Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry （SGG） is introduced based on the variance-covariance matrix principl...Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry （SGG） is introduced based on the variance-covariance matrix principle. Secondly, a study for the requirements demonstration on the next-generation GOCE Follow-On satellite gravity gradiometry system is developed using different satellite orbital altitudes and measurement accuracies of satellite gravity gradiometer by the new analytical error model of SGG. The research results show that it is preferable to design satellite orbital altitudes of 300 km–400km and choose the measurement accuracies of 10-13/s2 –10-15/s2 from satellite gravity gradiometer. Finally, the complementarity of the four-stage satellite gravity missions, including past CHAMP, current GRACE, and GOCE, and next-generation GOCE Follow-On, is contrastively demonstrated for precisely recovering the Earth’s full-frequency gravitational field with high spatial resolution.展开更多
By using the Born-von Kfirmfin theory of lattice dynamics and the modified analytic embedded atom method, we reproduce the experimental results of the phonon dispersion in fcc metal Cu at zero pressure along three hig...By using the Born-von Kfirmfin theory of lattice dynamics and the modified analytic embedded atom method, we reproduce the experimental results of the phonon dispersion in fcc metal Cu at zero pressure along three high symmetry directions and four oft-symmetry directions, and then simulate the phonon dispersion curves of Cu at high pressures of 50, 100, and 150 GPa. The results show that the shapes of dispersion curves at high pressures are very similar to that at zero pressure. All the vibration frequencies of Cu in all vibration branches at high pressures are larger than the results at zero pressure, and increase correspondingly as pressure reaches 50, 100, and 150 GPa sequentially. Moreover, on the basis of phonon dispersion, we calculate the values of specific heat of Cu at different pressures. The prediction of thermodynamic quantities lays a significant foundation for guiding and judging experiments of thermodynamic properties of solids under high pressures.展开更多
The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with de...The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.展开更多
An analytical variational method for the ground state of the biased quantum Rabi model in the ultra-strong coupling regime is presented. This analytical variational method can be obtained by a unitary transformation o...An analytical variational method for the ground state of the biased quantum Rabi model in the ultra-strong coupling regime is presented. This analytical variational method can be obtained by a unitary transformation or alternatively by assuming the form of the ground state wave function. The key of the method is to introduce a variational parameter λ,which can be determined by minimizing the energy functional. Using this method, we calculate the physical observables with high accuracy in comparison with the numerical exact ones. Our method evidently improves over the widely used general rotating-wave approximation（GRWA） in both qualitative and quantitative aspects.展开更多
A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential c...A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential can be obtained by the method. The anharmonic oscillator potential and the rational potential are two important examples. Checked by numerical techniques, the results for the two potentials by the present method are proven to be exact and reliable.展开更多
In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our resul...In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our results agree with those obtained by Landau and Lifshitz [Landau L D and Lifshitz E M 1977 Quantum Mechanics （Non-relativistic Theory） （New York： Pergamon）], which proves that ATMM is a simple and effective method for quantum reflection.展开更多
Plasma density and temperature can be diagnosed by x-ray line emission measurement with crystal,and bent crystals such as von Hamos and Hall structures are proposed to improve the diffraction brightness.In this study,...Plasma density and temperature can be diagnosed by x-ray line emission measurement with crystal,and bent crystals such as von Hamos and Hall structures are proposed to improve the diffraction brightness.In this study,a straightforward solution for the focusing schemes of flat and bent crystals is provided.Simulations with XOP code are performed to validate the analytical model,and good agreements are achieved.The von Hamos or multi-cone crystal can lead to several hundred times intensity enhancements for a 200μm plasma source.This model benefits the applications of the focusing bent crystals.展开更多
Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and ...Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.展开更多
