system performance.展开更多
The support of coal roadways is seriously affected by intense dynamic pressures.This can lead to problems with large deformation of the roof and the two side walls of coal roadways.Rapid convergence of the walls and r...The support of coal roadways is seriously affected by intense dynamic pressures.This can lead to problems with large deformation of the roof and the two side walls of coal roadways.Rapid convergence of the walls and roof,a high damage rate to the bolts and cables,or even abrupt roof collapse or rib spalling can occur during the service period of these coal roadways.Analyzing the main support measures used in China leads to a proposed new cable truss supporting system.Thorough study of the entire structure shows the superiority of this design for roadways suffering under dynamic pressure.A corresponding mechanical model of the rock surrounding the cable truss system is described in this paper and formulas for calculating pre-tightening forces of the truss cable,and the minimum anchoring forces,were deduced.The new support system was applied to a typical roadway affected by intensive dynamic pressure that is located in the Xinyuan Coal Mine.The results show that the largest subsidence of the roof was 97 mm,the convergence of the two sides was less than 248 mm,and the average depth of the loose,fractured layer was only 6.12 mm.This proves that the new support system is feasible and effective.展开更多
To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail tra...To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.展开更多
Tree spars,as appropriate supports for cable yarding systems,have to beverified for the strength before any real operation.This paper gives theoretical analysisfor various cases.Tree spars without guylines are normall...Tree spars,as appropriate supports for cable yarding systems,have to beverified for the strength before any real operation.This paper gives theoretical analysisfor various cases.Tree spars without guylines are normally under heavy bending stress,which dominates the strength design.For tree spars equipped with guylines,the spardeflection follows the same way as an unguyed spar.The overload of the bending stressremains the main reason of spar failures.Several diversities of tree spars from theidealized condition are investigated for the sake of better modeling of the real situation.Analysis supports that the tree spar can generally be treated as a straight cylindricalcolumn without giving significant errors.The load can be handled as centrically applied.Design methods are provided for both guyed and unguyed tree spars,which will benefit thepractice of using tree spars as an alternative for steel spars.展开更多
A high temperature superconductor （HTS） cable system of both a length of 4 metre and a normal current of 2 KA with terminations and a cooling system has been built up and tested. The cable conductor was made of Bi-2...A high temperature superconductor （HTS） cable system of both a length of 4 metre and a normal current of 2 KA with terminations and a cooling system has been built up and tested. The cable conductor was made of Bi-2223 tape. A space maintained vacuum between two corrugated stainless steel tubes functions as the cryostat surrounding the superconductor. A series of tests were carried out to verify the functions of the system. The important data obtained can be used to make longer HTS cable systems.展开更多
The high reliability of the communication system is critical in metro and mining applications for personal safety,channel optimization,and improving operational performance.This paper surveys the progress of wireless ...The high reliability of the communication system is critical in metro and mining applications for personal safety,channel optimization,and improving operational performance.This paper surveys the progress of wireless communication systems in underground environments such as tunnels and mines from 1920 to 2022,including the evolution of primitive technology,advancements in channel modelling,and realization of various wireless propagation channels.In addition,the existing and advanced channel modeling strategies,which include the evolution of different technologies and their applications;mathematical,analytical,and experimental techniques for radio propagation;and significance of the radiation characteristics,antenna placement,and physical environment of multiple-input multiple-output(MIMO)communication systems,are analyzed.The given study introduces leaky coaxial cable(LCX)and distributed antenna system(DAS)designs for improving narrowband and wideband channel capacity.The paper concludes by figuring out open research areas for the future technologies.展开更多
The transmission characteristics of video transmission mediums,coaxial ca ble and optical fiber,are discussed in the paper. The formulas for frequency bandwidth are given to evaluate the video transmission distance. F...The transmission characteristics of video transmission mediums,coaxial ca ble and optical fiber,are discussed in the paper. The formulas for frequency bandwidth are given to evaluate the video transmission distance. For typical video transmission systems with BB/IM and PFM/IM tising optical fiber as the channel, expressions and calculating results for both S/N and sensitivity are given. Finally, the principle for se lecting different type of transmission systems according to transmission distances of the industrial TV is presented.展开更多
