According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas...According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas relative permeability and effective viscosity under the condition of miscible flow. In order to predict the production performance（fast,） streamline method is employed to solve this model as an alternative to traditional finite（difference） （methods.） Based on streamline distribution of steady-state flow through porous media with complex boundary confirmed with the boundary element method （BEM）, an explicit total variation diminishing （TVD） method is used to solve the one-dimensional flow problem. At the same time, influences of development scheme, solvent slug size, and injection periods on CO2 drive recovery are discussed. The model has the advantages of less（information） need, fast calculation, and adaptation to calculate CO2 drive performance of all kinds of patterns in a random shaped porous media with assembly boundary. It can be an（effective） tool for early stage screening and reservoir dynamic management of the CO2（miscible） oil field.展开更多
Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel...Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel water inrush was proposed based on improved attribute mathematical theory.The trigonometric functions were adopted to optimize the attribute mathematical theory,avoiding the influence of mutation points and linear variation zones in traditional linear measurement functions on the accuracy of the model.Based on comprehensive analysis of various factors,five parameters were selected as the evaluation indicators for the model,including tunnel head pressure,permeability coefficient of surrounding rock,crushing degree of surrounding rock,relative angle of joint plane and tunnel section size,under the principle of dimension rationality,independence,directness and quantification.The indicator classifications were determined.The links among measured data were analyzed in detail,and the objective weight of each indicator was determined by using similar weight method.Thereby the tunnel water inrush risk assessment model is established and applied in four target segments of two different tunnels in engineering.The evaluation results and the actual excavation data agree well,which indicates that the model is of high credibility and feasibility.展开更多
Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape not...Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.展开更多
Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for...Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.展开更多
Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematica...Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.展开更多
Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for ...Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for computing the load was presented. An optimization problem was formulated to determine the attitude of the flexible guidance based on the principle that the potential energy stored in the system was the minimum at the equilibrium. Then the friction force was obtained according to the attitude of guide leaves and the moving velocity of the feed belt and the friction factor. Consequently, the load of the automatic feed mechanism can be calculated. Finally, an example was given to compute the load when the horizontal and elevating firing angles of the automation were respectively 45° and 30°. The computing result can be a criterion to determine the designing parameters of automat.展开更多
Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination ...Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.展开更多
In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characte...In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.展开更多
Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the...Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.展开更多
Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state...Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.展开更多
Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to p...Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.展开更多
A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simul...A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.展开更多
Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated ...Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.展开更多
The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and rel...The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and reliability of the mathematical model was verified by calculating index weights and comprehensive evaluation scores.In this paper,11 indicators were selected to construct a comprehensive evaluation system from four dimensions of yields,resistances,contents of main inclusions in seeds and tree shapes.AHP method was applied to calculate the index weight of each dimension,after passing the consistency test,FCE method was applied to comprehensively evaluate germplasm resources of S.nobilis Smith.The index weights of the yields,resistances,contents of major inclusions in seeds and tree shapes were 0.5518,0.2554,0.1279 and 0.0649,respectively.The yield had the greatest influence on the comprehensive evaluation of germplasm resources of S.nobilis Smith,which was in line with the actual production demand of S.nobilis Smith as a food crop.However,resistances and contents of major inclusions in seeds had limited influence on it,while tree shapes had the least influence on it.After fuzzy comprehensive evaluation,the final evaluation score was 88.00,the corresponding evaluation score was between 4 and 5,and the evaluation results ranged from slight good to good,which indicated that the evaluation weights corresponding to the four dimensions were more scientific and reasonable.In this study,the mathematical model of AHP-FCE was used to establish and evaluate the comprehensive evaluation system of the germplasm resources of S.nobilis Smith.According to the values of index weights and the evaluation results,it showed that the mathematical model was scientific and reliable,and it could provide a new reference method for the comprehensive evaluation of germplasm resources of other fruits.展开更多