Tip splitting instability of cellular interface morphology in directional solidification is analyzed based on the bias field method proposed recently by Glicksman. The physical mechanism of tip instability is explaine...Tip splitting instability of cellular interface morphology in directional solidification is analyzed based on the bias field method proposed recently by Glicksman. The physical mechanism of tip instability is explained by analyzing the interface potential, the tangential energy flux, and the normal energy flux. A rigorous criterion for tip-splitting instability is established analytically, i.e., the ratio of the cellular tip radius to the cellular width α 〉3/2/π≈ 0.3899, which is in good agreement with simulation results. This study also reveals that the cellular tip splitting instability is attributable to weak Gibbs–Thomson energy acting on the interface.展开更多
In order to calculate the pressure distribution of radial grooved thrust bearing, analytical and numerical methods were applied respectively. Grooved region and land region were linked by u- sing the mass conservation...In order to calculate the pressure distribution of radial grooved thrust bearing, analytical and numerical methods were applied respectively. Grooved region and land region were linked by u- sing the mass conservations principle at the groove/land boundary in each method. The block-weight approach was implemented to deal with the non-coincidence of mesh and radial groove pattern in nu- merical method. It was observed that the numerical solutions had higher precision as mesh number exceed 70 x 70, and the relaxation iteration of differential scheme presented the fastest convergence speed when relaxation factor was close to 1.94.展开更多
In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detect...In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.展开更多
The present study presents a detailed report implemented to solve the problem that some of my students do not like the dialogue practice I assign them in class.It is hypothesized that the students' oral communicat...The present study presents a detailed report implemented to solve the problem that some of my students do not like the dialogue practice I assign them in class.It is hypothesized that the students' oral communication is increased by better-designed dialogue practice.This hypothesis is verified by a four-week practice of well-organized oral work activities.展开更多
Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly ...Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly not the situation in situ, where a rock bolt is subjected to both axial and shear/bending loads which determines its overall performance and failure behaviour. To demonstrate and analyse the shear displacement in bedded roof, scaled physical models of underground excavation were created. From the models it was found that the shear displacement between the layers depends on the vertical roof deformation and thickness of beds. To analyse the effect of combined loading on rock bolt design for suspension and beam building models, analytical methods were used to calculate the required spacing of rock bolt for a given safety factor. Numerical models were then created using Rocscience RS2 software to establish the stresses on the rock bolt. The results show a significant reduction in safety factor for suspension as demonstrated in an example(reduced from 3.5 to 2.0) and beam building(2.0 to 1.36) when the rock bolt capacities are calculated considering the effect of combined loading as opposed to just the axial or shear loads.展开更多
This paper proposes two lattice traffic models by taking into account the drivers＇ delay in response. The lattice versions of the hydrodynamic model are described by the differential-difference equation and differenc...This paper proposes two lattice traffic models by taking into account the drivers＇ delay in response. The lattice versions of the hydrodynamic model are described by the differential-difference equation and difference-difference equation, respectively. The stability conditions for the two models are obtained by using the linear stability theory. The modified KdV equation near the critical point is derived to describe the traffic jam by using the reductive perturbation method, and the kink-antikink soliton solutions related to the traffic density waves are obtained. The results show that the drivers＇ delay in sensing headway plays an important role in jamming transition.展开更多
The compressibility properties of systems consisting of generic rotating rigid triangles are analyzed and discussed. It is shown that these systems which are usually associated with auxeticity can exhibit strongly ani...The compressibility properties of systems consisting of generic rotating rigid triangles are analyzed and discussed. It is shown that these systems which are usually associated with auxeticity can exhibit strongly anisotropic properties for certain conformations, which may give rise to the anomalous property of negative linear compressibility （NLC）, that is, the system with particular geometry will expand along one direction when loaded hydrostatically. It is also shown that through carefully choosing the geometric features （i.e. the dimensions and the alignment of the rotating triangles as well as the angles between them） and the direction along which the linear compressibility is measured, one may control the magnitude and range of the NLC. All this provides a novel but effective method of manufacturing the systems which can be tailored to achieve particular values of NLC to fit particular practical applications.展开更多