Rotorcraft in low-level flight is endangered by power lines or telephone wires. The development of automation tools that can detect obstacles in the flight path and warn the crew would significantly reduce pilot workl...Rotorcraft in low-level flight is endangered by power lines or telephone wires. The development of automation tools that can detect obstacles in the flight path and warn the crew would significantly reduce pilot workload and increase safety. Therefore, a cable detection radar system is developed The real-time dynamic imaging synchronizing with radar space scanning has been implemented in developed ladar system. The requirements of the flight mission to prevent ＂wire strike＂ are analyzed and estimated, the advantages and disadvantages of the millimeter wave system with the laser system are weighted The result shows that Laser system is the best suited for helicopter avoidance obstacle. In addition, several design gist of detecting wire radar that was used in the developed ladar system is proposed and the developed zero backlash imaging technology and several advanced warning function are described. The detailed results of system ground tests and the performances description are presented The ground test of the developed ladar system has demonstrated that the developed imaging ladar system performance can achieve and satisfy the requirements of the mission to prevent ＂wire strike＂.展开更多
A 33.5 m, 35 kV/121 MVA, three-phase, warm dielectric HTS power cable system was successfully installed and activated in China Southern Power Grid at the Puji substation in Kunming on April 19th of 2004, supplying ele...A 33.5 m, 35 kV/121 MVA, three-phase, warm dielectric HTS power cable system was successfully installed and activated in China Southern Power Grid at the Puji substation in Kunming on April 19th of 2004, supplying electricity to four industrial customers （including two metallurgical refineries） and a residential population of about 100000. In this paper, we give an update on the operation and maintenance status of the system and comments on reliability issues. We conclude that the superconducting cable system is currently quite robust and feasible for particular utility applications, and it will be improved by advancement in cryogenic equipment and system technology.展开更多
High stress in surrounding rock will lead to serious problems,e.g.,rock burst in hard rock and large deformation in soft rock.The applied support system under high in-situ stress conditions should be able to carry hig...High stress in surrounding rock will lead to serious problems,e.g.,rock burst in hard rock and large deformation in soft rock.The applied support system under high in-situ stress conditions should be able to carry high load and also accommodate large deformation without experiencing severe damage.In this paper,a specially designed energy-absorbing component for rock bolt and cable that can solve the above problems was proposed.The energy-absorbing component can provide support resistance by plastic deformation of the metal including constraint annulus and compression pipe.For practical engineering,two forms were proposed.One was installed in the surrounding rock by reaming,and the other was installed directly outside the surrounding rock.During the dilation of the surrounding rock,the relative displacement of constraint annulus and compression pipe occurs,resulting in deformation resistance.Deformation resistance is transmitted to the rock bolt or cable,providing support resistance.The lab test and numerical simulation showed that the energy-absorbing component can perfectly achieve the large deformation effect,the deformation amount is as high as 694 mm,and the bearing capacity is stable at 367 kN.The field application tests were carried out in the mining roadway of Xinjulong coal mine,and the results showed that the new type of cable can ensure itself not to break under the condition of large deformation of the surrounding rock.The energy-absorbing component has the superiorities of performing large constant resistance and controllable deformation to effectively control the unpredictable disasters such as large deformation in soft rock and rock burst in hard rock encountered in deep strata.展开更多
The umbilical cable is a vital component of subsea production systems that provide power,chemical agents,control signals et al.,and its requirement for reliability is exceedingly high.However,as the umbilical cable is...The umbilical cable is a vital component of subsea production systems that provide power,chemical agents,control signals et al.,and its requirement for reliability is exceedingly high.However,as the umbilical cable is a composite structure comprising multiple functional units,the reliability analysis of such cables involves numerous parameters that can impact calculation efficiency.In this paper,the reliability analysis of a new kind of umbilical cable with carbon fiber rod under tension is analyzed.The global dynamic analytical model is first established to determine the maximum tension load,then the local analytical model of umbilical cable including each unit are constructed by finite element method(FEM).Based on the mechanical analytical model,the reliability of umbilical cable under tension load is studied using response surface method(RSM)and Monte Carlo method.During the calculation process,a new tangent plane sampling method to calculate the response surface function(RSF)is proposed in this paper,which could make sampling points faster come close to the RSF curve,and it is proved that the calculation efficiency increases about 33%comparing with traditional method.展开更多
