In order to obtain liquefied products with higher yields of aromatic molecules to produce mesophase pitch,a good understanding of the relevant reaction mechanisms is required.Reactive molecular dynamics simulations we...In order to obtain liquefied products with higher yields of aromatic molecules to produce mesophase pitch,a good understanding of the relevant reaction mechanisms is required.Reactive molecular dynamics simulations were used to study the thermal reactions of pyrene,1-methylpyrene,7,8,9,10-tetrahydrobenzopyrene,and mixtures of pyrene with 1-octene,cyclohexene,or styrene.The reactant conversion rates,reaction rates,and product distributions were calculated and compared,and the mechanisms were analyzed and discussed.The results demonstrated that methyl and naphthenic structures in aromatics might improve the conversion rates of reactants in hydrogen transfer processes,but their steric hindrances prohibited the generation of high polymers.The naphthenic structures could generate more free radicals and presented a more obvious inhibition effect on the condensation of polymers compared with the methyl side chains.It was discovered that when different olefins were mixed with pyrene,1-octene primarily underwent pyrolysis reactions,whereas cyclohexene mainly underwent hydrogen transfer reactions with pyrene and styrene,mostly producing superconjugated biradicals through condensation reactions with pyrene.In the mixture systems,the olefins scattered aromatic molecules,hindering the formation of pyrene trimers and higher polymers.According to the reactive molecular dynamics simulations,styrene may enhance the yield of dimer and enable the controlled polycondensation of pyrene.展开更多
Steam pretreatment is a widely used method for modifying the acidity and structure of zeolites,thereby enhancing their catalytic properties.This study systematically investigated the effects of steam treatment on ZSM-...Steam pretreatment is a widely used method for modifying the acidity and structure of zeolites,thereby enhancing their catalytic properties.This study systematically investigated the effects of steam treatment on ZSM-5 zeolites at varying treatment temperatures and durations.The structural evolution of the catalysts was monitored using N2 adsorptiondesorption,X-ray diffraction,inductively coupled plasma optical emission spectroscopy,scanning electron microscopy,NH3 temperature-programmed desorption,in situ pyridine infrared spectroscopy,and thermogravimetric analysis.The characterization results revealed that mesopores were introduced into the ZSM-5 zeolite catalysts through dealumination induced using steam treatment at moderate temperatures(400 and 500℃).Moreover,compared with the parent catalyst,the steam-treated catalysts exhibited a lower amount of acid sites and relative crystallinity,while the n(Si)/n(Al)ratio increased.In the co-conversion of methanol and n-hexane in a fixed bed reactor at 400℃and 0.5 MPa(N2 atmosphere),with a weight hourly space velocity of 1 h−1 and a stoichiometric ratio of 1:1(CH3OH to n-hexane),the steam-treated catalysts displayed a prolonged catalyst lifetime.Particularly,the parent zeolite had a lifetime of 96 h,while the catalyst treated at 500℃for 12 h had a lifetime of up to 240 h.Additionally,the steam-treated catalysts maintained stable n-hexane conversion and improved aromatic selectivity.Notably,these treated catalysts exhibited a lower deactivation rate than the parent catalyst,and would be conducive to industrial scale-up production.展开更多
Alkane coupling with CO_(2) by metal-containing zeolites catalysis is found to be a promising way to produce aromatics and syngas in recent years,but the real active sites and the role of CO_(2) are still unclear owin...Alkane coupling with CO_(2) by metal-containing zeolites catalysis is found to be a promising way to produce aromatics and syngas in recent years,but the real active sites and the role of CO_(2) are still unclear owing to the quick evolution of the metallic active sites and the complex reaction processes including direct propane aromatization,CO_(2) hydrogenation,reverse water-gas shift reaction,and propane-CO_(2) coupling aromatization.Herein,Ga/ZSM-5 catalysts were constructed to study the dynamic evolution of the metallic active sites and the role of CO_(2) during the propane and CO_(2) coupling reaction.After optimizing the reaction conditions,a notable propane conversion rate of 97.9%and an impressive aromatics selectivity of 80.6%in hydrocarbons can be achieved at the conditions of 550℃and CO_(2)/C_(3)H_(8) of 4.^(13)CO_(2)isotope experiments illustrate that C-atoms of CO_(2) can enter into CO(86.5%)and aromatics(10.8%)during the propane-CO_(2) coupling reaction process.In situ XANES and FTIR spectroscopies at 550℃and H_(2)/C_(3)H_(8) atmosphere reveal that GaO_(x) species can be gradually dispersed into[GaH_(2)]^(+)/[GaH]^(2+)on the Bronsted acid sites of ZSM-5 zeolite during H_(2) and/or C_(3)H_(8) treatment,which are the real active sites for propane-CO_(2) coupling conversion.In situ CO_(2)-FTIR experiments demonstrate that the[GaH_(2)]^(+)/[GaH]^(2+)species can react with CO_(2) and accelerate the propane and CO_(2) coupling process.This work not only presents a cost-effective avenue for CO_(2) utilization,but also contributes to the active site design for improved alkane and CO_(2) activation in coupling reaction system.展开更多
The comprehensive characterization of heavy aromatic hydrocarbons in gasoline is important to optimize the blending process and understand the correlation between aromatics content and engine particulate emissions.How...The comprehensive characterization of heavy aromatic hydrocarbons in gasoline is important to optimize the blending process and understand the correlation between aromatics content and engine particulate emissions.However,most current analysis methods can only provide the composition of C_(8)/C_(8-) aromatics.In this study,a simple and fast gas chromatography-mass spectrometry(GC-MS)method to identify and quantify C_(9+)aromatics in gasoline was developed.A selected ion monitoring model was employed to eliminate interference from non-aromatic compounds in the detection of target compounds,as well as that between target compounds with different molecular formulas.The identification of C_(9+)aromatics was based on the retention time of model compounds,combined with characteristic mass fragment ions,boiling points,and retention indexes.Seventy-nine C_(9)–C_(12)aromatic compounds were quantified based on the calibration of representative model compounds,and the method demonstrated good linearity,and high accuracy and precision.Furthermore,the developed methodology was successfully applied to the analysis of gasoline fractions from the reforming,pyrolysis,straight-run,delayed coking,and catalytic cracking processes,as well as commercial gasolines.The results showed that C_(9)aromatics were the predominant aromatics in all gasoline samples,followed by C10 aromatics.Alkylbenzenes such as C_(9)H_(12)and C_(10)H_(14)were the main components in the reforming,straight-run,delayed coking,and catalytic cracking gasoline fractions,as well as in the commercial gasolines,in which 1,2,4-trimethylbenzene and 3-ethyltoluene were dominant;in contrast,aromatics with higher degrees of unsaturation such as indene were the most abundant aromatics in the pyrolysis gasoline fraction.展开更多