The aim of this paper is to develop computational models for the ultimate compressive strength analysis of stiffened plate panels with nonuniform thickness.Modeling welding-induced initial deformations and residual st...The aim of this paper is to develop computational models for the ultimate compressive strength analysis of stiffened plate panels with nonuniform thickness.Modeling welding-induced initial deformations and residual stresses was presented with the measured data.Three methods,i.e.,ANSYS finite element method,ALPS/SPINE incremental Galerkin method,and ALPS/ULSAP analytical method,were employed together with existing test database obtained from a full-scale collapse testing of steel-stiffened plate structures.Sensitivity study was conducted with varying the difference in plate thickness to define a representative(equivalent)thickness for plate panels with nonuniform thickness.Guidelines are provided for structural modeling to compute the ultimate compressive strength of plate panels with variable thickness.展开更多
This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from el...This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from elastic-plastic mechanism theories for different structural components, including bottom girders, floors, bottom plating, and attached stiffeners. We verify this simplified analytical model by numerical simulation, and establish finite element models for a typical tanker hold and a rigid indenter representing seabed obstacles. Employing the LS-DYNA finite element solver, we conduct numerical simulations for shoal-grounding cases with a wide range of slope angles and indentation depths. In comparison with numerical simulations, we verify the proposed simplified analytical model with respect to the total energy dissipation and the horizontal grounding resistance. We also investigate the interaction effect of deformation patterns between bottom structure components. Our results show that the total energy dissipation and resistances predicted by the analytical model agree well with those from numerical simulations.展开更多
A new three-dimensional(3D)cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property.It is shown that this model has adjustable compressibility and does exhibit n...A new three-dimensional(3D)cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property.It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations.And further study shows that the images of compressibility are symmetrical about the certain lines,which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry.A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore,a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.展开更多
With modified analytical embedded-atom method and molecular dynamics simulation, this paper simulates the strain energy and the equilibrium core structure of a（100） edge dislocation in BCC metal iron on atomistic sc...With modified analytical embedded-atom method and molecular dynamics simulation, this paper simulates the strain energy and the equilibrium core structure of a（100） edge dislocation in BCC metal iron on atomistic scale. In addition, the trapping effect of dislocation on vacancy is investigated as well. The results show that the equilibrium dislocation core is quite narrow and has a C2v symmetry structure. Calculated strain energy Es of the dislocation is a linear function of ln（R/2b） while R ≥ 5.16 A（1A = 0.1 nm）, in excellent agreement with the elasticity theory prediction. Determined core radius and energy are 5.16 A and 0.62 eV/A, respectively. The closer the vacancy to the dislocation line is, the lower the vacancy formation energy is, this fact implies that the dislocation has a trend to trap the vacancy, especially for a separation distance of the vacancy from dislocation line being less than two lattice constants.展开更多
This paper applies the analytical transfer matrix method （ATMM） to calculate energy eigenvalues of a particle in low dimensional sharp confining potential for the first time, and deduces the quantization rules of th...This paper applies the analytical transfer matrix method （ATMM） to calculate energy eigenvalues of a particle in low dimensional sharp confining potential for the first time, and deduces the quantization rules of this system. It presents three cases in which the applied method works very well. In the first quantum dot, the energy eigenvalues and eigenfunction are obtained, and compared with those acquired from the exact numerical analysis and the WKB （Wentzel, Kramers and Brillouin） method; in the second or the third case, we get the energy eigenvalues by the ATMM, and compare them with the EBK （Einstein, Brillouin and Keller） results or the wavefunction outcomes. From the comparisons, we find that the semiclassical method （WKB, EBK or wavefunction） is inexact in such systems.展开更多
基金Project supported by the Main Direction Program of Knowledge Innovation of Chinese Academy of Sciences for Distinguished Young Scholar (Grant No. KZCX2-EW-QN114)the National Natural Science Foundation of China for Young Scholar (Grant Nos. 41004006, 41131067, 11173049, and 41202094)+5 种基金the Merit-based Scientific Research Foundation of the State Ministry of Human Resources and Social Security of China for Returned Overseas Chinese Scholars(Grant No. 2011)the Open Research Fund Program of the Key Laboratory of Computational Geodynamics of Chinese Academy of Sciences (Grant No. 2011-04)the Open Research Fund Program of the Key Laboratory of Geospace Environment and Geodesy, Ministry of Education, China (Grant No. 11-01-02)the Open Research Fund Program of the Key Laboratory of Geo-Informatics of National Administration of Surveying, Mapping and Geoinformation of China(Grant No. 201322)the Open Fund of State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation (Grant No. PLN1113)the Foundation of State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Beijing (Grant No. PRP/open-1206)