Objective To explore the correlation between volume rendering(VR) statistics of medial clavicular epiphysis and living age,and establish the mathematical models for living age evaluation using the CT image of medial c...Objective To explore the correlation between volume rendering(VR) statistics of medial clavicular epiphysis and living age,and establish the mathematical models for living age evaluation using the CT image of medial clavicular epiphysis based on the growth rules of osteoepiphysis of medial clavicle.Methods The CT images of the medial clavicles from 795 teenagers aged 15-25,387 males and 408 females,were collected in East and South China.VR 3D images were reconstructed from 0.60 mm-thick slice CT images.The epiphyseal diameter,sternal end diameter,and their respective diameter ratio(the left: x 1;the right: x 3);epiphyseal area,sternal end area,and their respective area ratio(the left: x 2;the right: x 4),were measured and calculated.All these observations were analyzed using SPSS 19.0 statistical software.The statistical differences in gender and age were analyzed by Mann-Whitney U test.The mathematical models were established using least square.Sixty trained subjects,30 males and 30 females,were tested to verify the accuracy of the established mathematical models.Results In the group of same age,x 1 showed significant difference in gender;the same results were observed in x 2,x 3,and x 4,which suggested that the growth rules of osteoepiphysis of medial clavicle were highly correlated with living age.The accuracy of these mathematical models were all above 67.6%(±1.0 year) and 78.5%(±1.5 year).Conclusion The mathematical models with reasonable accuracy could be manageable in practice to confirm the conclusion of the atlas method.The current study can contribute to the single skeletal age evaluation.展开更多
Mathematical modelling for power DC/DC converters is a historical problem accompanying DC/DC conversion technology since 1940’s. The traditional mathematical modelling is not available for complex structure converter...Mathematical modelling for power DC/DC converters is a historical problem accompanying DC/DC conversion technology since 1940’s. The traditional mathematical modelling is not available for complex structure converters since the differential equation order increases very high. We have to search other way to establish mathematical modelling for power DC/DC converters.We have theoretically defined a new concept-Energy Factor （EF） in this paper and researched the relations between EF and the mathematical modelling for power DC/DC converters. EF is a new concept in power DC/DC conversion technology, which thoroughly differs from the traditional concepts such as power factor （PF）, power transfer efficiency （η）, total harmonic distortion （THD） and ripple factor （RF）. EF and the subsequential EFV (and EFVD) can illustrate the system stability, reference response and interference recovery. This investigation is very helpful for system design and DC/DC converters characteristics foreseeing. Two DC/DC converters: Buck converter and Super-Lift Luo-Converter as the samples are analysed in this paper to demonstrate the applications of EF, EFV (and EFVD), PE, SE, VE （and VED）, time constant τ and damping time constant τd.展开更多
A novel cooling system combining ultra fast cooling rigs with laminar cooling devices was investigated.Based on the different cooling mechanisms,a serial of mathematic models were established to describe the relations...A novel cooling system combining ultra fast cooling rigs with laminar cooling devices was investigated.Based on the different cooling mechanisms,a serial of mathematic models were established to describe the relationship between water flow and spraying pressure and the relationship between water spraying heat flux and layout of nozzles installed on the top and bottom cooling headers.Model parameters were validated by measured data.Heat transfer models including air convection model,heat radiation model and water cooling capacity model were detailedly introduced.In addition,effects on cooling capacity by water temperature and different valve patterns were also presented.Finally,the comparison results from UFC used or not have been provided with respect to temperature evolution and mechanical properties of Q235B steel grade with thickness of 7.8 mm.Since online application of the sophisticated CTC process control system based on these models,run-out table cooling control system has been running stably and reliably to produce resource-saving,low-cost steels with smaller grain size.展开更多
A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles ...A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles of face-milling spiral bevel gears.Unlike straight non-circular bevel gears,spiral non-circular bevel gears have numerous advantages,such as a high contact ratio,high intensity,good dynamic performance,and an adjustable contact region.In addition,while manufacturing straight non-circular bevel gears is difficult,spiral non-circular bevel gears can be efficiently and precisely fabricated with a 6-axis bevel gear cutting machine.First,the generating principles of spiral non-circular bevel gears were introduced.Next,a mathematical model,including a generating tooth profile,tooth spiral,pressure angle,and generated tooth profile for this gear type was established.Then the precision of the model was verified by a tooth contact analysis using FEA,and the contact patterns and stress distributions of the spiral non-circular bevel gears were investigated.展开更多
To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential e...To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential equations (ODEs) were required to solve. A typical fire modelling with two-room structure was studied. Accordingly,the source terms included in the ODEs were simplified and modelled,and the fourth Runge-Kutta method was used to solve the ordinary differential equations (ODEs) with symbolic mathematics. Then a zone model could be used with symbolic mathematics. It is proposed that symbolic mathematics is possible for use by fire engineer.展开更多
According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most import...According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most important is to analyze an influence of the atmospheric electricity on the air and ground, create an exact mathematical model of the physical processes,and describe the ecological influence.展开更多
文摘According to the research theory of improved black oil simulator, a practical mathematical model for CO2 miscible flooding was presented. In the model, the miscible process simulation was realized by adjusting oil/gas relative permeability and effective viscosity under the condition of miscible flow. In order to predict the production performance（fast,） streamline method is employed to solve this model as an alternative to traditional finite（difference） （methods.） Based on streamline distribution of steady-state flow through porous media with complex boundary confirmed with the boundary element method （BEM）, an explicit total variation diminishing （TVD） method is used to solve the one-dimensional flow problem. At the same time, influences of development scheme, solvent slug size, and injection periods on CO2 drive recovery are discussed. The model has the advantages of less（information） need, fast calculation, and adaptation to calculate CO2 drive performance of all kinds of patterns in a random shaped porous media with assembly boundary. It can be an（effective） tool for early stage screening and reservoir dynamic management of the CO2（miscible） oil field.