Metal-modified H-ZSM-5 has a high selectivity of aromatics in methanol to aromatics(MTA)reaction,which is often attributed to the metal promoting the aromatization of intermediate olefins.However,the effect of methano...Metal-modified H-ZSM-5 has a high selectivity of aromatics in methanol to aromatics(MTA)reaction,which is often attributed to the metal promoting the aromatization of intermediate olefins.However,the effect of methanol dehydrogenation on aromatics formation over these catalysts is rarely studied.Here,we report that HCHO,which is formed by methanol dehydrogenation over Zn/H-ZSM-5 prepared by Zn impregnation,can participate in the synthesis of aromatics.Methanol conversion can produce more aromatics than olefins(propylene or ethylene)conversion over Zn/H-ZSM-5,indicating the conventional MTA pathway including methanol-to-olefins and olefins-to-aromatics is not complete.Moreover,an MTA mechanism including the conventional pathway and the methanol and HCHO coupling pathway is systematically proposed.展开更多
The need for cleaner fuels has resulted in a continuing worldwide trend to reduce diesel sulfur and aromatics. There are many approaches to reducing sulfur and aromatics in diesel. Most of them have a common drawback ...The need for cleaner fuels has resulted in a continuing worldwide trend to reduce diesel sulfur and aromatics. There are many approaches to reducing sulfur and aromatics in diesel. Most of them have a common drawback of high cost because of adopting two stages of hydrotreating and using noble-metal catalyst, especially for reducing aromatics. The attempt to resolve this issue has led to the recent development of the Single Stage Hydrotreating (SSHT) process by Research Institute of Petroleum Processing (RIPP), SINOPEC.The SSHT process is a single-stage hydrotreating technology for producing low sulfur and low aromatics diesel. The process uses one or two non-noble-metal catalysts system and operates at moderate pressure. When revamping an existing unit to meet low aromatics diesel specification, the only thing to do is to add a reactor or replace the existing reactor, In pilot plant tests, the SSHT technology has successfully treated SRGO (Straight Run Gas Oil), LCO (Light Cycle Oil) or the blend of them. It is shown that by using the SSHT process diesel with sulfur of 30 ppm and aromatics of 15 m% can be produced from Middle-East SRGO and diesel with aromatics content of 25 m% can be produced from cracked feed, such as FCC-LCO. High diesel yield and cetane number gain (from cracked feed stocks) give the SSHT technology a performance advantage compared to conventional hydrocracking and hydrotreating processes.The lower investment and operating cost is another advantage. The first commercial application of the SSHT technology has been in operation since September 2001.展开更多
Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a comp...Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a composite catalyst consisting of Fe/ZnCr_(2)O_(4)(Fe modified ZnCr_(2)O_(4)spinel)oxide and H-ZSM-5 zeolite.Impregnation of only 3 wt%of Fe onto ZnCr_(2)O_(4)can remarkably increase CO conversion without sacrificing the aromatics selectivity.Oxygen vacancy concentration is improved after impregnating Fe.The highly dispersed iron carbide species is formed during the reaction over Fe/ZnCr_(2)O_(4)spinel oxide.The synergistic effect of oxygen vacancy and iron carbide results in a rapid formation of abundant oxygenated intermediate species,which can be continuously transformed to aromatics in H-ZSM-5.This study provides a new insight into the design of highly efficient catalyst for syngas conversion.展开更多
A facile approach was developed for the preparation of nano-sized HZSM-5 with a hierarchical mesoporous structure by adding imidazole into conventional zeolite synthesis precursor solution. The physicochemical propert...A facile approach was developed for the preparation of nano-sized HZSM-5 with a hierarchical mesoporous structure by adding imidazole into conventional zeolite synthesis precursor solution. The physicochemical properties of modified HZSM-5 were characterized by X-ray diffraction（XRD）, N;adsorption–desorption isotherms, scanning electron microscopy（SEM）, NH;-temperature-programmed desorption（NH;-TPD） and pyridine adsorption infrared spectroscopy（Py-IR）. The coke in spent catalysts was characterized by thermogravimetry（TG）. The results showed that hierarchical HZSM-5 zeolites with excellent textural properties, such as abundant porous structure, uniform particle size and suitable acidity, could be synthesized by the recipe of one-pot synthesis routes. Moreover, the obtained HZSM-5 exhibited higher selectivity of total aromatics as well as longer lifetime in the catalytic conversion of methanol to aromatics, comparing with conventional HZSM-5. It is expected that the synthesis approach demonstrated here will be applicable to other zeolites with particular textural properties and controllable particle sizes, facilitating the emergence of new-type porous materials and their related applications in catalysis and separation.展开更多
The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technolo...The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technological route at the plant.The comparison reveals differences in every aspect of feed consumption,unit capacity,product output,product distribution,and unit process parameters depending upon which catalyst type is adopted by the integrated PX complex.The type of aromatics isomerization catalyst has its influence on the plant scale,the construction cost,the process unit capacity and the product cost,with the magnitude of its impact varying with changing feed conditions.展开更多
Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeol...Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeolite is developed.1 to 4 nm sized Fe_(3)O_(4) nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe_(3)O_(4) restructuring during co-hydro thermal synthesis using organosilane modification.A very high aromatic productivity of 214 mmolaromatics h^(-1) gFe^(-1) can be obtained with a remarkable 62%aromatic selectivity in hydrocarbons.This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h.The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform,well-dispersed oxide nanoparticles in close intimacy with-and partially confined in-a zeolite matrix.展开更多
This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were ...This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.展开更多
Conversion of LCO(light cycle oil)to BTX(benzene,toluene,and xylene)is an economically valuable method for refineries.However,this approach still faces difficulties as the main reactions are not clearly understood.Her...Conversion of LCO(light cycle oil)to BTX(benzene,toluene,and xylene)is an economically valuable method for refineries.However,this approach still faces difficulties as the main reactions are not clearly understood.Here we study the detailed hydrocracking pathway of typical reactants,1-methylnaphthalene and tetralin,through molecular simulations and experiments to improve our understanding of the conversion process of LCO to BTX.Molecular simulations demonstrate that the rate-determining step is the isomerization pathway of six-membered ring to five-membered ring in tetralin as its activation energy(ΔEa)is the highest among all the reactions and the order ofΔEa of reactions is isomerization>ring-opening≈side-chain cleavage.The results of experiments show that with the increase in reaction depth,i.e.,through a high temperature(350-370℃)and low LHSV(4.5-6.0 h^(−1)),isomerization,ring-opening,and side-chain cleavage reactions occurred,thus improving the selectivity and yield of alkyl aromatics.展开更多
Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite cata...Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite catalysts is still ambiguous.Herein,we investigate the size effect by selecting ZnCr_(2)O_(4)spinel,as a probe oxide,mixing with H-ZSM-5 zeolite as a composite catalyst for STA reaction.The CO conversion,aromatics selectivity and space-time yield(STY)of aromatics are all significantly improved with the crystal size of ZnCr_(2)O_(4)oxide decreases,which can mainly attribute to the higher oxygen vacancy concentration and thus the rapid generation of more C1oxygenated intermediate species.Based on the understanding of the size-performance relationship,ZnCr_(2)O_(4)-400 with a smaller size mixing with H-ZSM-5 can achieve32.6%CO conversion with 76%aromatics selectivity.The STY of aromatics reaches as high as 4.79 mmol g_(cat)^(-1)h^(-1),which outperforms the previously reported some typical catalysts.This study elucidates the importance of regulating the size of oxide to design more efficient oxidezeolite composite catalysts for conversion of syngas to value-added chemicals.展开更多
Several studies have proven a strong correlation between global warming and CO_(2)emissions.Annually,38 billion tons of CO_(2)are approximately emitted into the atmosphere.Utilizing CO_(2)via chemical conversion to cl...Several studies have proven a strong correlation between global warming and CO_(2)emissions.Annually,38 billion tons of CO_(2)are approximately emitted into the atmosphere.Utilizing CO_(2)via chemical conversion to clean fuels and value-added aromatics can substantially contribute to controlling the problem.Considering the thermodynamic and environmental limitations of hydrogenation of CO_(2)alone to value-added aromatics and fuels,CO_(2)utilization has currently emerged as a promising and practical approach for the production of fuels and aromatics with simultaneous utilization of both CO and CO_(2)wastes.As such,the approach is economically preferable.CO_(2)could be converted directly to fuels by the hydrogenation process or as a part of a syngas mixture.Dimethyl ether(DME)is a clean fuel with a higher energy density,which could be used as a substituent for several fuels such as diesel.In the same vein,value-added aromatics such as benzene,toluene,and xylene(BTX)can be produced from a similar process.Herein,we report a review that collects the most recent studies for the conversion of CO_(2)to DME and aromatics via zeolite-based bifunctional catalysts.We highlighted the main routes for producing DME and aromatics,as well as thoroughly discussed the conducted studies on CO_(2)hydrogenation and CO_(2)-rich syngas utilized as feedstock for conversion to DME and aromatics.The CO_(2)hydrogenation mostly occurs through the methanol-mediated reaction route but is most often limited by low selectivity and catalyst deactivation,particularly in the utilization of CO_(2)alone for the reduction reaction.The review takes an overview of the progress made so far and concluded by identifying the roles and challenges of zeolite-based catalysts for CO_(2)utilization and conversion to DME and aromatics.Accordingly,despite the incredible growth the field received in the last couple of years,however,many research challenges and opportunities associated with this process are still abounded and required to be addressed.Special attention is required for the development of approaches to block diffusion of H2O through zeolite to suppress the excess formation of CO_(2)in CO_(2)-rich syngas hydrogenation to DME and aromatics,exceed the product distribution limits,and suppress catalysts deactivation.展开更多
Catalyst containing shape selective zeolite is used to investigate the catalytic cracking characteristics of palm oil and three types of hydrocarbon VGOs on a fixed fluidized bed(FFB) unit. The advantage of producing ...Catalyst containing shape selective zeolite is used to investigate the catalytic cracking characteristics of palm oil and three types of hydrocarbon VGOs on a fixed fluidized bed(FFB) unit. The advantage of producing light olefins and light aromatics by catalytic cracking of plant oil is discussed. Results indicate that the hydrocarbyl group of the plant oil molecule is quite readily crackable; the C_6—C_8 aromatics yield is well above and the light olefins yield is about the same with the hydrocarbon feeds, while the yields of low value products are lower; the hydrocarbyl group of the plant oil molecule has strong tendency of aromatization, and can enter the zeolite pores to selectively form C_6—C_8 aromatics; during catalytic cracking of plant oil and fatty acids, a portion of the oxygen is removed in the form of water through hydrogen transfer reaction, while olefins are prevented from being saturated, which can ensure proper yields of both low-carbon olefins and light aromatics.展开更多