文摘Firstly, a new analytical error model of the cumulative geoid height using the three-dimensional diagonal tensors of satellite gravity gradiometry （SGG） is introduced based on the variance-covariance matrix principle. Secondly, a study for the requirements demonstration on the next-generation GOCE Follow-On satellite gravity gradiometry system is developed using different satellite orbital altitudes and measurement accuracies of satellite gravity gradiometer by the new analytical error model of SGG. The research results show that it is preferable to design satellite orbital altitudes of 300 km–400km and choose the measurement accuracies of 10-13/s2 –10-15/s2 from satellite gravity gradiometer. Finally, the complementarity of the four-stage satellite gravity missions, including past CHAMP, current GRACE, and GOCE, and next-generation GOCE Follow-On, is contrastively demonstrated for precisely recovering the Earth’s full-frequency gravitational field with high spatial resolution.
基金supported by the National Natural Science Foundation of China (Grant Nos. 61078057 and 11204227)the Scientific Research Program of Education Department of Shaanxi Province, China (Grant No. 12JK0958)
文摘By using the Born-von Kfirmfin theory of lattice dynamics and the modified analytic embedded atom method, we reproduce the experimental results of the phonon dispersion in fcc metal Cu at zero pressure along three high symmetry directions and four oft-symmetry directions, and then simulate the phonon dispersion curves of Cu at high pressures of 50, 100, and 150 GPa. The results show that the shapes of dispersion curves at high pressures are very similar to that at zero pressure. All the vibration frequencies of Cu in all vibration branches at high pressures are larger than the results at zero pressure, and increase correspondingly as pressure reaches 50, 100, and 150 GPa sequentially. Moreover, on the basis of phonon dispersion, we calculate the values of specific heat of Cu at different pressures. The prediction of thermodynamic quantities lays a significant foundation for guiding and judging experiments of thermodynamic properties of solids under high pressures.
文摘The purpose of this study was to investigate the effect of bolt profile on load transfer mechanism of fully grouted bolts in jointed rocks using analytical and numerical methods. Based on the analytical method with development of methods, a new model is presented. To validate the analytical model, five different profiles modeled by ANSYS software. The profile of rock bolts T3 and T4with load transfer capacity,respectively 180 and 195 kN in the jointed rocks was selected as the optimum profiles. Finally, the selected profiles were examined in Tabas Coal Mine. FLAC analysis indicates that patterns 6+7 with2 NO flexi bolt 4 m better than other patterns within the faulted zone.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11674139,11604009,and 11704025)the Program for Changjiang Scholars and Innovative Research Team in University,China(Grant No.IRT-16R35)+1 种基金the Fundamental Research Funds for the Central Universities,Chinathe financial support of the Future and Emerging Technologies(FET)programme within the Seventh Framework Programme for Research of the European Commission,under FET-Open Grant No.618083(CNTQC)
文摘An analytical variational method for the ground state of the biased quantum Rabi model in the ultra-strong coupling regime is presented. This analytical variational method can be obtained by a unitary transformation or alternatively by assuming the form of the ground state wave function. The key of the method is to introduce a variational parameter λ,which can be determined by minimizing the energy functional. Using this method, we calculate the physical observables with high accuracy in comparison with the numerical exact ones. Our method evidently improves over the widely used general rotating-wave approximation（GRWA） in both qualitative and quantitative aspects.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 60877055 and 60806041)the Shanghai Rising-Star Program,China (Grant No. 08QA14030)+1 种基金the Innovation Funds for Graduates of Shanghai University,China (Grant No. SHUCX092021)the Foundation of the Science and Technology Commission of Shanghai Municipality,China (Grant No. 08JC14097)
文摘A detailed procedure based on an analytical transfer matrix method is presented to solve bound-state problems. The derivation is strict and complete. The energy eigenvalues for an arbitrary one-dimensional potential can be obtained by the method. The anharmonic oscillator potential and the rational potential are two important examples. Checked by numerical techniques, the results for the two potentials by the present method are proven to be exact and reliable.