基金Project(2013CB036004) supported by National Basic Research Program(973)of ChinaProject(51378510) supported by National Natural Science Foundation of China
文摘Tunnel water inrush is one of the common geological disasters in the underground engineering construction.In order to effectively evaluate and control the occurrence of water inrush,the risk assessment model of tunnel water inrush was proposed based on improved attribute mathematical theory.The trigonometric functions were adopted to optimize the attribute mathematical theory,avoiding the influence of mutation points and linear variation zones in traditional linear measurement functions on the accuracy of the model.Based on comprehensive analysis of various factors,five parameters were selected as the evaluation indicators for the model,including tunnel head pressure,permeability coefficient of surrounding rock,crushing degree of surrounding rock,relative angle of joint plane and tunnel section size,under the principle of dimension rationality,independence,directness and quantification.The indicator classifications were determined.The links among measured data were analyzed in detail,and the objective weight of each indicator was determined by using similar weight method.Thereby the tunnel water inrush risk assessment model is established and applied in four target segments of two different tunnels in engineering.The evaluation results and the actual excavation data agree well,which indicates that the model is of high credibility and feasibility.
基金Project(51004085)supported by the National Natural Science Foundation of China
文摘Precise function expression of the flow area for the sloping U-shape notch orifice versus the spool stroke was derived. The computational fluid dynamics was used to analyze the flow features of the sloping U-shape notch on the spool, such as mass flow rates, flow coefficients, effiux angles and steady state flow forces under different operating conditions. At last, the reliability of the mathematical model of the flow area for the sloping U-shape notch orifice on the spool was demonstrated by the comparison between the orifice area curve derived and the corresponding experimental data provided by the test. It is presented that the bottom arc of sloping U-shape notch （ABU） should not be omitted when it is required to accurately calculate the orifice area of ABU. Although the theoretical flow area of plain bottom sloping U-shape notch （PBU） is larger than that of ABU at the same opening, the simulated mass flow and experimental flow area of ABU are both larger than these of PBU at the same opening, while the simulated flow force of PBU is larger than that of ABU at the same opening. Therefore, it should be prior to adapt the ABU when designing the spool with proportional character.
基金Project(NCET-05-0630) supported by Program for New Century Excellent Talents in University of China
文摘Rotary kiln process for iron ore oxide pellet production is hard to detect and control.Construction of one-dimensional model of temperature field in rotary kiln was described.And the results lay a solid foundation for online control.Establishment of kiln process control expert system was presented,with maximum temperature of pellet and gas temperature at the feed end as control cores,and interval estimate as control strategy.Software was developed and put into application in a pellet plant.The results show that control guidance of this system is accurate and effective.After production application for nearly one year,the compressive strength and first grade rate of pellet are increased by 86 N and 2.54%,respectively,while FeO content is 0.05% lowered.This system can reveal detailed information of real time kiln process,and provide a powerful tool for online control of pellet production.