A promising sulfated zirconia(SZ) was successfully synthesized to remove olefins from aromatics. The effects of type and quantity of precipitant, the concentration of impregnants and the calcination temperature were s...A promising sulfated zirconia(SZ) was successfully synthesized to remove olefins from aromatics. The effects of type and quantity of precipitant, the concentration of impregnants and the calcination temperature were studied, and the synthesized samples were characterized by XRD, SEM, TG-DTG, FTIR, N_2 adsorption analysis and the FTIR pyridine adsorption(py-IR) techniques. This catalyst was found to be superiorly active as compared with the commercial ROC, which exhibited promising application prospects in industry. The optimum synthesis variables required that SZ was impregnated with 2.0 mol/L sulfuric acid and calcined at 650 ℃, and the precursor was precipitated by ammonium hydroxide to reach eventually a p H value of over 9.46. The addition of SO_4^(2-) species increased the amount of catalytically active t-ZrO_2, which was helpful to an increasing abundance of acid sites for enhancing the activity. Meanwhile, the calcination temperature had a great effect on the structure, composition and properties of sulfated zirconia.展开更多
1-Butyl-3-methylimidazolium bromochloroaluminate （[bmim]Br-AlCl3） ionic liquid was used as an acid catalyst for removal of trace olefins from the aromatic hydrocarbons. The influence of various reaction parameters s...1-Butyl-3-methylimidazolium bromochloroaluminate （[bmim]Br-AlCl3） ionic liquid was used as an acid catalyst for removal of trace olefins from the aromatic hydrocarbons. The influence of various reaction parameters such as reaction time, temperature, dosage and acid strength of catalyst was investigated. The experimental results demonstrated that the ionic liquid exhibited excellent activity under mild reaction conditions, with the conversion of olefins reaching 98.84% and the bromine index of the aromatics varying from 1129 to 13. On the basis of the results obtained, thereof, a possible reaction mechanism was proposed.展开更多
The PRO/Ⅱ process simulation software was applied to carry out simulated calculation of the aromatics fractionation unit and the heat integrated rectification process was proposed for the aromatics fractionation sect...The PRO/Ⅱ process simulation software was applied to carry out simulated calculation of the aromatics fractionation unit and the heat integrated rectification process was proposed for the aromatics fractionation section of the 1.0 Mt/a toluene disproportionation unit at the Zhenhai Refining and Chemical Company. The optimized operating parameters were obtained through the energy utilization analysis,process simulation,heat exchanger calculations and comparisons of utility consumption. The operation of commercialized unit has revealed that the design parameters of each rectification column were consistent with the operation results,and the utility consumption was about 47% lower than the traditional heat integrated process.展开更多
A novel additive incorporated into the catalyst for removing trace olefins from aromatics was proposed, and under the laboratory conditions the lifetime of the catalyst was increased from 5 h to 8 h upon specifying th...A novel additive incorporated into the catalyst for removing trace olefins from aromatics was proposed, and under the laboratory conditions the lifetime of the catalyst was increased from 5 h to 8 h upon specifying the conversion of the olefins equating to more than 55% as a criterion. Catalyst production, which was named ROC, has been successfully scaled up from laboratory formulations to commercial scale manufacture and over 100 tons of catalyst had been produced. The superiority in catalytic activity was identified by the evaluation tests of the ROC catalyst based on whatever kind of feedstocks (with their bromine index ranging from 400 mgBr/100g to 1 200 mgBr/100g) being used as the feedstock. The X-ray diffraction patterns had verified that the additive was highly dispersed on the surface of catalyst; the GC-FID analysis results showed that the ROC catalyst could increase the xylene content; the pyridine-FTIR spectroscopic analyses suggested that the additive could increase the amount of the weak L acids, which was the main cause leading to enhancement of the catalyst activity.展开更多
Reactor models were developed to describe the isomerization reaction process of C_(8) aromatics by applying a six-component sequential reaction network.Lab-scale experimental data were used in an axial bed reactor mod...Reactor models were developed to describe the isomerization reaction process of C_(8) aromatics by applying a six-component sequential reaction network.Lab-scale experimental data were used in an axial bed reactor model,and dynamic parameters were fitted by simulated annealing algorithm.In addition,industrial data and calculated dynamic parameters were used to determine the six-component concentration distributions using a radial reactor model.The influence of back-mixing on reaction performance was investigated.It was found that the model considering back-mixing was much closer to the real industrial reaction process.展开更多
基金financially supported by the National Natural Science Foundation of China(Approval No.42172168).
文摘In order to obtain liquefied products with higher yields of aromatic molecules to produce mesophase pitch,a good understanding of the relevant reaction mechanisms is required.Reactive molecular dynamics simulations were used to study the thermal reactions of pyrene,1-methylpyrene,7,8,9,10-tetrahydrobenzopyrene,and mixtures of pyrene with 1-octene,cyclohexene,or styrene.The reactant conversion rates,reaction rates,and product distributions were calculated and compared,and the mechanisms were analyzed and discussed.The results demonstrated that methyl and naphthenic structures in aromatics might improve the conversion rates of reactants in hydrogen transfer processes,but their steric hindrances prohibited the generation of high polymers.The naphthenic structures could generate more free radicals and presented a more obvious inhibition effect on the condensation of polymers compared with the methyl side chains.It was discovered that when different olefins were mixed with pyrene,1-octene primarily underwent pyrolysis reactions,whereas cyclohexene mainly underwent hydrogen transfer reactions with pyrene and styrene,mostly producing superconjugated biradicals through condensation reactions with pyrene.In the mixture systems,the olefins scattered aromatic molecules,hindering the formation of pyrene trimers and higher polymers.According to the reactive molecular dynamics simulations,styrene may enhance the yield of dimer and enable the controlled polycondensation of pyrene.