基金Project supported by Science Foundation of Nantong University (Grant Nos. 03080122 and 09ZY001)
文摘In this paper, the analytical transfer matrix method （ATMM） is applied to study the properties of quantum reflection in three systems： a sech2 barrier, a ramp potential and an inverse harmonic oscillator. Our results agree with those obtained by Landau and Lifshitz [Landau L D and Lifshitz E M 1977 Quantum Mechanics （Non-relativistic Theory） （New York： Pergamon）], which proves that ATMM is a simple and effective method for quantum reflection.
基金Project supported by the National Natural Science Fundation of China(Grant Nos.11775203 and 12075219)the China Academy of Engineering Physics(CAEP)Foundation(Grant No.CX20210019).
文摘Plasma density and temperature can be diagnosed by x-ray line emission measurement with crystal,and bent crystals such as von Hamos and Hall structures are proposed to improve the diffraction brightness.In this study,a straightforward solution for the focusing schemes of flat and bent crystals is provided.Simulations with XOP code are performed to validate the analytical model,and good agreements are achieved.The von Hamos or multi-cone crystal can lead to several hundred times intensity enhancements for a 200μm plasma source.This model benefits the applications of the focusing bent crystals.
文摘Alunite is the most important non bauxite resource for alumina. Various methods have been proposed and patented for processing alunite, but none has been performed at industrial scale and no technical,operational and economic data is available to evaluate methods. In addition, selecting the right approach for alunite beneficiation, requires introducing a wide range of criteria and careful analysis of alternatives.In this research, after studying the existing processes, 13 methods were considered and evaluated by 14 technical, economic and environmental analyzing criteria. Due to multiplicity of processing methods and attributes, in this paper, Multi Attribute Decision Making methods were employed to examine the appropriateness of choices. The Delphi Analytical Hierarchy Process(DAHP) was used for weighting selection criteria and Fuzzy TOPSIS approach was used to determine the most profitable candidates. Among 13 studied methods, Spanish, Svoronos and Hazan methods were respectively recognized to be the best choices.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB610401)the National Natural Science Foundation of China(Grant No.51371151)the Free Research Fund of State Key Laboratory of Solidification Processing,China(Grant No.100-QP-2014)
文摘Tip splitting instability of cellular interface morphology in directional solidification is analyzed based on the bias field method proposed recently by Glicksman. The physical mechanism of tip instability is explained by analyzing the interface potential, the tangential energy flux, and the normal energy flux. A rigorous criterion for tip-splitting instability is established analytically, i.e., the ratio of the cellular tip radius to the cellular width α 〉3/2/π≈ 0.3899, which is in good agreement with simulation results. This study also reveals that the cellular tip splitting instability is attributable to weak Gibbs–Thomson energy acting on the interface.
基金Supported by the Ministerial Level Foundation(2220060029)
文摘In order to calculate the pressure distribution of radial grooved thrust bearing, analytical and numerical methods were applied respectively. Grooved region and land region were linked by u- sing the mass conservations principle at the groove/land boundary in each method. The block-weight approach was implemented to deal with the non-coincidence of mesh and radial groove pattern in nu- merical method. It was observed that the numerical solutions had higher precision as mesh number exceed 70 x 70, and the relaxation iteration of differential scheme presented the fastest convergence speed when relaxation factor was close to 1.94.