基金Project(NCET050630) supported by Program for New Century Excellent Talents in University,China
文摘Grate process is an important step in grate-kiln pellet production.However,as a relatively closed system,the process on grate is inaccessible to direct detection,therefore,it is hard to control.As a result,mathematical models of temperature distribution,moisture distribution and oxidation degree distribution in pellet bed,with good universality,computation speed and calculation accuracy,are presented based on analysis of heat transfer and physical-chemical reactions during grate process.And real-time visualization of temperature,moisture and oxidation degree distribution in pellet bed during grate process is realized.Model validation is displayed,and the similarity of 91% is proved.The results can reveal real time status on grate,and provide a solid foundation for the subsequent study of artificial intelligence control system of pellet production.
基金Project supported by the Seventh Research Institute of China State Shipbuilding Corporation
文摘Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for computing the load was presented. An optimization problem was formulated to determine the attitude of the flexible guidance based on the principle that the potential energy stored in the system was the minimum at the equilibrium. Then the friction force was obtained according to the attitude of guide leaves and the moving velocity of the feed belt and the friction factor. Consequently, the load of the automatic feed mechanism can be calculated. Finally, an example was given to compute the load when the horizontal and elevating firing angles of the automation were respectively 45° and 30°. The computing result can be a criterion to determine the designing parameters of automat.
文摘Linked tetra shaft and double cantilever flat flap gate is a new type of structure in water conservancy projects,but the traditional method is now adopted in its design.In order to the application and dissemination of the type of sluice,this paper researches the difficult points of design advance,through researching the motion locus & stress coundition of linked tetra shaft system.The writer will build up the mathmatical model and handle it with the computer.Thus,we can achieve the modern desing on the basis of the software of linked tetra shaft system development.
基金Project(7131109)supported by the National Defense Pre-research Foundation of ChinaProject(51175500)supported by the National Natural Science Foundation of China
文摘In order to study the major performance indicators of the twin-rotor piston engine(TRPE), Matlab/simulink was used to simulate the mathematical models of its thermodynamic processes. With consideration of the characteristics of the working processes in the TRPE, corresponding differential equations were established and then simplified by period features of the TRPE. Finally, the major boundary conditions were figured out. The changing trends of mass, pressure and temperature of working fuel in the working chamber during a complete engine cycle were presented. The simulation results are consistent with the trends of an actual working cycle in the TRPE, which indicates that the method of simulation is feasible. As the pressure in the working chamber is calculated, all the performance parameters of the TRPE can be obtained. The major performance indicators, such as the indicated mean effective pressure, power to weight ratio and the volume power, are also acquired. Compared with three different types of conventional engines, the TRPE has a bigger utilization ratio of cylinder volume, a higher power to weight ratio and a more compact structure. This indicates that TRPE is superior to conventional engines.
文摘Based on 30MnSiV steel, the deformation resistance was studied by using Gleeble 1500 thermomechanical simulator. The mathematical model of the deformation resistance is established by analyzing the relationship of the deformation temperature, deformation rate and deformation resistance. The regression equation is highly noticeable by means of regression analysis. The mathematical model corresponds to test data by means of the contrast.
基金This project was supported by the National Key program of Science and Technology(99-A29-0101).
文摘Two mathematical models are developed in this paper to study the effectiveness of system administration efforts on the improvement of system availability, based on the assumption that there exists a transitional state for a computer system in operation before it is brought down by some hardware or software problems and with intensified system administration efforts, it is possible to discover and fix the problems in time to bring the system back to normal state before it is down. Markov chain is used to simulate the transition of system states. A conclusion is made that increasing system administration efforts may be a cost-effective way to meet the requirements for moderate improvement on system availability, but higher demand on this aspect still has to be met by advanced technologies.
文摘Juice extraction from chopped sweet sorghum is an example of flow through porous media. Darcy’s law is often used to express this type of phenomenon. However, using Darcy’s law to construct a mathematical model to predict juice extraction from chopped sweet sorghum is difficult, because the volume of the porous media changes during the pressing operations. A mathematical model was developed from fundamental analysis to predict the juice extraction ratio of chopped sweet sorghum, and experiments were conducted to verify the model. An experimental piston-cylinder assembly was developed to conduct the validation experiments. The parameters in the developed model were estimated by using non-linear regression analysis from the experimental data. Plots of the mathematical model agreed well with experimental data. R^2（coefficient of determination） values for all the regressions studied were higher than 0.99. Results showed that the juice extraction ratio of chopped sweet sorghum approached an asymptote with a maximum value that depended on the physical form of the sample. The model could help in understanding the mechanics of juice extraction from chopped sweet sorghum.