基金We gratefully acknowledge financial support from the National Nature Science Foundation of China(2177606)PetroChina(Development of methanol coupled light hydrocarbon aromatization catalyst and process technology,2016A-24308).
文摘Steam pretreatment is a widely used method for modifying the acidity and structure of zeolites,thereby enhancing their catalytic properties.This study systematically investigated the effects of steam treatment on ZSM-5 zeolites at varying treatment temperatures and durations.The structural evolution of the catalysts was monitored using N2 adsorptiondesorption,X-ray diffraction,inductively coupled plasma optical emission spectroscopy,scanning electron microscopy,NH3 temperature-programmed desorption,in situ pyridine infrared spectroscopy,and thermogravimetric analysis.The characterization results revealed that mesopores were introduced into the ZSM-5 zeolite catalysts through dealumination induced using steam treatment at moderate temperatures(400 and 500℃).Moreover,compared with the parent catalyst,the steam-treated catalysts exhibited a lower amount of acid sites and relative crystallinity,while the n(Si)/n(Al)ratio increased.In the co-conversion of methanol and n-hexane in a fixed bed reactor at 400℃and 0.5 MPa(N2 atmosphere),with a weight hourly space velocity of 1 h−1 and a stoichiometric ratio of 1:1(CH3OH to n-hexane),the steam-treated catalysts displayed a prolonged catalyst lifetime.Particularly,the parent zeolite had a lifetime of 96 h,while the catalyst treated at 500℃for 12 h had a lifetime of up to 240 h.Additionally,the steam-treated catalysts maintained stable n-hexane conversion and improved aromatic selectivity.Notably,these treated catalysts exhibited a lower deactivation rate than the parent catalyst,and would be conducive to industrial scale-up production.
基金supported by the National Key Research and Development Program of China (No.2022YFE0116000)the National Natural Science Foundation of China (No.22288101,21991092,21991090,22202193,and 22172166)+1 种基金the Youth Innovation Promotion Association CAS (2021182)the Innovation Research Foundation of Dalian Institute of Chemical Physics,Chinese Academy of Sciences (DICP I202429 and I202217)。
文摘Alkane coupling with CO_(2) by metal-containing zeolites catalysis is found to be a promising way to produce aromatics and syngas in recent years,but the real active sites and the role of CO_(2) are still unclear owing to the quick evolution of the metallic active sites and the complex reaction processes including direct propane aromatization,CO_(2) hydrogenation,reverse water-gas shift reaction,and propane-CO_(2) coupling aromatization.Herein,Ga/ZSM-5 catalysts were constructed to study the dynamic evolution of the metallic active sites and the role of CO_(2) during the propane and CO_(2) coupling reaction.After optimizing the reaction conditions,a notable propane conversion rate of 97.9%and an impressive aromatics selectivity of 80.6%in hydrocarbons can be achieved at the conditions of 550℃and CO_(2)/C_(3)H_(8) of 4.^(13)CO_(2)isotope experiments illustrate that C-atoms of CO_(2) can enter into CO(86.5%)and aromatics(10.8%)during the propane-CO_(2) coupling reaction process.In situ XANES and FTIR spectroscopies at 550℃and H_(2)/C_(3)H_(8) atmosphere reveal that GaO_(x) species can be gradually dispersed into[GaH_(2)]^(+)/[GaH]^(2+)on the Bronsted acid sites of ZSM-5 zeolite during H_(2) and/or C_(3)H_(8) treatment,which are the real active sites for propane-CO_(2) coupling conversion.In situ CO_(2)-FTIR experiments demonstrate that the[GaH_(2)]^(+)/[GaH]^(2+)species can react with CO_(2) and accelerate the propane and CO_(2) coupling process.This work not only presents a cost-effective avenue for CO_(2) utilization,but also contributes to the active site design for improved alkane and CO_(2) activation in coupling reaction system.
基金This work was supported by the research project of Sinopec Research Institute of Petroleum Processing Co.,Ltd.(G720007).
文摘The comprehensive characterization of heavy aromatic hydrocarbons in gasoline is important to optimize the blending process and understand the correlation between aromatics content and engine particulate emissions.However,most current analysis methods can only provide the composition of C_(8)/C_(8-) aromatics.In this study,a simple and fast gas chromatography-mass spectrometry(GC-MS)method to identify and quantify C_(9+)aromatics in gasoline was developed.A selected ion monitoring model was employed to eliminate interference from non-aromatic compounds in the detection of target compounds,as well as that between target compounds with different molecular formulas.The identification of C_(9+)aromatics was based on the retention time of model compounds,combined with characteristic mass fragment ions,boiling points,and retention indexes.Seventy-nine C_(9)–C_(12)aromatic compounds were quantified based on the calibration of representative model compounds,and the method demonstrated good linearity,and high accuracy and precision.Furthermore,the developed methodology was successfully applied to the analysis of gasoline fractions from the reforming,pyrolysis,straight-run,delayed coking,and catalytic cracking processes,as well as commercial gasolines.The results showed that C_(9)aromatics were the predominant aromatics in all gasoline samples,followed by C10 aromatics.Alkylbenzenes such as C_(9)H_(12)and C_(10)H_(14)were the main components in the reforming,straight-run,delayed coking,and catalytic cracking gasoline fractions,as well as in the commercial gasolines,in which 1,2,4-trimethylbenzene and 3-ethyltoluene were dominant;in contrast,aromatics with higher degrees of unsaturation such as indene were the most abundant aromatics in the pyrolysis gasoline fraction.
