Design and optimization of bushing at present mainly use the traditional experience method.The relevant research that adopts computer simulation to carry on the operation behavior of the bushing has appeared in recent...Design and optimization of bushing at present mainly use the traditional experience method.The relevant research that adopts computer simulation to carry on the operation behavior of the bushing has appeared in recent years.How to use the finite element method to research bushing was introduced in the article.Physics fields and many relevant parameters of one real bushing were calculated.Through the results of calculation,it indicate that the finite element method is very useful in bushing research of designing and optimizing.展开更多
In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bus...In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.展开更多
A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating ch...A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating characteristics. The operability of the design was confirmed when solving two problems of special technological complexity. 1. 400 and 800 orifice bushings for production of continuous fibers from the basalt melt have been developed and recommended for manufacture. 2. The process of production of continuous fibers from standard glass using 2400 orifice bushing with perforated plates instead of orifice tips without air cooling, has been realized for the first time.展开更多
以某型号着陆器软着陆机构为研究对象,采用MSC.Patran/Nastran对软着陆机构进行模态分析,得到结构模态的主要影响因素,主要包括机构尺寸和装配连接方式.主要分析了软着陆机构中主支柱、辅助支柱活塞杆和活塞筒壁厚、以及活塞筒端盖厚度...以某型号着陆器软着陆机构为研究对象,采用MSC.Patran/Nastran对软着陆机构进行模态分析,得到结构模态的主要影响因素,主要包括机构尺寸和装配连接方式.主要分析了软着陆机构中主支柱、辅助支柱活塞杆和活塞筒壁厚、以及活塞筒端盖厚度对模态频率的影响,并对主支柱、辅助支柱活塞杆和活塞筒装配连接方式进行研究,接着提出一种基于Bush单元的装配连接方式,有效地解决了传统方法中用MPC(Multiple Point Constraint)刚性连接来模拟装配连接的不足,使仿真结果更加准确.最后对收拢状态下的模型进行了频率响应分析,结果发现在给定的频率范围内结构不会发生共振,进一步说明结构设计的合理性.展开更多
A survey about OJSC "SIC Supermetal'" as a processor of secondary precious metal raw materials and a manufacturer of precious metal products for technical purposes,has been presented.Brief information ha...A survey about OJSC "SIC Supermetal'" as a processor of secondary precious metal raw materials and a manufacturer of precious metal products for technical purposes,has been presented.Brief information has been given about the basic technologies and materials used in production,including dispersion strengthened materials on the basis of platinum alloys and laminar composites.展开更多
基金National Science Foundation of China Yunnan United Foundation.(U0837601)the Natural Science Foundation of Yunnan Province,China(2010CF126)
文摘Design and optimization of bushing at present mainly use the traditional experience method.The relevant research that adopts computer simulation to carry on the operation behavior of the bushing has appeared in recent years.How to use the finite element method to research bushing was introduced in the article.Physics fields and many relevant parameters of one real bushing were calculated.Through the results of calculation,it indicate that the finite element method is very useful in bushing research of designing and optimizing.
文摘In this paper,glass fibers were prepared by centrifugal-spinneret-blow(CSB) process.The molten glass got different flow rate from 390 kg/h to 270 kg/h by adjusting the electric current of platinum/10 rhodium alloy bushing.The diameter and microstructure of glass fibers have been investigated by scanning electron microscopy(SEM) and vertical optical microscope(VOM).The results indicated that the flow rate of molten glass was proportional to the diameter of glass fibers when the molten glass got main flow rate of 330 kg/h.The lower the flow rate was,the finer the average diameter was.
文摘A design of a slot bushing with a volumetric field has been developed, which allows to produce continuous fibers from melts with difficult processing characteristics in order to produce fibers with better operating characteristics. The operability of the design was confirmed when solving two problems of special technological complexity. 1. 400 and 800 orifice bushings for production of continuous fibers from the basalt melt have been developed and recommended for manufacture. 2. The process of production of continuous fibers from standard glass using 2400 orifice bushing with perforated plates instead of orifice tips without air cooling, has been realized for the first time.
文摘以某型号着陆器软着陆机构为研究对象,采用MSC.Patran/Nastran对软着陆机构进行模态分析,得到结构模态的主要影响因素,主要包括机构尺寸和装配连接方式.主要分析了软着陆机构中主支柱、辅助支柱活塞杆和活塞筒壁厚、以及活塞筒端盖厚度对模态频率的影响,并对主支柱、辅助支柱活塞杆和活塞筒装配连接方式进行研究,接着提出一种基于Bush单元的装配连接方式,有效地解决了传统方法中用MPC(Multiple Point Constraint)刚性连接来模拟装配连接的不足,使仿真结果更加准确.最后对收拢状态下的模型进行了频率响应分析,结果发现在给定的频率范围内结构不会发生共振,进一步说明结构设计的合理性.
文摘A survey about OJSC "SIC Supermetal'" as a processor of secondary precious metal raw materials and a manufacturer of precious metal products for technical purposes,has been presented.Brief information has been given about the basic technologies and materials used in production,including dispersion strengthened materials on the basis of platinum alloys and laminar composites.