文摘A mathematical simulating model of phased-array antenna in multifunction array radar has been approached in this paper, including the mathematical simulating model of plane phased-array pattern, the mathematical simulating model of directionality factor, the mathematical simulating model of array factor, the mathematical simulating model of array element factor and the mathematical simulating model of beam steering.
文摘Thermoregulatory mathematical models have being developed for more than half a century and obtained more and more wide application. Among them, the 'engineering-physiological' thermal models, which correlated closely to the man-machine-environment system, are the ones that developed most rapidly and have been widely accepted by thermal physiologists and environmental control engineers.This paper attempts to outline briefly the development and application of such kind of thermal models, discusses how to further develop and apply various combined thermal models in practice, and puts forward four respects of suggestions for establishment and modification of combined thermal models of man-clothing-cabin environment.
基金Supported by the National Natural Science Foundation of China(31860533)Science and Technology Major Project of Guangxi(GuikeAA17204045-4)Special Funds for Guiding Local Scientific and Technological Development by the Central Government(GuikeZY19183010)。
文摘The mathematical model of analytic hierarchy process(AHP)-fuzzy comprehensive evaluation(FCE)was applied to comprehensively evaluate the germplasm resources of Sterculia nobilis Smith,and the scientific nature and reliability of the mathematical model was verified by calculating index weights and comprehensive evaluation scores.In this paper,11 indicators were selected to construct a comprehensive evaluation system from four dimensions of yields,resistances,contents of main inclusions in seeds and tree shapes.AHP method was applied to calculate the index weight of each dimension,after passing the consistency test,FCE method was applied to comprehensively evaluate germplasm resources of S.nobilis Smith.The index weights of the yields,resistances,contents of major inclusions in seeds and tree shapes were 0.5518,0.2554,0.1279 and 0.0649,respectively.The yield had the greatest influence on the comprehensive evaluation of germplasm resources of S.nobilis Smith,which was in line with the actual production demand of S.nobilis Smith as a food crop.However,resistances and contents of major inclusions in seeds had limited influence on it,while tree shapes had the least influence on it.After fuzzy comprehensive evaluation,the final evaluation score was 88.00,the corresponding evaluation score was between 4 and 5,and the evaluation results ranged from slight good to good,which indicated that the evaluation weights corresponding to the four dimensions were more scientific and reasonable.In this study,the mathematical model of AHP-FCE was used to establish and evaluate the comprehensive evaluation system of the germplasm resources of S.nobilis Smith.According to the values of index weights and the evaluation results,it showed that the mathematical model was scientific and reliable,and it could provide a new reference method for the comprehensive evaluation of germplasm resources of other fruits.
基金funded by the Natural ScienceFund Projects(81102305)the 12th five-year National Science and Technology Support Project(2012BAK16B01)+1 种基金Fund Projects of Institute of Forensic Science,Ministry of Justice,P.R.China(2011-1)the Council of Shanghai Key Laboratory of Forensic Medicine(13DZ2271500)
文摘Objective To explore the correlation between volume rendering(VR) statistics of medial clavicular epiphysis and living age,and establish the mathematical models for living age evaluation using the CT image of medial clavicular epiphysis based on the growth rules of osteoepiphysis of medial clavicle.Methods The CT images of the medial clavicles from 795 teenagers aged 15-25,387 males and 408 females,were collected in East and South China.VR 3D images were reconstructed from 0.60 mm-thick slice CT images.The epiphyseal diameter,sternal end diameter,and their respective diameter ratio(the left: x 1;the right: x 3);epiphyseal area,sternal end area,and their respective area ratio(the left: x 2;the right: x 4),were measured and calculated.All these observations were analyzed using SPSS 19.0 statistical software.The statistical differences in gender and age were analyzed by Mann-Whitney U test.The mathematical models were established using least square.Sixty trained subjects,30 males and 30 females,were tested to verify the accuracy of the established mathematical models.Results In the group of same age,x 1 showed significant difference in gender;the same results were observed in x 2,x 3,and x 4,which suggested that the growth rules of osteoepiphysis of medial clavicle were highly correlated with living age.The accuracy of these mathematical models were all above 67.6%(±1.0 year) and 78.5%(±1.5 year).Conclusion The mathematical models with reasonable accuracy could be manageable in practice to confirm the conclusion of the atlas method.The current study can contribute to the single skeletal age evaluation.