基金the financial support from the National Natural Science Foundation of China(Grant No.21978285,21991093,21991090)the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21030100)。
文摘Metal-modified H-ZSM-5 has a high selectivity of aromatics in methanol to aromatics(MTA)reaction,which is often attributed to the metal promoting the aromatization of intermediate olefins.However,the effect of methanol dehydrogenation on aromatics formation over these catalysts is rarely studied.Here,we report that HCHO,which is formed by methanol dehydrogenation over Zn/H-ZSM-5 prepared by Zn impregnation,can participate in the synthesis of aromatics.Methanol conversion can produce more aromatics than olefins(propylene or ethylene)conversion over Zn/H-ZSM-5,indicating the conventional MTA pathway including methanol-to-olefins and olefins-to-aromatics is not complete.Moreover,an MTA mechanism including the conventional pathway and the methanol and HCHO coupling pathway is systematically proposed.
文摘The need for cleaner fuels has resulted in a continuing worldwide trend to reduce diesel sulfur and aromatics. There are many approaches to reducing sulfur and aromatics in diesel. Most of them have a common drawback of high cost because of adopting two stages of hydrotreating and using noble-metal catalyst, especially for reducing aromatics. The attempt to resolve this issue has led to the recent development of the Single Stage Hydrotreating (SSHT) process by Research Institute of Petroleum Processing (RIPP), SINOPEC.The SSHT process is a single-stage hydrotreating technology for producing low sulfur and low aromatics diesel. The process uses one or two non-noble-metal catalysts system and operates at moderate pressure. When revamping an existing unit to meet low aromatics diesel specification, the only thing to do is to add a reactor or replace the existing reactor, In pilot plant tests, the SSHT technology has successfully treated SRGO (Straight Run Gas Oil), LCO (Light Cycle Oil) or the blend of them. It is shown that by using the SSHT process diesel with sulfur of 30 ppm and aromatics of 15 m% can be produced from Middle-East SRGO and diesel with aromatics content of 25 m% can be produced from cracked feed, such as FCC-LCO. High diesel yield and cetane number gain (from cracked feed stocks) give the SSHT technology a performance advantage compared to conventional hydrocracking and hydrotreating processes.The lower investment and operating cost is another advantage. The first commercial application of the SSHT technology has been in operation since September 2001.
基金the financial support from the National Natural Science Foundation of China(Grant No.21978285,21991093,21991090),the‘‘Transformational Technologies for Clean Energy and Demonstration”the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21030100)。
文摘Realizing high CO conversion and high aromatics selectivity simultaneously in syngas-to-aromatics(STA)reaction is still challenging.Herein,we report a 57.5%CO conversion along with 74%aromatics selectivity over a composite catalyst consisting of Fe/ZnCr_(2)O_(4)(Fe modified ZnCr_(2)O_(4)spinel)oxide and H-ZSM-5 zeolite.Impregnation of only 3 wt%of Fe onto ZnCr_(2)O_(4)can remarkably increase CO conversion without sacrificing the aromatics selectivity.Oxygen vacancy concentration is improved after impregnating Fe.The highly dispersed iron carbide species is formed during the reaction over Fe/ZnCr_(2)O_(4)spinel oxide.The synergistic effect of oxygen vacancy and iron carbide results in a rapid formation of abundant oxygenated intermediate species,which can be continuously transformed to aromatics in H-ZSM-5.This study provides a new insight into the design of highly efficient catalyst for syngas conversion.
基金the financial support of National Natural Science Foundation of China(NO.21536009)the National High Technology Research and Development Program of China(Grant No.2011AA05A2021)Science and Technology Innovation Planning Project of Shaanxi Province,China(NO.2012KTDZ0101-04)
文摘A facile approach was developed for the preparation of nano-sized HZSM-5 with a hierarchical mesoporous structure by adding imidazole into conventional zeolite synthesis precursor solution. The physicochemical properties of modified HZSM-5 were characterized by X-ray diffraction（XRD）, N;adsorption–desorption isotherms, scanning electron microscopy（SEM）, NH;-temperature-programmed desorption（NH;-TPD） and pyridine adsorption infrared spectroscopy（Py-IR）. The coke in spent catalysts was characterized by thermogravimetry（TG）. The results showed that hierarchical HZSM-5 zeolites with excellent textural properties, such as abundant porous structure, uniform particle size and suitable acidity, could be synthesized by the recipe of one-pot synthesis routes. Moreover, the obtained HZSM-5 exhibited higher selectivity of total aromatics as well as longer lifetime in the catalytic conversion of methanol to aromatics, comparing with conventional HZSM-5. It is expected that the synthesis approach demonstrated here will be applicable to other zeolites with particular textural properties and controllable particle sizes, facilitating the emergence of new-type porous materials and their related applications in catalysis and separation.
文摘The results of commercial application of two types of C_8 aromatics isomerization catalysts under different feed conditions were compared to gain an insight in the techno-economical basis for selecting proper technological route at the plant.The comparison reveals differences in every aspect of feed consumption,unit capacity,product output,product distribution,and unit process parameters depending upon which catalyst type is adopted by the integrated PX complex.The type of aromatics isomerization catalyst has its influence on the plant scale,the construction cost,the process unit capacity and the product cost,with the magnitude of its impact varying with changing feed conditions.
