A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic syste...A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization.展开更多
For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Ai...For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.展开更多
For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmissi...For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function.展开更多
In the present study,hydraulic and thermal behavior of an automatic transmission nano-fluid(ATNF) inside a tube with a twisted tape has been investigated.The heat transfer improvement and pressure drop of transmission...In the present study,hydraulic and thermal behavior of an automatic transmission nano-fluid(ATNF) inside a tube with a twisted tape has been investigated.The heat transfer improvement and pressure drop of transmission oil for each of case of using twisted tape and nano-particles were also examined separately and compared with each other.The Cu O nano-particles were used to prepare the ATNF.The effects of different Reynolds numbers and different mass fractions of nano-particle were investigated.The results showed that applying nano-particles and twisted tape simultaneously increases both the pressure drop and Nusselt number,on average by about 53% and 76%,respectively.By using a parameter,namely thermal performance index η,the effect of increasing heat transfer and pressure drop was studied simultaneously.The heat transfer improvement predominates the pressure drop increment in all cases.It was observed that the highest thermal performance of 1.9 was obtained at Re=634 and Φ=2%.Furthermore,regarding the increment of the Nu number,it was shown that the use of twisted tapes individually could increase the average Nu number by 41%,while the max increment arising from individual use of 2% nano-particles is 13%,so using twisted tape is a more effective-technique for this case study.展开更多
In order to realize the computer aided design of AT shifting element schemes, a mathematical model of shifting element schemes which can be easily identified by computers was built. Taking the transmission ratio seque...In order to realize the computer aided design of AT shifting element schemes, a mathematical model of shifting element schemes which can be easily identified by computers was built. Taking the transmission ratio sequence as an optimization objective and simple shifting logic between adjacent gears through operating only one shifting element as a constraint condition, a fitness function of shifting element schemes was proposed. ZF-8AT shifting element schemes were optimized based on GA work-box of MATLAB, and the feasibility of the optimization algorithm was verified.展开更多
基金Project(911901204) supported by Youth Innovation Foundation of Beijing University of Aeronautics and Astronautics
文摘A new hydraulic system of a novel automatic transmission (AT) was designed. The dimension and structure of valves and cylinders were designed by theoretical calculation. The dynamic simulation model of hydraulic system of AT was established by ITI-SimulationX. Simulation results and theoretical design results were compared to confirm the simulation model. Based on the confirmed simulation model, the simulation results of pressure and flow of the hydraulic system were analyzed. The dynamic simulation method is very helpful for designing and analyzing the performance of hydraulic system and further optimization design. The theoretical design method and dynamic simulation model are feasible for the real industrial applications. The research results can be used in hydraulic system design and optimization.
基金Project(51105017) supported by the National Natural Science Foundation of ChinaProject(2011BAG09B00) supported by the National Science and Technology Support Program of ChinaProject(2010DFB80020) supported by the Technology Major Project of the Ministry of Science and Technology of China
文摘For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.
基金Project(51405010)supported by the National Natural Science Foundation of ChinaProject(2011BAG09B00)supported by the National Science and Technology Support Program of China
文摘For the purpose of improving efficiency and realizing start–stop function, an electric oil pump(EOP) is integrated into an 8-speed automatic transmission(AT). A mathematical model is built to calculate the transmission power loss and the hydraulic system leakage. Based on this model, a flow-based control strategy is developed for EOP to satisfy the system flow requirement. This control strategy is verified through the forward driving simulation. The results indicate that there is a best combination for the size of mechanical oil pump(MOP) and EOP in terms of minimum energy consumption. In order to get a quick and smooth starting process, control strategies of the EOP and the on-coming clutch are proposed. The test environment on a prototype vehicle is built to verify the feasibility of the integrated EOP and its control strategies. The results show that the selected EOP can satisfy the flow requirement and a quick and smooth starting performance is achieved in the start–stop function. This research has a high value for the forward design of EOP in automatic transmissions with respect to efficiency improvement and start–stop function.
文摘In the present study,hydraulic and thermal behavior of an automatic transmission nano-fluid(ATNF) inside a tube with a twisted tape has been investigated.The heat transfer improvement and pressure drop of transmission oil for each of case of using twisted tape and nano-particles were also examined separately and compared with each other.The Cu O nano-particles were used to prepare the ATNF.The effects of different Reynolds numbers and different mass fractions of nano-particle were investigated.The results showed that applying nano-particles and twisted tape simultaneously increases both the pressure drop and Nusselt number,on average by about 53% and 76%,respectively.By using a parameter,namely thermal performance index η,the effect of increasing heat transfer and pressure drop was studied simultaneously.The heat transfer improvement predominates the pressure drop increment in all cases.It was observed that the highest thermal performance of 1.9 was obtained at Re=634 and Φ=2%.Furthermore,regarding the increment of the Nu number,it was shown that the use of twisted tapes individually could increase the average Nu number by 41%,while the max increment arising from individual use of 2% nano-particles is 13%,so using twisted tape is a more effective-technique for this case study.
基金Project(2011BAG09B00)supported by the National Science and Technology Support Program,China
文摘In order to realize the computer aided design of AT shifting element schemes, a mathematical model of shifting element schemes which can be easily identified by computers was built. Taking the transmission ratio sequence as an optimization objective and simple shifting logic between adjacent gears through operating only one shifting element as a constraint condition, a fitness function of shifting element schemes was proposed. ZF-8AT shifting element schemes were optimized based on GA work-box of MATLAB, and the feasibility of the optimization algorithm was verified.