Excavating super-large-span tunnels in soft rock masses presents significant challenges.To ensure safety,the sequential excavation method is commonly adopted.It utilizes internal temporary supports to spatially partit...Excavating super-large-span tunnels in soft rock masses presents significant challenges.To ensure safety,the sequential excavation method is commonly adopted.It utilizes internal temporary supports to spatially partition the tunnel face and divide the excavation into multiple stages.However,these internal supports generally impose spatial constraints,limiting the use of large-scale excavation equipment and reducing construction efficiency.To address this constraint,this study adopts the“Shed-frame”principle to explore the feasibility of an innovative support system,which aims to replace internal supports with prestressed anchor cables and thus provide a more spacious working space with fewer internal obstructions.To evaluate its effectiveness,a field case involving the excavation of a 24-m span tunnel in soft rock is presented,and an analysis of extensive field data is conducted to study the deformation characteristics of the surrounding rock and the mechanical behavior of the support system.The results revealed that prestressed anchor cables integrated the initial support with the shed,creating an effective“shed-frame”system,which successively maintained tunnel deformation and frame stress levels within safe regulatory bounds.Moreover,the prestressed anchor cables bolstered the surrounding rock effectively and reduced the excavation-induced disturbance zone significantly.In summary,the proposed support system balances construction efficiency and safety.These field experiences may offer valuable insights into the popularization and further development of prestressed anchor cable support systems.展开更多
基金supported by the National Natural Science Foundation of China(No.52077151)the State Key Laboratory of Electrical Insulation and Power Equipment(No.EIPE23208)the Key Laboratory of Engineering Dielectrics and Its Application,Ministry of Education(No.KFM202203).
文摘This study focuses on the electrical properties and microstructure of polypropylene(PP)-based blends used for cable insulation in nuclear power plants(NPPs).The PP-based blend,comprising isotactic PP and propylene-based elastomer(PBE)at concentrations ranging from 0 to 50 wt%,underwent a melt blending process and subsequent cobalt-60 gamma-ray irradiation with doses ranging from 0 to 250 kGy.Electrical conductivity,trap distribution,and alternating(AC)breakdown strength were chosen to assess the insulation performance.These results indicate that the addition of PBE significantly improves the electrical properties of PP under irradiation.For PP,the electrical conductivity increased with irradiation,whereas the trap depth and breakdown strength decreased sharply.Conversely,for the blend,these changes initially exhibit opposite trends.When the irradiation was increased to 250 kGy,the AC breakdown strength of the blend improved by more than 21%compared to that of PP.The physical and chemical structures of the samples were investigated to explore the improvement mechanisms.The results offer insights into the design of new cable-insulation materials suitable for NPPs.
基金supported by the National Natural Science Foundation of China(Nos.U2468217,U2034205,and 52308391)。
文摘To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.
文摘Power line communication(PLC)provides intelligent electrical functions such as power quality measurement,fault surveys,and remote control of electrical network.Most of research works have been done in low voltage(LV)scenario due to the fast development of in-home PLC.The aim of this paper is to evaluate the link-level performance of a medium voltage(MV)MIMO-OFDM communication system based on transmission link under underground power line channel.The MIMO channel is modeled as a modified multipath model in the presence of impulsive noise and background noise.We first perform a measurement on the practical MV MIMO channel parameters for a section of buried cable of 1 km long in Ganzhou city,Jiangxi province,China.Based on the measured channel,we design the frame structure based on an IEEE standard for broadband over power line networks[1]to support MV MIMO-OFDM transmission.According to designed frame structure,we design an encoder and a decoder for a dual binary tail-biting turbo code and optimize some key decoder parameters for low bit error rate performance.Finally,the link-level performance for both spatial multiplexing and spatial diversity are evaluated.Numeral results show that MV MIMO-OFDM is a promising approach to provide both high data rate and link reliability for PLC.