基金supported financially by the National Natural Science Foundation of China(51776206)the Local Innovative and Research Teams Project of Guangdong Pearl River Talents Program(2017BT01N092)+4 种基金the National Key R&D Program of China(2018YFB1501504)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX20_0095)the Fundamental Research Funds for the Central Universities(3203002104D)the Research Foundation-Flanders(FWO,grant 12E8617N)for funding and KU Leuven grant C14/20/086visiting scholar(2017-20202)at the Guangzhou Institute of Energy Conversion,Chinese Academy of Sciences。
文摘Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeolite is developed.1 to 4 nm sized Fe_(3)O_(4) nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe_(3)O_(4) restructuring during co-hydro thermal synthesis using organosilane modification.A very high aromatic productivity of 214 mmolaromatics h^(-1) gFe^(-1) can be obtained with a remarkable 62%aromatic selectivity in hydrocarbons.This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h.The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform,well-dispersed oxide nanoparticles in close intimacy with-and partially confined in-a zeolite matrix.
基金National Key Research and Development Program of China(2017YFB0306605)Key Laboratory of Engines at Tianjin University(Grant No.K2022-06).
文摘This study aims to analyze the influence of the polycyclic aromatic hydrocarbon(PAH)content in diesel on the physical and chemical properties of diesel soot particles.Four diesel fuels with different PAH content were tested on a 11.6 L direct-injection diesel engine.The raw particulate matter(PM)before the after-treatment devices was collected using the thermophoresis sampling system and the filter sampling system.A transmission electron microscope and Raman spectrometer are used to analyze the physical properties of the soot particles,including morphology,primary particle size distribution,and graphitization degree.A Fourier transform infrared spectrometer and thermogravimetric analyzer are used to characterize the surface chemical composition and oxidation reactivity of soot particles,respectively.The results show that as the PAH content in the fuel decreases,the size of the primary soot particles decreases from 29.58 to 26.70 nm.The graphitization degree of soot particles first increases and then decreases,and the relative content of the aliphatic hydrocarbon functional groups of soot particles first decreases and then increases.The T_(10),T_(50),and T_(90) of soot from high-PAH fuel are 505.3,589.3,and 623.5℃,while those from low-PAH fuel are 480.1,557.5,and 599.2℃,respectively.This indicates that exhaust PM generated by the low-PAH fuel has poor oxidation reactivity.However,as the PAH content in fuel is further decreased,the excessively high cetane number may cause uneven mixing and incomplete combustion,leading to enhanced oxidation reactivity.
基金This work was financially supported by the SINOPEC Science and technology Development Funds(No.12005-1)the Hydrogenation Process and Hydrogenation Catalyst Laboratory(RIPP,SINOPEC).
文摘Conversion of LCO(light cycle oil)to BTX(benzene,toluene,and xylene)is an economically valuable method for refineries.However,this approach still faces difficulties as the main reactions are not clearly understood.Here we study the detailed hydrocracking pathway of typical reactants,1-methylnaphthalene and tetralin,through molecular simulations and experiments to improve our understanding of the conversion process of LCO to BTX.Molecular simulations demonstrate that the rate-determining step is the isomerization pathway of six-membered ring to five-membered ring in tetralin as its activation energy(ΔEa)is the highest among all the reactions and the order ofΔEa of reactions is isomerization>ring-opening≈side-chain cleavage.The results of experiments show that with the increase in reaction depth,i.e.,through a high temperature(350-370℃)and low LHSV(4.5-6.0 h^(−1)),isomerization,ring-opening,and side-chain cleavage reactions occurred,thus improving the selectivity and yield of alkyl aromatics.
基金financial support from the National Natural Science Foundation of China(Grant No.21978285,21991093,21991090)the“Transformational Technologies for Clean Energy and Demonstration”,Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA21030100)。
文摘Direct conversion of syngas to aromatics(STA)over oxide-zeolite composite catalysts is promising as an alternative method for aromatics production.However,the structural effect of the oxide component in composite catalysts is still ambiguous.Herein,we investigate the size effect by selecting ZnCr_(2)O_(4)spinel,as a probe oxide,mixing with H-ZSM-5 zeolite as a composite catalyst for STA reaction.The CO conversion,aromatics selectivity and space-time yield(STY)of aromatics are all significantly improved with the crystal size of ZnCr_(2)O_(4)oxide decreases,which can mainly attribute to the higher oxygen vacancy concentration and thus the rapid generation of more C1oxygenated intermediate species.Based on the understanding of the size-performance relationship,ZnCr_(2)O_(4)-400 with a smaller size mixing with H-ZSM-5 can achieve32.6%CO conversion with 76%aromatics selectivity.The STY of aromatics reaches as high as 4.79 mmol g_(cat)^(-1)h^(-1),which outperforms the previously reported some typical catalysts.This study elucidates the importance of regulating the size of oxide to design more efficient oxidezeolite composite catalysts for conversion of syngas to value-added chemicals.
