A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back laye...A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back layer,was fabricated from a replica molding process.Anodic aluminum oxide(AAO)template was used as the replica mold to be replicated to the polymethylmethacrylate layer by a thermal infiltration process under a vacuum condition.Results indicate that PMMA/PDMS soft templates with different sizes could be easily fabricated from the as-prepared AAO replica mold.The PMMA/PDMS soft templates were then employed to imprint a TiO_2 gel for achieving TiO_2 nano-pore arrays.After the imprinting process,the PDMS layer was firstly peeled off and the PMMA layer was then removed into acetonitrile,which can avoid any demolding problems like damages or distortions.The TiO_2 nano-pore arrays with the crystalline of anatase could be obtained at a heat treatment temperature of 450°C.展开更多
Porous anodic aluminum oxide（AAO） templates, obtained by anodization of aluminum sheets at relatively high voltages, were used for fabricating branched platinum nanowires which copy the three-dimensional branching s...Porous anodic aluminum oxide（AAO） templates, obtained by anodization of aluminum sheets at relatively high voltages, were used for fabricating branched platinum nanowires which copy the three-dimensional branching structure of the nanochannels in the template. The formation of these branched nanochannels is the characteristic of AAO templates grown at 60 V in 0.15 mol/L H2C2O4 solution. When AAO templates are grown at 40 V or lower, straight channels and platinum nanowires are obtained. Platinum nanowires array was alter-current（AC）-electrodeposited in AAO at a lower frequency（20 Hz） and increasing voltage（5-15 V）. Compared with traditional AC electrodeposition condition, the deposition rate of platinum nanowires under this condition is slower and more controllable. Therefore, the platinum nanowires can perfectly copy the structure of the template. The as-obtained Al/AAO/Pt composite and branched platinum nanowires were characterized by X-ray diffraction（XRD） and transmission electron microscope（TEM）, respectively.展开更多
基金supported by the Ministry of Science and Technology of China through 863-project under grant 2009AA03Z218the Major Program of the National Natural Science Foundation of China under Grant No.90923012the Research Fund for the Doctoral Program of Higher Education of China under grant 200806980023
文摘A novel soft polymer template containing a double-layer structure,which includes a thin layer of polymethylmethacrylate(PMMA)used as a pattern layer and a thicker layer of polydimethylsiloxane(PDMS)used as a back layer,was fabricated from a replica molding process.Anodic aluminum oxide(AAO)template was used as the replica mold to be replicated to the polymethylmethacrylate layer by a thermal infiltration process under a vacuum condition.Results indicate that PMMA/PDMS soft templates with different sizes could be easily fabricated from the as-prepared AAO replica mold.The PMMA/PDMS soft templates were then employed to imprint a TiO_2 gel for achieving TiO_2 nano-pore arrays.After the imprinting process,the PDMS layer was firstly peeled off and the PMMA layer was then removed into acetonitrile,which can avoid any demolding problems like damages or distortions.The TiO_2 nano-pore arrays with the crystalline of anatase could be obtained at a heat treatment temperature of 450°C.
文摘Porous anodic aluminum oxide（AAO） templates, obtained by anodization of aluminum sheets at relatively high voltages, were used for fabricating branched platinum nanowires which copy the three-dimensional branching structure of the nanochannels in the template. The formation of these branched nanochannels is the characteristic of AAO templates grown at 60 V in 0.15 mol/L H2C2O4 solution. When AAO templates are grown at 40 V or lower, straight channels and platinum nanowires are obtained. Platinum nanowires array was alter-current（AC）-electrodeposited in AAO at a lower frequency（20 Hz） and increasing voltage（5-15 V）. Compared with traditional AC electrodeposition condition, the deposition rate of platinum nanowires under this condition is slower and more controllable. Therefore, the platinum nanowires can perfectly copy the structure of the template. The as-obtained Al/AAO/Pt composite and branched platinum nanowires were characterized by X-ray diffraction（XRD） and transmission electron microscope（TEM）, respectively.