基金Supported by the National Science and Technology Major Project:Development of Large Oil-gas Fields&Coal-bed Methane(No.2011ZX05056)
文摘For studying the dynamic performance of subsea umbilical cable laying system and achieving the goal of cable tension and laying speed control,the rigid finite element method is used to discrete and transform the system into a rigid-flexible coupling multi-body system which consists of rigid elements and spring-damping elements.The mathematical model of subsea umbilical cable laying system kinematic chain is presented with the second order Lagrange equation in the joint coordinate system,and dynamic modeling and simulation is performed with ADAMS.The dynamic analysis is conducted assuming the following three statuses:ideal laying,practical laying under wave disturbance,and practical laying with tension compensation.Results show that motion disturbances of the laying budge under sea waves,especially with heaving and pitching,will cause relatively serious fluctuations in cable tension and laying speed.Tension compensation,i.e.,active back tension torque control can restrict continuous tension increasing or decreasing effectively and rapidly,thus avoiding cable breach or buckling.
基金supported by the National Natural Science Foundation of China (No.62001166)supported by the Natural Science Foundation of Hebei Province of China (E2019502186,F2019201362)supported by the Fundamental Research Funds for the Central Universities (2021MS073)。
文摘MIMO technique can provide higher information throughput and transmission reliability for the PLC system.However,the MIMO-PLC system based on three-conductor cable has a high correlation among its sub-channels.Spatial multiplexing technology will be affected by the spatial correlation between MIMO-PLC sub-channels.To reduce the system bit error rate caused by MIMO-PLC correlation among sub-channels,this paper proposed a phase rotation precoding scheme for the 2×2 closed-loop MIMO-PLC system.According to the channel transfer function of high correlation MIMO-PLC system,the phase rotation precoding matrix F is calculated,and the transmission signal matrix S is modulated with the F,the code distance at the receiving point with smallest code distance is increased by phase rotation.Simulation results show that the scheme can effectively reduce the bit error rate of the 2×2 MIMO-PLC system based on ML detection,and significantly improve the system performance.
基金provided by the National Basic Research Program of China (No. 2010CB226802)the Fundamental Research Funds for the Central Universities (No. 2010YZ02)the State Key Laboratory of Coal Resources and Safe Mining (No.SKLCRSM 10B08)
文摘The support of coal roadways is seriously affected by intense dynamic pressures.This can lead to problems with large deformation of the roof and the two side walls of coal roadways.Rapid convergence of the walls and roof,a high damage rate to the bolts and cables,or even abrupt roof collapse or rib spalling can occur during the service period of these coal roadways.Analyzing the main support measures used in China leads to a proposed new cable truss supporting system.Thorough study of the entire structure shows the superiority of this design for roadways suffering under dynamic pressure.A corresponding mechanical model of the rock surrounding the cable truss system is described in this paper and formulas for calculating pre-tightening forces of the truss cable,and the minimum anchoring forces,were deduced.The new support system was applied to a typical roadway affected by intensive dynamic pressure that is located in the Xinyuan Coal Mine.The results show that the largest subsidence of the roof was 97 mm,the convergence of the two sides was less than 248 mm,and the average depth of the loose,fractured layer was only 6.12 mm.This proves that the new support system is feasible and effective.
文摘To avoid stray current and maintain the benefit of no phase-split in the DC traction power supply system, an AC traction power supply system was proposed for the urban public transport such as metro and light rail transit. The proposed system consists of a main substation （MSS） and cable traction network （CTN）. The MSS includes a single-phase main traction transformer and a negative-se- quence compensation device, while the CTN includes double-core cables, traction transformers, overhead catenary system, rails, etc. Several key techniques for the proposed system were put forward and discussed, which can be summarized as （1） the power supply principle, equivalent circuit and transmission ability of the CTN, the cable-catenary matching technique, and the selection of catenary voltage level; （2） the segmentation technology and status identification method for traction power supply network, distributed and centralized protection schemes, etc.; （3） a power supply scheme for single-line MSS and a power supply scheme of MSS shared by two or more lines. The proposed industrial frequency single-phase AC traction power supply system shows an excellent technical performance, good economy, and high reliability, hence provides a new alternative for metro and urban rail transit power supply systems.