基金the support provided by the Interdisciplinary Research Center for Hydrogen and Energy Storage(IRC-HES)。
文摘Several studies have proven a strong correlation between global warming and CO_(2)emissions.Annually,38 billion tons of CO_(2)are approximately emitted into the atmosphere.Utilizing CO_(2)via chemical conversion to clean fuels and value-added aromatics can substantially contribute to controlling the problem.Considering the thermodynamic and environmental limitations of hydrogenation of CO_(2)alone to value-added aromatics and fuels,CO_(2)utilization has currently emerged as a promising and practical approach for the production of fuels and aromatics with simultaneous utilization of both CO and CO_(2)wastes.As such,the approach is economically preferable.CO_(2)could be converted directly to fuels by the hydrogenation process or as a part of a syngas mixture.Dimethyl ether(DME)is a clean fuel with a higher energy density,which could be used as a substituent for several fuels such as diesel.In the same vein,value-added aromatics such as benzene,toluene,and xylene(BTX)can be produced from a similar process.Herein,we report a review that collects the most recent studies for the conversion of CO_(2)to DME and aromatics via zeolite-based bifunctional catalysts.We highlighted the main routes for producing DME and aromatics,as well as thoroughly discussed the conducted studies on CO_(2)hydrogenation and CO_(2)-rich syngas utilized as feedstock for conversion to DME and aromatics.The CO_(2)hydrogenation mostly occurs through the methanol-mediated reaction route but is most often limited by low selectivity and catalyst deactivation,particularly in the utilization of CO_(2)alone for the reduction reaction.The review takes an overview of the progress made so far and concluded by identifying the roles and challenges of zeolite-based catalysts for CO_(2)utilization and conversion to DME and aromatics.Accordingly,despite the incredible growth the field received in the last couple of years,however,many research challenges and opportunities associated with this process are still abounded and required to be addressed.Special attention is required for the development of approaches to block diffusion of H2O through zeolite to suppress the excess formation of CO_(2)in CO_(2)-rich syngas hydrogenation to DME and aromatics,exceed the product distribution limits,and suppress catalysts deactivation.
基金financially supported by the SINOPEC Research and Development Project (Contact No. 115010)
文摘Catalyst containing shape selective zeolite is used to investigate the catalytic cracking characteristics of palm oil and three types of hydrocarbon VGOs on a fixed fluidized bed(FFB) unit. The advantage of producing light olefins and light aromatics by catalytic cracking of plant oil is discussed. Results indicate that the hydrocarbyl group of the plant oil molecule is quite readily crackable; the C_6—C_8 aromatics yield is well above and the light olefins yield is about the same with the hydrocarbon feeds, while the yields of low value products are lower; the hydrocarbyl group of the plant oil molecule has strong tendency of aromatization, and can enter the zeolite pores to selectively form C_6—C_8 aromatics; during catalytic cracking of plant oil and fatty acids, a portion of the oxygen is removed in the form of water through hydrogen transfer reaction, while olefins are prevented from being saturated, which can ensure proper yields of both low-carbon olefins and light aromatics.
文摘A promising sulfated zirconia(SZ) was successfully synthesized to remove olefins from aromatics. The effects of type and quantity of precipitant, the concentration of impregnants and the calcination temperature were studied, and the synthesized samples were characterized by XRD, SEM, TG-DTG, FTIR, N_2 adsorption analysis and the FTIR pyridine adsorption(py-IR) techniques. This catalyst was found to be superiorly active as compared with the commercial ROC, which exhibited promising application prospects in industry. The optimum synthesis variables required that SZ was impregnated with 2.0 mol/L sulfuric acid and calcined at 650 ℃, and the precursor was precipitated by ammonium hydroxide to reach eventually a p H value of over 9.46. The addition of SO_4^(2-) species increased the amount of catalytically active t-ZrO_2, which was helpful to an increasing abundance of acid sites for enhancing the activity. Meanwhile, the calcination temperature had a great effect on the structure, composition and properties of sulfated zirconia.
基金the Sinopec Zhenhai Refining & Chemical Company for financial support
文摘1-Butyl-3-methylimidazolium bromochloroaluminate （[bmim]Br-AlCl3） ionic liquid was used as an acid catalyst for removal of trace olefins from the aromatic hydrocarbons. The influence of various reaction parameters such as reaction time, temperature, dosage and acid strength of catalyst was investigated. The experimental results demonstrated that the ionic liquid exhibited excellent activity under mild reaction conditions, with the conversion of olefins reaching 98.84% and the bromine index of the aromatics varying from 1129 to 13. On the basis of the results obtained, thereof, a possible reaction mechanism was proposed.
文摘The PRO/Ⅱ process simulation software was applied to carry out simulated calculation of the aromatics fractionation unit and the heat integrated rectification process was proposed for the aromatics fractionation section of the 1.0 Mt/a toluene disproportionation unit at the Zhenhai Refining and Chemical Company. The optimized operating parameters were obtained through the energy utilization analysis,process simulation,heat exchanger calculations and comparisons of utility consumption. The operation of commercialized unit has revealed that the design parameters of each rectification column were consistent with the operation results,and the utility consumption was about 47% lower than the traditional heat integrated process.
文摘A novel additive incorporated into the catalyst for removing trace olefins from aromatics was proposed, and under the laboratory conditions the lifetime of the catalyst was increased from 5 h to 8 h upon specifying the conversion of the olefins equating to more than 55% as a criterion. Catalyst production, which was named ROC, has been successfully scaled up from laboratory formulations to commercial scale manufacture and over 100 tons of catalyst had been produced. The superiority in catalytic activity was identified by the evaluation tests of the ROC catalyst based on whatever kind of feedstocks (with their bromine index ranging from 400 mgBr/100g to 1 200 mgBr/100g) being used as the feedstock. The X-ray diffraction patterns had verified that the additive was highly dispersed on the surface of catalyst; the GC-FID analysis results showed that the ROC catalyst could increase the xylene content; the pyridine-FTIR spectroscopic analyses suggested that the additive could increase the amount of the weak L acids, which was the main cause leading to enhancement of the catalyst activity.
文摘Reactor models were developed to describe the isomerization reaction process of C_(8) aromatics by applying a six-component sequential reaction network.Lab-scale experimental data were used in an axial bed reactor model,and dynamic parameters were fitted by simulated annealing algorithm.In addition,industrial data and calculated dynamic parameters were used to determine the six-component concentration distributions using a radial reactor model.The influence of back-mixing on reaction performance was investigated.It was found that the model considering back-mixing was much closer to the real industrial reaction process.