文摘Mathematical modelling for power DC/DC converters is a historical problem accompanying DC/DC conversion technology since 1940’s. The traditional mathematical modelling is not available for complex structure converters since the differential equation order increases very high. We have to search other way to establish mathematical modelling for power DC/DC converters.We have theoretically defined a new concept-Energy Factor （EF） in this paper and researched the relations between EF and the mathematical modelling for power DC/DC converters. EF is a new concept in power DC/DC conversion technology, which thoroughly differs from the traditional concepts such as power factor （PF）, power transfer efficiency （η）, total harmonic distortion （THD） and ripple factor （RF）. EF and the subsequential EFV (and EFVD) can illustrate the system stability, reference response and interference recovery. This investigation is very helpful for system design and DC/DC converters characteristics foreseeing. Two DC/DC converters: Buck converter and Super-Lift Luo-Converter as the samples are analysed in this paper to demonstrate the applications of EF, EFV (and EFVD), PE, SE, VE （and VED）, time constant τ and damping time constant τd.
基金Project(51034009)supported by the National Natural Science Foundation of China
文摘A novel cooling system combining ultra fast cooling rigs with laminar cooling devices was investigated.Based on the different cooling mechanisms,a serial of mathematic models were established to describe the relationship between water flow and spraying pressure and the relationship between water spraying heat flux and layout of nozzles installed on the top and bottom cooling headers.Model parameters were validated by measured data.Heat transfer models including air convection model,heat radiation model and water cooling capacity model were detailedly introduced.In addition,effects on cooling capacity by water temperature and different valve patterns were also presented.Finally,the comparison results from UFC used or not have been provided with respect to temperature evolution and mechanical properties of Q235B steel grade with thickness of 7.8 mm.Since online application of the sophisticated CTC process control system based on these models,run-out table cooling control system has been running stably and reliably to produce resource-saving,low-cost steels with smaller grain size.
基金Project(52175361)supported by the National Natural Science Foundation of ChinaProject(2019 CFA 041)supported by the Natural Science Foundation of Hubei Province,ChinaProject(WUT:202407002)supported by the Fundamental Research Funds for the Central Universities,China。
文摘A novel spiral non-circular bevel gear that could be applied to variable-speed driving in intersecting axes was proposed by combining the design principles of non-circular bevel gears and the manufacturing principles of face-milling spiral bevel gears.Unlike straight non-circular bevel gears,spiral non-circular bevel gears have numerous advantages,such as a high contact ratio,high intensity,good dynamic performance,and an adjustable contact region.In addition,while manufacturing straight non-circular bevel gears is difficult,spiral non-circular bevel gears can be efficiently and precisely fabricated with a 6-axis bevel gear cutting machine.First,the generating principles of spiral non-circular bevel gears were introduced.Next,a mathematical model,including a generating tooth profile,tooth spiral,pressure angle,and generated tooth profile for this gear type was established.Then the precision of the model was verified by a tooth contact analysis using FEA,and the contact patterns and stress distributions of the spiral non-circular bevel gears were investigated.
基金Project(PolyU B-Q01e) supported by the Research Project "Onsetting of Internal Fire Whirls in Buildings and Associated Safet Provision"
文摘To apply the fire modelling for the fire engineer with symbolic mathematics,the key equations of a zone model were demonstrated. There were thirteen variables with nine constraints,so only four ordinary differential equations (ODEs) were required to solve. A typical fire modelling with two-room structure was studied. Accordingly,the source terms included in the ODEs were simplified and modelled,and the fourth Runge-Kutta method was used to solve the ordinary differential equations (ODEs) with symbolic mathematics. Then a zone model could be used with symbolic mathematics. It is proposed that symbolic mathematics is possible for use by fire engineer.
文摘According to trends of the development the high-voltage devices’ usage and unpredictable weather causes,we find it very important to research electrical discharge from different sources.In our opinion,the most important is to analyze an influence of the atmospheric electricity on the air and ground, create an exact mathematical model of the physical processes,and describe the ecological influence.