文摘Tree spars,as appropriate supports for cable yarding systems,have to beverified for the strength before any real operation.This paper gives theoretical analysisfor various cases.Tree spars without guylines are normally under heavy bending stress,which dominates the strength design.For tree spars equipped with guylines,the spardeflection follows the same way as an unguyed spar.The overload of the bending stressremains the main reason of spar failures.Several diversities of tree spars from theidealized condition are investigated for the sake of better modeling of the real situation.Analysis supports that the tree spar can generally be treated as a straight cylindricalcolumn without giving significant errors.The load can be handled as centrically applied.Design methods are provided for both guyed and unguyed tree spars,which will benefit thepractice of using tree spars as an alternative for steel spars.
文摘A high temperature superconductor （HTS） cable system of both a length of 4 metre and a normal current of 2 KA with terminations and a cooling system has been built up and tested. The cable conductor was made of Bi-2223 tape. A space maintained vacuum between two corrugated stainless steel tubes functions as the cryostat surrounding the superconductor. A series of tests were carried out to verify the functions of the system. The important data obtained can be used to make longer HTS cable systems.
文摘The high reliability of the communication system is critical in metro and mining applications for personal safety,channel optimization,and improving operational performance.This paper surveys the progress of wireless communication systems in underground environments such as tunnels and mines from 1920 to 2022,including the evolution of primitive technology,advancements in channel modelling,and realization of various wireless propagation channels.In addition,the existing and advanced channel modeling strategies,which include the evolution of different technologies and their applications;mathematical,analytical,and experimental techniques for radio propagation;and significance of the radiation characteristics,antenna placement,and physical environment of multiple-input multiple-output(MIMO)communication systems,are analyzed.The given study introduces leaky coaxial cable(LCX)and distributed antenna system(DAS)designs for improving narrowband and wideband channel capacity.The paper concludes by figuring out open research areas for the future technologies.
文摘The transmission characteristics of video transmission mediums,coaxial ca ble and optical fiber,are discussed in the paper. The formulas for frequency bandwidth are given to evaluate the video transmission distance. For typical video transmission systems with BB/IM and PFM/IM tising optical fiber as the channel, expressions and calculating results for both S/N and sensitivity are given. Finally, the principle for se lecting different type of transmission systems according to transmission distances of the industrial TV is presented.
基金Supported by Electronic Science Research Institute of China (No. BD02371)
文摘Rotorcraft in low-level flight is endangered by power lines or telephone wires. The development of automation tools that can detect obstacles in the flight path and warn the crew would significantly reduce pilot workload and increase safety. Therefore, a cable detection radar system is developed The real-time dynamic imaging synchronizing with radar space scanning has been implemented in developed ladar system. The requirements of the flight mission to prevent ＂wire strike＂ are analyzed and estimated, the advantages and disadvantages of the millimeter wave system with the laser system are weighted The result shows that Laser system is the best suited for helicopter avoidance obstacle. In addition, several design gist of detecting wire radar that was used in the developed ladar system is proposed and the developed zero backlash imaging technology and several advanced warning function are described. The detailed results of system ground tests and the performances description are presented The ground test of the developed ladar system has demonstrated that the developed imaging ladar system performance can achieve and satisfy the requirements of the mission to prevent ＂wire strike＂.
基金This work was supported in part by the Chinese Ministry of Science and Technology under Grant No. 2002AA306154, 2004AA306110,2005AA306120 and 2006AA03Z207the Beijing Municipal Scienceand Technology Commission under Grant No. H020420010210the Yunnan Provincial Science and Technology Department under Grant No.2003BABCA05A041 and 2003530101000415.