文摘In high-altitude nuclear detonations,the proportion of pulsed X-ray energy can exceed 70%,making it a specific monitoring signal for such events.These pulsed X-rays can be captured using a satellite-borne X-ray detector following atmospheric transmission.To quantitatively analyze the effects of different satellite detection altitudes,burst heights,and transmission angles on the physical processes of X-ray transport and energy fluence,we developed an atmospheric transmission algorithm for pulsed X-rays from high-altitude nuclear detonations based on scattering correction.The proposed method is an improvement over the traditional analytical method that only computes direct-transmission X-rays.The traditional analytical method exhibits a maximum relative error of 67.79% compared with the Monte Carlo method.Our improved method reduces this error to within 10% under the same conditions,even reaching 1% in certain scenarios.Moreover,its computation time is 48,000 times faster than that of the Monte Carlo method.These results have important theoretical significance and engineering application value for designing satellite-borne nuclear detonation pulsed X-ray detectors,inverting nuclear detonation source terms,and assessing ionospheric effects.
文摘The present study presents a detailed report implemented to solve the problem that some of my students do not like the dialogue practice I assign them in class.It is hypothesized that the students' oral communication is increased by better-designed dialogue practice.This hypothesis is verified by a four-week practice of well-organized oral work activities.
基金This work was supported by the Minerals Research Institute of Western Australia(MRIWA)Mining3 and Peabody Energy.
文摘Proper design of rock bolt support in underground mines is critical to avoid incidents, accidents and loss of production. The traditional design approach only considers the axial(tensile) capacity and this is clearly not the situation in situ, where a rock bolt is subjected to both axial and shear/bending loads which determines its overall performance and failure behaviour. To demonstrate and analyse the shear displacement in bedded roof, scaled physical models of underground excavation were created. From the models it was found that the shear displacement between the layers depends on the vertical roof deformation and thickness of beds. To analyse the effect of combined loading on rock bolt design for suspension and beam building models, analytical methods were used to calculate the required spacing of rock bolt for a given safety factor. Numerical models were then created using Rocscience RS2 software to establish the stresses on the rock bolt. The results show a significant reduction in safety factor for suspension as demonstrated in an example(reduced from 3.5 to 2.0) and beam building(2.0 to 1.36) when the rock bolt capacities are calculated considering the effect of combined loading as opposed to just the axial or shear loads.
基金Project supported by the National Basic Research Program of China (Grant No 2006CB705500)the National Natural Science Foundation of China (Grant No 10532060)+1 种基金the Natural Science Foundation of Ningbo (Grant Nos 2008A610022 and 2007A610050)K. C. Wang Magna Fund in Ningbo University, China
文摘This paper proposes two lattice traffic models by taking into account the drivers＇ delay in response. The lattice versions of the hydrodynamic model are described by the differential-difference equation and difference-difference equation, respectively. The stability conditions for the two models are obtained by using the linear stability theory. The modified KdV equation near the critical point is derived to describe the traffic jam by using the reductive perturbation method, and the kink-antikink soliton solutions related to the traffic density waves are obtained. The results show that the drivers＇ delay in sensing headway plays an important role in jamming transition.
基金Project supported by the National Natural Science Foundation of China(Grant No.51475208)
文摘The compressibility properties of systems consisting of generic rotating rigid triangles are analyzed and discussed. It is shown that these systems which are usually associated with auxeticity can exhibit strongly anisotropic properties for certain conformations, which may give rise to the anomalous property of negative linear compressibility （NLC）, that is, the system with particular geometry will expand along one direction when loaded hydrostatically. It is also shown that through carefully choosing the geometric features （i.e. the dimensions and the alignment of the rotating triangles as well as the angles between them） and the direction along which the linear compressibility is measured, one may control the magnitude and range of the NLC. All this provides a novel but effective method of manufacturing the systems which can be tailored to achieve particular values of NLC to fit particular practical applications.
文摘The aim of this paper is to develop computational models for the ultimate compressive strength analysis of stiffened plate panels with nonuniform thickness.Modeling welding-induced initial deformations and residual stresses was presented with the measured data.Three methods,i.e.,ANSYS finite element method,ALPS/SPINE incremental Galerkin method,and ALPS/ULSAP analytical method,were employed together with existing test database obtained from a full-scale collapse testing of steel-stiffened plate structures.Sensitivity study was conducted with varying the difference in plate thickness to define a representative(equivalent)thickness for plate panels with nonuniform thickness.Guidelines are provided for structural modeling to compute the ultimate compressive strength of plate panels with variable thickness.