文摘A 33.5 m, 35 kV/121 MVA, three-phase, warm dielectric HTS power cable system was successfully installed and activated in China Southern Power Grid at the Puji substation in Kunming on April 19th of 2004, supplying electricity to four industrial customers （including two metallurgical refineries） and a residential population of about 100000. In this paper, we give an update on the operation and maintenance status of the system and comments on reliability issues. We conclude that the superconducting cable system is currently quite robust and feasible for particular utility applications, and it will be improved by advancement in cryogenic equipment and system technology.
基金partially funded by National Natural Science Foundation of China(Nos.52179098 and 41907251).
文摘High stress in surrounding rock will lead to serious problems,e.g.,rock burst in hard rock and large deformation in soft rock.The applied support system under high in-situ stress conditions should be able to carry high load and also accommodate large deformation without experiencing severe damage.In this paper,a specially designed energy-absorbing component for rock bolt and cable that can solve the above problems was proposed.The energy-absorbing component can provide support resistance by plastic deformation of the metal including constraint annulus and compression pipe.For practical engineering,two forms were proposed.One was installed in the surrounding rock by reaming,and the other was installed directly outside the surrounding rock.During the dilation of the surrounding rock,the relative displacement of constraint annulus and compression pipe occurs,resulting in deformation resistance.Deformation resistance is transmitted to the rock bolt or cable,providing support resistance.The lab test and numerical simulation showed that the energy-absorbing component can perfectly achieve the large deformation effect,the deformation amount is as high as 694 mm,and the bearing capacity is stable at 367 kN.The field application tests were carried out in the mining roadway of Xinjulong coal mine,and the results showed that the new type of cable can ensure itself not to break under the condition of large deformation of the surrounding rock.The energy-absorbing component has the superiorities of performing large constant resistance and controllable deformation to effectively control the unpredictable disasters such as large deformation in soft rock and rock burst in hard rock encountered in deep strata.
基金Financial support for this research was provided by the National Natural Science Foundation of China (Grant No.52222111)。
文摘The umbilical cable is a vital component of subsea production systems that provide power,chemical agents,control signals et al.,and its requirement for reliability is exceedingly high.However,as the umbilical cable is a composite structure comprising multiple functional units,the reliability analysis of such cables involves numerous parameters that can impact calculation efficiency.In this paper,the reliability analysis of a new kind of umbilical cable with carbon fiber rod under tension is analyzed.The global dynamic analytical model is first established to determine the maximum tension load,then the local analytical model of umbilical cable including each unit are constructed by finite element method(FEM).Based on the mechanical analytical model,the reliability of umbilical cable under tension load is studied using response surface method(RSM)and Monte Carlo method.During the calculation process,a new tangent plane sampling method to calculate the response surface function(RSF)is proposed in this paper,which could make sampling points faster come close to the RSF curve,and it is proved that the calculation efficiency increases about 33%comparing with traditional method.
基金supported by the National Natural Science Foundation of China through Grant No.51978523.
文摘Excavating super-large-span tunnels in soft rock masses presents significant challenges.To ensure safety,the sequential excavation method is commonly adopted.It utilizes internal temporary supports to spatially partition the tunnel face and divide the excavation into multiple stages.However,these internal supports generally impose spatial constraints,limiting the use of large-scale excavation equipment and reducing construction efficiency.To address this constraint,this study adopts the“Shed-frame”principle to explore the feasibility of an innovative support system,which aims to replace internal supports with prestressed anchor cables and thus provide a more spacious working space with fewer internal obstructions.To evaluate its effectiveness,a field case involving the excavation of a 24-m span tunnel in soft rock is presented,and an analysis of extensive field data is conducted to study the deformation characteristics of the surrounding rock and the mechanical behavior of the support system.The results revealed that prestressed anchor cables integrated the initial support with the shed,creating an effective“shed-frame”system,which successively maintained tunnel deformation and frame stress levels within safe regulatory bounds.Moreover,the prestressed anchor cables bolstered the surrounding rock effectively and reduced the excavation-induced disturbance zone significantly.In summary,the proposed support system balances construction efficiency and safety.These field experiences may offer valuable insights into the popularization and further development of prestressed anchor cable support systems.