基金financially supported by the National Natural Science Fundation of China(Grant No.51239007)
文摘This study presents a simplified analytical model for predicting the structural responses of double-bottom ships in a shoal grounding scenario. This solution is based on a series of analytical models developed from elastic-plastic mechanism theories for different structural components, including bottom girders, floors, bottom plating, and attached stiffeners. We verify this simplified analytical model by numerical simulation, and establish finite element models for a typical tanker hold and a rigid indenter representing seabed obstacles. Employing the LS-DYNA finite element solver, we conduct numerical simulations for shoal-grounding cases with a wide range of slope angles and indentation depths. In comparison with numerical simulations, we verify the proposed simplified analytical model with respect to the total energy dissipation and the horizontal grounding resistance. We also investigate the interaction effect of deformation patterns between bottom structure components. Our results show that the total energy dissipation and resistances predicted by the analytical model agree well with those from numerical simulations.
基金the National Natural Science Foundation of China(Grant Nos.U1601203 and U19A20104)the Jilin Provincial Science and Technology Development Program,China(Grant Nos.20180101321JC and 20190302099GX)+2 种基金the Jilin Provincial Industrial Technology of Research and Development,China(Grant No.2019C037-3)the Science and Technology Project of Jilin Provincial Department of Education,China(Grant No.JJKH20200955KJ)the Graduate Innovation Fund of Jilin University,China(Grant No.101832018C191).
文摘A new three-dimensional(3D)cellular model based on hinging open-cell Kelvin structure is proposed for its negative compressibility property.It is shown that this model has adjustable compressibility and does exhibit negative compressibility for some certain conformations.And further study shows that the images of compressibility are symmetrical about the certain lines,which indicates that the mechanical properties of the model in the three axial directions are interchangeable and the model itself has a certain geometric symmetry.A comparison of the Kelvin model with its anisotropic form with the dodecahedron model shows that the Kelvin model has stronger negative compressibility property in all three directions.Therefore,a new and potential method to improve negative compressibility property can be derived by selecting the system type with lower symmetry and increasing the number of geometric parameters.
基金supported by the State Key Development Program for Basic Research of China (Grant No. 2004CB619302)the National Natural Science Foundation of China (Grant No. 51071098)
文摘With modified analytical embedded-atom method and molecular dynamics simulation, this paper simulates the strain energy and the equilibrium core structure of a（100） edge dislocation in BCC metal iron on atomistic scale. In addition, the trapping effect of dislocation on vacancy is investigated as well. The results show that the equilibrium dislocation core is quite narrow and has a C2v symmetry structure. Calculated strain energy Es of the dislocation is a linear function of ln（R/2b） while R ≥ 5.16 A（1A = 0.1 nm）, in excellent agreement with the elasticity theory prediction. Determined core radius and energy are 5.16 A and 0.62 eV/A, respectively. The closer the vacancy to the dislocation line is, the lower the vacancy formation energy is, this fact implies that the dislocation has a trend to trap the vacancy, especially for a separation distance of the vacancy from dislocation line being less than two lattice constants.
文摘This paper applies the analytical transfer matrix method （ATMM） to calculate energy eigenvalues of a particle in low dimensional sharp confining potential for the first time, and deduces the quantization rules of this system. It presents three cases in which the applied method works very well. In the first quantum dot, the energy eigenvalues and eigenfunction are obtained, and compared with those acquired from the exact numerical analysis and the WKB （Wentzel, Kramers and Brillouin） method; in the second or the third case, we get the energy eigenvalues by the ATMM, and compare them with the EBK （Einstein, Brillouin and Keller） results or the wavefunction outcomes. From the comparisons, we find that the semiclassical method （WKB, EBK or wavefunction） is inexact in such systems.
